summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb-frontends/sp8870.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb-frontends/sp8870.c')
-rw-r--r--drivers/media/dvb-frontends/sp8870.c620
1 files changed, 620 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c
new file mode 100644
index 00000000000..e37274c8f14
--- /dev/null
+++ b/drivers/media/dvb-frontends/sp8870.c
@@ -0,0 +1,620 @@
+/*
+ Driver for Spase SP8870 demodulator
+
+ Copyright (C) 1999 Juergen Peitz
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+/*
+ * This driver needs external firmware. Please use the command
+ * "<kerneldir>/Documentation/dvb/get_dvb_firmware alps_tdlb7" to
+ * download/extract it, and then copy it to /usr/lib/hotplug/firmware
+ * or /lib/firmware (depending on configuration of firmware hotplug).
+ */
+#define SP8870_DEFAULT_FIRMWARE "dvb-fe-sp8870.fw"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "dvb_frontend.h"
+#include "sp8870.h"
+
+
+struct sp8870_state {
+
+ struct i2c_adapter* i2c;
+
+ const struct sp8870_config* config;
+
+ struct dvb_frontend frontend;
+
+ /* demodulator private data */
+ u8 initialised:1;
+};
+
+static int debug;
+#define dprintk(args...) \
+ do { \
+ if (debug) printk(KERN_DEBUG "sp8870: " args); \
+ } while (0)
+
+/* firmware size for sp8870 */
+#define SP8870_FIRMWARE_SIZE 16382
+
+/* starting point for firmware in file 'Sc_main.mc' */
+#define SP8870_FIRMWARE_OFFSET 0x0A
+
+static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
+{
+ u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
+ struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
+ int err;
+
+ if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+ dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int sp8870_readreg (struct sp8870_state* state, u16 reg)
+{
+ int ret;
+ u8 b0 [] = { reg >> 8 , reg & 0xff };
+ u8 b1 [] = { 0, 0 };
+ struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 } };
+
+ ret = i2c_transfer (state->i2c, msg, 2);
+
+ if (ret != 2) {
+ dprintk("%s: readreg error (ret == %i)\n", __func__, ret);
+ return -1;
+ }
+
+ return (b1[0] << 8 | b1[1]);
+}
+
+static int sp8870_firmware_upload (struct sp8870_state* state, const struct firmware *fw)
+{
+ struct i2c_msg msg;
+ const char *fw_buf = fw->data;
+ int fw_pos;
+ u8 tx_buf[255];
+ int tx_len;
+ int err = 0;
+
+ dprintk ("%s: ...\n", __func__);
+
+ if (fw->size < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET)
+ return -EINVAL;
+
+ // system controller stop
+ sp8870_writereg(state, 0x0F00, 0x0000);
+
+ // instruction RAM register hiword
+ sp8870_writereg(state, 0x8F08, ((SP8870_FIRMWARE_SIZE / 2) & 0xFFFF));
+
+ // instruction RAM MWR
+ sp8870_writereg(state, 0x8F0A, ((SP8870_FIRMWARE_SIZE / 2) >> 16));
+
+ // do firmware upload
+ fw_pos = SP8870_FIRMWARE_OFFSET;
+ while (fw_pos < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET){
+ tx_len = (fw_pos <= SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - 252) ? 252 : SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - fw_pos;
+ // write register 0xCF0A
+ tx_buf[0] = 0xCF;
+ tx_buf[1] = 0x0A;
+ memcpy(&tx_buf[2], fw_buf + fw_pos, tx_len);
+ msg.addr = state->config->demod_address;
+ msg.flags = 0;
+ msg.buf = tx_buf;
+ msg.len = tx_len + 2;
+ if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+ printk("%s: firmware upload failed!\n", __func__);
+ printk ("%s: i2c error (err == %i)\n", __func__, err);
+ return err;
+ }
+ fw_pos += tx_len;
+ }
+
+ dprintk ("%s: done!\n", __func__);
