diff options
Diffstat (limited to 'drivers/media/dvb-frontends')
66 files changed, 2557 insertions, 938 deletions
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 5efec73a32d..6f809a70c78 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -207,6 +207,13 @@ config DVB_SI21XX help A DVB-S tuner module. Say Y when you want to support this frontend. +config DVB_TS2020 + tristate "Montage Tehnology TS2020 based tuners" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S/S2 silicon tuner. Say Y when you want to support this tuner. + config DVB_DS3000 tristate "Montage Tehnology DS3000 based" depends on DVB_CORE && I2C diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile index 7eb73bbd2e2..cebc0faffab 100644 --- a/drivers/media/dvb-frontends/Makefile +++ b/drivers/media/dvb-frontends/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_DVB_ISL6423) += isl6423.o obj-$(CONFIG_DVB_EC100) += ec100.o obj-$(CONFIG_DVB_HD29L2) += hd29l2.o obj-$(CONFIG_DVB_DS3000) += ds3000.o +obj-$(CONFIG_DVB_TS2020) += ts2020.o obj-$(CONFIG_DVB_MB86A16) += mb86a16.o obj-$(CONFIG_DVB_MB86A20S) += mb86a20s.o obj-$(CONFIG_DVB_IX2505V) += ix2505v.o diff --git a/drivers/media/dvb-frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c index 464ad878490..c9cad989b8b 100644 --- a/drivers/media/dvb-frontends/af9033.c +++ b/drivers/media/dvb-frontends/af9033.c @@ -318,6 +318,10 @@ static int af9033_init(struct dvb_frontend *fe) len = ARRAY_SIZE(tuner_init_fc2580); init = tuner_init_fc2580; break; + case AF9033_TUNER_FC0012: + len = ARRAY_SIZE(tuner_init_fc0012); + init = tuner_init_fc0012; + break; default: dev_dbg(&state->i2c->dev, "%s: unsupported tuner ID=%d\n", __func__, state->cfg.tuner); @@ -331,6 +335,20 @@ static int af9033_init(struct dvb_frontend *fe) goto err; } + if (state->cfg.ts_mode == AF9033_TS_MODE_SERIAL) { + ret = af9033_wr_reg_mask(state, 0x00d91c, 0x01, 0x01); + if (ret < 0) + goto err; + + ret = af9033_wr_reg_mask(state, 0x00d917, 0x00, 0x01); + if (ret < 0) + goto err; + + ret = af9033_wr_reg_mask(state, 0x00d916, 0x00, 0x01); + if (ret < 0) + goto err; + } + state->bandwidth_hz = 0; /* force to program all parameters */ return 0; diff --git a/drivers/media/dvb-frontends/af9033.h b/drivers/media/dvb-frontends/af9033.h index bfa4313fde2..82bd8c1513b 100644 --- a/drivers/media/dvb-frontends/af9033.h +++ b/drivers/media/dvb-frontends/af9033.h @@ -40,6 +40,7 @@ struct af9033_config { */ #define AF9033_TUNER_TUA9001 0x27 /* Infineon TUA 9001 */ #define AF9033_TUNER_FC0011 0x28 /* Fitipower FC0011 */ +#define AF9033_TUNER_FC0012 0x2e /* Fitipower FC0012 */ #define AF9033_TUNER_MXL5007T 0xa0 /* MaxLinear MxL5007T */ #define AF9033_TUNER_TDA18218 0xa1 /* NXP TDA 18218HN */ #define AF9033_TUNER_FC2580 0x32 /* FCI FC2580 */ diff --git a/drivers/media/dvb-frontends/af9033_priv.h b/drivers/media/dvb-frontends/af9033_priv.h index 34dddcd7753..e9bd7826554 100644 --- a/drivers/media/dvb-frontends/af9033_priv.h +++ b/drivers/media/dvb-frontends/af9033_priv.h @@ -199,10 +199,9 @@ static const struct reg_val ofsm_init[] = { { 0x8000a6, 0x01 }, { 0x8000a9, 0x00 }, { 0x8000aa, 0x01 }, - { 0x8000ab, 0x01 }, { 0x8000b0, 0x01 }, - { 0x8000c0, 0x05 }, - { 0x8000c4, 0x19 }, + { 0x8000c4, 0x05 }, + { 0x8000c8, 0x19 }, { 0x80f000, 0x0f }, { 0x80f016, 0x10 }, { 0x80f017, 0x04 }, @@ -322,8 +321,9 @@ static const struct reg_val tuner_init_tua9001[] = { { 0x80009b, 0x05 }, { 0x80009c, 0x80 }, { 0x8000b3, 0x00 }, - { 0x8000c1, 0x01 }, - { 0x8000c2, 0x00 }, + { 0x8000c5, 0x01 }, + { 0x8000c6, 0x00 }, + { 0x8000c9, 0x5d }, { 0x80f007, 0x00 }, { 0x80f01f, 0x82 }, { 0x80f020, 0x00 }, @@ -339,14 +339,14 @@ static const struct reg_val tuner_init_tua9001[] = { /* Fitipower fc0011 tuner init AF9033_TUNER_FC0011 = 0x28 */ static const struct reg_val tuner_init_fc0011[] = { - { 0x800046, AF9033_TUNER_FC0011 }, + { 0x800046, 0x28 }, { 0x800057, 0x00 }, { 0x800058, 0x01 }, { 0x80005f, 0x00 }, { 0x800060, 0x00 }, { 0x800068, 0xa5 }, { 0x80006e, 0x01 }, - { 0x800071, 0x0A }, + { 0x800071, 0x0a }, { 0x800072, 0x02 }, { 0x800074, 0x01 }, { 0x800079, 0x01 }, @@ -354,7 +354,7 @@ static const struct reg_val tuner_init_fc0011[] = { { 0x800094, 0x00 }, { 0x800095, 0x00 }, { 0x800096, 0x00 }, - { 0x80009b, 0x2D }, + { 0x80009b, 0x2d }, { 0x80009c, 0x60 }, { 0x80009d, 0x23 }, { 0x8000a4, 0x50 }, @@ -362,39 +362,82 @@ static const struct reg_val tuner_init_fc0011[] = { { 0x8000b3, 0x01 }, { 0x8000b7, 0x88 }, { 0x8000b8, 0xa6 }, - { 0x8000c3, 0x01 }, - { 0x8000c4, 0x01 }, - { 0x8000c7, 0x69 }, - { 0x80F007, 0x00 }, - { 0x80F00A, 0x1B }, - { 0x80F00B, 0x1B }, - { 0x80F00C, 0x1B }, - { 0x80F00D, 0x1B }, - { 0x80F00E, 0xFF }, - { 0x80F00F, 0x01 }, - { 0x80F010, 0x00 }, - { 0x80F011, 0x02 }, - { 0x80F012, 0xFF }, - { 0x80F013, 0x01 }, - { 0x80F014, 0x00 }, - { 0x80F015, 0x02 }, - { 0x80F01B, 0xEF }, - { 0x80F01C, 0x01 }, - { 0x80F01D, 0x0f }, - { 0x80F01E, 0x02 }, - { 0x80F01F, 0x6E }, - { 0x80F020, 0x00 }, - { 0x80F025, 0xDE }, - { 0x80F026, 0x00 }, - { 0x80F027, 0x0A }, - { 0x80F028, 0x03 }, - { 0x80F029, 0x6E }, - { 0x80F02A, 0x00 }, - { 0x80F047, 0x00 }, - { 0x80F054, 0x00 }, - { 0x80F055, 0x00 }, - { 0x80F077, 0x01 }, - { 0x80F1E6, 0x00 }, + { 0x8000c5, 0x01 }, + { 0x8000c6, 0x01 }, + { 0x8000c9, 0x69 }, + { 0x80f007, 0x00 }, + { 0x80f00a, 0x1b }, + { 0x80f00b, 0x1b }, + { 0x80f00c, 0x1b }, + { 0x80f00d, 0x1b }, + { 0x80f00e, 0xff }, + { 0x80f00f, 0x01 }, + { 0x80f010, 0x00 }, + { 0x80f011, 0x02 }, + { 0x80f012, 0xff }, + { 0x80f013, 0x01 }, + { 0x80f014, 0x00 }, + { 0x80f015, 0x02 }, + { 0x80f01b, 0xef }, + { 0x80f01c, 0x01 }, + { 0x80f01d, 0x0f }, + { 0x80f01e, 0x02 }, + { 0x80f01f, 0x6e }, + { 0x80f020, 0x00 }, + { 0x80f025, 0xde }, + { 0x80f026, 0x00 }, + { 0x80f027, 0x0a }, + { 0x80f028, 0x03 }, + { 0x80f029, 0x6e }, + { 0x80f02a, 0x00 }, + { 0x80f047, 0x00 }, + { 0x80f054, 0x00 }, + { 0x80f055, 0x00 }, + { 0x80f077, 0x01 }, + { 0x80f1e6, 0x00 }, +}; + +/* Fitipower FC0012 tuner init + AF9033_TUNER_FC0012 = 0x2e */ +static const struct reg_val tuner_init_fc0012[] = { + { 0x800046, 0x2e }, + { 0x800057, 0x00 }, + { 0x800058, 0x01 }, + { 0x800059, 0x01 }, + { 0x80005f, 0x00 }, + { 0x800060, 0x00 }, + { 0x80006d, 0x00 }, + { 0x800071, 0x05 }, + { 0x800072, 0x02 }, + { 0x800074, 0x01 }, + { 0x800075, 0x03 }, + { 0x800076, 0x02 }, + { 0x800077, 0x01 }, + { 0x800078, 0x00 }, + { 0x800079, 0x00 }, + { 0x80007a, 0x90 }, + { 0x80007b, 0x90 }, + { 0x800093, 0x00 }, + { 0x800094, 0x01 }, + { 0x800095, 0x02 }, + { 0x800096, 0x01 }, + { 0x800098, 0x0a }, + { 0x80009b, 0x05 }, + { 0x80009c, 0x80 }, + { 0x8000b3, 0x00 }, + { 0x8000c5, 0x01 }, + { 0x8000c6, 0x00 }, + { 0x8000c9, 0x5d }, + { 0x80f007, 0x00 }, + { 0x80f01f, 0xa0 }, + { 0x80f020, 0x00 }, + { 0x80f029, 0x82 }, + { 0x80f02a, 0x00 }, + { 0x80f047, 0x00 }, + { 0x80f054, 0x00 }, + { 0x80f055, 0x00 }, + { 0x80f077, 0x01 }, + { 0x80f1e6, 0x00 }, }; /* MaxLinear MxL5007T tuner init @@ -482,11 +525,12 @@ static const struct reg_val tuner_init_fc2580[] = { { 0x800095, 0x00 }, { 0x800096, 0x05 }, { 0x8000b3, 0x01 }, - { 0x8000c3, 0x01 }, - { 0x8000c4, 0x00 }, + { 0x8000c5, 0x01 }, + { 0x8000c6, 0x00 }, + { 0x8000d1, 0x01 }, { 0x80f007, 0x00 }, { 0x80f00c, 0x19 }, - { 0x80f00d, 0x1A }, + { 0x80f00d, 0x1a }, { 0x80f00e, 0x00 }, { 0x80f00f, 0x02 }, { 0x80f010, 0x00 }, diff --git a/drivers/media/dvb-frontends/bcm3510.h b/drivers/media/dvb-frontends/bcm3510.h index f4575c0cc44..5bd56b1623b 100644 --- a/drivers/media/dvb-frontends/bcm3510.h +++ b/drivers/media/dvb-frontends/bcm3510.h @@ -34,7 +34,7 @@ struct bcm3510_config int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); }; -#if defined(CONFIG_DVB_BCM3510) || (defined(CONFIG_DVB_BCM3510_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_BCM3510) extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/cx22700.h b/drivers/media/dvb-frontends/cx22700.h index 4757a930ca0..382a7b1f361 100644 --- a/drivers/media/dvb-frontends/cx22700.h +++ b/drivers/media/dvb-frontends/cx22700.h @@ -31,7 +31,7 @@ struct cx22700_config u8 demod_address; }; -#if defined(CONFIG_DVB_CX22700) || (defined(CONFIG_DVB_CX22700_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_CX22700) extern struct dvb_frontend* cx22700_attach(const struct cx22700_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/cx24110.h b/drivers/media/dvb-frontends/cx24110.h index fdcceee91f3..527aff1f272 100644 --- a/drivers/media/dvb-frontends/cx24110.h +++ b/drivers/media/dvb-frontends/cx24110.h @@ -46,7 +46,7 @@ static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) return 0; } -#if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_CX24110) extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/cx24116.c b/drivers/media/dvb-frontends/cx24116.c index b4887918653..2916d7c74a1 100644 --- a/drivers/media/dvb-frontends/cx24116.c +++ b/drivers/media/dvb-frontends/cx24116.c @@ -819,7 +819,7 @@ static int cx24116_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) static void cx24116_clone_params(struct dvb_frontend *fe) { struct cx24116_state *state = fe->demodulator_priv; - memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur)); + state->dcur = state->dnxt; } /* Wait for LNB */ diff --git a/drivers/media/dvb-frontends/dib0070.h b/drivers/media/dvb-frontends/dib0070.h index 45c31fae396..0c6befcc914 100644 --- a/drivers/media/dvb-frontends/dib0070.h +++ b/drivers/media/dvb-frontends/dib0070.h @@ -48,7 +48,7 @@ struct dib0070_config { u8 vga_filter; }; -#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TUNER_DIB0070) extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); extern u16 dib0070_wbd_offset(struct dvb_frontend *); extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); diff --git a/drivers/media/dvb-frontends/dib0090.h b/drivers/media/dvb-frontends/dib0090.h index 781dc49de45..6a090954fa1 100644 --- a/drivers/media/dvb-frontends/dib0090.h +++ b/drivers/media/dvb-frontends/dib0090.h @@ -75,7 +75,7 @@ struct dib0090_config { u8 force_crystal_mode; }; -#if defined(CONFIG_DVB_TUNER_DIB0090) || (defined(CONFIG_DVB_TUNER_DIB0090_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TUNER_DIB0090) extern struct dvb_frontend *dib0090_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config); extern struct dvb_frontend *dib0090_fw_register(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct dib0090_config *config); extern void dib0090_dcc_freq(struct dvb_frontend *fe, u8 fast); diff --git a/drivers/media/dvb-frontends/dib3000.h b/drivers/media/dvb-frontends/dib3000.h index 404f63a6f26..9b6c3bbc983 100644 --- a/drivers/media/dvb-frontends/dib3000.h +++ b/drivers/media/dvb-frontends/dib3000.h @@ -41,7 +41,7 @@ struct dib_fe_xfer_ops int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl); }; -#if defined(CONFIG_DVB_DIB3000MB) || (defined(CONFIG_DVB_DIB3000MB_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_DIB3000MB) extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config, struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops); #else diff --git a/drivers/media/dvb-frontends/dib8000.h b/drivers/media/dvb-frontends/dib8000.h index 39591bb172c..9e7a2b170d5 100644 --- a/drivers/media/dvb-frontends/dib8000.h +++ b/drivers/media/dvb-frontends/dib8000.h @@ -37,7 +37,7 @@ struct dib8000_config { #define DEFAULT_DIB8000_I2C_ADDRESS 18 -#if defined(CONFIG_DVB_DIB8000) || (defined(CONFIG_DVB_DIB8000_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_DIB8000) extern struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg); extern struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); diff --git a/drivers/media/dvb-frontends/dib9000.h b/drivers/media/dvb-frontends/dib9000.h index de1cc91fd83..f3639f045ff 100644 --- a/drivers/media/dvb-frontends/dib9000.h +++ b/drivers/media/dvb-frontends/dib9000.h @@ -27,7 +27,7 @@ struct dib9000_config { #define DEFAULT_DIB9000_I2C_ADDRESS 18 -#if defined(CONFIG_DVB_DIB9000) || (defined(CONFIG_DVB_DIB9000_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_DIB9000) extern struct dvb_frontend *dib9000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, const struct dib9000_config *cfg); extern int dib9000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr); extern struct i2c_adapter *dib9000_get_tuner_interface(struct dvb_frontend *fe); diff --git a/drivers/media/dvb-frontends/drxd_hard.c b/drivers/media/dvb-frontends/drxd_hard.c index e71cc60851e..9a2134792cf 100644 --- a/drivers/media/dvb-frontends/drxd_hard.c +++ b/drivers/media/dvb-frontends/drxd_hard.c @@ -2965,7 +2965,7 @@ struct dvb_frontend *drxd_attach(const struct drxd_config *config, return NULL; memset(state, 0, sizeof(*state)); - memcpy(&state->ops, &drxd_ops, sizeof(struct dvb_frontend_ops)); + state->ops = drxd_ops; state->dev = dev; state->config = *config; state->i2c = i2c; @@ -2976,10 +2976,13 @@ struct dvb_frontend *drxd_attach(const struct drxd_config *config, if (Read16(state, 0, 0, 0) < 0) goto error; - memcpy(&state->frontend.ops, &drxd_ops, - sizeof(struct dvb_frontend_ops)); + state->frontend.ops = drxd_ops; state->frontend.demodulator_priv = state; ConfigureMPEGOutput(state, 0); + /* add few initialization to allow gate control */ + CDRXD(state, state->config.IF ? state->config.IF : 36000000); + InitHI(state); + return &state->frontend; error: diff --git a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c index 60a529e3833..1e344b03327 100644 --- a/drivers/media/dvb-frontends/ds3000.c +++ b/drivers/media/dvb-frontends/ds3000.c @@ -1,8 +1,8 @@ /* - Montage Technology DS3000/TS2020 - DVBS/S2 Demodulator/Tuner driver - Copyright (C) 2009 Konstantin Dimitrov <kosio.dimitrov@gmail.com> + Montage Technology DS3000 - DVBS/S2 Demodulator driver + Copyright (C) 2009-2012 Konstantin Dimitrov <kosio.dimitrov@gmail.com> - Copyright (C) 2009 TurboSight.com + Copyright (C) 2009-2012 TurboSight.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -27,6 +27,7 @@ #include <linux/firmware.h> #include "dvb_frontend.h" +#include "ts2020.h" #include "ds3000.h" static int debug; @@ -42,7 +43,6 @@ static int debug; #define DS3000_DEFAULT_FIRMWARE "dvb-fe-ds3000.fw" #define DS3000_SAMPLE_RATE 96000 /* in kHz */ -#define DS3000_XTAL_FREQ 27000 /* in kHz */ /* Register values to initialise the demod in DVB-S mode */ static u8 ds3000_dvbs_init_tab[] = { @@ -256,22 +256,14 @@ static int ds3000_writereg(struct ds3000_state *state, int reg, int data) return 0; } -static int ds3000_tuner_writereg(struct ds3000_state *state, int reg, int data) +static int ds3000_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { - u8 buf[] = { reg, data }; - struct i2c_msg msg = { .addr = 0x60, - .flags = 0, .buf = buf, .len = 2 }; - int err; - - dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data); + struct ds3000_state *state = fe->demodulator_priv; - ds3000_writereg(state, 0x03, 0x11); - err = i2c_transfer(state->i2c, &msg, 1); - if (err != 1) { - printk("%s: writereg error(err == %i, reg == 0x%02x," - " value == 0x%02x)\n", __func__, err, reg, data); - return -EREMOTEIO; - } + if (enable) + ds3000_writereg(state, 0x03, 0x12); + else + ds3000_writereg(state, 0x03, 0x02); return 0; } @@ -280,15 +272,14 @@ static int ds3000_tuner_writereg(struct ds3000_state *state, int reg, int data) static int ds3000_writeFW(struct ds3000_state *state, int reg, const u8 *data, u16 len) { - int i, ret = -EREMOTEIO; + int i, ret = 0; struct i2c_msg msg; u8 *buf; buf = kmalloc(33, GFP_KERNEL); if (buf == NULL) { printk(KERN_ERR "Unable to kmalloc\n"); - ret = -ENOMEM; - goto error; + return -ENOMEM; } *(buf) = reg; @@ -308,8 +299,10 @@ static int ds3000_writeFW(struct ds3000_state *state, int reg, printk(KERN_ERR "%s: write error(err == %i, " "reg == 0x%02x\n", __func__, ret, reg); ret = -EREMOTEIO; + goto error; } } + ret = 0; error: kfree(buf); @@ -348,38 +341,6 @@ static int ds3000_readreg(struct ds3000_state *state, u8 reg) return b1[0]; } -static int ds3000_tuner_readreg(struct ds3000_state *state, u8 reg) -{ - int ret; - u8 b0[] = { reg }; - u8 b1[] = { 0 }; - struct i2c_msg msg[] = { - { - .addr = 0x60, - .flags = 0, - .buf = b0, - .len = 1 - }, { - .addr = 0x60, - .flags = I2C_M_RD, - .buf = b1, - .len = 1 - } - }; - - ds3000_writereg(state, 0x03, 0x12); - ret = i2c_transfer(state->i2c, msg, 2); - - if (ret != 2) { - printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret); - return ret; - } - - dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]); - - return b1[0]; -} - static int ds3000_load_firmware(struct dvb_frontend *fe, const struct firmware *fw); @@ -424,6 +385,7 @@ static int ds3000_load_firmware(struct dvb_frontend *fe, const struct firmware *fw) { struct ds3000_state *state = fe->demodulator_priv; + int ret = 0; dprintk("%s\n", __func__); dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n", @@ -436,10 +398,10 @@ static int ds3000_load_firmware(struct dvb_frontend *fe, /* Begin the firmware load process */ ds3000_writereg(state, 0xb2, 0x01); /* write the entire firmware */ - ds3000_writeFW(state, 0xb0, fw->data, fw->size); + ret = ds3000_writeFW(state, 0xb0, fw->data, fw->size); ds3000_writereg(state, 0xb2, 0x00); - return 0; + return ret; } static int ds3000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) @@ -498,6 +460,9 @@ static int ds3000_read_status(struct dvb_frontend *fe, fe_status_t* status) return 1; } + if (state->config->set_lock_led) + state->config->set_lock_led(fe, *status == 0 ? 