diff options
Diffstat (limited to 'drivers/media/dvb-frontends/sp8870.c')
| -rw-r--r-- | drivers/media/dvb-frontends/sp8870.c | 620 |
1 files changed, 620 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c new file mode 100644 index 00000000000..e37274c8f14 --- /dev/null +++ b/drivers/media/dvb-frontends/sp8870.c @@ -0,0 +1,620 @@ +/* + Driver for Spase SP8870 demodulator + + Copyright (C) 1999 Juergen Peitz + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ +/* + * This driver needs external firmware. Please use the command + * "<kerneldir>/Documentation/dvb/get_dvb_firmware alps_tdlb7" to + * download/extract it, and then copy it to /usr/lib/hotplug/firmware + * or /lib/firmware (depending on configuration of firmware hotplug). + */ +#define SP8870_DEFAULT_FIRMWARE "dvb-fe-sp8870.fw" + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/slab.h> + +#include "dvb_frontend.h" +#include "sp8870.h" + + +struct sp8870_state { + + struct i2c_adapter* i2c; + + const struct sp8870_config* config; + + struct dvb_frontend frontend; + + /* demodulator private data */ + u8 initialised:1; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "sp8870: " args); \ + } while (0) + +/* firmware size for sp8870 */ +#define SP8870_FIRMWARE_SIZE 16382 + +/* starting point for firmware in file 'Sc_main.mc' */ +#define SP8870_FIRMWARE_OFFSET 0x0A + +static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data) +{ + u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 }; + int err; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +static int sp8870_readreg (struct sp8870_state* state, u16 reg) +{ + int ret; + u8 b0 [] = { reg >> 8 , reg & 0xff }; + u8 b1 [] = { 0, 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 } }; + + ret = i2c_transfer (state->i2c, msg, 2); + + if (ret != 2) { + dprintk("%s: readreg error (ret == %i)\n", __func__, ret); + return -1; + } + + return (b1[0] << 8 | b1[1]); +} + +static int sp8870_firmware_upload (struct sp8870_state* state, const struct firmware *fw) +{ + struct i2c_msg msg; + const char *fw_buf = fw->data; + int fw_pos; + u8 tx_buf[255]; + int tx_len; + int err = 0; + + dprintk ("%s: ...\n", __func__); + + if (fw->size < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET) + return -EINVAL; + + // system controller stop + sp8870_writereg(state, 0x0F00, 0x0000); + + // instruction RAM register hiword + sp8870_writereg(state, 0x8F08, ((SP8870_FIRMWARE_SIZE / 2) & 0xFFFF)); + + // instruction RAM MWR + sp8870_writereg(state, 0x8F0A, ((SP8870_FIRMWARE_SIZE / 2) >> 16)); + + // do firmware upload + fw_pos = SP8870_FIRMWARE_OFFSET; + while (fw_pos < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET){ + tx_len = (fw_pos <= SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - 252) ? 252 : SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - fw_pos; + // write register 0xCF0A + tx_buf[0] = 0xCF; + tx_buf[1] = 0x0A; + memcpy(&tx_buf[2], fw_buf + fw_pos, tx_len); + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.buf = tx_buf; + msg.len = tx_len + 2; + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + printk("%s: firmware upload failed!\n", __func__); + printk ("%s: i2c error (err == %i)\n", __func__, err); + return err; + } + fw_pos += tx_len; + } + + dprintk ("%s: done!\n", __func__); + return 0; +}; + +static void sp8870_microcontroller_stop (struct sp8870_state* state) +{ + sp8870_writereg(state, 0x0F08, 0x000); + sp8870_writereg(state, 0x0F09, 0x000); + + // microcontroller STOP + sp8870_writereg(state, 0x0F00, 0x000); +} + +static void sp8870_microcontroller_start (struct sp8870_state* state) +{ + sp8870_writereg(state, 0x0F08, 0x000); + sp8870_writereg(state, 0x0F09, 0x000); + + // microcontroller START + sp8870_writereg(state, 0x0F00, 0x001); + // not documented but if we don't read 0x0D01 out here + // we don't get a correct data valid signal + sp8870_readreg(state, 0x0D01); +} + +static int sp8870_read_data_valid_signal(struct sp8870_state* state) +{ + return (sp8870_readreg(state, 0x0D02) > 0); +} + +static int configure_reg0xc05 (struct dtv_frontend_properties *p, u16 *reg0xc05) +{ + int known_parameters = 1; + + *reg0xc05 = 0x000; + + switch (p->modulation) { + case QPSK: + break; + case QAM_16: + *reg0xc05 |= (1 << 10); + break; + case QAM_64: + *reg0xc05 |= (2 << 10); + break; + case QAM_AUTO: + known_parameters = 0; + break; + default: + return -EINVAL; + }; + + switch (p->hierarchy) { + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + *reg0xc05 |= (1 << 7); + break; + case HIERARCHY_2: + *reg0xc05 |= (2 << 7); + break; + case HIERARCHY_4: + *reg0xc05 |= (3 << 7); + break; + case HIERARCHY_AUTO: + known_parameters = 0; + break; + default: + return -EINVAL; + }; + + switch (p->code_rate_HP) { + case FEC_1_2: + break; + case FEC_2_3: + *reg0xc05 |= (1 << 3); + break; + case FEC_3_4: + *reg0xc05 |= (2 << 3); + break; + case FEC_5_6: + *reg0xc05 |= (3 << 3); + break; + case FEC_7_8: + *reg0xc05 |= (4 << 3); + break; + case FEC_AUTO: + known_parameters = 0; + break; + default: + return -EINVAL; + }; + + if (known_parameters) + *reg0xc05 |= (2 << 1); /* use specified parameters */ + else + *reg0xc05 |= (1 << 1); /* enable autoprobing */ + + return 0; +} + +static int sp8870_wake_up(struct sp8870_state* state) +{ + // enable TS output and interface pins + return sp8870_writereg(state, 0xC18, 0x00D); +} + +static int sp8870_set_frontend_parameters(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct sp8870_state* state = fe->demodulator_priv; + int err; + u16 reg0xc05; + + if ((err = configure_reg0xc05(p, ®0xc05))) + return err; + + // system controller stop + sp8870_microcontroller_stop(state); + + // set tuner parameters + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + // sample rate correction bit [23..17] + sp8870_writereg(state, 0x0319, 0x000A); + + // sample rate correction bit [16..0] + sp8870_writereg(state, 0x031A, 0x0AAB); + + // integer carrier offset + sp8870_writereg(state, 0x0309, 0x0400); + + // fractional carrier offset + sp8870_writereg(state, 0x030A, 0x0000); + + // filter for 6/7/8 Mhz channel + if (p->bandwidth_hz == 6000000) + sp8870_writereg(state, 0x0311, 0x0002); + else if (p->bandwidth_hz == 7000000) + sp8870_writereg(state, 0x0311, 0x0001); + else + sp8870_writereg(state, 0x0311, 0x0000); + + // scan order: 2k first = 0x0000, 8k first = 0x0001 + if (p->transmission_mode == TRANSMISSION_MODE_2K) + sp8870_writereg(state, 0x0338, 0x0000); + else + sp8870_writereg(state, 0x0338, 0x0001); + + sp8870_writereg(state, 0xc05, reg0xc05); + + // read status reg in order to clear pending irqs + sp8870_readreg(state, 0x200); + + // system controller start + sp8870_microcontroller_start(state); + + return 0; +} + +static int sp8870_init (struct dvb_frontend* fe) +{ + struct sp8870_state* state = fe->demodulator_priv; + const struct firmware *fw = NULL; + + sp8870_wake_up(state); + if (state->initialised) return 0; + state->initialised = 1; + + dprintk ("%s\n", __func__); + + + /* request the firmware, this will block until someone uploads it */ + printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE); + if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) { + printk("sp8870: no firmware upload (timeout or file not found?)\n"); + return -EIO; + } + + if (sp8870_firmware_upload(state, fw)) { + printk("sp8870: writing firmware to device failed\n"); + release_firmware(fw); + return -EIO; + } + release_firmware(fw); + printk("sp8870: firmware upload complete\n"); + + /* enable TS output and interface pins */ + sp8870_writereg(state, 0xc18, 0x00d); + + // system controller stop + sp8870_microcontroller_stop(state); + + // ADC mode + sp8870_writereg(state, 0x0301, 0x0003); + + // Reed Solomon parity bytes passed to output + sp8870_writereg(state, 0x0C13, 0x0001); + + // MPEG clock is suppressed if no valid data + sp8870_writereg(state, 0x0C14, 0x0001); + + /* bit 0x010: enable data valid signal */ + sp8870_writereg(state, 0x0D00, 0x010); + sp8870_writereg(state, 0x0D01, 0x000); + + return 0; +} + +static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status) +{ + struct sp8870_state* state = fe->demodulator_priv; + int status; + int signal; + + *fe_status = 0; + + status = sp8870_readreg (state, 0x0200); + if (status < 0) + return -EIO; + + signal = sp8870_readreg (state, 0x0303); + if (signal < 0) + return -EIO; + + if (signal > 0x0F) + *fe_status |= FE_HAS_SIGNAL; + if (status & 0x08) + *fe_status |= FE_HAS_SYNC; + if (status & 0x04) + *fe_status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_VITERBI; + + return 0; +} + +static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber) +{ + struct sp8870_state* state = fe->demodulator_priv; + int ret; + u32 tmp; + + *ber = 0; + + ret = sp8870_readreg(state, 0xC08); + if (ret < 0) + return -EIO; + + tmp = ret & 0x3F; + + ret = sp8870_readreg(state, 0xC07); + if (ret < 0) + return -EIO; + + tmp = ret << 6; + + if (tmp >= 0x3FFF0) + tmp = ~0; + + *ber = tmp; + + return 0; +} + +static int sp8870_read_signal_strength(struct dvb_frontend* fe, u16 * signal) +{ + struct sp8870_state* state = fe->demodulator_priv; + int ret; + u16 tmp; + + *signal = 0; + + ret = sp8870_readreg (state, 0x306); + if (ret < 0) + return -EIO; + + tmp = ret << 8; + + ret = sp8870_readreg (state, 0x303); + if (ret < 0) + return -EIO; + + tmp |= ret; + + if (tmp) + *signal = 0xFFFF - tmp; + + return 0; +} + +static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks) +{ + struct sp8870_state* state = fe->demodulator_priv; + int ret; + + *ublocks = 0; + + ret = sp8870_readreg(state, 0xC0C); + if (ret < 0) + return -EIO; + + if (ret == 0xFFFF) + ret = ~0; + + *ublocks = ret; + + return 0; +} + +/* number of trials to recover from lockup */ +#define MAXTRIALS 5 +/* maximum checks for data valid signal */ +#define MAXCHECKS 100 + +/* only for debugging: counter for detected lockups */ +static int lockups; +/* only for debugging: counter for channel switches */ +static int switches; + +static int sp8870_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct sp8870_state* state = fe->demodulator_priv; + + /* + The firmware of the sp8870 sometimes locks up after setting frontend parameters. + We try to detect this by checking the data valid signal. + If it is not set after MAXCHECKS we try to recover the lockup by setting + the frontend parameters again. + */ + + int err = 0; + int valid = 0; + int trials = 0; + int check_count = 0; + + dprintk("%s: frequency = %i\n", __func__, p->frequency); + + for (trials = 1; trials <= MAXTRIALS; trials++) { + + err = sp8870_set_frontend_parameters(fe); + if (err) + return err; + + for (check_count = 0; check_count < MAXCHECKS; check_count++) { +// valid = ((sp8870_readreg(i2c, 0x0200) & 4) == 0); + valid = sp8870_read_data_valid_signal(state); + if (valid) { + dprintk("%s: delay = %i usec\n", + __func__, check_count * 10); + break; + } + udelay(10); + } + if (valid) + break; + } + + if (!valid) { + printk("%s: firmware crash!!!!!!\n", __func__); + return -EIO; + } + + if (debug) { + if (valid) { + if (trials > 1) { + printk("%s: firmware lockup!!!\n", __func__); + printk("%s: recovered after %i trial(s))\n", __func__, trials - 1); + lockups++; + } + } + switches++; + printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups); + } + + return 0; +} + +static int sp8870_sleep(struct dvb_frontend* fe) +{ + struct sp8870_state* state = fe->demodulator_priv; + + // tristate TS output and disable interface pins + return sp8870_writereg(state, 0xC18, 0x000); +} + +static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + fesettings->min_delay_ms = 350; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static int sp8870_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct sp8870_state* state = fe->demodulator_priv; + + if (enable) { + return sp8870_writereg(state, 0x206, 0x001); + } else { + return sp8870_writereg(state, 0x206, 0x000); + } +} + +static void sp8870_release(struct dvb_frontend* fe) +{ + struct sp8870_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops sp8870_ops; + +struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, + struct i2c_adapter* i2c) +{ + struct sp8870_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + + /* check if the demod is there */ + if (sp8870_readreg(state, 0x0200) < 0) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &sp8870_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops sp8870_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Spase SP8870 DVB-T", + .frequency_min = 470000000, + .frequency_max = 860000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | + FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER + }, + + .release = sp8870_release, + + .init = sp8870_init, + .sleep = sp8870_sleep, + .i2c_gate_ctrl = sp8870_i2c_gate_ctrl, + + .set_frontend = sp8870_set_frontend, + .get_tune_settings = sp8870_get_tune_settings, + + .read_status = sp8870_read_status, + .read_ber = sp8870_read_ber, + .read_signal_strength = sp8870_read_signal_strength, + .read_ucblocks = sp8870_read_uncorrected_blocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Spase SP8870 DVB-T Demodulator driver"); +MODULE_AUTHOR("Juergen Peitz"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(sp8870_attach); |