+ return 0;
+};
+
+static void sp8870_microcontroller_stop (struct sp8870_state* state)
+{
+ sp8870_writereg(state, 0x0F08, 0x000);
+ sp8870_writereg(state, 0x0F09, 0x000);
+
+ // microcontroller STOP
+ sp8870_writereg(state, 0x0F00, 0x000);
+}
+
+static void sp8870_microcontroller_start (struct sp8870_state* state)
+{
+ sp8870_writereg(state, 0x0F08, 0x000);
+ sp8870_writereg(state, 0x0F09, 0x000);
+
+ // microcontroller START
+ sp8870_writereg(state, 0x0F00, 0x001);
+ // not documented but if we don't read 0x0D01 out here
+ // we don't get a correct data valid signal
+ sp8870_readreg(state, 0x0D01);
+}
+
+static int sp8870_read_data_valid_signal(struct sp8870_state* state)
+{
+ return (sp8870_readreg(state, 0x0D02) > 0);
+}
+
+static int configure_reg0xc05 (struct dtv_frontend_properties *p, u16 *reg0xc05)
+{
+ int known_parameters = 1;
+
+ *reg0xc05 = 0x000;
+
+ switch (p->modulation) {
+ case QPSK:
+ break;
+ case QAM_16:
+ *reg0xc05 |= (1 << 10);
+ break;
+ case QAM_64:
+ *reg0xc05 |= (2 << 10);
+ break;
+ case QAM_AUTO:
+ known_parameters = 0;
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ switch (p->hierarchy) {
+ case HIERARCHY_NONE:
+ break;
+ case HIERARCHY_1:
+ *reg0xc05 |= (1 << 7);
+ break;
+ case HIERARCHY_2:
+ *reg0xc05 |= (2 << 7);
+ break;
+ case HIERARCHY_4:
+ *reg0xc05 |= (3 << 7);
+ break;
+ case HIERARCHY_AUTO:
+ known_parameters = 0;
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ switch (p->code_rate_HP) {
+ case FEC_1_2:
+ break;
+ case FEC_2_3:
+ *reg0xc05 |= (1 << 3);
+ break;
+ case FEC_3_4:
+ *reg0xc05 |= (2 << 3);
+ break;
+ case FEC_5_6:
+ *reg0xc05 |= (3 << 3);
+ break;
+ case FEC_7_8:
+ *reg0xc05 |= (4 << 3);
+ break;
+ case FEC_AUTO:
+ known_parameters = 0;
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ if (known_parameters)
+ *reg0xc05 |= (2 << 1); /* use specified parameters */
+ else
+ *reg0xc05 |= (1 << 1); /* enable autoprobing */
+
+ return 0;
+}
+
+static int sp8870_wake_up(struct sp8870_state* state)
+{
+ // enable TS output and interface pins
+ return sp8870_writereg(state, 0xC18, 0x00D);
+}
+
+static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct sp8870_state* state = fe->demodulator_priv;
+ int err;
+ u16 reg0xc05;
+
+ if ((err = configure_reg0xc05(p, &reg0xc05)))
+ return err;
+
+ // system controller stop
+ sp8870_microcontroller_stop(state);
+
+ // set tuner parameters
+ if (fe->ops.tuner_ops.set_params) {
+ fe->ops.tuner_ops.set_params(fe);
+ if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+
+ // sample rate correction bit [23..17]
+ sp8870_writereg(state, 0x0319, 0x000A);
+
+ // sample rate correction bit [16..0]
+ sp8870_writereg(state, 0x031A, 0x0AAB);
+
+ // integer carrier offset
+ sp8870_writereg(state, 0x0309, 0x0400);
+
+ // fractional carrier offset
+ sp8870_writereg(state, 0x030A, 0x0000);
+
+ // filter for 6/7/8 Mhz channel
+ if (p->bandwidth_hz == 6000000)
+ sp8870_writereg(state, 0x0311, 0x0002);
+ else if (p->bandwidth_hz == 7000000)
+ sp8870_writereg(state, 0x0311, 0x0001);
+ else
+ sp8870_writereg(state, 0x0311, 0x0000);
+
+ // scan order: 2k first = 0x0000, 8k first = 0x0001
+ if (p->transmission_mode == TRANSMISSION_MODE_2K)
+ sp8870_writereg(state, 0x0338, 0x0000);
+ else
+ sp8870_writereg(state, 0x0338, 0x0001);
+
+ sp8870_writereg(state, 0xc05, reg0xc05);
+
+ // read status reg in order to clear pending irqs
+ sp8870_readreg(state, 0x200);
+
+ // system controller start
+ sp8870_microcontroller_start(state);
+