0 : 1); + dprintk("%s: status = 0x%02x\n", __func__, lock); return 0; @@ -568,33 +533,11 @@ static int ds3000_read_ber(struct dvb_frontend *fe, u32* ber) return 0; } -/* read TS2020 signal strength */ static int ds3000_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) { - struct ds3000_state *state = fe->demodulator_priv; - u16 sig_reading, sig_strength; - u8 rfgain, bbgain; - - dprintk("%s()\n", __func__); - - rfgain = ds3000_tuner_readreg(state, 0x3d) & 0x1f; - bbgain = ds3000_tuner_readreg(state, 0x21) & 0x1f; - - if (rfgain > 15) - rfgain = 15; - if (bbgain > 13) - bbgain = 13; - - sig_reading = rfgain * 2 + bbgain * 3; - - sig_strength = 40 + (64 - sig_reading) * 50 / 64 ; - - /* cook the value to be suitable for szap-s2 human readable output */ - *signal_strength = sig_strength * 1000; - - dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", __func__, - sig_reading, *signal_strength); + if (fe->ops.tuner_ops.get_rf_strength) + fe->ops.tuner_ops.get_rf_strength(fe, signal_strength); return 0; } @@ -878,6 +821,10 @@ static int ds3000_diseqc_send_burst(struct dvb_frontend *fe, static void ds3000_release(struct dvb_frontend *fe) { struct ds3000_state *state = fe->demodulator_priv; + + if (state->config->set_lock_led) + state->config->set_lock_led(fe, 0); + dprintk("%s\n", __func__); kfree(state); } @@ -952,133 +899,17 @@ static int ds3000_set_frontend(struct dvb_frontend *fe) int i; fe_status_t status; - u8 mlpf, mlpf_new, mlpf_max, mlpf_min, nlpf, div4; s32 offset_khz; - u16 value, ndiv; - u32 f3db; + u32 frequency; + u16 value; dprintk("%s() ", __func__); if (state->config->set_ts_params) state->config->set_ts_params(fe, 0); /* Tune */ - /* unknown */ - ds3000_tuner_writereg(state, 0x07, 0x02); - ds3000_tuner_writereg(state, 0x10, 0x00); - ds3000_tuner_writereg(state, 0x60, 0x79); - ds3000_tuner_writereg(state, 0x08, 0x01); - ds3000_tuner_writereg(state, 0x00, 0x01); - div4 = 0; - - /* calculate and set freq divider */ - if (c->frequency < 1146000) { - ds3000_tuner_writereg(state, 0x10, 0x11); - div4 = 1; - ndiv = ((c->frequency * (6 + 8) * 4) + - (DS3000_XTAL_FREQ / 2)) / - DS3000_XTAL_FREQ - 1024; - } else { - ds3000_tuner_writereg(state, 0x10, 0x01); - ndiv = ((c->frequency * (6 + 8) * 2) + - (DS3000_XTAL_FREQ / 2)) / - DS3000_XTAL_FREQ - 1024; - } - - ds3000_tuner_writereg(state, 0x01, (ndiv & 0x0f00) >> 8); - ds3000_tuner_writereg(state, 0x02, ndiv & 0x00ff); - - /* set pll */ - ds3000_tuner_writereg(state, 0x03, 0x06); - ds3000_tuner_writereg(state, 0x51, 0x0f); - ds3000_tuner_writereg(state, 0x51, 0x1f); - ds3000_tuner_writereg(state, 0x50, 0x10); - ds3000_tuner_writereg(state, 0x50, 0x00); - msleep(5); - - /* unknown */ - ds3000_tuner_writereg(state, 0x51, 0x17); - ds3000_tuner_writereg(state, 0x51, 0x1f); - ds3000_tuner_writereg(state, 0x50, 0x08); - ds3000_tuner_writereg(state, 0x50, 0x00); - msleep(5); - - value = ds3000_tuner_readreg(state, 0x3d); - value &= 0x0f; - if ((value > 4) && (value < 15)) { - value -= 3; - if (value < 4) - value = 4; - value = ((value << 3) | 0x01) & 0x79; - } - - ds3000_tuner_writereg(state, 0x60, value); - ds3000_tuner_writereg(state, 0x51, 0x17); - ds3000_tuner_writereg(state, 0x51, 0x1f); - ds3000_tuner_writereg(state, 0x50, 0x08); - ds3000_tuner_writereg(state, 0x50, 0x00); - - /* set low-pass filter period */ - ds3000_tuner_writereg(state, 0x04, 0x2e); - ds3000_tuner_writereg(state, 0x51, 0x1b); - ds3000_tuner_writereg(state, 0x51, 0x1f); - ds3000_tuner_writereg(state, 0x50, 0x04); - ds3000_tuner_writereg(state, 0x50, 0x00); - msleep(5); - - f3db = ((c->symbol_rate / 1000) << 2) / 5 + 2000; - if ((c->symbol_rate / 1000) < 5000) - f3db += 3000; - if (f3db < 7000) - f3db = 7000; - if (f3db > 40000) - f3db = 40000; - - /* set low-pass filter baseband */ - value = ds3000_tuner_readreg(state, 0x26); - mlpf = 0x2e * 207 / ((value << 1) + 151); - mlpf_max = mlpf * 135 / 100; - mlpf_min = mlpf * 78 / 100; - if (mlpf_max > 63) - mlpf_max = 63; - - /* rounded to the closest integer */ - nlpf = ((mlpf * f3db * 1000) + (2766 * DS3000_XTAL_FREQ / 2)) - / (2766 * DS3000_XTAL_FREQ); - if (nlpf > 23) - nlpf = 23; - if (nlpf < 1) - nlpf = 1; - - /* rounded to the closest integer */ - mlpf_new = ((DS3000_XTAL_FREQ * nlpf * 2766) + - (1000 * f3db / 2)) / (1000 * f3db); - - if (mlpf_new < mlpf_min) { - nlpf++; - mlpf_new = ((DS3000_XTAL_FREQ * nlpf * 2766) + - (1000 * f3db / 2)) / (1000 * f3db); - } - - if (mlpf_new > mlpf_max) - mlpf_new = mlpf_max; - - ds3000_tuner_writereg(state, 0x04, mlpf_new); - ds3000_tuner_writereg(state, 0x06, nlpf); - ds3000_tuner_writereg(state, 0x51, 0x1b); - ds3000_tuner_writereg(state, 0x51, 0x1f); - ds3000_tuner_writereg(state, 0x50, 0x04); - ds3000_tuner_writereg(state, 0x50, 0x00); - msleep(5); - - /* unknown */ - ds3000_tuner_writereg(state, 0x51, 0x1e); - ds3000_tuner_writereg(state, 0x51, 0x1f); - ds3000_tuner_writereg(state, 0x50, 0x01); - ds3000_tuner_writereg(state, 0x50, 0x00); - msleep(60); - - offset_khz = (ndiv - ndiv % 2 + 1024) * DS3000_XTAL_FREQ - / (6 + 8) / (div4 + 1) / 2 - c->frequency; + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); /* ds3000 global reset */ ds3000_writereg(state, 0x07, 0x80); @@ -1186,7 +1017,11 @@ static int ds3000_set_frontend(struct dvb_frontend *fe) /* start ds3000 build-in uC */ ds3000_writereg(state, 0xb2, 0x00); - ds3000_set_carrier_offset(fe, offset_khz); + if (fe->ops.tuner_ops.get_frequency) { + fe->ops.tuner_ops.get_frequency(fe, &frequency); + offset_khz = frequency - c->frequency; + ds3000_set_carrier_offset(fe, offset_khz); + } for (i = 0; i < 30 ; i++) { ds3000_read_status(fe, &status); @@ -1218,6 +1053,11 @@ static int ds3000_tune(struct dvb_frontend *fe, static enum dvbfe_algo ds3000_get_algo(struct dvb_frontend *fe) { + struct ds3000_state *state = fe->demodulator_priv; + + if (state->config->set_lock_led) + state->config->set_lock_led(fe, 0); + dprintk("%s()\n", __func__); return DVBFE_ALGO_HW; } @@ -1237,10 +1077,6 @@ static int ds3000_initfe(struct dvb_frontend *fe) ds3000_writereg(state, 0x08, 0x01 | ds3000_readreg(state, 0x08)); msleep(1); - /* TS2020 init */ - ds3000_tuner_writereg(state, 0x42, 0x73); - ds3000_tuner_writereg(state, 0x05, 0x01); - ds3000_tuner_writereg(state, 0x62, 0xf5); /* Load the firmware if required */ ret = ds3000_firmware_ondemand(fe); if (ret != 0) { @@ -1251,17 +1087,10 @@ static int ds3000_initfe(struct dvb_frontend *fe) return 0; } -/* Put device to sleep */ -static int ds3000_sleep(struct dvb_frontend *fe) -{ - dprintk("%s()\n", __func__); - return 0; -} - static struct dvb_frontend_ops ds3000_ops = { - .delsys = { SYS_DVBS, SYS_DVBS2}, + .delsys = { SYS_DVBS, SYS_DVBS2 }, .info = { - .name = "Montage Technology DS3000/TS2020", + .name = "Montage Technology DS3000", .frequency_min = 950000, .frequency_max = 2150000, .frequency_stepsize = 1011, /* kHz for QPSK frontends */ @@ -1279,7 +1108,7 @@ static struct dvb_frontend_ops ds3000_ops = { .release = ds3000_release, .init = ds3000_initfe, - .sleep = ds3000_sleep, + .i2c_gate_ctrl = ds3000_i2c_gate_ctrl, .read_status = ds3000_read_status, .read_ber = ds3000_read_ber, .read_signal_strength = ds3000_read_signal_strength, @@ -1299,7 +1128,7 @@ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); MODULE_DESCRIPTION("DVB Frontend module for Montage Technology " - "DS3000/TS2020 hardware"); -MODULE_AUTHOR("Konstantin Dimitrov"); + "DS3000 hardware"); +MODULE_AUTHOR("Konstantin Dimitrov <kosio.dimitrov@gmail.com>"); MODULE_LICENSE("GPL"); MODULE_FIRMWARE(DS3000_DEFAULT_FIRMWARE); diff --git a/drivers/media/dvb-frontends/ds3000.h b/drivers/media/dvb-frontends/ds3000.h index 1b736888ea3..478ad66c63d 100644 --- a/drivers/media/dvb-frontends/ds3000.h +++ b/drivers/media/dvb-frontends/ds3000.h @@ -1,8 +1,8 @@ /* - Montage Technology DS3000/TS2020 - DVBS/S2 Satellite demod/tuner driver - Copyright (C) 2009 Konstantin Dimitrov <kosio.dimitrov@gmail.com> + Montage Technology DS3000 - DVBS/S2 Demodulator driver + Copyright (C) 2009-2012 Konstantin Dimitrov <kosio.dimitrov@gmail.com> - Copyright (C) 2009 TurboSight.com + Copyright (C) 2009-2012 TurboSight.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -17,7 +17,7 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ + */ #ifndef DS3000_H #define DS3000_H @@ -30,6 +30,8 @@ struct ds3000_config { u8 ci_mode; /* Set device param to start dma */ int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); + /* Hook for Lock LED */ + void (*set_lock_led)(struct dvb_frontend *fe, int offon); }; #if defined(CONFIG_DVB_DS3000) || \ diff --git a/drivers/media/dvb-frontends/dvb-pll.h b/drivers/media/dvb-frontends/dvb-pll.h index 4de754f76ce..f4b5a0601c3 100644 --- a/drivers/media/dvb-frontends/dvb-pll.h +++ b/drivers/media/dvb-frontends/dvb-pll.h @@ -38,7 +38,7 @@ * @param pll_desc_id dvb_pll_desc to use. * @return Frontend pointer on success, NULL on failure */ -#if defined(CONFIG_DVB_PLL) || (defined(CONFIG_DVB_PLL_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_PLL) extern struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, struct i2c_adapter *i2c, diff --git a/drivers/media/dvb-frontends/isl6405.h b/drivers/media/dvb-frontends/isl6405.h index 1c793d37576..8abb70c26fd 100644 --- a/drivers/media/dvb-frontends/isl6405.h +++ b/drivers/media/dvb-frontends/isl6405.h @@ -55,7 +55,7 @@ #define ISL6405_ENT2 0x20 #define ISL6405_ISEL2 0x40 -#if defined(CONFIG_DVB_ISL6405) || (defined(CONFIG_DVB_ISL6405_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_ISL6405) /* override_set and override_clear control which system register bits (above) * to always set & clear */ diff --git a/drivers/media/dvb-frontends/isl6421.h b/drivers/media/dvb-frontends/isl6421.h index 47e4518a042..e7ca7d12b50 100644 --- a/drivers/media/dvb-frontends/isl6421.h +++ b/drivers/media/dvb-frontends/isl6421.h @@ -39,7 +39,7 @@ #define ISL6421_ISEL1 0x20 #define ISL6421_DCL 0x40 -#if defined(CONFIG_DVB_ISL6421) || (defined(CONFIG_DVB_ISL6421_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_ISL6421) /* override_set and override_clear control which system register bits (above) to always set & clear */ extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, u8 override_set, u8 override_clear); diff --git a/drivers/media/dvb-frontends/isl6423.h b/drivers/media/dvb-frontends/isl6423.h index e1a37fba01c..80dfd9cc4f4 100644 --- a/drivers/media/dvb-frontends/isl6423.h +++ b/drivers/media/dvb-frontends/isl6423.h @@ -42,7 +42,7 @@ struct isl6423_config { u8 mod_extern; }; -#if defined(CONFIG_DVB_ISL6423) || (defined(CONFIG_DVB_ISL6423_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_ISL6423) extern struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe, diff --git a/drivers/media/dvb-frontends/itd1000.h b/drivers/media/dvb-frontends/itd1000.h index 5e18df071b8..edae0902f4f 100644 --- a/drivers/media/dvb-frontends/itd1000.h +++ b/drivers/media/dvb-frontends/itd1000.h @@ -29,7 +29,7 @@ struct itd1000_config { u8 i2c_address; }; -#if defined(CONFIG_DVB_TUNER_ITD1000) || (defined(CONFIG_DVB_TUNER_ITD1000_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TUNER_ITD1000) extern struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg); #else static inline struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct itd1000_config *cfg) diff --git a/drivers/media/dvb-frontends/ix2505v.c b/drivers/media/dvb-frontends/ix2505v.c index bc5a82082aa..0e3387e0095 100644 --- a/drivers/media/dvb-frontends/ix2505v.c +++ b/drivers/media/dvb-frontends/ix2505v.c @@ -212,7 +212,7 @@ static int ix2505v_set_params(struct dvb_frontend *fe) lpf = 0xb; deb_info("Osc=%x b_w=%x lpf=%x\n", local_osc, b_w, lpf); - deb_info("Data 0=[%x%x%x%x]\n", data[0], data[1], data[2], data[3]); + deb_info("Data 0=[%4phN]\n", data); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); diff --git a/drivers/media/dvb-frontends/l64781.h b/drivers/media/dvb-frontends/l64781.h index 1305a9e7fb0..6813b08a774 100644 --- a/drivers/media/dvb-frontends/l64781.h +++ b/drivers/media/dvb-frontends/l64781.h @@ -31,7 +31,7 @@ struct l64781_config u8 demod_address; }; -#if defined(CONFIG_DVB_L64781) || (defined(CONFIG_DVB_L64781_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_L64781) extern struct dvb_frontend* l64781_attach(const struct l64781_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/lgdt330x.h b/drivers/media/dvb-frontends/lgdt330x.h index 9012504f0f2..ca0eab562e1 100644 --- a/drivers/media/dvb-frontends/lgdt330x.h +++ b/drivers/media/dvb-frontends/lgdt330x.h @@ -52,7 +52,7 @@ struct lgdt330x_config int clock_polarity_flip; }; -#if defined(CONFIG_DVB_LGDT330X) || (defined(CONFIG_DVB_LGDT330X_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_LGDT330X) extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/m88rs2000.c b/drivers/media/dvb-frontends/m88rs2000.c index 633815ed90c..4da5272075c 100644 --- a/drivers/media/dvb-frontends/m88rs2000.c +++ b/drivers/media/dvb-frontends/m88rs2000.c @@ -60,15 +60,13 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); #define info(format, arg...) \ printk(KERN_INFO "m88rs2000-fe: " format "\n" , ## arg) -static int m88rs2000_writereg(struct m88rs2000_state *state, u8 tuner, +static int m88rs2000_writereg(struct m88rs2000_state *state, u8 reg, u8 data) { int ret; - u8 addr = (tuner == 0) ? state->config->tuner_addr : - state->config->demod_addr; u8 buf[] = { reg, data }; struct i2c_msg msg = { - .addr = addr, + .addr = state->config->demod_addr, .flags = 0, .buf = buf, .len = 2 @@ -83,44 +81,20 @@ static int m88rs2000_writereg(struct m88rs2000_state *state, u8 tuner, return (ret != 1) ? -EREMOTEIO : 0; } -static int m88rs2000_demod_write(struct m88rs2000_state *state, u8 reg, u8 data) -{ - return m88rs2000_writereg(state, 1, reg, data); -} - -static int m88rs2000_tuner_write(struct m88rs2000_state *state, u8 reg, u8 data) -{ - m88rs2000_demod_write(state, 0x81, 0x84); - udelay(10); - return m88rs2000_writereg(state, 0, reg, data); - -} - -static int m88rs2000_write(struct dvb_frontend *fe, const u8 buf[], int len) -{ - struct m88rs2000_state *state = fe->demodulator_priv; - - if (len != 2) - return -EINVAL; - - return m88rs2000_writereg(state, 1, buf[0], buf[1]); -} - -static u8 m88rs2000_readreg(struct m88rs2000_state *state, u8 tuner, u8 reg) +static u8 m88rs2000_readreg(struct m88rs2000_state *state, u8 reg) { int ret; u8 b0[] = { reg }; u8 b1[] = { 0 }; - u8 addr = (tuner == 0) ? state->config->tuner_addr : - state->config->demod_addr; + struct i2c_msg msg[] = { { - .addr = addr, + .addr = state->config->demod_addr, .flags = 0, .buf = b0, .len = 1 }, { - .addr = addr, + .addr = state->config->demod_addr, .flags = I2C_M_RD, .buf = b1, .len = 1 @@ -136,18 +110,6 @@ static u8 m88rs2000_readreg(struct m88rs2000_state *state, u8 tuner, u8 reg) return b1[0]; } -static u8 m88rs2000_demod_read(struct m88rs2000_state *state, u8 reg) -{ - return m88rs2000_readreg(state, 1, reg); -} - -static u8 m88rs2000_tuner_read(struct m88rs2000_state *state, u8 reg) -{ - m88rs2000_demod_write(state, 0x81, 0x85); - udelay(10); - return m88rs2000_readreg(state, 0, reg); -} - static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate) { struct m88rs2000_state *state = fe->demodulator_priv; @@ -166,9 +128,9 @@ static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate) b[0] = (u8) (temp >> 16) & 0xff; b[1] = (u8) (temp >> 8) & 0xff; b[2] = (u8) temp & 0xff; - ret = m88rs2000_demod_write(state, 0x93, b[2]); - ret |= m88rs2000_demod_write(state, 0x94, b[1]); - ret |= m88rs2000_demod_write(state, 0x95, b[0]); + ret = m88rs2000_writereg(state, 0x93, b[2]); + ret |= m88rs2000_writereg(state, 0x94, b[1]); + ret |= m88rs2000_writereg(state, 0x95, b[0]); deb_info("m88rs2000: m88rs2000_set_symbolrate\n"); return ret; @@ -182,37 +144,37 @@ static int m88rs2000_send_diseqc_msg(struct dvb_frontend *fe, int i; u8 reg; deb_info("%s\n", __func__); - m88rs2000_demod_write(state, 0x9a, 0x30); - reg = m88rs2000_demod_read(state, 0xb2); + m88rs2000_writereg(state, 0x9a, 0x30); + reg = m88rs2000_readreg(state, 0xb2); reg &= 0x3f; - m88rs2000_demod_write(state, 0xb2, reg); + m88rs2000_writereg(state, 0xb2, reg); for (i = 0; i < m->msg_len; i++) - m88rs2000_demod_write(state, 0xb3 + i, m->msg[i]); + m88rs2000_writereg(state, 0xb3 + i, m->msg[i]); - reg = m88rs2000_demod_read(state, 0xb1); + reg = m88rs2000_readreg(state, 0xb1); reg &= 0x87; reg |= ((m->msg_len - 1) << 3) | 0x07; reg &= 0x7f; - m88rs2000_demod_write(state, 0xb1, reg); + m88rs2000_writereg(state, 0xb1, reg); for (i = 0; i < 15; i++) { - if ((m88rs2000_demod_read(state, 0xb1) & 0x40) == 0x0) + if ((m88rs2000_readreg(state, 0xb1) & 0x40) == 0x0) break; msleep(20); } - reg = m88rs2000_demod_read(state, 0xb1); + reg = m88rs2000_readreg(state, 0xb1); if ((reg & 0x40) > 0x0) { reg &= 0x7f; reg |= 0x40; - m88rs2000_demod_write(state, 0xb1, reg); + m88rs2000_writereg(state, 0xb1, reg); } - reg = m88rs2000_demod_read(state, 0xb2); + reg = m88rs2000_readreg(state, 0xb2); reg &= 0x3f; reg |= 0x80; - m88rs2000_demod_write(state, 0xb2, reg); - m88rs2000_demod_write(state, 0x9a, 0xb0); + m88rs2000_writereg(state, 0xb2, reg); + m88rs2000_writereg(state, 0x9a, 0xb0); return 0; @@ -224,14 +186,14 @@ static int m88rs2000_send_diseqc_burst(struct dvb_frontend *fe, struct m88rs2000_state *state = fe->demodulator_priv; u8 