diff options
Diffstat (limited to 'drivers/media/dvb/b2c2')
-rw-r--r-- | drivers/media/dvb/b2c2/Kconfig | 5 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/Makefile | 2 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-common.h | 17 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-dma.c | 4 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-eeprom.c | 9 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 211 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-i2c.c | 180 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-misc.c | 2 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-pci.c | 2 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-reg.h | 2 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-sram.c | 28 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-usb.c | 17 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop.c | 18 |
13 files changed, 355 insertions, 142 deletions
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index 3197aeb61d1..73dc2ee9b01 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -9,6 +9,11 @@ config DVB_B2C2_FLEXCOP select DVB_STV0297 if !DVB_FE_CUSTOMISE select DVB_BCM3510 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select DVB_S5H1420 if !DVB_FE_CUSTOMISE + select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE + select DVB_ISL6421 if !DVB_FE_CUSTOMISE + select DVB_CX24123 if !DVB_FE_CUSTOMISE help Support for the digital TV receiver chip made by B2C2 Inc. included in Technisats PCI cards and USB boxes. diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile index e97ff60a1ef..d9db066f985 100644 --- a/drivers/media/dvb/b2c2/Makefile +++ b/drivers/media/dvb/b2c2/Makefile @@ -2,6 +2,7 @@ b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \ flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o + ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),) b2c2-flexcop-objs += flexcop-dma.o endif @@ -13,3 +14,4 @@ b2c2-flexcop-usb-objs = flexcop-usb.o obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ +EXTRA_CFLAGS += -Idrivers/media/common/tuners/ diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h index 5a6c4fe249e..8ce06336e76 100644 --- a/drivers/media/dvb/b2c2/flexcop-common.h +++ b/drivers/media/dvb/b2c2/flexcop-common.h @@ -44,6 +44,14 @@ struct flexcop_dma { u32 size; /* size of each address in bytes */ }; +struct flexcop_i2c_adapter { + struct flexcop_device *fc; + struct i2c_adapter i2c_adap; + + u8 no_base_addr; + flexcop_i2c_port_t port; +}; + /* Control structure for data definitions that are common to * the B2C2-based PCI and USB devices. */ @@ -72,7 +80,7 @@ struct flexcop_device { struct dmx_frontend mem_frontend; int (*fe_sleep) (struct dvb_frontend *); - struct i2c_adapter i2c_adap; + struct flexcop_i2c_adapter fc_i2c_adap[3]; struct mutex i2c_mutex; struct module *owner; @@ -87,7 +95,8 @@ struct flexcop_device { int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value); - int (*i2c_request) (struct flexcop_device*, flexcop_access_op_t, flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); + int (*i2c_request) (struct flexcop_i2c_adapter*, + flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); int (*stream_control) (struct flexcop_device*, int); int (*get_mac_addr) (struct flexcop_device *fc, int extended); @@ -128,8 +137,8 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended); * one. We have it in flexcop-i2c.c, because it is going via the actual * I2C-channel of the flexcop. */ -int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t, - flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); +int flexcop_i2c_request(struct flexcop_i2c_adapter*, flexcop_access_op_t, + u8 chipaddr, u8 addr, u8 *buf, u16 len); /* from flexcop-sram.c */ int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target); diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c index 6f592bc32d2..a91ed28f03a 100644 --- a/drivers/media/dvb/b2c2/flexcop-dma.c +++ b/drivers/media/dvb/b2c2/flexcop-dma.c @@ -112,7 +112,7 @@ static int flexcop_dma_remap(struct flexcop_device *fc, { flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c; flexcop_ibi_value v = fc->read_ibi_reg(fc,r); - deb_info("%s\n",__FUNCTION__); + deb_info("%s\n",__func__); v.dma_0xc.remap_enable = onoff; fc->write_ibi_reg(fc,r,v); return 0; @@ -162,7 +162,7 @@ int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_remap(fc,dma_idx,0); - deb_info("%s\n",__FUNCTION__); + deb_info("%s\n",__func__); v.dma_0x4_write.dmatimer = cycles; fc->write_ibi_reg(fc,r,v); return 0; diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/dvb/b2c2/flexcop-eeprom.c index bbcf070a178..8a8ae8a3e6b 100644 --- a/drivers/media/dvb/b2c2/flexcop-eeprom.c +++ b/drivers/media/dvb/b2c2/flexcop-eeprom.c @@ -114,15 +114,18 @@ static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t { int i,ret = 0; u8 chipaddr = 0x50 | ((addr >> 8) & 3); - for (i = 0; i < retries; i++) - if ((ret = fc->i2c_request(fc,op,FC_I2C_PORT_EEPROM,chipaddr,addr & 0xff,buf,len)) == 0) + for (i = 0; i < retries; i++) { + ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr, + addr & 0xff, buf, len); + if (ret == 0) break; + } return ret; } static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries) { - int ret = flexcop_eeprom_request(fc,FC_READ,addr,buf,len,retries); + int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries); if (ret == 0) if (calc_lrc(buf, len - 1) != buf[len - 1]) ret = -EINVAL; diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 0378fd64659..7b0ea3bdfaf 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -5,6 +5,8 @@ * * see flexcop.c for copyright information. */ +#include <media/tuner.h> + #include "flexcop.h" #include "stv0299.h" @@ -15,6 +17,15 @@ #include "mt312.h" #include "lgdt330x.h" #include "dvb-pll.h" +#include "tuner-simple.h" + +#include "s5h1420.h" +#include "itd1000.h" + +#include "cx24123.h" +#include "cx24113.h" + +#include "isl6421.h" /* lnb control */ @@ -180,13 +191,13 @@ static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dv buf[2] = 0x84; /* 0xC4 */ buf[3] = 0x08; - if (params->frequency < 1500000) buf[3] |= 0x10; + if (params->frequency < 1500000) + buf[3] |= 0x10; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) { + if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) return -EIO; - } return 0; } @@ -241,7 +252,7 @@ static struct stv0299_config samsung_tbmu24112_config = { .mclk = 88000000UL, .invert = 0, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_LK, + .lock_output = STV0299_LOCKOUTPUT_LK, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 100, .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, @@ -337,7 +348,7 @@ static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) + if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) return -EIO; return 0; } @@ -386,10 +397,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]); - ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_TUNER, 0x61, buf[0], &buf[1], 3); + ret = fc->i2c_request(&fc->fc_i2c_adap[2], + FC_WRITE, 0x61, buf[0], &buf[1], 3); deb_tuner("tuner write returned: %d\n",ret); - return 0; + return ret; } static u8 alps_tdee4_stv0297_inittab[] = { @@ -472,56 +484,159 @@ static struct stv0297_config alps_tdee4_stv0297_config = { // .pll_set = alps_tdee4_stv0297_pll_set, }; + +/* SkyStar2 rev2.7 (a/u) */ +static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { + .demod_address = 0x53, + .invert = 1, + .repeated_start_workaround = 1, +}; + +static struct itd1000_config skystar2_rev2_7_itd1000_config = { + .i2c_address = 0x61, +}; + +/* SkyStar2 rev2.8 */ +static struct cx24123_config skystar2_rev2_8_cx24123_config = { + .demod_address = 0x55, + .dont_use_pll = 1, + .agc_callback = cx24113_agc_callback, +}; + +static const struct cx24113_config skystar2_rev2_8_cx24113_config = { + .i2c_addr = 0x54, + .xtal_khz = 10111, +}; + /* try to figure out the frontend, each card/box can have on of the following list */ int flexcop_frontend_init(struct flexcop_device *fc) { struct dvb_frontend_ops *ops; + struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap; + struct i2c_adapter *i2c_tuner; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[0].no_base_addr = 1; + fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c); + if (fc->fe != NULL) { + flexcop_ibi_value r108; + i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); + ops = &fc->fe->ops; + + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY_REV27; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[2].no_base_addr = 1; + if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL) + err("ISL6421 could NOT be attached"); + else + info("ISL6421 successfully attached"); + + /* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */ + r108.raw = 0x00000506; + fc->write_ibi_reg(fc, tw_sm_c_108, r108); + if (i2c_tuner) { + if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL) + err("ITD1000 could NOT be attached"); + else + info("ITD1000 successfully attached"); + } + goto fe_found; + } + fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */ + + /* try the sky v2.8 (cx24123, isl6421) */ + fc->fe = dvb_attach(cx24123_attach, + &skystar2_rev2_8_cx24123_config, i2c); + if (fc->fe != NULL) { + i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe); + if (i2c_tuner != NULL) { + if (dvb_attach(cx24113_attach, fc->fe, + &skystar2_rev2_8_cx24113_config, + i2c_tuner) == NULL) + err("CX24113 