+ return 0;
+}
+
+static int sp8870_init (struct dvb_frontend* fe)
+{
+ struct sp8870_state* state = fe->demodulator_priv;
+ const struct firmware *fw = NULL;
+
+ sp8870_wake_up(state);
+ if (state->initialised) return 0;
+ state->initialised = 1;
+
+ dprintk ("%s\n", __func__);
+
+
+ /* request the firmware, this will block until someone uploads it */
+ printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
+ if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
+ printk("sp8870: no firmware upload (timeout or file not found?)\n");
+ return -EIO;
+ }
+
+ if (sp8870_firmware_upload(state, fw)) {
+ printk("sp8870: writing firmware to device failed\n");
+ release_firmware(fw);
+ return -EIO;
+ }
+ release_firmware(fw);
+ printk("sp8870: firmware upload complete\n");
+
+ /* enable TS output and interface pins */
+ sp8870_writereg(state, 0xc18, 0x00d);
+
+ // system controller stop
+ sp8870_microcontroller_stop(state);
+
+ // ADC mode
+ sp8870_writereg(state, 0x0301, 0x0003);
+
+ // Reed Solomon parity bytes passed to output
+ sp8870_writereg(state, 0x0C13, 0x0001);
+
+ // MPEG clock is suppressed if no valid data
+ sp8870_writereg(state, 0x0C14, 0x0001);
+
+ /* bit 0x010: enable data valid signal */
+ sp8870_writereg(state, 0x0D00, 0x010);
+ sp8870_writereg(state, 0x0D01, 0x000);
+
+ return 0;
+}
+
+static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status)
+{
+ struct sp8870_state* state = fe->demodulator_priv;
+ int status;
+ int signal;
+
+ *fe_status = 0;
+
+ status = sp8870_readreg (state, 0x0200);
+ if (status < 0)
+ return -EIO;
+
+ signal = sp8870_readreg (state, 0x0303);
+ if (signal < 0)
+ return -EIO;
+
+ if (signal > 0x0F)
+ *fe_status |= FE_HAS_SIGNAL;
+ if (status & 0x08)
+ *fe_status |= FE_HAS_SYNC;
+ if (status & 0x04)
+ *fe_status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_VITERBI;
+
+ return 0;
+}
+
+static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber)
+{
+ struct sp8870_state* state = fe->demodulator_priv;
+ int ret;
+ u32 tmp;
+
+ *ber = 0;
+
+ ret = sp8870_readreg(state, 0xC08);
+ if (ret < 0)
+ return -EIO;
+
+ tmp = ret & 0x3F;
+
+ ret = sp8870_readreg(state, 0xC07);
+ if (ret < 0)
+ return -EIO;
+
+ tmp = ret << 6;
+
+ if (tmp >= 0x3FFF0)
+ tmp = ~0;
+
+ *ber = tmp;
+
+ return 0;
+}
+
+static int sp8870_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
+{
+ struct sp8870_state* state = fe->demodulator_priv;
+ int ret;
+ u16 tmp;
+
+ *signal = 0;
+
+ ret = sp8870_readreg (state, 0x306);
+ if (ret < 0)
+ return -EIO;
+
+ tmp = ret << 8;
+
+ ret = sp8870_readreg (state, 0x303);
+ if (ret < 0)
+ return -EIO;
+
+ tmp |= ret;
+
+ if (tmp)
+ *signal = 0xFFFF - tmp;
+
+ return 0;
+}
+
+static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks)
+{
+ struct sp8870_state* state = fe->demodulator_priv;
+ int ret;
+
+ *ublocks = 0;
+
+ ret = sp8870_readreg(state, 0xC0C);
+ if (ret < 0)
+ return -EIO;
+
+ if (ret == 0xFFFF)
+ ret = ~0;
+
+ *ublocks = ret;
+
+ return 0;
+}
+
+/* number of trials to recover from lockup */
+#define MAXTRIALS 5
+/* maximum checks for data valid signal */
+#define MAXCHECKS 100
+
+/* only for debugging: counter for detected lockups */
+static int lockups;
+/* only for debugging: counter for channel switches */
+static int switches;
+
+static int sp8870_set_frontend(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct sp8870_state* state = fe->demodulator_priv;
+
+ /*
+ The firmware of the sp8870 sometimes locks up after setting frontend parameters.