reg0, reg1; deb_info("%s\n", __func__); - m88rs2000_demod_write(state, 0x9a, 0x30); + m88rs2000_writereg(state, 0x9a, 0x30); msleep(50); - reg0 = m88rs2000_demod_read(state, 0xb1); - reg1 = m88rs2000_demod_read(state, 0xb2); + reg0 = m88rs2000_readreg(state, 0xb1); + reg1 = m88rs2000_readreg(state, 0xb2); /* TODO complete this section */ - m88rs2000_demod_write(state, 0xb2, reg1); - m88rs2000_demod_write(state, 0xb1, reg0); - m88rs2000_demod_write(state, 0x9a, 0xb0); + m88rs2000_writereg(state, 0xb2, reg1); + m88rs2000_writereg(state, 0xb1, reg0); + m88rs2000_writereg(state, 0x9a, 0xb0); return 0; } @@ -240,9 +202,9 @@ static int m88rs2000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) { struct m88rs2000_state *state = fe->demodulator_priv; u8 reg0, reg1; - m88rs2000_demod_write(state, 0x9a, 0x30); - reg0 = m88rs2000_demod_read(state, 0xb1); - reg1 = m88rs2000_demod_read(state, 0xb2); + m88rs2000_writereg(state, 0x9a, 0x30); + reg0 = m88rs2000_readreg(state, 0xb1); + reg1 = m88rs2000_readreg(state, 0xb2); reg1 &= 0x3f; @@ -257,9 +219,9 @@ static int m88rs2000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) default: break; } - m88rs2000_demod_write(state, 0xb2, reg1); - m88rs2000_demod_write(state, 0xb1, reg0); - m88rs2000_demod_write(state, 0x9a, 0xb0); + m88rs2000_writereg(state, 0xb2, reg1); + m88rs2000_writereg(state, 0xb1, reg0); + m88rs2000_writereg(state, 0x9a, 0xb0); return 0; } @@ -276,14 +238,6 @@ struct inittab m88rs2000_setup[] = { {DEMOD_WRITE, 0x00, 0x00}, {DEMOD_WRITE, 0x9a, 0xb0}, {DEMOD_WRITE, 0x81, 0xc1}, - {TUNER_WRITE, 0x42, 0x73}, - {TUNER_WRITE, 0x05, 0x07}, - {TUNER_WRITE, 0x20, 0x27}, - {TUNER_WRITE, 0x07, 0x02}, - {TUNER_WRITE, 0x11, 0xff}, - {TUNER_WRITE, 0x60, 0xf9}, - {TUNER_WRITE, 0x08, 0x01}, - {TUNER_WRITE, 0x00, 0x41}, {DEMOD_WRITE, 0x81, 0x81}, {DEMOD_WRITE, 0x86, 0xc6}, {DEMOD_WRITE, 0x9a, 0x30}, @@ -301,23 +255,10 @@ struct inittab m88rs2000_shutdown[] = { {DEMOD_WRITE, 0xf1, 0x89}, {DEMOD_WRITE, 0x00, 0x01}, {DEMOD_WRITE, 0x9a, 0xb0}, - {TUNER_WRITE, 0x00, 0x40}, {DEMOD_WRITE, 0x81, 0x81}, {0xff, 0xaa, 0xff} }; -struct inittab tuner_reset[] = { - {TUNER_WRITE, 0x42, 0x73}, - {TUNER_WRITE, 0x05, 0x07}, - {TUNER_WRITE, 0x20, 0x27}, - {TUNER_WRITE, 0x07, 0x02}, - {TUNER_WRITE, 0x11, 0xff}, - {TUNER_WRITE, 0x60, 0xf9}, - {TUNER_WRITE, 0x08, 0x01}, - {TUNER_WRITE, 0x00, 0x41}, - {0xff, 0xaa, 0xff} -}; - struct inittab fe_reset[] = { {DEMOD_WRITE, 0x00, 0x01}, {DEMOD_WRITE, 0xf1, 0xbf}, @@ -389,11 +330,7 @@ static int m88rs2000_tab_set(struct m88rs2000_state *state, for (i = 0; i < 255; i++) { switch (tab[i].cmd) { case 0x01: - ret = m88rs2000_demod_write(state, tab[i].reg, - tab[i].val); - break; - case 0x02: - ret = m88rs2000_tuner_write(state, tab[i].reg, + ret = m88rs2000_writereg(state, tab[i].reg, tab[i].val); break; case 0x10: @@ -419,7 +356,7 @@ static int m88rs2000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) struct m88rs2000_state *state = fe->demodulator_priv; u8 data; - data = m88rs2000_demod_read(state, 0xb2); + data = m88rs2000_readreg(state, 0xb2); data |= 0x03; /* bit0 V/H, bit1 off/on */ switch (volt) { @@ -434,23 +371,11 @@ static int m88rs2000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) break; } - m88rs2000_demod_write(state, 0xb2, data); + m88rs2000_writereg(state, 0xb2, data); return 0; } -static int m88rs2000_startup(struct m88rs2000_state *state) -{ - int ret = 0; - u8 reg; - - reg = m88rs2000_tuner_read(state, 0x00); - if ((reg & 0x40) == 0) - ret = -ENODEV; - - return ret; -} - static int m88rs2000_init(struct dvb_frontend *fe) { struct m88rs2000_state *state = fe->demodulator_priv; @@ -458,7 +383,11 @@ static int m88rs2000_init(struct dvb_frontend *fe) deb_info("m88rs2000: init chip\n"); /* Setup frontend from shutdown/cold */ - ret = m88rs2000_tab_set(state, m88rs2000_setup); + if (state->config->inittab) + ret = m88rs2000_tab_set(state, + (struct inittab *)state->config->inittab); + else + ret = m88rs2000_tab_set(state, m88rs2000_setup); return ret; } @@ -475,7 +404,7 @@ static int m88rs2000_sleep(struct dvb_frontend *fe) static int m88rs2000_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct m88rs2000_state *state = fe->demodulator_priv; - u8 reg = m88rs2000_demod_read(state, 0x8c); + u8 reg = m88rs2000_readreg(state, 0x8c); *status = 0; @@ -488,183 +417,64 @@ static int m88rs2000_read_status(struct dvb_frontend *fe, fe_status_t *status) return 0; } -/* Extact code for these unknown but lmedm04 driver uses interupt callbacks */ - static int m88rs2000_read_ber(struct dvb_frontend *fe, u32 *ber) { - deb_info("m88rs2000_read_ber %d\n", *ber); - *ber = 0; + struct m88rs2000_state *state = fe->demodulator_priv; + u8 tmp0, tmp1; + + m88rs2000_writereg(state, 0x9a, 0x30); + tmp0 = m88rs2000_readreg(state, 0xd8); + if ((tmp0 & 0x10) != 0) { + m88rs2000_writereg(state, 0x9a, 0xb0); + *ber = 0xffffffff; + return 0; + } + + *ber = (m88rs2000_readreg(state, 0xd7) << 8) | + m88rs2000_readreg(state, 0xd6); + + tmp1 = m88rs2000_readreg(state, 0xd9); + m88rs2000_writereg(state, 0xd9, (tmp1 & ~7) | 4); + /* needs twice */ + m88rs2000_writereg(state, 0xd8, (tmp0 & ~8) | 0x30); + m88rs2000_writereg(state, 0xd8, (tmp0 & ~8) | 0x30); + m88rs2000_writereg(state, 0x9a, 0xb0); + return 0; } static int m88rs2000_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { - *strength = 0; - return 0; -} + if (fe->ops.tuner_ops.get_rf_strength) + fe->ops.tuner_ops.get_rf_strength(fe, strength); -static int m88rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) -{ - deb_info("m88rs2000_read_snr %d\n", *snr); - *snr = 0; return 0; } -static int m88rs2000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) -{ - deb_info("m88rs2000_read_ber %d\n", *ucblocks); - *ucblocks = 0; - return 0; -} - -static int m88rs2000_tuner_gate_ctrl(struct m88rs2000_state *state, u8 offset) -{ - int ret; - ret = m88rs2000_tuner_write(state, 0x51, 0x1f - offset); - ret |= m88rs2000_tuner_write(state, 0x51, 0x1f); - ret |= m88rs2000_tuner_write(state, 0x50, offset); - ret |= m88rs2000_tuner_write(state, 0x50, 0x00); - msleep(20); - return ret; -} - -static int m88rs2000_set_tuner_rf(struct dvb_frontend *fe) +static int m88rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) { struct m88rs2000_state *state = fe->demodulator_priv; - int reg; - reg = m88rs2000_tuner_read(state, 0x3d); - reg &= 0x7f; - if (reg < 0x16) - reg = 0xa1; - else if (reg == 0x16) - reg = 0x99; - else - reg = 0xf9; - m88rs2000_tuner_write(state, 0x60, reg); - reg = m88rs2000_tuner_gate_ctrl(state, 0x08); + *snr = 512 * m88rs2000_readreg(state, 0x65); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - return reg; + return 0; } -static int m88rs2000_set_tuner(struct dvb_frontend *fe, u16 *offset) +static int m88rs2000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { - struct dtv_frontend_properties *c = &fe->dtv_property_cache; struct m88rs2000_state *state = fe->demodulator_priv; - int ret; - u32 frequency = c->frequency; - s32 offset_khz; - s32 tmp; - u32 symbol_rate = (c->symbol_rate / 1000); - u32 f3db, gdiv28; - u16 value, ndiv, lpf_coeff; - u8 lpf_mxdiv, mlpf_max, mlpf_min, nlpf; - u8 lo = 0x01, div4 = 0x0; - - /* Reset Tuner */ - ret = m88rs2000_tab_set(state, tuner_reset); - - /* Calculate frequency divider */ - if (frequency < 1060000) { - lo |= 0x10; - div4 = 0x1; - ndiv = (frequency * 14 * 4) / FE_CRYSTAL_KHZ; - } else - ndiv = (frequency * 14 * 2) / FE_CRYSTAL_KHZ; - ndiv = ndiv + ndiv % 2; - ndiv = ndiv - 1024; - - ret = m88rs2000_tuner_write(state, 0x10, 0x80 | lo); - - /* Set frequency divider */ - ret |= m88rs2000_tuner_write(state, 0x01, (ndiv >> 8) & 0xf); - ret |= m88rs2000_tuner_write(state, 0x02, ndiv & 0xff); - - ret |= m88rs2000_tuner_write(state, 0x03, 0x06); - ret |= m88rs2000_tuner_gate_ctrl(state, 0x10); - if (ret < 0) - return -ENODEV; - - /* Tuner Frequency Range */ - ret = m88rs2000_tuner_write(state, 0x10, lo); - - ret |= m88rs2000_tuner_gate_ctrl(state, 0x08); - - /* Tuner RF */ - ret |= m88rs2000_set_tuner_rf(fe); - - gdiv28 = (FE_CRYSTAL_KHZ / 1000 * 1694 + 500) / 1000; - ret |= m88rs2000_tuner_write(state, 0x04, gdiv28 & 0xff); - ret |= m88rs2000_tuner_gate_ctrl(state, 0x04); - if (ret < 0) - return -ENODEV; - - value = m88rs2000_tuner_read(state, 0x26); - - f3db = (symbol_rate * 135) / 200 + 2000; - f3db += FREQ_OFFSET_LOW_SYM_RATE; - if (f3db < 7000) - f3db = 7000; - if (f3db > 40000) - f3db = 40000; - - gdiv28 = gdiv28 * 207 / (value * 2 + 151); - mlpf_max = gdiv28 * 135 / 100; - mlpf_min = gdiv28 * 78 / 100; - if (mlpf_max > 63) - mlpf_max = 63; - - lpf_coeff = 2766; - - nlpf = (f3db * gdiv28 * 2 / lpf_coeff / - (FE_CRYSTAL_KHZ / 1000) + 1) / 2; - if (nlpf > 23) - nlpf = 23; - if (nlpf < 1) - nlpf = 1; - - lpf_mxdiv = (nlpf * (FE_CRYSTAL_KHZ / 1000) - * lpf_coeff * 2 / f3db + 1) / 2; - - if (lpf_mxdiv < mlpf_min) { - nlpf++; - lpf_mxdiv = (nlpf * (FE_CRYSTAL_KHZ / 1000) - * lpf_coeff * 2 / f3db + 1) / 2; - } - - if (lpf_mxdiv > mlpf_max) - lpf_mxdiv = mlpf_max; - - ret = m88rs2000_tuner_write(state, 0x04, lpf_mxdiv); - ret |= m88rs2000_tuner_write(state, 0x06, nlpf); - - ret |= m88rs2000_tuner_gate_ctrl(state, 0x04); - - ret |= m88rs2000_tuner_gate_ctrl(state, 0x01); - - msleep(80); - /* calculate offset assuming 96000kHz*/ - offset_khz = (ndiv - ndiv % 2 + 1024) * FE_CRYSTAL_KHZ - / 14 / (div4 + 1) / 2; + u8 tmp; - offset_khz -= frequency; + *ucblocks = (m88rs2000_readreg(state, 0xd5) << 8) | + m88rs2000_readreg(state, 0xd4); + tmp = m88rs2000_readreg(state, 0xd8); + m88rs2000_writereg(state, 0xd8, tmp & ~0x20); + /* needs two times */ + m88rs2000_writereg(state, 0xd8, tmp | 0x20); + m88rs2000_writereg(state, 0xd8, tmp | 0x20); - tmp = offset_khz; - tmp *= 65536; - - tmp = (2 * tmp + 96000) / (2 * 96000); - if (tmp < 0) - tmp += 65536; - - *offset = tmp & 0xffff; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - - return (ret < 0) ? -EINVAL : 0; + return 0; } static int m88rs2000_set_fec(struct m88rs2000_state *state, @@ -692,7 +502,7 @@ static int m88rs2000_set_fec(struct m88rs2000_state *state, default: fec_set = 0x08; } - m88rs2000_demod_write(state, 0x76, fec_set); + m88rs2000_writereg(state, 0x76, fec_set); return 0; } @@ -701,9 +511,9 @@ static int m88rs2000_set_fec(struct m88rs2000_state *state, static fe_code_rate_t m88rs2000_get_fec(struct m88rs2000_state *state) { u8 reg; - m88rs2000_demod_write(state, 0x9a, 0x30); - reg = m88rs2000_demod_read(state, 0x76); - m88rs2000_demod_write(state, 0x9a, 0xb0); + m88rs2000_writereg(state, 0x9a, 0x30); + reg = m88rs2000_readreg(state, 0x76); + m88rs2000_writereg(state, 0x9a, 0xb0); switch (reg) { case 0x88: @@ -729,7 +539,9 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe) struct m88rs2000_state *state = fe->demodulator_priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; fe_status_t status; - int i, ret; + int i, ret = 0; + s32 tmp; + u32 tuner_freq; u16 offset = 0; u8 reg; @@ -743,17 +555,37 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe) } /* Set Tuner */ - ret = m88rs2000_set_tuner(fe, &offset); + if (fe->ops.tuner_ops.set_params) + ret = fe->ops.tuner_ops.set_params(fe); + + if (ret < 0) + return -ENODEV; + + if (fe->ops.tuner_ops.get_frequency) + ret = fe->ops.tuner_ops.get_frequency(fe, &tuner_freq); + if (ret < 0) return -ENODEV; - ret = m88rs2000_demod_write(state, 0x9a, 0x30); + offset = tuner_freq - c->frequency; + + /* calculate offset assuming 96000kHz*/ + tmp = offset; + tmp *= 65536; + + tmp = (2 * tmp + 96000) / (2 * 96000); + if (tmp < 0) + tmp += 65536; + + offset = tmp & 0xffff; + + ret = m88rs2000_writereg(state, 0x9a, 0x30); /* Unknown usually 0xc6 sometimes 0xc1 */ - reg = m88rs2000_demod_read(state, 0x86); - ret |= m88rs2000_demod_write(state, 0x86, reg); + reg = m88rs2000_readreg(state, 0x86); + ret |= m88rs2000_writereg(state, 0x86, reg); /* Offset lower nibble always 0 */ - ret |= m88rs2000_demod_write(state, 0x9c, (offset >> 8)); - ret |= m88rs2000_demod_write(state, 0x9d, offset & 0xf0); + ret |= m88rs2000_writereg(state, 0x9c, (offset >> 8)); + ret |= m88rs2000_writereg(state, 0x9d, offset & 0xf0); /* Reset Demod */ @@ -762,16 +594,16 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe) return -ENODEV; /* Unknown */ - reg = m88rs2000_demod_read(state, 0x70); - ret = m88rs2000_demod_write(state, 0x70, reg); + reg = m88rs2000_readreg(state, 0x70); + ret = m88rs2000_writereg(state, 0x70, reg); /* Set FEC */ ret |= m88rs2000_set_fec(state, c->fec_inner); - ret |= m88rs2000_demod_write(state, 0x85, 0x1); - ret |= m88rs2000_demod_write(state, 0x8a, 0xbf); - ret |= m88rs2000_demod_write(state, 0x8d, 0x1e); - ret |= m88rs2000_demod_write(state, 0x90, 0xf1); - ret |= m88rs2000_demod_write(state, 0x91, 0x08); + ret |= m88rs2000_writereg(state, 0x85, 0x1); + ret |= m88rs2000_writereg(state, 0x8a, 0xbf); + ret |= m88rs2000_writereg(state, 0x8d, 0x1e); + ret |= m88rs2000_writereg(state, 0x90, 0xf1); + ret |= m88rs2000_writereg(state, 0x91, 0x08); if (ret < 0) return -ENODEV; @@ -787,27 +619,25 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe) return -ENODEV; for (i = 0; i < 25; i++) { - reg = m88rs2000_demod_read(state, 0x8c); + reg = m88rs2000_readreg(state, 0x8c); if ((reg & 0x7) == 0x7) { status = FE_HAS_LOCK; break; } state->no_lock_count++; if (state->no_lock_count == 15) { - reg = m88rs2000_demod_read(state, 0x70); + reg = m88rs2000_readreg(state, 0x70); reg ^= 0x4; - m88rs2000_demod_write(state, 0x70, reg); + m88rs2000_writereg(state, 0x70, reg); state->no_lock_count = 0; } - if (state->no_lock_count == 20) - m88rs2000_set_tuner_rf(fe); msleep(20); } if (status & FE_HAS_LOCK) { state->fec_inner = m88rs2000_get_fec(state); /* Uknown suspect SNR level */ - reg = m88rs2000_demod_read(state, 0x65); + reg = m88rs2000_readreg(state, 0x65); } state->tuner_frequency = c->frequency; @@ -830,9 +660,9 @@ static int m88rs2000_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) struct m88rs2000_state *state = fe->demodulator_priv; if (enable) - m88rs2000_demod_write(state, 0x81, 0x84); + m88rs2000_writereg(state, 0x81, 0x84); else - m88rs2000_demod_write(state, 0x81, 0x81); + m88rs2000_writereg(state, 0x81, 0x81); udelay(10); return 0; } @@ -863,7 +693,6 @@ static struct dvb_frontend_ops m88rs2000_ops = { .release = m88rs2000_release, .init = m88rs2000_init, .sleep = m88rs2000_sleep, - .write = m88rs2000_write, .i2c_gate_ctrl = m88rs2000_i2c_gate_ctrl, .read_status = m88rs2000_read_status, .read_ber = m88rs2000_read_ber, @@ -896,9 +725,6 @@ struct dvb_frontend *m88rs2000_attach(const struct m88rs2000_config *config, state->symbol_rate = 0; state->fec_inner = 0; - if (m88rs2000_startup(state) < 0) - goto error; - /* create dvb_frontend */ memcpy(&state->frontend.ops, &m88rs2000_ops, sizeof(struct dvb_frontend_ops)); diff --git a/drivers/media/dvb-frontends/m88rs2000.h b/drivers/media/dvb-frontends/m88rs2000.h index 59acdb69687..5a8023e5a4b 100644 --- a/drivers/media/dvb-frontends/m88rs2000.h +++ b/drivers/media/dvb-frontends/m88rs2000.h @@ -26,8 +26,6 @@ struct m88rs2000_config { /* Demodulator i2c address */ u8 demod_addr; - /* Tuner address */ - u8 tuner_addr; u8 *inittab; @@ -55,12 +53,8 @@ static inline struct dvb_frontend *m88rs2000_attach( } #endif /* CONFIG_DVB_M88RS2000 */ -#define FE_CRYSTAL_KHZ 27000 -#define FREQ_OFFSET_LOW_SYM_RATE 3000 - enum { DEMOD_WRITE = 0x1, - TUNER_WRITE, WRITE_DELAY = 0x10, }; #endif /* M88RS2000_H */ diff --git a/drivers/media/dvb-frontends/mb86a16.h b/drivers/media/dvb-frontends/mb86a16.h index 6ea8c376394..277ce061acf 100644 --- a/drivers/media/dvb-frontends/mb86a16.h +++ b/drivers/media/dvb-frontends/mb86a16.h @@ -33,7 +33,7 @@ struct mb86a16_config { -#if defined(CONFIG_DVB_MB86A16) || (defined(CONFIG_DVB_MB86A16_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_MB86A16) extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, struct i2c_adapter *i2c_adap); diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c index fade566927c..f19cd736704 100644 --- a/drivers/media/dvb-frontends/mb86a20s.c +++ b/drivers/media/dvb-frontends/mb86a20s.c @@ -1,11 +1,9 @@ /* * Fujitu mb86a20s ISDB-T/ISDB-Tsb Module driver * - * Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com> + * Copyright (C) 2010-2013 Mauro Carvalho Chehab <mchehab@redhat.com> * Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com> * - * FIXME: Need to port to DVB v5.2 API - * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation version 2. @@ -26,24 +24,15 @@ static int debug = 1; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); -#define rc(args...) do { \ - printk(KERN_ERR "mb86a20s: " args); \ -} while (0) - -#define dprintk(args...) \ - do { \ - if (debug) { \ - printk(KERN_DEBUG "mb86a20s: %s: ", __func__); \ - printk(args); \ - } \ - } while (0) - struct mb86a20s_state { struct i2c_adapter *i2c; const struct mb86a20s_config *config; + u32 last_frequency; struct dvb_frontend frontend; + u32 estimated_rate[3]; + bool need_init; }; @@ -52,6 +41,8 @@ struct regdata { u8 data; }; +#define BER_SAMPLING_RATE 1 /* Seconds */ + /* * Initialization sequence: Use whatevere default values that PV SBTVD * does on its initialisation, obtained via USB snoop @@ -94,41 +85,68 @@ static struct regdata mb86a20s_init[] = { { 0x04, 0x13 }, { 0x05, 0xff }, { 0x04, 0x15 }, { 0x05, 0x4e }, { 0x04, 0x16 }, { 0x05, 0x20 }, - { 0x52, 0x01 }, - { 0x50, 0xa7 }, { 0x51, 0xff }, + + /* + * On this demod, when the bit count reaches the count below, + * it collects the bit error count. The bit counters are initialized + * to 65535 here. This warrants that all of them will be quickly + * calculated when device gets locked. As TMCC is parsed, the values + * will be adjusted later in the driver's code. + */ + { 0x52, 0x01 }, /* Turn on BER before Viterbi */ + { 0x50, 0xa7 }, { 0x51, 0x00 }, { 0x50, 0xa8 }, { 0x51, 0xff }, { 0x50, 0xa9 }, { 0x51, 0xff }, - { 0x50, 0xaa }, { 0x51, 0xff }, + { 0x50, 0xaa }, { 0x51, 0x00 }, { 0x50, 0xab }, { 0x51, 0xff }, { 0x50, 0xac }, { 0x51, 0xff }, - { 0x50, 0xad }, { 0x51, 0xff }, + { 0x50, 0xad }, { 0x51, 0x00 }, { 0x50, 0xae }, { 0x51, 0xff }, { 0x50, 0xaf }, { 0x51, 0xff }, - { 0x5e, 0x07 }, - { 0x50, 0xdc }, { 0x51, 0x01 }, - { 0x50, 0xdd }, { 0x51, 0xf4 }, - { 0x50, 0xde }, { 0x51, 0x01 }, - { 0x50, 0xdf }, { 0x51, 0xf4 }, - { 0x50, 0xe0 }, { 0x51, 0x01 }, - { 0x50, 0xe1 }, { 0x51, 0xf4 }, - { 0x50, 0xb0 }, { 0x51, 0x07 }, - { 0x50, 0xb2 }, { 0x51, 0xff }, - { 0x50, 0xb3 }, { 0x51, 0xff }, - { 0x50, 0xb4 }, { 0x51, 0xff }, - { 0x50, 0xb5 }, { 0x51, 0xff }, - { 0x50, 0xb6 }, { 0x51, 0xff }, - { 0x50, 0xb7 }, { 0x51, 0xff }, - { 0x50, 0x50 }, { 0x51, 0x02 }, - { 0x50, 0x51 }, { 0x51, 0x04 }, - { 0x45, 0x04 }, - { 0x48, 0x04 }, + + /* + * On this demod, post BER counts blocks. When the count reaches the + * value below, it collects the block error count. The block counters + * are initialized to 127 here. This warrants that all of them will be + * quickly calculated when device gets locked. As TMCC is parsed, the + * values will be adjusted later in the driver's code. + */ + { 0x5e, 0x07 }, /* Turn on BER after Viterbi */ + { 0x50, 0xdc }, { 0x51, 0x00 }, + { 0x50, 0xdd }, { 0x51, 0x7f }, + { 0x50, 0xde }, { 0x51, 0x00 }, + { 0x50, 0xdf }, { 0x51, 0x7f }, + { 0x50, 0xe0 }, { 0x51, 0x00 }, + { 0x50, 0xe1 }, { 0x51, 0x7f }, + + /* + * On this demod, when the block count reaches the count below, + * it collects the block error count. The block counters are initialized + * to 127 here. This warrants that all of them will be quickly + * calculated when device gets locked. As TMCC is parsed, the values + * will be adjusted later in the driver's code. + */ + { 0x50, 0xb0 }, { 0x51, 0x07 }, /* Enable PER */ + { 0x50, 0xb2 }, { 0x51, 0x00 }, + { 0x50, 0xb3 }, { 0x51, 0x7f }, + { 0x50, 0xb4 }, { 0x51, 0x00 }, + { 0x50, 0xb5 }, { 0x51, 0x7f }, + { 0x50, 0xb6 }, { 0x51, 0x00 }, + { 0x50, 0xb7 }, { 0x51, 0x7f }, + + { 0x50, 0x50 }, { 0x51, 0x02 }, /* MER manual mode */ + { 0x50, 0x51 }, { 0x51, 0x04 }, /* MER symbol 4 */ + { 0x45, 0x04 }, /* CN symbol 4 */ + { 0x48, 0x04 }, /* CN manual mode */ + { 0x50, 0xd5 }, { 0x51, 0x01 }, /* Serial */ { 0x50, 0xd6 }, { 0x51, 0x1f }, { 0x50, 0xd2 }, { 0x51, 0x03 }, { 0x50, 0xd7 }, { 0x51, 0x3f }, { 0x28, 0x74 }, { 0x29, 0x00 }, { 0x28, 0x74 }, { 0x29, 0x40 }, { 0x28, 0x46 }, { 0x29, 0x2c }, { 0x28, 0x46 }, { 0x29, 0x0c }, - { 0x04, 0x40 }, { 0x05, 0x01 }, + + { 0x04, 0x40 }, { 0x05, 0x00 }, { 0x28, 0x00 }, { 0x29, 0x10 }, { 0x28, 0x05 }, { 0x29, 0x02 }, { 0x1c, 0x01 }, @@ -176,8 +194,24 @@ static struct regdata mb86a20s_reset_reception[] = { { 0x08, 0x00 }, }; +static struct regdata mb86a20s_per_ber_reset[] = { + { 0x53, 0x00 }, /* pre BER Counter reset */ + { 0x53, 0x07 }, + + { 0x5f, 0x00 }, /* post BER Counter reset */ + { 0x5f, 0x07 }, + + { 0x50, 0xb1 }, /* PER Counter reset */ + { 0x51, 0x07 }, + { 0x51, 0x00 }, +}; + +/* + * I2C read/write functions and macros + */ + static int mb86a20s_i2c_writereg(struct mb86a20s_state *state, - u8 i2c_addr, int reg, int data) + u8 i2c_addr, u8 reg, u8 data) { u8 buf[] = { reg, data }; struct i2c_msg msg = { @@ -187,8 +221,9 @@ static int mb86a20s_i2c_writereg(struct mb86a20s_state *state, rc = i2c_transfer(state->i2c, &msg, 1); if (rc != 1) { - printk("%s: writereg error (rc == %i, reg == 0x%02x," - " data == 0x%02x)\n", __func__, rc, reg, data); + dev_err(&state->i2c->dev, + "%s: writereg error (rc == %i, reg == 0x%02x, data == 0x%02x)\n", + __func__, rc, reg, data); return rc; } @@ -222,8 +257,9 @@ static int mb86a20s_i2c_readreg(struct mb86a20s_state *state, rc = i2c_transfer(state->i2c, msg, 2); if (rc != 2) { - rc("%s: reg=0x%x (error=%d)\n", __func__, reg, rc); - return rc; + dev_err(&state->i2c->dev, "%s: reg=0x%x (error=%d)\n", + __func__, reg, rc); + return (rc < 0) ? rc : -EIO; } return val; @@ -237,100 +273,22 @@ static int mb86a20s_i2c_readreg(struct mb86a20s_state *state, mb86a20s_i2c_writeregdata(state, state->config->demod_address, \ regdata, ARRAY_SIZE(regdata)) -static int mb86a20s_initfe(struct dvb_frontend *fe) -{ - struct mb86a20s_state *state = fe->demodulator_priv; - int rc; - u8 regD5 = 1; - - dprintk("\n"); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - - /* Initialize the frontend */ - rc = mb86a20s_writeregdata(state, mb86a20s_init); - if (rc < 0) - goto err; - - if (!state->config->is_serial) { - regD5 &= ~1; - - rc = mb86a20s_writereg(state, 0x50, 0xd5); - if (rc < 0) - goto err; - rc = mb86a20s_writereg(state, 0x51, regD5); - if (rc < 0) - goto err; - } - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - -err: - if (rc < 0) { - state->need_init = true; - printk(KERN_INFO "mb86a20s: Init failed. Will try again later\n"); - } else { - state->need_init = false; - dprintk("Initialization succeeded.\n"); - } - return rc; -} - -static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength) -{ - struct mb86a20s_state *state = fe->demodulator_priv; - unsigned rf_max, rf_min, rf; - u8 val; - - dprintk("\n"); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - - /* Does a binary search to get RF strength */ - rf_max = 0xfff; - rf_min = 0; - do { - rf = (rf_max + rf_min) / 2; - mb86a20s_writereg(state, 0x04, 0x1f); - mb86a20s_writereg(state, 0x05, rf >> 8); - mb86a20s_writereg(state, 0x04, 0x20); - mb86a20s_writereg(state, 0x04, rf); - - val = mb86a20s_readreg(state, 0x02); - if (val & 0x08) - rf_min = (rf_max + rf_min) / 2; - else - rf_max = (rf_max + rf_min) / 2; - if (rf_max - rf_min < 4) { - *strength = (((rf_max + rf_min) / 2) * 65535) / 4095; - break; - } - } while (1); - - dprintk("signal strength = %d\n", *strength); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - - return 0; -} +/* + * Ancillary internal routines (likely compiled inlined) + * + * The functions below assume that gateway lock has already obtained + */ static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct mb86a20s_state *state = fe->demodulator_priv; - u8 val; + int val; - dprintk("\n"); *status = 0; - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); val = mb86a20s_readreg(state, 0x0a) & 0xf; - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); + if (val < 0) + return val; if (val >= 2) *status |= FE_HAS_SIGNAL; @@ -347,49 +305,56 @@ static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status) if (val >= 8) /* Maybe 9? */ *status |= FE_HAS_LOCK; - dprintk("val = %d, status = 0x%02x\n", val, *status); + dev_dbg(&state->i2c->dev, "%s: Status = 0x%02x (state = %d)\n", + __func__, *status, val); return 0; } -static int mb86a20s_set_frontend(struct dvb_frontend *fe) +static int mb86a20s_read_signal_strength(struct dvb_frontend *fe) { struct mb86a20s_state *state = fe->demodulator_priv; int rc; -#if 0 - /* - * FIXME: Properly implement the set frontend properties - */ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; -#endif - - dprintk("\n"); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - dprintk("Calling tuner set parameters\n"); - fe->ops.tuner_ops.set_params(fe); + unsigned rf_max, rf_min, rf; - /* - * Make it more reliable: if, for some reason, the initial - * device initialization doesn't happen, initialize it when - * a SBTVD parameters are adjusted. - * - * Unfortunately, due to a hard to track bug at tda829x/tda18271, - * the agc callback logic is not called during DVB attach time, - * causing mb86a20s to not be initialized with Kworld SBTVD. - * So, this hack is needed, in order to make Kworld SBTVD to work. - */ - if (state->need_init) - mb86a20s_initfe(fe); + /* Does a binary search to get RF strength */ + rf_max = 0xfff; + rf_min = 0; + do { + rf = (rf_max + rf_min) / 2; + rc = mb86a20s_writereg(state, 0x04, 0x1f); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x05, rf >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x04, 0x20); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x04, rf); + if (rc < 0) + return rc; - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); + rc = mb86a20s_readreg(state, 0x02); + if (rc < 0) + return rc; + if (rc & 0x08) + rf_min = (rf_max + rf_min) / 2; + else + rf_max = (rf_max + rf_min) / 2; + if (rf_max - rf_min < 4) { + rf = (rf_max + rf_min) / 2; + + /* Rescale it from 2^12 (4096) to 2^16 */ + rf <<= (16 - 12); + dev_dbg(&state->i2c->dev, + "%s: signal strength = %d (%d < RF=%d < %d)\n", + __func__, rf, rf_min, rf >> 4, rf_max); + return rf; + } + } while (1); - return rc; + return 0; } static int mb86a20s_get_modulation(struct mb86a20s_state *state, @@ -410,7 +375,7 @@ static int mb86a20s_get_modulation(struct mb86a20s_state *state, rc = mb86a20s_readreg(state, 0x6e); if (rc < 0) return rc; - switch ((rc & 0x70) >> 4) { + switch ((rc >> 4) & 0x07) { case 0: return DQPSK; case 1: @@ -443,7 +408,7 @@ static int mb86a20s_get_fec(struct mb86a20s_state *state, rc = mb86a20s_readreg(state, 0x6e); if (rc < 0) return rc; - switch (rc) { + switch ((rc >> 4) & 0x07) { case 0: return FEC_1_2; case 1: @@ -478,24 +443,38 @@ static int mb86a20s_get_interleaving(struct mb86a20s_state *state, rc = mb86a20s_readreg(state, 0x6e); if (rc < 0) return rc; - if (rc > 3) - return -EINVAL; /* Not used */ - return rc; + + switch ((rc >> 4) & 0x07) { + case 1: + return GUARD_INTERVAL_1_4; + case 2: + return GUARD_INTERVAL_1_8; + case 3: + return GUARD_INTERVAL_1_16; + case 4: + return GUARD_INTERVAL_1_32; + + default: + case 0: + return GUARD_INTERVAL_AUTO; + } } static int mb86a20s_get_segment_count(struct mb86a20s_state *state, unsigned layer) { int rc, count; - static unsigned char reg[] = { [0] = 0x89, /* Layer A */ [1] = 0x8d, /* Layer B */ [2] = 0x91, /* Layer C */ }; + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + if (layer >= ARRAY_SIZE(reg)) return -EINVAL; + rc = mb86a20s_writereg(state, 0x6d, reg[layer]); if (rc < 0) return rc; @@ -504,113 +483,1451 @@ static int mb86a20s_get_segment_count(struct mb86a20s_state *state, return rc; count = (rc >> 4) & 0x0f; + dev_dbg(&state->i2c->dev, "%s: segments: %d.\n", __func__, count); + return count; } +static void mb86a20s_reset_frontend_cache(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Fixed parameters */ + c->delivery_system = SYS_ISDBT; + c->bandwidth_hz = 6000000; + + /* Initialize values that will be later autodetected */ + c->isdbt_layer_enabled = 0; + c->transmission_mode = TRANSMISSION_MODE_AUTO; + c->guard_interval = GUARD_INTERVAL_AUTO; + c->isdbt_sb_mode = 0; + c->isdbt_sb_segment_count = 0; +} + +/* + * Estimates the bit rate using the per-segment bit rate given by + * ABNT/NBR 15601 spec (table 4). + */ +static u32 isdbt_rate[3][5][4] = { + { /* DQPSK/QPSK */ + { 280850, 312060, 330420, 340430 }, /* 1/2 */ + { 374470, 416080, 440560, 453910 }, /* 2/3 */ + { 421280, 468090, 495630, 510650 }, /* 3/4 */ + { 468090, 520100, 550700, 567390 }, /* 5/6 */ + { 491500, 546110, 578230, 595760 }, /* 7/8 */ + }, { /* QAM16 */ + { 561710, 624130, 660840, 680870 }, /* 1/2 */ + { 748950, 832170, 881120, 907820 }, /* 2/3 */ + { 842570, 936190, 991260, 1021300 }, /* 3/4 */ + { 936190, 1040210, 1101400, 1134780 }, /* 5/6 */ + { 983000, 1092220, 1156470, 1191520 }, /* 7/8 */ + }, { /* QAM64 */ + { 842570, 936190, 991260, 1021300 }, /* 1/2 */ + { 1123430, 1248260, 1321680, 1361740 }, /* 2/3 */ + { 1263860, 1404290, 1486900, 1531950 }, /* 3/4 */ + { 1404290, 1560320, 1652110, 1702170 }, /* 5/6 */ + { 1474500, 1638340, 1734710, 1787280 }, /* 7/8 */ + } +}; + +static void mb86a20s_layer_bitrate(struct dvb_frontend *fe, u32 layer, + u32 modulation, u32 fec, u32 interleaving, + u32 segment) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + u32 rate; + int m, f, i; + + /* + * If modulation/fec/interleaving is not detected, the default is + * to consider the lowest bit rate, to avoid taking too long time + * to get BER. + */ + switch (modulation) { + case DQPSK: + case QPSK: + default: + m = 0; + break; + case QAM_16: + m = 1; + break; + case QAM_64: + m = 2; + break; + } + + switch (fec) { + default: + case FEC_1_2: + case FEC_AUTO: + f = 0; + break; + case FEC_2_3: + f = 1; + break; + case FEC_3_4: + f = 2; + break; + case FEC_5_6: + f = 3; + break; + case FEC_7_8: + f = 4; + break; + } + + switch (interleaving) { + default: + case GUARD_INTERVAL_1_4: + i = 0; + break; + case GUARD_INTERVAL_1_8: + i = 1; + break; + case GUARD_INTERVAL_1_16: + i = 2; + break; + case GUARD_INTERVAL_1_32: + i = 3; + break; + } + + /* Samples BER at BER_SAMPLING_RATE seconds */ + rate = isdbt_rate[m][f][i] * segment * BER_SAMPLING_RATE; + + /* Avoids sampling too quickly or to overflow the register */ + if (rate < 256) + rate = 256; + else if (rate > (1 << 24) - 1) + rate = (1 << 24) - 1; + + dev_dbg(&state->i2c->dev, + "%s: layer %c bitrate: %d kbps; counter = %d (0x%06x)\n", + __func__, 'A' + layer, segment * isdbt_rate[m][f][i]/1000, + rate, rate); + + state->estimated_rate[i] = rate; +} + + static int mb86a20s_get_frontend(struct dvb_frontend *fe) { struct mb86a20s_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; int i, rc; - /* Fixed parameters */ - p->delivery_system = SYS_ISDBT; - p->bandwidth_hz = 6000000; + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); + /* Reset frontend cache to default values */ + mb86a20s_reset_frontend_cache(fe); /* Check for partial reception */ rc = mb86a20s_writereg(state, 0x6d, 0x85); - if (rc >= 0) - rc = mb86a20s_readreg(state, 0x6e); - if (rc >= 0) - p->isdbt_partial_reception = (rc & 0x10) ? 1 : 0; + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x6e); + if (rc < 0) + return rc; + c->isdbt_partial_reception = (rc & 0x10) ? 1 : 0; /* Get per-layer data */ - p->isdbt_layer_enabled = 0; + for (i = 0; i < 3; i++) { + dev_dbg(&state->i2c->dev, "%s: getting data for layer %c.\n", + __func__, 'A' + i); + rc = mb86a20s_get_segment_count(state, i); - if (rc >= 0 && rc < 14) - p->layer[i].segment_count = rc; - if (rc == 0x0f) + if (rc < 0) + goto noperlayer_error; + if (rc >= 0 && rc < 14) { + c->layer[i].segment_count = rc; + } else { + c->layer[i].segment_count = 0; + state->estimated_rate[i] = 0; continue; - p->isdbt_layer_enabled |= 1 << i; + } + c->isdbt_layer_enabled |= 1 << i; rc = mb86a20s_get_modulation(state, i); - if (rc >= 0) - p->layer[i].modulation = rc; + if (rc < 0) + goto noperlayer_error; + dev_dbg(&state->i2c->dev, "%s: modulation %d.\n", + __func__, rc); + c->layer[i].modulation = rc; rc = mb86a20s_get_fec(state, i); - if (rc >= 0) - p->layer[i].fec = rc; + if (rc < 0) + goto noperlayer_error; + dev_dbg(&state->i2c->dev, "%s: FEC %d.\n", + __func__, rc); + c->layer[i].fec = rc; rc = mb86a20s_get_interleaving(state, i); - if (rc >= 0) - p->layer[i].interleaving = rc; + if (rc < 0) + goto noperlayer_error; + dev_dbg(&state->i2c->dev, "%s: interleaving %d.\n", + __func__, rc); + c->layer[i].interleaving = rc; + mb86a20s_layer_bitrate(fe, i, c->layer[i].modulation, + c->layer[i].fec, + c->layer[i].interleaving, + c->layer[i].segment_count); } - p->isdbt_sb_mode = 0; rc = mb86a20s_writereg(state, 0x6d, 0x84); - if ((rc >= 0) && ((rc & 0x60) == 0x20)) { - p->isdbt_sb_mode = 1; + if (rc < 0) + return rc; + if ((rc & 0x60) == 0x20) { + c->isdbt_sb_mode = 1; /* At least, one segment should exist */ - if (!p->isdbt_sb_segment_count) - p->isdbt_sb_segment_count = 1; - } else - p->isdbt_sb_segment_count = 0; + if (!c->isdbt_sb_segment_count) + c->isdbt_sb_segment_count = 1; + } /* Get transmission mode and guard interval */ - p->transmission_mode = TRANSMISSION_MODE_AUTO; - p->guard_interval = GUARD_INTERVAL_AUTO; rc = mb86a20s_readreg(state, 0x07); - if (rc >= 0) { - if ((rc & 0x60) == 0x20) { - switch (rc & 0x0c >> 2) { - case 0: - p->transmission_mode = TRANSMISSION_MODE_2K; - break; - case 1: - p->transmission_mode = TRANSMISSION_MODE_4K; - break; - case 2: - p->transmission_mode = TRANSMISSION_MODE_8K; - break; - } + if (rc < 0) + return rc; + if ((rc & 0x60) == 0x20) { + switch (rc & 0x0c >> 2) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_4K; + break; + case 2: + c->transmission_mode = TRANSMISSION_MODE_8K; + break; + } + } + if (!(rc & 0x10)) { + switch (rc & 0x3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + } + } + return 0; + +noperlayer_error: + + /* per-layer info is incomplete; discard all per-layer */ + c->isdbt_layer_enabled = 0; + + return rc; +} + +static int mb86a20s_reset_counters(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc, val; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Reset the counters, if the channel changed */ + if (state->last_frequency != c->frequency) { + memset(&c->strength, 0, sizeof(c->strength)); + memset(&c->cnr, 0, sizeof(c->cnr)); + memset(&c->pre_bit_error, 0, sizeof(c->pre_bit_error)); + memset(&c->pre_bit_count, 0, sizeof(c->pre_bit_count)); + memset(&c->post_bit_error, 0, sizeof(c->post_bit_error)); + memset(&c->post_bit_count, 0, sizeof(c->post_bit_count)); + memset(&c->block_error, 0, sizeof(c->block_error)); + memset(&c->block_count, 0, sizeof(c->block_count)); + + state->last_frequency = c->frequency; + } + + /* Clear status for most stats */ + + /* BER/PER counter reset */ + rc = mb86a20s_writeregdata(state, mb86a20s_per_ber_reset); + if (rc < 0) + goto err; + + /* CNR counter reset */ + rc = mb86a20s_readreg(state, 0x45); + if (rc < 0) + goto err; + val = rc; + rc = mb86a20s_writereg(state, 0x45, val | 0x10); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x45, val & 0x6f); + if (rc < 0) + goto err; + + /* MER counter reset */ + rc = mb86a20s_writereg(state, 0x50, 0x50); + if (rc < 0) + goto err; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + goto err; + val = rc; + rc = mb86a20s_writereg(state, 0x51, val | 0x01); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x51, val & 0x06); + if (rc < 0) + goto err; + + goto ok; +err: + dev_err(&state->i2c->dev, + "%s: Can't reset FE statistics (error %d).\n", + __func__, rc); +ok: + return rc; +} + +static int mb86a20s_get_pre_ber(struct dvb_frontend *fe, + unsigned layer, + u32 *error, u32 *count) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int rc, val; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (layer >= 3) + return -EINVAL; + + /* Check if the BER measures are already available */ + rc = mb86a20s_readreg(state, 0x54); + if (rc < 0) + return rc; + + /* Check if data is available for that layer */ + if (!(rc & (1 << layer))) { + dev_dbg(&state->i2c->dev, + "%s: preBER for layer %c is not available yet.\n", + __func__, 'A' + layer); + return -EBUSY; + } + + /* Read Bit Error Count */ + rc = mb86a20s_readreg(state, 0x55 + layer * 3); + if (rc < 0) + return rc; + *error = rc << 16; + rc = mb86a20s_readreg(state, 0x56 + layer * 3); + if (rc < 0) + return rc; + *error |= rc << 8; + rc = mb86a20s_readreg(state, 0x57 + layer * 3); + if (rc < 0) + return rc; + *error |= rc; + + dev_dbg(&state->i2c->dev, + "%s: bit error before Viterbi for layer %c: %d.\n", + __func__, 'A' + layer, *error); + + /* Read Bit Count */ + rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count = rc << 16; + rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count |= rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count |= rc; + + dev_dbg(&state->i2c->dev, + "%s: bit count before Viterbi for layer %c: %d.\n", + __func__, 'A' + layer, *count); + + + /* + * As we get TMCC data from the frontend, we can better estimate the + * BER bit counters, in order to do the BER measure during a longer + * time. Use those data, if available, to update the bit count + * measure. + */ + + if (state->estimated_rate[layer] + && state->estimated_rate[layer] != *count) { + dev_dbg(&state->i2c->dev, + "%s: updating layer %c preBER counter to %d.\n", + __func__, 'A' + layer, state->estimated_rate[layer]); + + /* Turn off BER before Viterbi */ + rc = mb86a20s_writereg(state, 0x52, 0x00); + + /* Update counter for this layer */ + rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, + state->estimated_rate[layer] >> 16); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, + state->estimated_rate[layer] >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, + state->estimated_rate[layer]); + if (rc < 0) + return rc; + + /* Turn on BER before Viterbi */ + rc = mb86a20s_writereg(state, 0x52, 0x01); + + /* Reset all preBER counters */ + rc = mb86a20s_writereg(state, 0x53, 0x00); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x53, 0x07); + } else { + /* Reset counter to collect new data */ + rc = mb86a20s_readreg(state, 0x53); + if (rc < 0) + return rc; + val = rc; + rc = mb86a20s_writereg(state, 0x53, val & ~(1 << layer)); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x53, val | (1 << layer)); + } + + return rc; +} + +static int mb86a20s_get_post_ber(struct dvb_frontend *fe, + unsigned layer, + u32 *error, u32 *count) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + u32 counter, collect_rate; + int rc, val; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (layer >= 3) + return -EINVAL; + + /* Check if the BER measures are already available */ + rc = mb86a20s_readreg(state, 0x60); + if (rc < 0) + return rc; + + /* Check if data is available for that layer */ + if (!(rc & (1 << layer))) { + dev_dbg(&state->i2c->dev, + "%s: post BER for layer %c is not available yet.\n", + __func__, 'A' + layer); + return -EBUSY; + } + + /* Read Bit Error Count */ + rc = mb86a20s_readreg(state, 0x64 + layer * 3); + if (rc < 0) + return rc; + *error = rc << 16; + rc = mb86a20s_readreg(state, 0x65 + layer * 3); + if (rc < 0) + return rc; + *error |= rc << 8; + rc = mb86a20s_readreg(state, 0x66 + layer * 3); + if (rc < 0) + return rc; + *error |= rc; + + dev_dbg(&state->i2c->dev, + "%s: post bit error for layer %c: %d.\n", + __func__, 'A' + layer, *error); + + /* Read Bit Count */ + rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + counter = rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + counter |= rc; + *count = counter * 204 * 8; + + dev_dbg(&state->i2c->dev, + "%s: post bit count for layer %c: %d.\n", + __func__, 'A' + layer, *count); + + /* + * As we get TMCC data from the frontend, we can better estimate the + * BER bit counters, in order to do the BER measure during a longer + * time. Use those data, if available, to update the bit count + * measure. + */ + + if (!state->estimated_rate[layer]) + goto reset_measurement; + + collect_rate = state->estimated_rate[layer] / 204 / 8; + if (collect_rate < 32) + collect_rate = 32; + if (collect_rate > 65535) + collect_rate = 65535; + if (collect_rate != counter) { + dev_dbg(&state->i2c->dev, + "%s: updating postBER counter on layer %c to %d.\n", + __func__, 'A' + layer, collect_rate); + + /* Turn off BER after Viterbi */ + rc = mb86a20s_writereg(state, 0x5e, 0x00); + + /* Update counter for this layer */ + rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff); + if (rc < 0) + return rc; + + /* Turn on BER after Viterbi */ + rc = mb86a20s_writereg(state, 0x5e, 0x07); + + /* Reset all preBER counters */ + rc = mb86a20s_writereg(state, 0x5f, 0x00); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x5f, 0x07); + + return rc; + } + +reset_measurement: + /* Reset counter to collect new data */ + rc = mb86a20s_readreg(state, 0x5f); + if (rc < 0) + return rc; + val = rc; + rc = mb86a20s_writereg(state, 0x5f, val & ~(1 << layer)); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x5f, val | (1 << layer)); + + return rc; +} + +static int mb86a20s_get_blk_error(struct dvb_frontend *fe, + unsigned layer, + u32 *error, u32 *count) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int rc, val; + u32 collect_rate; + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (layer >= 3) + return -EINVAL; + + /* Check if the PER measures are already available */ + rc = mb86a20s_writereg(state, 0x50, 0xb8); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + + /* Check if data is available for that layer */ + + if (!(rc & (1 << layer))) { + dev_dbg(&state->i2c->dev, + "%s: block counts for layer %c aren't available yet.\n", + __func__, 'A' + layer); + return -EBUSY; + } + + /* Read Packet error Count */ + rc = mb86a20s_writereg(state, 0x50, 0xb9 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *error = rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xba + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *error |= rc; + dev_err(&state->i2c->dev, "%s: block error for layer %c: %d.\n", + __func__, 'A' + layer, *error); + + /* Read Bit Count */ + rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count = rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count |= rc; + + dev_dbg(&state->i2c->dev, + "%s: block count for layer %c: %d.\n", + __func__, 'A' + layer, *count); + + /* + * As we get TMCC data from the frontend, we can better estimate the + * BER bit counters, in order to do the BER measure during a longer + * time. Use those data, if available, to update the bit count + * measure. + */ + + if (!state->estimated_rate[layer]) + goto reset_measurement; + + collect_rate = state->estimated_rate[layer] / 204 / 8; + if (collect_rate < 32) + collect_rate = 32; + if (collect_rate > 65535) + collect_rate = 65535; + + if (collect_rate != *count) { + dev_dbg(&state->i2c->dev, + "%s: updating PER counter on layer %c to %d.\n", + __func__, 'A' + layer, collect_rate); + + /* Stop PER measurement */ + rc = mb86a20s_writereg(state, 0x50, 0xb0); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, 0x00); + if (rc < 0) + return rc; + + /* Update this layer's counter */ + rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff); + if (rc < 0) + return rc; + + /* start PER measurement */ + rc = mb86a20s_writereg(state, 0x50, 0xb0); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, 0x07); + if (rc < 0) + return rc; + + /* Reset all counters to collect new data */ + rc = mb86a20s_writereg(state, 0x50, 0xb1); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, 0x07); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, 0x00); + + return rc; + } + +reset_measurement: + /* Reset counter to collect new data */ + rc = mb86a20s_writereg(state, 0x50, 0xb1); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + val = rc; + rc = mb86a20s_writereg(state, 0x51, val | (1 << layer)); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, val & ~(1 << layer)); + + return rc; +} + +struct linear_segments { + unsigned x, y; +}; + +/* + * All tables below return a dB/1000 measurement + */ + +static struct linear_segments cnr_to_db_table[] = { + { 19648, 0}, + { 18187, 1000}, + { 16534, 2000}, + { 14823, 3000}, + { 13161, 4000}, + { 11622, 5000}, + { 10279, 6000}, + { 9089, 7000}, + { 8042, 8000}, + { 7137, 9000}, + { 6342, 10000}, + { 5641, 11000}, + { 5030, 12000}, + { 4474, 13000}, + { 3988, 14000}, + { 3556, 15000}, + { 3180, 16000}, + { 2841, 17000}, + { 2541, 18000}, + { 2276, 19000}, + { 2038, 20000}, + { 1800, 21000}, + { 1625, 22000}, + { 1462, 23000}, + { 1324, 24000}, + { 1175, 25000}, + { 1063, 26000}, + { 980, 27000}, + { 907, 28000}, + { 840, 29000}, + { 788, 30000}, +}; + +static struct linear_segments cnr_64qam_table[] = { + { 3922688, 0}, + { 3920384, 1000}, + { 3902720, 2000}, + { 3894784, 3000}, + { 3882496, 4000}, + { 3872768, 5000}, + { 3858944, 6000}, + { 3851520, 7000}, + { 3838976, 8000}, + { 3829248, 9000}, + { 3818240, 10000}, + { 3806976, 11000}, + { 3791872, 12000}, + { 3767040, 13000}, + { 3720960, 14000}, + { 3637504, 15000}, + { 3498496, 16000}, + { 3296000, 17000}, + { 3031040, 18000}, + { 2715392, 19000}, + { 2362624, 20000}, + { 1963264, 21000}, + { 1649664, 22000}, + { 1366784, 23000}, + { 1120768, 24000}, + { 890880, 25000}, + { 723456, 26000}, + { 612096, 27000}, + { 518912, 28000}, + { 448256, 29000}, + { 388864, 30000}, +}; + +static struct linear_segments cnr_16qam_table[] = { + { 5314816, 0}, + { 5219072, 1000}, + { 5118720, 2000}, + { 4998912, 3000}, + { 4875520, 4000}, + { 4736000, 5000}, + { 4604160, 6000}, + { 4458752, 7000}, + { 4300288, 8000}, + { 4092928, 9000}, + { 3836160, 10000}, + { 3521024, 11000}, + { 3155968, 12000}, + { 2756864, 13000}, + { 2347008, 14000}, + { 1955072, 15000}, + { 1593600, 16000}, + { 1297920, 17000}, + { 1043968, 18000}, + { 839680, 19000}, + { 672256, 20000}, + { 523008, 21000}, + { 424704, 22000}, + { 345088, 23000}, + { 280064, 24000}, + { 221440, 25000}, + { 179712, 26000}, + { 151040, 27000}, + { 128512, 28000}, + { 110080, 29000}, + { 95744, 30000}, +}; + +struct linear_segments cnr_qpsk_table[] = { + { 2834176, 0}, + { 2683648, 1000}, + { 2536960, 2000}, + { 2391808, 3000}, + { 2133248, 4000}, + { 1906176, 5000}, + { 1666560, 6000}, + { 1422080, 7000}, + { 1189632, 8000}, + { 976384, 9000}, + { 790272, 10000}, + { 633344, 11000}, + { 505600, 12000}, + { 402944, 13000}, + { 320768, 14000}, + { 255488, 15000}, + { 204032, 16000}, + { 163072, 17000}, + { 130304, 18000}, + { 105216, 19000}, + { 83456, 20000}, + { 65024, 21000}, + { 52480, 22000}, + { 42752, 23000}, + { 34560, 24000}, + { 27136, 25000}, + { 22016, 26000}, + { 18432, 27000}, + { 15616, 28000}, + { 13312, 29000}, + { 11520, 30000}, +}; + +static u32 interpolate_value(u32 value, struct linear_segments *segments, + unsigned len) +{ + u64 tmp64; + u32 dx, dy; + int i, ret; + + if (value >= segments[0].x) + return segments[0].y; + if (value < segments[len-1].x) + return segments[len-1].y; + + for (i = 1; i < len - 1; i++) { + /* If value is identical, no need to interpolate */ + if (value == segments[i].x) + return segments[i].y; + if (value > segments[i].x) + break; + } + + /* Linear interpolation between the two (x,y) points */ + dy = segments[i].y - segments[i - 1].y; + dx = segments[i - 1].x - segments[i].x; + tmp64 = value - segments[i].x; + tmp64 *= dy; + do_div(tmp64, dx); + ret = segments[i].y - tmp64; + + return ret; +} + +static int mb86a20s_get_main_CNR(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 cnr_linear, cnr; + int rc, val; + + /* Check if CNR is available */ + rc = mb86a20s_readreg(state, 0x45); + if (rc < 0) + return rc; + + if (!(rc & 0x40)) { + dev_info(&state->i2c->dev, "%s: CNR is not available yet.\n", + __func__); + return -EBUSY; + } + val = rc; + + rc = mb86a20s_readreg(state, 0x46); + if (rc < 0) + return rc; + cnr_linear = rc << 8; + + rc = mb86a20s_readreg(state, 0x46); + if (rc < 0) + return rc; + cnr_linear |= rc; + + cnr = interpolate_value(cnr_linear, + cnr_to_db_table, ARRAY_SIZE(cnr_to_db_table)); + + c->cnr.stat[0].scale = FE_SCALE_DECIBEL; + c->cnr.stat[0].svalue = cnr; + + dev_dbg(&state->i2c->dev, "%s: CNR is %d.%03d dB (%d)\n", + __func__, cnr / 1000, cnr % 1000, cnr_linear); + + /* CNR counter reset */ + rc = mb86a20s_writereg(state, 0x45, val | 0x10); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x45, val & 0x6f); + + return rc; +} + +static int mb86a20s_get_blk_error_layer_CNR(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 mer, cnr; + int rc, val, i; + struct linear_segments *segs; + unsigned segs_len; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Check if the measures are already available */ + rc = mb86a20s_writereg(state, 0x50, 0x5b); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + + /* Check if data is available */ + if (!(rc & 0x01)) { + dev_info(&state->i2c->dev, + "%s: MER measures aren't available yet.\n", __func__); + return -EBUSY; + } + + /* Read all layers */ + for (i = 0; i < 3; i++) { + if (!(c->isdbt_layer_enabled & (1 << i))) { + c->cnr.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + continue; + } + + rc = mb86a20s_writereg(state, 0x50, 0x52 + i * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + mer = rc << 16; + rc = mb86a20s_writereg(state, 0x50, 0x53 + i * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + mer |= rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0x54 + i * 3); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + mer |= rc; + + switch (c->layer[i].modulation) { + case DQPSK: + case QPSK: + segs = cnr_qpsk_table; + segs_len = ARRAY_SIZE(cnr_qpsk_table); + break; + case QAM_16: + segs = cnr_16qam_table; + segs_len = ARRAY_SIZE(cnr_16qam_table); + break; + default: + case QAM_64: + segs = cnr_64qam_table; + segs_len = ARRAY_SIZE(cnr_64qam_table); + break; } - if (!(rc & 0x10)) { - switch (rc & 0x3) { - case 0: - p->guard_interval = GUARD_INTERVAL_1_4; - break; - case 1: - p->guard_interval = GUARD_INTERVAL_1_8; - break; - case 2: - p->guard_interval = GUARD_INTERVAL_1_16; - break; + cnr = interpolate_value(mer, segs, segs_len); + + c->cnr.stat[1 + i].scale = FE_SCALE_DECIBEL; + c->cnr.stat[1 + i].svalue = cnr; + + dev_dbg(&state->i2c->dev, + "%s: CNR for layer %c is %d.%03d dB (MER = %d).\n", + __func__, 'A' + i, cnr / 1000, cnr % 1000, mer); + + } + + /* Start a new MER measurement */ + /* MER counter reset */ + rc = mb86a20s_writereg(state, 0x50, 0x50); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + val = rc; + + rc = mb86a20s_writereg(state, 0x51, val | 0x01); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, val & 0x06); + if (rc < 0) + return rc; + + return 0; +} + +static void mb86a20s_stats_not_ready(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int i; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Fill the length of each status counter */ + + /* Only global stats */ + c->strength.len = 1; + + /* Per-layer stats - 3 layers + global */ + c->cnr.len = 4; + c->pre_bit_error.len = 4; + c->pre_bit_count.len = 4; + c->post_bit_error.len = 4; + c->post_bit_count.len = 4; + c->block_error.len = 4; + c->block_count.len = 4; + + /* Signal is always available */ + c->strength.stat[0].scale = FE_SCALE_RELATIVE; + c->strength.stat[0].uvalue = 0; + + /* Put all of them at FE_SCALE_NOT_AVAILABLE */ + for (i = 0; i < 4; i++) { + c->cnr.