+ We try to detect this by checking the data valid signal.
+ If it is not set after MAXCHECKS we try to recover the lockup by setting
+ the frontend parameters again.
+ */
+
+ int err = 0;
+ int valid = 0;
+ int trials = 0;
+ int check_count = 0;
+
+ dprintk("%s: frequency = %i\n", __func__, p->frequency);
+
+ for (trials = 1; trials <= MAXTRIALS; trials++) {
+
+ err = sp8870_set_frontend_parameters(fe);
+ if (err)
+ return err;
+
+ for (check_count = 0; check_count < MAXCHECKS; check_count++) {
+// valid = ((sp8870_readreg(i2c, 0x0200) & 4) == 0);
+ valid = sp8870_read_data_valid_signal(state);
+ if (valid) {
+ dprintk("%s: delay = %i usec\n",
+ __func__, check_count * 10);
+ break;
+ }
+ udelay(10);
+ }
+ if (valid)
+ break;
+ }
+
+ if (!valid) {
+ printk("%s: firmware crash!!!!!!\n", __func__);
+ return -EIO;
+ }
+
+ if (debug) {
+ if (valid) {
+ if (trials > 1) {
+ printk("%s: firmware lockup!!!\n", __func__);
+ printk("%s: recovered after %i trial(s))\n", __func__, trials - 1);
+ lockups++;
+ }
+ }
+ switches++;
+ printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups);
+ }
+
+ return 0;
+}
+
+static int sp8870_sleep(struct dvb_frontend* fe)
+{
+ struct sp8870_state* state = fe->demodulator_priv;
+
+ // tristate TS output and disable interface pins
+ return sp8870_writereg(state, 0xC18, 0x000);
+}
+
+static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
+{
+ fesettings->min_delay_ms = 350;
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
+ return 0;
+}
+
+static int sp8870_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
+{
+ struct sp8870_state* state = fe->demodulator_priv;
+
+ if (enable) {
+ return sp8870_writereg(state, 0x206, 0x001);
+ } else {
+ return sp8870_writereg(state, 0x206, 0x000);
+ }
+}
+
+static void sp8870_release(struct dvb_frontend* fe)
+{
+ struct sp8870_state* state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static struct dvb_frontend_ops sp8870_ops;
+
+struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct sp8870_state* state = NULL;
+
+ /* allocate memory for the internal state */
+ state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
+ if (state == NULL) goto error;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ state->initialised = 0;
+
+ /* check if the demod is there */
+ if (sp8870_readreg(state, 0x0200) < 0) goto error;
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &sp8870_ops, sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+
+static struct dvb_frontend_ops sp8870_ops = {
+ .delsys = { SYS_DVBT },
+ .info = {
+ .name = "Spase SP8870 DVB-T",
+ .frequency_min = 470000000,
+ .frequency_max = 860000000,
+ .frequency_stepsize = 166666,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 |
+ FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER
+ },
+
+ .release = sp8870_release,
+
+ .init = sp8870_init,
+ .sleep = sp8870_sleep,
+ .i2c_gate_ctrl = sp8870_i2c_gate_ctrl,
+
+ .set_frontend = sp8870_set_frontend,
+ .get_tune_settings = sp8870_get_tune_settings,
+
+ .read_status = sp8870_read_status,
+ .read_ber = sp8870_read_ber,
+ .read_signal_strength = sp8870_read_signal_strength,
+ .read_ucblocks = sp8870_read_uncorrected_blocks,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("Spase SP8870 DVB-T Demodulator driver");
+MODULE_AUTHOR("Juergen Peitz");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(sp8870_attach);