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->block_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + } +} + +static int mb86a20s_get_stats(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc = 0, i; + u32 bit_error = 0, bit_count = 0; + u32 t_pre_bit_error = 0, t_pre_bit_count = 0; + u32 t_post_bit_error = 0, t_post_bit_count = 0; + u32 block_error = 0, block_count = 0; + u32 t_block_error = 0, t_block_count = 0; + int active_layers = 0, pre_ber_layers = 0, post_ber_layers = 0; + int per_layers = 0; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + mb86a20s_get_main_CNR(fe); + + /* Get per-layer stats */ + mb86a20s_get_blk_error_layer_CNR(fe); + + for (i = 0; i < 3; i++) { + if (c->isdbt_layer_enabled & (1 << i)) { + /* Layer is active and has rc segments */ + active_layers++; + + /* Handle BER before vterbi */ + rc = mb86a20s_get_pre_ber(fe, i, + &bit_error, &bit_count); + if (rc >= 0) { + c->pre_bit_error.stat[1 + i].scale = FE_SCALE_COUNTER; + c->pre_bit_error.stat[1 + i].uvalue += bit_error; + c->pre_bit_count.stat[1 + i].scale = FE_SCALE_COUNTER; + c->pre_bit_count.stat[1 + i].uvalue += bit_count; + } else if (rc != -EBUSY) { + /* + * If an I/O error happened, + * measures are now unavailable + */ + c->pre_bit_error.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_count.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + dev_err(&state->i2c->dev, + "%s: Can't get BER for layer %c (error %d).\n", + __func__, 'A' + i, rc); } + if (c->block_error.stat[1 + i].scale != FE_SCALE_NOT_AVAILABLE) + pre_ber_layers++; + + /* Handle BER post vterbi */ + rc = mb86a20s_get_post_ber(fe, i, + &bit_error, &bit_count); + if (rc >= 0) { + c->post_bit_error.stat[1 + i].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[1 + i].uvalue += bit_error; + c->post_bit_count.stat[1 + i].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[1 + i].uvalue += bit_count; + } else if (rc != -EBUSY) { + /* + * If an I/O error happened, + * measures are now unavailable + */ + c->post_bit_error.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + dev_err(&state->i2c->dev, + "%s: Can't get BER for layer %c (error %d).\n", + __func__, 'A' + i, rc); + } + if (c->block_error.stat[1 + i].scale != FE_SCALE_NOT_AVAILABLE) + post_ber_layers++; + + /* Handle Block errors for PER/UCB reports */ + rc = mb86a20s_get_blk_error(fe, i, + &block_error, + &block_count); + if (rc >= 0) { + c->block_error.stat[1 + i].scale = FE_SCALE_COUNTER; + c->block_error.stat[1 + i].uvalue += block_error; + c->block_count.stat[1 + i].scale = FE_SCALE_COUNTER; + c->block_count.stat[1 + i].uvalue += block_count; + } else if (rc != -EBUSY) { + /* + * If an I/O error happened, + * measures are now unavailable + */ + c->block_error.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + dev_err(&state->i2c->dev, + "%s: Can't get PER for layer %c (error %d).\n", + __func__, 'A' + i, rc); + + } + if (c->block_error.stat[1 + i].scale != FE_SCALE_NOT_AVAILABLE) + per_layers++; + + /* Update total preBER */ + t_pre_bit_error += c->pre_bit_error.stat[1 + i].uvalue; + t_pre_bit_count += c->pre_bit_count.stat[1 + i].uvalue; + + /* Update total postBER */ + t_post_bit_error += c->post_bit_error.stat[1 + i].uvalue; + t_post_bit_count += c->post_bit_count.stat[1 + i].uvalue; + + /* Update total PER */ + t_block_error += c->block_error.stat[1 + i].uvalue; + t_block_count += c->block_count.stat[1 + i].uvalue; } } + /* + * Start showing global count if at least one error count is + * available. + */ + if (pre_ber_layers) { + /* + * At least one per-layer BER measure was read. We can now + * calculate the total BER + * + * Total Bit Error/Count is calculated as the sum of the + * bit errors on all active layers. + */ + c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_error.stat[0].uvalue = t_pre_bit_error; + c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_count.stat[0].uvalue = t_pre_bit_count; + } else { + c->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; + } + + /* + * Start showing global count if at least one error count is + * available. + */ + if (post_ber_layers) { + /* + * At least one per-layer BER measure was read. We can now + * calculate the total BER + * + * Total Bit Error/Count is calculated as the sum of the + * bit errors on all active layers. + */ + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue = t_post_bit_error; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].uvalue = t_post_bit_count; + } else { + c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + } + + if (per_layers) { + /* + * At least one per-layer UCB measure was read. We can now + * calculate the total UCB + * + * Total block Error/Count is calculated as the sum of the + * block errors on all active layers. + */ + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_error.stat[0].uvalue = t_block_error; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].uvalue = t_block_count; + } else { + c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + } + + return rc; +} + +/* + * The functions below are called via DVB callbacks, so they need to + * properly use the I2C gate control + */ + +static int mb86a20s_initfe(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int rc; + u8 regD5 = 1; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + /* Initialize the frontend */ + rc = mb86a20s_writeregdata(state, mb86a20s_init); + if (rc < 0) + goto err; + + if (!state->config->is_serial) { + regD5 &= ~1; + + rc = mb86a20s_writereg(state, 0x50, 0xd5); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x51, regD5); + if (rc < 0) + goto err; + } + +err: if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); + if (rc < 0) { + state->need_init = true; + dev_info(&state->i2c->dev, + "mb86a20s: Init failed. Will try again later\n"); + } else { + state->need_init = false; + dev_dbg(&state->i2c->dev, "Initialization succeeded.\n"); + } + return rc; +} + +static int mb86a20s_set_frontend(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int rc; +#if 0 + /* + * FIXME: Properly implement the set frontend properties + */ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; +#endif + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* + * Gate should already be opened, but it doesn't hurt to + * double-check + */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + fe->ops.tuner_ops.set_params(fe); + + /* + * Make it more reliable: if, for some reason, the initial + * device initialization doesn't happen, initialize it when + * a SBTVD parameters are adjusted. + * + * Unfortunately, due to a hard to track bug at tda829x/tda18271, + * the agc callback logic is not called during DVB attach time, + * causing mb86a20s to not be initialized with Kworld SBTVD. + * So, this hack is needed, in order to make Kworld SBTVD to work. + */ + if (state->need_init) + mb86a20s_initfe(fe); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception); + mb86a20s_reset_counters(fe); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + return rc; +} + +static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe, + fe_status_t *status) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + /* Get lock */ + rc = mb86a20s_read_status(fe, status); + if (!(*status & FE_HAS_LOCK)) { + mb86a20s_stats_not_ready(fe); + mb86a20s_reset_frontend_cache(fe); + } + if (rc < 0) { + dev_err(&state->i2c->dev, + "%s: Can't read frontend lock status\n", __func__); + goto error; + } + + /* Get signal strength */ + rc = mb86a20s_read_signal_strength(fe); + if (rc < 0) { + dev_err(&state->i2c->dev, + "%s: Can't reset VBER registers.\n", __func__); + mb86a20s_stats_not_ready(fe); + mb86a20s_reset_frontend_cache(fe); + + rc = 0; /* Status is OK */ + goto error; + } + /* Fill signal strength */ + c->strength.stat[0].uvalue = rc; + + if (*status & FE_HAS_LOCK) { + /* Get TMCC info*/ + rc = mb86a20s_get_frontend(fe); + if (rc < 0) { + dev_err(&state->i2c->dev, + "%s: Can't get FE TMCC data.\n", __func__); + rc = 0; /* Status is OK */ + goto error; + } + + /* Get statistics */ + rc = mb86a20s_get_stats(fe); + if (rc < 0 && rc != -EBUSY) { + dev_err(&state->i2c->dev, + "%s: Can't get FE statistics.\n", __func__); + rc = 0; + goto error; + } + rc = 0; /* Don't return EBUSY to userspace */ + } + goto ok; + +error: + mb86a20s_stats_not_ready(fe); + +ok: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + return rc; +} + +static int mb86a20s_read_signal_strength_from_cache(struct dvb_frontend *fe, + u16 *strength) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + + *strength = c->strength.stat[0].uvalue; + return 0; } +static int mb86a20s_get_frontend_dummy(struct dvb_frontend *fe) +{ + /* + * get_frontend is now handled together with other stats + * retrival, when read_status() is called, as some statistics + * will depend on the layers detection. + */ + return 0; +}; + static int mb86a20s_tune(struct dvb_frontend *fe, bool re_tune, unsigned int mode_flags, unsigned int *delay, fe_status_t *status) { + struct mb86a20s_state *state = fe->demodulator_priv; int rc = 0; - dprintk("\n"); + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); if (re_tune) rc = mb86a20s_set_frontend(fe); if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) - mb86a20s_read_status(fe, status); + mb86a20s_read_status_and_stats(fe, status); return rc; } @@ -619,7 +1936,7 @@ static void mb86a20s_release(struct dvb_frontend *fe) { struct mb86a20s_state *state = fe->demodulator_priv; - dprintk("\n"); + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); kfree(state); } @@ -629,15 +1946,16 @@ static struct dvb_frontend_ops mb86a20s_ops; struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config, struct i2c_adapter *i2c) { + struct mb86a20s_state *state; u8 rev; - /* allocate memory for the internal state */ - struct mb86a20s_state *state = - kzalloc(sizeof(struct mb86a20s_state), GFP_KERNEL); + dev_dbg(&i2c->dev, "%s called.\n", __func__); - dprintk("\n"); + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct mb86a20s_state), GFP_KERNEL); if (state == NULL) { - rc("Unable to kzalloc\n"); + dev_err(&i2c->dev, + "%s: unable to allocate memory for state\n", __func__); goto error; } @@ -654,9 +1972,11 @@ struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config, rev = mb86a20s_readreg(state, 0); if (rev == 0x13) { - printk(KERN_INFO "Detected a Fujitsu mb86a20s frontend\n"); + dev_info(&i2c->dev, + "Detected a Fujitsu mb86a20s frontend\n"); } else { - printk(KERN_ERR "Frontend revision %d is unknown - aborting.\n", + dev_dbg(&i2c->dev, + "Frontend revision %d is unknown - aborting.\n", rev); goto error; } @@ -690,9 +2010,9 @@ static struct dvb_frontend_ops mb86a20s_ops = { .init = mb86a20s_initfe, .set_frontend = mb86a20s_set_frontend, - .get_frontend = mb86a20s_get_frontend, - .read_status = mb86a20s_read_status, - .read_signal_strength = mb86a20s_read_signal_strength, + .get_frontend = mb86a20s_get_frontend_dummy, + .read_status = mb86a20s_read_status_and_stats, + .read_signal_strength = mb86a20s_read_signal_strength_from_cache, .tune = mb86a20s_tune, }; diff --git a/drivers/media/dvb-frontends/mt312.h b/drivers/media/dvb-frontends/mt312.h index 29e3bb5496b..5706621ad79 100644 --- a/drivers/media/dvb-frontends/mt312.h +++ b/drivers/media/dvb-frontends/mt312.h @@ -36,7 +36,7 @@ struct mt312_config { unsigned int voltage_inverted:1; }; -#if defined(CONFIG_DVB_MT312) || (defined(CONFIG_DVB_MT312_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_MT312) struct dvb_frontend *mt312_attach(const struct mt312_config *config, struct i2c_adapter *i2c); #else diff --git a/drivers/media/dvb-frontends/mt352.h b/drivers/media/dvb-frontends/mt352.h index ca2562d6f28..451d904e150 100644 --- a/drivers/media/dvb-frontends/mt352.h +++ b/drivers/media/dvb-frontends/mt352.h @@ -51,7 +51,7 @@ struct mt352_config int (*demod_init)(struct dvb_frontend* fe); }; -#if defined(CONFIG_DVB_MT352) || (defined(CONFIG_DVB_MT352_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_MT352) extern struct dvb_frontend* mt352_attach(const struct mt352_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/nxt200x.h b/drivers/media/dvb-frontends/nxt200x.h index f3c84583770..b518d545609 100644 --- a/drivers/media/dvb-frontends/nxt200x.h +++ b/drivers/media/dvb-frontends/nxt200x.h @@ -42,7 +42,7 @@ struct nxt200x_config int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); }; -#if defined(CONFIG_DVB_NXT200X) || (defined(CONFIG_DVB_NXT200X_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_NXT200X) extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/nxt6000.h b/drivers/media/dvb-frontends/nxt6000.h index 878eb38a075..b5867c2ae68 100644 --- a/drivers/media/dvb-frontends/nxt6000.h +++ b/drivers/media/dvb-frontends/nxt6000.h @@ -33,7 +33,7 @@ struct nxt6000_config u8 clock_inversion:1; }; -#if defined(CONFIG_DVB_NXT6000) || (defined(CONFIG_DVB_NXT6000_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_NXT6000) extern struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/or51132.h b/drivers/media/dvb-frontends/or51132.h index 1b8e04d973c..938958386cb 100644 --- a/drivers/media/dvb-frontends/or51132.h +++ b/drivers/media/dvb-frontends/or51132.h @@ -34,7 +34,7 @@ struct or51132_config int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); }; -#if defined(CONFIG_DVB_OR51132) || (defined(CONFIG_DVB_OR51132_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_OR51132) extern struct dvb_frontend* or51132_attach(const struct or51132_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c index c625b57b433..10cfc057916 100644 --- a/drivers/media/dvb-frontends/or51211.c +++ b/drivers/media/dvb-frontends/or51211.c @@ -22,6 +22,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__ + /* * This driver needs external firmware. Please use the command * "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to @@ -44,9 +46,7 @@ static int debug; #define dprintk(args...) \ - do { \ - if (debug) printk(KERN_DEBUG "or51211: " args); \ - } while (0) + do { if (debug) pr_debug(args); } while (0) static u8 run_buf[] = {0x7f,0x01}; static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC @@ -80,8 +80,7 @@ static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf, msg.buf = (u8 *)buf; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "or51211: i2c_writebytes error " - "(addr %02x, err == %i)\n", reg, err); + pr_warn("error (addr %02x, err == %i)\n", reg, err); return -EREMOTEIO; } @@ -98,8 +97,7 @@ static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len) msg.buf = buf; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "or51211: i2c_readbytes error " - "(addr %02x, err == %i)\n", reg, err); + pr_warn("error (addr %02x, err == %i)\n", reg, err); return -EREMOTEIO; } @@ -118,11 +116,11 @@ static int or51211_load_firmware (struct dvb_frontend* fe, /* Get eprom data */ tudata[0] = 17; if (i2c_writebytes(state,0x50,tudata,1)) { - printk(KERN_WARNING "or51211:load_firmware error eprom addr\n"); + pr_warn("error eprom addr\n"); return -1; } if (i2c_readbytes(state,0x50,&tudata[145],192)) { - printk(KERN_WARNING "or51211: load_firmware error eprom\n"); + pr_warn("error eprom\n"); return -1; } @@ -136,32 +134,32 @@ static int or51211_load_firmware (struct dvb_frontend* fe, state->config->reset(fe); if (i2c_writebytes(state,state->config->demod_address,tudata,585)) { - printk(KERN_WARNING "or51211: load_firmware error 1\n"); + pr_warn("error 1\n"); return -1; } msleep(1); if (i2c_writebytes(state,state->config->demod_address, &fw->data[393],8125)) { - printk(KERN_WARNING "or51211: load_firmware error 2\n"); + pr_warn("error 2\n"); return -1; } msleep(1); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: load_firmware error 3\n"); + pr_warn("error 3\n"); return -1; } /* Wait at least 5 msec */ msleep(10); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: load_firmware error 4\n"); + pr_warn("error 4\n"); return -1; } msleep(10); - printk("or51211: Done.\n"); + pr_info("Done.\n"); return 0; }; @@ -173,14 +171,14 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode) state->config->setmode(fe, mode); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: setmode error 1\n"); + pr_warn("error 1\n"); return -1; } /* Wait at least 5 msec */ msleep(10); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { - printk(KERN_WARNING "or51211: setmode error 2\n"); + pr_warn("error 2\n"); return -1; } @@ -196,7 +194,7 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode) * normal +/-150kHz Carrier acquisition range */ if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) { - printk(KERN_WARNING "or51211: setmode error 3\n"); + pr_warn("error 3\n"); return -1; } @@ -206,14 +204,14 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode) rec_buf[3] = 0x00; msleep(20); if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) { - printk(KERN_WARNING "or51211: setmode error 5\n"); + pr_warn("error 5\n"); } msleep(3); if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) { - printk(KERN_WARNING "or51211: setmode error 6"); + pr_warn("error 6\n"); return -1; } - dprintk("setmode rec status %02x %02x\n",rec_buf[10],rec_buf[11]); + dprintk("rec status %02x %02x\n", rec_buf[10], rec_buf[11]); return 0; } @@ -248,15 +246,15 @@ static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status) /* Receiver Status */ if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { - printk(KERN_WARNING "or51132: read_status write error\n"); + pr_warn("write error\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { - printk(KERN_WARNING "or51132: read_status read error\n"); + pr_warn("read error\n"); return -1; } - dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]); + dprintk("%x %x\n", rec_buf[0], rec_buf[1]); if (rec_buf[0] & 0x01) { /* Receiver Lock */ *status |= FE_HAS_SIGNAL; @@ -306,20 +304,18 @@ static int or51211_read_snr(struct dvb_frontend* fe, u16* snr) snd_buf[2] = 0x04; if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { - printk(KERN_WARNING "%s: error writing snr reg\n", - __func__); + pr_warn("error writing snr reg\n"); return -1; } if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { - printk(KERN_WARNING "%s: read_status read error\n", - __func__); + pr_warn("read_status read error\n"); return -1; } state->snr = calculate_snr(rec_buf[0], 89599047); *snr = (state->snr) >> 16; - dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __func__, rec_buf[0], + dprintk("noise = 0x%02x, snr = %d.%02d dB\n", rec_buf[0], state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); return 0; @@ -375,25 +371,24 @@ static int or51211_init(struct dvb_frontend* fe) if (!state->initialized) { /* Request the firmware, this will block until it uploads */ - printk(KERN_INFO "or51211: Waiting for firmware upload " - "(%s)...\n", OR51211_DEFAULT_FIRMWARE); + pr_info("Waiting for firmware upload (%s)...\n", + OR51211_DEFAULT_FIRMWARE); ret = config->request_firmware(fe, &fw, OR51211_DEFAULT_FIRMWARE); - printk(KERN_INFO "or51211:Got Hotplug firmware\n"); + pr_info("Got Hotplug firmware\n"); if (ret) { - printk(KERN_WARNING "or51211: No firmware uploaded " - "(timeout or file not found?)\n"); + pr_warn("No firmware uploaded " + "(timeout or file not found?)\n"); return ret; } ret = or51211_load_firmware(fe, fw); release_firmware(fw); if (ret) { - printk(KERN_WARNING "or51211: Writing firmware to " - "device failed!\n"); + pr_warn("Writing firmware to device failed!\n"); return ret; } - printk(KERN_INFO "or51211: Firmware upload complete.\n"); + pr_info("Firmware upload complete.\n"); /* Set operation mode in Receiver 1 register; * type 1: @@ -406,7 +401,7 @@ static int or51211_init(struct dvb_frontend* fe) */ if (i2c_writebytes(state,state->config->demod_address, cmd_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error 5\n"); + pr_warn("Load DVR Error 5\n"); return -1; } @@ -419,13 +414,13 @@ static int or51211_init(struct dvb_frontend* fe) msleep(30); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error A\n"); + pr_warn("Load DVR Error A\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[10],2)) { - printk(KERN_WARNING "or51211: Load DVR Error B\n"); + pr_warn("Load DVR Error B\n"); return -1; } @@ -436,13 +431,13 @@ static int or51211_init(struct dvb_frontend* fe) msleep(20); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error C\n"); + pr_warn("Load DVR Error C\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[12],2)) { - printk(KERN_WARNING "or51211: Load DVR Error D\n"); + pr_warn("Load DVR Error D\n"); return -1; } @@ -454,16 +449,14 @@ static int or51211_init(struct dvb_frontend* fe) get_ver_buf[4] = i+1; if (i2c_writebytes(state,state->config->demod_address, get_ver_buf,5)) { - printk(KERN_WARNING "or51211:Load DVR Error 6" - " - %d\n",i); + pr_warn("Load DVR Error 6 - %d\n", i); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[i*2],2)) { - printk(KERN_WARNING "or51211:Load DVR Error 7" - " - %d\n",i); + pr_warn("Load DVR Error 7 - %d\n", i); return -1; } /* If we didn't receive the right index, try again */ @@ -471,15 +464,11 @@ static int or51211_init(struct dvb_frontend* fe) i--; } } - dprintk("read_fwbits %x %x %x %x %x %x %x %x %x %x\n", - rec_buf[0], rec_buf[1], rec_buf[2], rec_buf[3], - rec_buf[4], rec_buf[5], rec_buf[6], rec_buf[7], - rec_buf[8], rec_buf[9]); + dprintk("read_fwbits %10ph\n", rec_buf); - printk(KERN_INFO "or51211: ver TU%02x%02x%02x VSB mode %02x" - " Status %02x\n", - rec_buf[2], rec_buf[4],rec_buf[6], - rec_buf[12],rec_buf[10]); + pr_info("ver TU%02x%02x%02x VSB mode %02x Status %02x\n", + rec_buf[2], rec_buf[4], rec_buf[6], rec_buf[12], + rec_buf[10]); rec_buf[0] = 0x04; rec_buf[1] = 0x00; @@ -488,13 +477,13 @@ static int or51211_init(struct dvb_frontend* fe) msleep(20); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { - printk(KERN_WARNING "or51211: Load DVR Error 8\n"); + pr_warn("Load DVR Error 8\n"); return -1; } msleep(20); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[8],2)) { - printk(KERN_WARNING "or51211: Load DVR Error 9\n"); + pr_warn("Load DVR Error 9\n"); return -1; } state->initialized = 1; diff --git a/drivers/media/dvb-frontends/or51211.h b/drivers/media/dvb-frontends/or51211.h index 3ce0508b898..9a8ae936b62 100644 --- a/drivers/media/dvb-frontends/or51211.h +++ b/drivers/media/dvb-frontends/or51211.h @@ -37,7 +37,7 @@ struct or51211_config void (*sleep)(struct dvb_frontend * fe); }; -#if defined(CONFIG_DVB_OR51211) || (defined(CONFIG_DVB_OR51211_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_OR51211) extern struct dvb_frontend* or51211_attach(const struct or51211_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/s5h1420.h b/drivers/media/dvb-frontends/s5h1420.h index ff308136d86..210049b5cf3 100644 --- a/drivers/media/dvb-frontends/s5h1420.h +++ b/drivers/media/dvb-frontends/s5h1420.h @@ -40,7 +40,7 @@ struct s5h1420_config u8 serial_mpeg:1; }; -#if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_S5H1420) extern struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config, struct i2c_adapter *i2c); extern struct i2c_adapter *s5h1420_get_tuner_i2c_adapter(struct dvb_frontend *fe); diff --git a/drivers/media/dvb-frontends/sp8870.h b/drivers/media/dvb-frontends/sp8870.h index a764a793c7d..065ec67d4e3 100644 --- a/drivers/media/dvb-frontends/sp8870.h +++ b/drivers/media/dvb-frontends/sp8870.h @@ -35,7 +35,7 @@ struct sp8870_config int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); }; -#if defined(CONFIG_DVB_SP8870) || (defined(CONFIG_DVB_SP8870_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_SP8870) extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/sp887x.h b/drivers/media/dvb-frontends/sp887x.h index 04eff6e0eef..2cdc4e8bc9c 100644 --- a/drivers/media/dvb-frontends/sp887x.h +++ b/drivers/media/dvb-frontends/sp887x.h @@ -17,7 +17,7 @@ struct sp887x_config int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); }; -#if defined(CONFIG_DVB_SP887X) || (defined(CONFIG_DVB_SP887X_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_SP887X) extern struct dvb_frontend* sp887x_attach(const struct sp887x_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/stb0899_drv.h b/drivers/media/dvb-frontends/stb0899_drv.h index 98b200ce0c3..8d26ff6eb1d 100644 --- a/drivers/media/dvb-frontends/stb0899_drv.h +++ b/drivers/media/dvb-frontends/stb0899_drv.h @@ -142,7 +142,7 @@ struct stb0899_config { int (*tuner_set_rfsiggain)(struct dvb_frontend *fe, u32 rf_gain); }; -#if defined(CONFIG_DVB_STB0899) || (defined(CONFIG_DVB_STB0899_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_STB0899) extern struct dvb_frontend *stb0899_attach(struct stb0899_config *config, struct i2c_adapter *i2c); diff --git a/drivers/media/dvb-frontends/stb6100.h b/drivers/media/dvb-frontends/stb6100.h index 2ab096614b3..3a1e40f3b8b 100644 --- a/drivers/media/dvb-frontends/stb6100.h +++ b/drivers/media/dvb-frontends/stb6100.h @@ -94,7 +94,7 @@ struct stb6100_state { u32 reference; }; -#if defined(CONFIG_DVB_STB6100) || (defined(CONFIG_DVB_STB6100_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_STB6100) extern struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe, const struct stb6100_config *config, diff --git a/drivers/media/dvb-frontends/stv0297.h b/drivers/media/dvb-frontends/stv0297.h index 3f8f9468f38..c8ff3639ce0 100644 --- a/drivers/media/dvb-frontends/stv0297.h +++ b/drivers/media/dvb-frontends/stv0297.h @@ -42,7 +42,7 @@ struct stv0297_config u8 stop_during_read:1; }; -#if defined(CONFIG_DVB_STV0297) || (defined(CONFIG_DVB_STV0297_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_STV0297) extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/stv0299.c b/drivers/media/dvb-frontends/stv0299.c index 92a6075cd82..b57ecf42e75 100644 --- a/drivers/media/dvb-frontends/stv0299.c +++ b/drivers/media/dvb-frontends/stv0299.c @@ -420,7 +420,7 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long do_gettimeofday (&nexttime); if (debug_legacy_dish_switch) - memcpy (&tv[0], &nexttime, sizeof (struct timeval)); + tv[0] = nexttime; stv0299_writeregI (state, 0x0c, reg0x0c | 0x50); /* set LNB to 18V */ dvb_frontend_sleep_until(&nexttime, 32000); diff --git a/drivers/media/dvb-frontends/stv0299.h b/drivers/media/dvb-frontends/stv0299.h index ba219b767a6..06f70fc8327 100644 --- a/drivers/media/dvb-frontends/stv0299.h +++ b/drivers/media/dvb-frontends/stv0299.h @@ -95,7 +95,7 @@ struct stv0299_config int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); }; -#if defined(CONFIG_DVB_STV0299) || (defined(CONFIG_DVB_STV0299_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_STV0299) extern struct dvb_frontend *stv0299_attach(const struct stv0299_config *config, struct i2c_adapter *i2c); #else diff --git a/drivers/media/dvb-frontends/stv0900_core.c b/drivers/media/dvb-frontends/stv0900_core.c index b551ca350e0..e5a87b57d85 100644 --- a/drivers/media/dvb-frontends/stv0900_core.c +++ b/drivers/media/dvb-frontends/stv0900_core.c @@ -524,11 +524,8 @@ void stv0900_set_tuner(struct dvb_frontend *fe, u32 frequency, struct dvb_frontend_ops *frontend_ops = NULL; struct dvb_tuner_ops *tuner_ops = NULL; - if (&fe->ops) - frontend_ops = &fe->ops; - - if (&frontend_ops->tuner_ops) - tuner_ops = &frontend_ops->tuner_ops; + frontend_ops = &fe->ops; + tuner_ops = &frontend_ops->tuner_ops; if (tuner_ops->set_frequency) { if ((tuner_ops->set_frequency(fe, frequency)) < 0) @@ -552,11 +549,8 @@ void stv0900_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth) struct dvb_frontend_ops *frontend_ops = NULL; struct dvb_tuner_ops *tuner_ops = NULL; - if (&fe->ops) - frontend_ops = &fe->ops; - - if (&frontend_ops->tuner_ops) - tuner_ops = &frontend_ops->tuner_ops; + frontend_ops = &fe->ops; + tuner_ops = &frontend_ops->tuner_ops; if (tuner_ops->set_bandwidth) { if ((tuner_ops->set_bandwidth(fe, bandwidth)) < 0) @@ -1558,6 +1552,27 @@ static int stv0900_status(struct stv0900_internal *intp, return locked; } +static int stv0900_set_mis(struct stv0900_internal *intp, + enum fe_stv0900_demod_num demod, int mis) +{ + enum fe_stv0900_error error = STV0900_NO_ERROR; + + dprintk("%s\n", __func__); + + if (mis < 0 || mis > 255) { + dprintk("Disable MIS filtering\n"); + stv0900_write_bits(intp, FILTER_EN, 0); + } else { + dprintk("Enable MIS filtering - %d\n", mis); + stv0900_write_bits(intp, FILTER_EN, 1); + stv0900_write_reg(intp, ISIENTRY, mis); + stv0900_write_reg(intp, ISIBITENA, 0xff); + } + + return error; +} + + static enum dvbfe_search stv0900_search(struct dvb_frontend *fe) { struct stv0900_state *state = fe->demodulator_priv; @@ -1578,6 +1593,8 @@ static enum dvbfe_search stv0900_search(struct dvb_frontend *fe) if (state->config->set_ts_params) state->config->set_ts_params(fe, 0); + stv0900_set_mis(intp, demod, c->stream_id); + p_result.locked = FALSE; p_search.path = demod; p_search.frequency = c->frequency; @@ -1935,6 +1952,9 @@ struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, if (err_stv0900) goto error; + if (state->internal->chip_id >= 0x30) + state->frontend.ops.info.caps |= FE_CAN_MULTISTREAM; + break; default: goto error; diff --git a/drivers/media/dvb-frontends/stv0900_reg.h b/drivers/media/dvb-frontends/stv0900_reg.h index 731afe93a82..511ed2a2d98 100644 --- a/drivers/media/dvb-frontends/stv0900_reg.h +++ b/drivers/media/dvb-frontends/stv0900_reg.h @@ -3446,8 +3446,11 @@ extern s32 shiftx(s32 x, int demod, s32 shift); #define R0900_P1_PDELCTRL1 0xf550 #define PDELCTRL1 REGx(R0900_P1_PDELCTRL1) #define F0900_P1_INV_MISMASK 0xf5500080 +#define INV_MISMASK FLDx(F0900_P1_INV_MISMASK) #define F0900_P1_FILTER_EN 0xf5500020 +#define FILTER_EN FLDx(F0900_P1_FILTER_EN) #define F0900_P1_EN_MIS00 0xf5500002 +#define EN_MIS00 FLDx(F0900_P1_EN_MIS00) #define F0900_P1_ALGOSWRST 0xf5500001 #define ALGOSWRST FLDx(F0900_P1_ALGOSWRST) diff --git a/drivers/media/dvb-frontends/stv0900_sw.c b/drivers/media/dvb-frontends/stv0900_sw.c index 4af20780fb9..0a40edfad73 100644 --- a/drivers/media/dvb-frontends/stv0900_sw.c +++ b/drivers/media/dvb-frontends/stv0900_sw.c @@ -1167,11 +1167,8 @@ static u32 stv0900_get_tuner_freq(struct dvb_frontend *fe) struct dvb_tuner_ops *tuner_ops = NULL; u32 freq = 0; - if (&fe->ops) - frontend_ops = &fe->ops; - - if (&frontend_ops->tuner_ops) - tuner_ops = &frontend_ops->tuner_ops; + frontend_ops = &fe->ops; + tuner_ops = &frontend_ops->tuner_ops; if (tuner_ops->get_frequency) { if ((tuner_ops->get_frequency(fe, &freq)) < 0) diff --git a/drivers/media/dvb-frontends/stv090x.c b/drivers/media/dvb-frontends/stv090x.c index 13caec01390..f36eeefb76a 100644 --- a/drivers/media/dvb-frontends/stv090x.c +++ b/drivers/media/dvb-frontends/stv090x.c @@ -4267,7 +4267,7 @@ err: return -1; } -static int stv090x_set_tspath(struct stv090x_state *state) +static int stv0900_set_tspath(struct stv090x_state *state) { u32 reg; @@ -4538,6 +4538,121 @@ err: return -1; } +static int stv0903_set_tspath(struct stv090x_state *state) +{ + u32 reg; + + if (state->internal->dev_ver >= 0x20) { + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + stv090x_write_reg(state, STV090x_TSGENERAL, 0x00); + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + stv090x_write_reg(state, STV090x_TSGENERAL, 0x0c); + break; + } + } else { + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x10); + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + default: + stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x14); + break; + } + } + + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_DVBCI: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_SERIAL_PUNCTURED: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + case STV090x_TSMODE_SERIAL_CONTINUOUS: + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01); + STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + break; + + default: + break; + } + + if (state->config->ts1_clk > 0) { + u32 speed; + + switch (state->config->ts1_mode) { + case STV090x_TSMODE_PARALLEL_PUNCTURED: + case STV090x_TSMODE_DVBCI: + default: + speed = state->internal->mclk / + (state->config->ts1_clk / 4); + if (speed < 0x08) + speed = 0x08; + if (speed > 0xFF) + speed = 0xFF; + break; + case STV090x_TSMODE_SERIAL_PUNCTURED: + case STV090x_TSMODE_SERIAL_CONTINUOUS: + speed = state->internal->mclk / + (state->config->ts1_clk / 32); + if (speed < 0x20) + speed = 0x20; + if (speed > 0xFF) + speed = 0xFF; + break; + } + reg = stv090x_read_reg(state, STV090x_P1_TSCFGM); + STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3); + if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0) + goto err; + if (stv090x_write_reg(state, STV090x_P1_TSSPEED, speed) < 0) + goto err; + } + + reg = stv090x_read_reg(state, STV090x_P1_TSCFGH); + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x00); + if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0) + goto err; + + return 0; +err: + dprintk(FE_ERROR, 1, "I/O error"); + return -1; +} + static int stv090x_init(struct dvb_frontend *fe) { struct stv090x_state *state = fe->demodulator_priv; @@ -4600,8 +4715,13 @@ static int stv090x_init(struct dvb_frontend *fe) if (stv090x_i2c_gate_ctrl(state, 0) < 0) goto err; - if (stv090x_set_tspath(state) < 0) - goto err; + if (state->device == STV0900) { + if (stv0900_set_tspath(state) < 0) + goto err; + } else { + if (stv0903_set_tspath(state) < 0) + goto err; + } return 0; @@ -4642,23 +4762,26 @@ static int stv090x_setup(struct dvb_frontend *fe) /* Stop Demod */ if (stv090x_write_reg(state, STV090x_P1_DMDISTATE, 0x5c) < 0) goto err; - if (stv090x_write_reg(state, STV090x_P2_DMDISTATE, 0x5c) < 0) - goto err; + if (state->device == STV0900) + if (stv090x_write_reg(state, STV090x_P2_DMDISTATE, 0x5c) < 0) + goto err; msleep(5); /* Set No Tuner Mode */ if (stv090x_write_reg(state, STV090x_P1_TNRCFG, 0x6c) < 0) goto err; - if (stv090x_write_reg(state, STV090x_P2_TNRCFG, 0x6c) < 0) - goto err; + if (state->device == STV0900) + if (stv090x_write_reg(state, STV090x_P2_TNRCFG, 0x6c) < 0) + goto err; /* I2C repeater OFF */ STV090x_SETFIELD_Px(reg, ENARPT_LEVEL_FIELD, config->repeater_level); if (stv090x_write_reg(state, STV090x_P1_I2CRPT, reg) < 0) goto err; - if (stv090x_write_reg(state, STV090x_P2_I2CRPT, reg) < 0) - goto err; + if (state->device == STV0900) + if (stv090x_write_reg(state, STV090x_P2_I2CRPT, reg) < 0) + goto err; if (stv090x_write_reg(state, STV090x_NCOARSE, 0x13) < 0) /* set PLL divider */ goto err; diff --git a/drivers/media/dvb-frontends/stv090x.h b/drivers/media/dvb-frontends/stv090x.h index 29cdc2b7131..0bd6adcfee8 100644 --- a/drivers/media/dvb-frontends/stv090x.h +++ b/drivers/media/dvb-frontends/stv090x.h @@ -103,7 +103,7 @@ struct stv090x_config { void (*tuner_i2c_lock) (struct dvb_frontend *fe, int lock); }; -#if defined(CONFIG_DVB_STV090x) || (defined(CONFIG_DVB_STV090x_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_STV090x) extern struct dvb_frontend *stv090x_attach(const struct stv090x_config *config, struct i2c_adapter *i2c, diff --git a/drivers/media/dvb-frontends/stv6110x.h b/drivers/media/dvb-frontends/stv6110x.h index 47516753929..bc4766db29c 100644 --- a/drivers/media/dvb-frontends/stv6110x.h +++ b/drivers/media/dvb-frontends/stv6110x.h @@ -53,7 +53,7 @@ struct stv6110x_devctl { }; -#if defined(CONFIG_DVB_STV6110x) || (defined(CONFIG_DVB_STV6110x_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_STV6110x) extern struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe, const struct stv6110x_config *config, diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h index 04d19418bf2..e404b6e4480 100644 --- a/drivers/media/dvb-frontends/tda1002x.h +++ b/drivers/media/dvb-frontends/tda1002x.h @@ -57,7 +57,7 @@ struct tda10023_config { u16 deltaf; }; -#if defined(CONFIG_DVB_TDA10021) || (defined(CONFIG_DVB_TDA10021_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TDA10021) extern struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, struct i2c_adapter* i2c, u8 pwm); #else @@ -69,8 +69,7 @@ static inline struct dvb_frontend* tda10021_attach(const struct tda1002x_config* } #endif // CONFIG_DVB_TDA10021 -#if defined(CONFIG_DVB_TDA10023) || \ - (defined(CONFIG_DVB_TDA10023_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TDA10023) extern struct dvb_frontend *tda10023_attach( const struct tda10023_config *config, struct i2c_adapter *i2c, u8 pwm); diff --git a/drivers/media/dvb-frontends/tda1004x.h b/drivers/media/dvb-frontends/tda1004x.h index 4e27ffb0f14..dd283fbb61c 100644 --- a/drivers/media/dvb-frontends/tda1004x.h +++ b/drivers/media/dvb-frontends/tda1004x.h @@ -117,7 +117,7 @@ struct tda1004x_state { enum tda1004x_demod demod_type; }; -#if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TDA1004X) extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c); diff --git a/drivers/media/dvb-frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c index 16a4bc54dbe..2521f7e2301 100644 --- a/drivers/media/dvb-frontends/tda10071.c +++ b/drivers/media/dvb-frontends/tda10071.c @@ -30,7 +30,7 @@ static int tda10071_wr_regs(struct tda10071_priv *priv, u8 reg, u8 *val, u8 buf[len+1]; struct i2c_msg msg[1] = { { - .addr = priv->cfg.i2c_address, + .addr = priv->cfg.demod_i2c_addr, .flags = 0, .len = sizeof(buf), .buf = buf, @@ -59,12 +59,12 @@ static int tda10071_rd_regs(struct tda10071_priv *priv, u8 reg, u8 *val, u8 buf[len]; struct i2c_msg msg[2] = { { - .addr = priv->cfg.i2c_address, + .addr = priv->cfg.demod_i2c_addr, .flags = 0, .len = 1, .buf = ®, }, { - .addr = priv->cfg.i2c_address, + .addr = priv->cfg.demod_i2c_addr, .flags = I2C_M_RD, .len = sizeof(buf), .buf = buf, @@ -1064,7 +1064,7 @@ static int tda10071_init(struct dvb_frontend *fe) cmd.args[2] = 0x00; cmd.args[3] = 0x00; cmd.args[4] = 0x00; - cmd.args[5] = 0x14; + cmd.args[5] = (priv->cfg.tuner_i2c_addr) ? priv->cfg.tuner_i2c_addr : 0x14; cmd.args[6] = 0x00; cmd.args[7] = 0x03; cmd.args[8] = 0x02; @@ -1202,6 +1202,20 @@ struct dvb_frontend *tda10071_attach(const struct tda10071_config *config, goto error; } + /* make sure demod i2c address is specified */ + if (!config->demod_i2c_addr) { + dev_dbg(&i2c->dev, "%s: invalid demod i2c address!\n", __func__); + ret = -EINVAL; + goto error; + } + + /* make sure tuner i2c address is specified */ + if (!config->tuner_i2c_addr) { + dev_dbg(&i2c->dev, "%s: invalid tuner i2c address!\n", __func__); + ret = -EINVAL; + goto error; + } + /* setup the priv */ priv->i2c = i2c; memcpy(&priv->cfg, config, sizeof(struct tda10071_config)); diff --git a/drivers/media/dvb-frontends/tda10071.h b/drivers/media/dvb-frontends/tda10071.h index 21163c4b555..bff1c38df80 100644 --- a/drivers/media/dvb-frontends/tda10071.h +++ b/drivers/media/dvb-frontends/tda10071.h @@ -28,7 +28,13 @@ struct tda10071_config { * Default: none, must set * Values: 0x55, */ - u8 i2c_address; + u8 demod_i2c_addr; + + /* Tuner I2C address. + * Default: none, must set + * Values: 0x14, 0x54, ... + */ + u8 tuner_i2c_addr; /* Max bytes I2C provider can write at once. * Note: Buffer is taken from the stack currently! diff --git a/drivers/media/dvb-frontends/tda10086.h b/drivers/media/dvb-frontends/tda10086.h index 61148c558d8..458fe91c1b8 100644 --- a/drivers/media/dvb-frontends/tda10086.h +++ b/drivers/media/dvb-frontends/tda10086.h @@ -46,7 +46,7 @@ struct tda10086_config enum tda10086_xtal xtal_freq; }; -#if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TDA10086) extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/tda665x.h b/drivers/media/dvb-frontends/tda665x.h index ec7927aa75a..03a0da6d5cf 100644 --- a/drivers/media/dvb-frontends/tda665x.h +++ b/drivers/media/dvb-frontends/tda665x.h @@ -31,7 +31,7 @@ struct tda665x_config { u32 ref_divider; }; -#if defined(CONFIG_DVB_TDA665x) || (defined(CONFIG_DVB_TDA665x_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TDA665x) extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, const struct tda665x_config *config, diff --git a/drivers/media/dvb-frontends/tda8083.h b/drivers/media/dvb-frontends/tda8083.h index 5a03c14a10e..de6b1860dfd 100644 --- a/drivers/media/dvb-frontends/tda8083.h +++ b/drivers/media/dvb-frontends/tda8083.h @@ -35,7 +35,7 @@ struct tda8083_config u8 demod_address; }; -#if defined(CONFIG_DVB_TDA8083) || (defined(CONFIG_DVB_TDA8083_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TDA8083) extern struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/tda8261.h b/drivers/media/dvb-frontends/tda8261.h index 006e45351b9..55cf4ffcbfd 100644 --- a/drivers/media/dvb-frontends/tda8261.h +++ b/drivers/media/dvb-frontends/tda8261.h @@ -34,7 +34,7 @@ struct tda8261_config { enum tda8261_step step_size; }; -#if defined(CONFIG_DVB_TDA8261) || (defined(CONFIG_DVB_TDA8261_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TDA8261) extern struct dvb_frontend *tda8261_attach(struct dvb_frontend *fe, const struct tda8261_config *config, diff --git a/drivers/media/dvb-frontends/tda8261_cfg.h b/drivers/media/dvb-frontends/tda8261_cfg.h index 1af1ee49b54..46710744173 100644 --- a/drivers/media/dvb-frontends/tda8261_cfg.h +++ b/drivers/media/dvb-frontends/tda8261_cfg.h @@ -78,7 +78,7 @@ static int tda8261_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) return err; } *bandwidth = t_state.bandwidth; + printk("%s: Bandwidth=%d\n", __func__, t_state.bandwidth); } - printk("%s: Bandwidth=%d\n", __func__, t_state.bandwidth); return 0; } diff --git a/drivers/media/dvb-frontends/tda826x.h b/drivers/media/dvb-frontends/tda826x.h index 89e97926ab2..5f0f20e7e4f 100644 --- a/drivers/media/dvb-frontends/tda826x.h +++ b/drivers/media/dvb-frontends/tda826x.h @@ -35,7 +35,7 @@ * @param has_loopthrough Set to 1 if the card has a loopthrough RF connector. * @return FE pointer on success, NULL on failure. */ -#if defined(CONFIG_DVB_TDA826X) || (defined(CONFIG_DVB_TDA826X_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TDA826X) extern struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, int has_loopthrough); diff --git a/drivers/media/dvb-frontends/ts2020.c b/drivers/media/dvb-frontends/ts2020.c new file mode 100644 index 00000000000..ad7ad857ab2 --- /dev/null +++ b/drivers/media/dvb-frontends/ts2020.c @@ -0,0 +1,373 @@ +/* + Montage Technology TS2020 - Silicon Tuner driver + Copyright (C) 2009-2012 Konstantin Dimitrov <kosio.dimitrov@gmail.com> + + Copyright (C) 2009-2012 TurboSight.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "dvb_frontend.h" +#include "ts2020.h" + +#define TS2020_XTAL_FREQ 27000 /* in kHz */ +#define FREQ_OFFSET_LOW_SYM_RATE 3000 + +struct ts2020_priv { + /* i2c details */ + int i2c_address; + struct i2c_adapter *i2c; + u8 clk_out_div; + u32 frequency; +}; + +static int ts2020_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int ts2020_writereg(struct dvb_frontend *fe, int reg, int data) +{ + struct ts2020_priv *priv = fe->tuner_priv; + u8 buf[] = { reg, data }; + struct i2c_msg msg[] = { + { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 2 + } + }; + int err; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + err = i2c_transfer(priv->i2c, msg, 1); + if (err != 1) { + printk(KERN_ERR + "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n", + __func__, err, reg, data); + return -EREMOTEIO; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return 0; +} + +static int ts2020_readreg(struct dvb_frontend *fe, u8 reg) +{ + struct ts2020_priv *priv = fe->tuner_priv; + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = priv->i2c_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = priv->i2c_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, msg, 2); + + if (ret != 2) { + printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", + __func__, reg, ret); + return ret; + } + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return b1[0]; +} + +static int ts2020_sleep(struct dvb_frontend *fe) +{ + struct ts2020_priv *priv = fe->tuner_priv; + int ret; + u8 buf[] = { 10, 0 }; + struct i2c_msg msg = { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + printk(KERN_ERR "%s: i2c error\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret == 1) ? 0 : ret; +} + +static int ts2020_init(struct dvb_frontend *fe) +{ + struct ts2020_priv *priv = fe->tuner_priv; + + ts2020_writereg(fe, 0x42, 0x73); + ts2020_writereg(fe, 0x05, priv->clk_out_div); + ts2020_writereg(fe, 0x20, 0x27); + ts2020_writereg(fe, 0x07, 0x02); + ts2020_writereg(fe, 0x11, 0xff); + ts2020_writereg(fe, 0x60, 0xf9); + ts2020_writereg(fe, 0x08, 0x01); + ts2020_writereg(fe, 0x00, 0x41); + + return 0; +} + +static int ts2020_tuner_gate_ctrl(struct dvb_frontend *fe, u8 offset) +{ + int ret; + ret = ts2020_writereg(fe, 0x51, 0x1f - offset); + ret |= ts2020_writereg(fe, 0x51, 0x1f); + ret |= ts2020_writereg(fe, 0x50, offset); + ret |= ts2020_writereg(fe, 0x50, 0x00); + msleep(20); + return ret; +} + +static int ts2020_set_tuner_rf(struct dvb_frontend *fe) +{ + int reg; + + reg = ts2020_readreg(fe, 0x3d); + reg &= 0x7f; + if (reg < 0x16) + reg = 0xa1; + else if (reg == 0x16) + reg = 0x99; + else + reg = 0xf9; + + ts2020_writereg(fe, 0x60, reg); + reg = ts2020_tuner_gate_ctrl(fe, 0x08); + + return reg; +} + +static int ts2020_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct ts2020_priv *priv = fe->tuner_priv; + int ret; + u32 frequency = c->frequency; + s32 offset_khz; + u32 symbol_rate = (c->symbol_rate / 1000); + u32 f3db, gdiv28; + u16 value, ndiv, lpf_coeff; + u8 lpf_mxdiv, mlpf_max, mlpf_min, nlpf; + u8 lo = 0x01, div4 = 0x0; + + /* Calculate frequency divider */ + if (frequency < 1060000) { + lo |= 0x10; + div4 = 0x1; + ndiv = (frequency * 14 * 4) / TS2020_XTAL_FREQ; + } else + ndiv = (frequency * 14 * 2) / TS2020_XTAL_FREQ; + ndiv = ndiv + ndiv % 2; + ndiv = ndiv - 1024; + + ret = ts2020_writereg(fe, 0x10, 0x80 | lo); + + /* Set frequency divider */ + ret |= ts2020_writereg(fe, 0x01, (ndiv >> 8) & 0xf); + ret |= ts2020_writereg(fe, 0x02, ndiv & 0xff); + + ret |= ts2020_writereg(fe, 0x03, 0x06); + ret |= ts2020_tuner_gate_ctrl(fe, 0x10); + if (ret < 0) + return -ENODEV; + + /* Tuner Frequency Range */ + ret = ts2020_writereg(fe, 0x10, lo); + + ret |= ts2020_tuner_gate_ctrl(fe, 0x08); + + /* Tuner RF */ + ret |= ts2020_set_tuner_rf(fe); + + gdiv28 = (TS2020_XTAL_FREQ / 1000 * 1694 + 500) / 1000; + ret |= ts2020_writereg(fe, 0x04, gdiv28 & 0xff); + ret |= ts2020_tuner_gate_ctrl(fe, 0x04); + if (ret < 0) + return -ENODEV; + + value = ts2020_readreg(fe, 0x26); + + f3db = (symbol_rate * 135) / 200 + 2000; + f3db += FREQ_OFFSET_LOW_SYM_RATE; + if (f3db < 7000) + f3db = 7000; + if (f3db > 40000) + f3db = 40000; + + gdiv28 = gdiv28 * 207 / (value * 2 + 151); + mlpf_max = gdiv28 * 135 / 100; + mlpf_min = gdiv28 * 78 / 100; + if (mlpf_max > 63) + mlpf_max = 63; + + lpf_coeff = 2766; + + nlpf = (f3db * gdiv28 * 2 / lpf_coeff / + (TS2020_XTAL_FREQ / 1000) + 1) / 2; + if (nlpf > 23) + nlpf = 23; + if (nlpf < 1) + nlpf = 1; + + lpf_mxdiv = (nlpf * (TS2020_XTAL_FREQ / 1000) + * lpf_coeff * 2 / f3db + 1) / 2; + + if (lpf_mxdiv < mlpf_min) { + nlpf++; + lpf_mxdiv = (nlpf * (TS2020_XTAL_FREQ / 1000) + * lpf_coeff * 2 / f3db + 1) / 2; + } + + if (lpf_mxdiv > mlpf_max) + lpf_mxdiv = mlpf_max; + + ret = ts2020_writereg(fe, 0x04, lpf_mxdiv); + ret |= ts2020_writereg(fe, 0x06, nlpf); + + ret |= ts2020_tuner_gate_ctrl(fe, 0x04); + + ret |= ts2020_tuner_gate_ctrl(fe, 0x01); + + msleep(80); + /* calculate offset assuming 96000kHz*/ + offset_khz = (ndiv - ndiv % 2 + 1024) * TS2020_XTAL_FREQ + / (6 + 8) / (div4 + 1) / 2; + + priv->frequency = offset_khz; + + return (ret < 0) ? -EINVAL : 0; +} + +static int ts2020_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct ts2020_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +/* read TS2020 signal strength */ +static int ts2020_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + u16 sig_reading, sig_strength; + u8 rfgain, bbgain; + + rfgain = ts2020_readreg(fe, 0x3d) & 0x1f; + bbgain = ts2020_readreg(fe, 0x21) & 0x1f; + + if (rfgain > 15) + rfgain = 15; + if (bbgain > 13) + bbgain = 13; + + sig_reading = rfgain * 2 + bbgain * 3; + + sig_strength = 40 + (64 - sig_reading) * 50 / 64 ; + + /* cook the value to be suitable for szap-s2 human readable output */ + *signal_strength = sig_strength * 1000; + + return 0; +} + +static struct dvb_tuner_ops ts2020_tuner_ops = { + .info = { + .name = "TS2020", + .frequency_min = 950000, + .frequency_max = 2150000 + }, + .init = ts2020_init, + .release = ts2020_release, + .sleep = ts2020_sleep, + .set_params = ts2020_set_params, + .get_frequency = ts2020_get_frequency, + .get_rf_strength = ts2020_read_signal_strength, +}; + +struct dvb_frontend *ts2020_attach(struct dvb_frontend *fe, + const struct ts2020_config *config, + struct i2c_adapter *i2c) +{ + struct ts2020_priv *priv = NULL; + u8 buf; + + priv = kzalloc(sizeof(struct ts2020_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_address = config->tuner_address; + priv->i2c = i2c; + priv->clk_out_div = config->clk_out_div; + fe->tuner_priv = priv; + + /* Wake Up the tuner */ + if ((0x03 & ts2020_readreg(fe, 0x00)) == 0x00) { + ts2020_writereg(fe, 0x00, 0x01); + msleep(2); + } + + ts2020_writereg(fe, 0x00, 0x03); + msleep(2); + + /* Check the tuner version */ + buf = ts2020_readreg(fe, 0x00); + if ((buf == 0x01) || (buf == 0x41) || (buf == 0x81)) + printk(KERN_INFO "%s: Find tuner TS2020!\n", __func__); + else { + printk(KERN_ERR "%s: Read tuner reg[0] = %d\n", __func__, buf); + kfree(priv); + return NULL; + } + + memcpy(&fe->ops.tuner_ops, &ts2020_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + return fe; +} +EXPORT_SYMBOL(ts2020_attach); + +MODULE_AUTHOR("Konstantin Dimitrov <kosio.dimitrov@gmail.com>"); +MODULE_DESCRIPTION("Montage Technology TS2020 - Silicon tuner driver module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb-frontends/ts2020.h b/drivers/media/dvb-frontends/ts2020.h new file mode 100644 index 00000000000..c7e64afa614 --- /dev/null +++ b/drivers/media/dvb-frontends/ts2020.h @@ -0,0 +1,50 @@ +/* + Montage Technology TS2020 - Silicon Tuner driver + Copyright (C) 2009-2012 Konstantin Dimitrov <kosio.dimitrov@gmail.com> + + Copyright (C) 2009-2012 TurboSight.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef TS2020_H +#define TS2020_H + +#include <linux/dvb/frontend.h> + +struct ts2020_config { + u8 tuner_address; + u8 clk_out_div; +}; + +#if defined(CONFIG_DVB_TS2020) || \ + (defined(CONFIG_DVB_TS2020_MODULE) && defined(MODULE)) + +extern struct dvb_frontend *ts2020_attach( + struct dvb_frontend *fe, + const struct ts2020_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *ts2020_attach( + struct dvb_frontend *fe, + const struct ts2020_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* TS2020_H */ diff --git a/drivers/media/dvb-frontends/tua6100.h b/drivers/media/dvb-frontends/tua6100.h index f83dbd5e42a..83a9c30e67c 100644 --- a/drivers/media/dvb-frontends/tua6100.h +++ b/drivers/media/dvb-frontends/tua6100.h @@ -34,7 +34,7 @@ #include <linux/i2c.h> #include "dvb_frontend.h" -#if defined(CONFIG_DVB_TUA6100) || (defined(CONFIG_DVB_TUA6100_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_TUA6100) extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c); #else static inline struct dvb_frontend* tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c) diff --git a/drivers/media/dvb-frontends/ves1820.h b/drivers/media/dvb-frontends/ves1820.h index e902ed634ec..c073f353ac3 100644 --- a/drivers/media/dvb-frontends/ves1820.h +++ b/drivers/media/dvb-frontends/ves1820.h @@ -41,7 +41,7 @@ struct ves1820_config u8 selagc:1; }; -#if defined(CONFIG_DVB_VES1820) || (defined(CONFIG_DVB_VES1820_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_VES1820) extern struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, struct i2c_adapter* i2c, u8 pwm); #else diff --git a/drivers/media/dvb-frontends/ves1x93.h b/drivers/media/dvb-frontends/ves1x93.h index 8a5a49e808f..2307caea6ae 100644 --- a/drivers/media/dvb-frontends/ves1x93.h +++ b/drivers/media/dvb-frontends/ves1x93.h @@ -40,7 +40,7 @@ struct ves1x93_config u8 invert_pwm:1; }; -#if defined(CONFIG_DVB_VES1X93) || (defined(CONFIG_DVB_VES1X93_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_VES1X93) extern struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb-frontends/zl10353.h b/drivers/media/dvb-frontends/zl10353.h index 6e3ca9eed04..50c1004aef3 100644 --- a/drivers/media/dvb-frontends/zl10353.h +++ b/drivers/media/dvb-frontends/zl10353.h @@ -47,7 +47,7 @@ struct zl10353_config u8 pll_0; /* default: 0x15 */ }; -#if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_ZL10353) extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config, struct i2c_adapter *i2c); #else |