could NOT be attached"); + else + info("CX24113 successfully attached"); + } + + fc->dev_type = FC_SKY_REV28; + + fc->fc_i2c_adap[2].no_base_addr = 1; + if (dvb_attach(isl6421_attach, fc->fe, + &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL) + err("ISL6421 could NOT be attached"); + else + info("ISL6421 successfully attached"); + + /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an + * IR-receiver (PIC16F818) - but the card has no input for + * that ??? */ + + goto fe_found; + } /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ - if ((fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) { + fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); + if (fc->fe != NULL) { ops = &fc->fe->ops; ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params; ops->set_voltage = flexcop_set_voltage; - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY; + goto fe_found; + } - fc->dev_type = FC_SKY; - info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address); - } else /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ - if ((fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) { - fc->dev_type = FC_AIR_DVB; + fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_AIR_DVB; fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; - info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); - } else + goto fe_found; + } + /* try the air atsc 2nd generation (nxt2002) */ - if ((fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_AIR_ATSC2; + fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_AIR_ATSC2; dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV); - info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); - } else - /* try the air atsc 3nd generation (lgdt3303) */ - if ((fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_AIR_ATSC3; - dvb_attach(dvb_pll_attach, fc->fe, 0x61, &fc->i2c_adap, DVB_PLL_LG_TDVS_H06XF); - info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address); - } else + goto fe_found; + } + + fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_AIR_ATSC3; + dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, + TUNER_LG_TDVS_H06XF); + goto fe_found; + } + /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ - if ((fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_AIR_ATSC1; - info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address); - } else + fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_AIR_ATSC1; + goto fe_found; + } + /* try the cable dvb (stv0297) */ - if ((fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_CABLE; + fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); + if (fc->fe != NULL) { + fc->dev_type = FC_CABLE; fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; - info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); - } else + goto fe_found; + } + /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ - if ((fc->fe = dvb_attach(vp310_mt312_attach, &skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { + fc->fe = dvb_attach(vp310_mt312_attach, + &skystar23_samsung_tbdu18132_config, i2c); + if (fc->fe != NULL) { ops = &fc->fe->ops; ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params; @@ -535,19 +650,21 @@ int flexcop_frontend_init(struct flexcop_device *fc) ops->sleep = flexcop_sleep; fc->dev_type = FC_SKY_OLD; - info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address); + goto fe_found; } - if (fc->fe == NULL) { - err("no frontend driver found for this B2C2/FlexCop adapter"); - return -ENODEV; - } else { - if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { - err("frontend registration failed!"); - dvb_frontend_detach(fc->fe); - fc->fe = NULL; - return -EINVAL; - } + err("no frontend driver found for this B2C2/FlexCop adapter"); + return -ENODEV; + +fe_found: + info("found '%s' .", fc->fe->ops.info.name); + if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { + err("frontend registration failed!"); + ops = &fc->fe->ops; + if (ops->release != NULL) + ops->release(fc->fe); + fc->fe = NULL; + return -EINVAL; } fc->init_state |= FC_STATE_FE_INIT; return 0; diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index 6bf858a436c..55973eaf371 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -9,6 +9,8 @@ #define FC_MAX_I2C_RETRIES 100000 +/* #define DUMP_I2C_MESSAGES */ + static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100) { int i; @@ -38,30 +40,25 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r return -EREMOTEIO; } -static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf) +static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, + flexcop_ibi_value r100, u8 *buf) { flexcop_ibi_value r104; int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ ret; - if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) { - /* The Cablestar needs a different kind of i2c-transfer (does not - * support "Repeat Start"): - * wait for the ACK failure, - * and do a subsequent read with the Bit 30 enabled - */ - r100.tw_sm_c_100.no_base_addr_ack_error = 1; - if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) { - deb_i2c("no_base_addr read failed. %d\n",ret); - return ret; - } + r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; + ret = flexcop_i2c_operation(i2c->fc, &r100); + if (ret != 0) { + deb_i2c("read failed. %d\n", ret); + return ret; } buf[0] = r100.tw_sm_c_100.data1_reg; if (len > 0) { - r104 = fc->read_ibi_reg(fc,tw_sm_c_104); - deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw); + r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104); + deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw); /* there is at least one more byte, otherwise we wouldn't be here */ buf[1] = r104.tw_sm_c_104.data2_reg; @@ -85,17 +82,22 @@ static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0; r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0; - deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw); + deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw); /* write the additional i2c data before doing the actual i2c operation */ - fc->write_ibi_reg(fc,tw_sm_c_104,r104); - return flexcop_i2c_operation(fc,&r100); + fc->write_ibi_reg(fc, tw_sm_c_104, r104); + return flexcop_i2c_operation(fc, &r100); } -int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, - flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len) +int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, + flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) { int ret; + +#ifdef DUMP_I2C_MESSAGES + int i; +#endif + u16 bytes_to_transfer; flexcop_ibi_value r100; @@ -103,7 +105,25 @@ int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, r100.raw = 0; r100.tw_sm_c_100.chipaddr = chipaddr; r100.tw_sm_c_100.twoWS_rw = op; - r100.tw_sm_c_100.twoWS_port_reg = port; + r100.tw_sm_c_100.twoWS_port_reg = i2c->port; + +#ifdef DUMP_I2C_MESSAGES + printk(KERN_DEBUG "%d ", i2c->port); + if (op == FC_READ) + printk("rd("); + else + printk("wr("); + + printk("%02x): %02x ", chipaddr, addr); +#endif + + /* in that case addr is the only value -> + * we write it twice as baseaddr and val0 + * BBTI is doing it like that for ISL6421 at least */ + if (i2c->no_base_addr && len == 0 && op == FC_WRITE) { + buf = &addr; + len = 1; + } while (len != 0) { bytes_to_transfer = len > 4 ? 4 : len; @@ -112,9 +132,14 @@ int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, r100.tw_sm_c_100.baseaddr = addr; if (op == FC_READ) - ret = flexcop_i2c_read4(fc, r100, buf); + ret = flexcop_i2c_read4(i2c, r100, buf); else - ret = flexcop_i2c_write4(fc,r100, buf); + ret = flexcop_i2c_write4(i2c->fc, r100, buf); + +#ifdef DUMP_I2C_MESSAGES + for (i = 0; i < bytes_to_transfer; i++) + printk("%02x ", buf[i]); +#endif if (ret < 0) return ret; @@ -122,7 +147,11 @@ int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, buf += bytes_to_transfer; addr += bytes_to_transfer; len -= bytes_to_transfer; - }; + } + +#ifdef DUMP_I2C_MESSAGES + printk("\n"); +#endif return 0; } @@ -132,7 +161,7 @@ EXPORT_SYMBOL(flexcop_i2c_request); /* master xfer callback for demodulator */ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) { - struct flexcop_device *fc = i2c_get_adapdata(i2c_adap); + struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap); int i, ret = 0; /* Some drivers use 1 byte or 0 byte reads as probes, which this @@ -142,34 +171,29 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1) return 1; - if (mutex_lock_interruptible(&fc->i2c_mutex)) + if (mutex_lock_interruptible(&i2c->fc->i2c_mutex)) return -ERESTARTSYS; - /* reading */ - if (num == 2 && - msgs[0].flags == 0 && - msgs[1].flags == I2C_M_RD && - msgs[0].buf != NULL && - msgs[1].buf != NULL) { - - ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len); - - } else for (i = 0; i < num; i++) { /* writing command */ - if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) { - ret = -EINVAL; + for (i = 0; i < num; i++) { + /* reading */ + if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) { + ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr, + msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len); + i++; /* skip the following message */ + } else /* writing */ + ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr, + msgs[i].buf[0], &msgs[i].buf[1], + msgs[i].len - 1); + if (ret < 0) { + err("i2c master_xfer failed"); break; } - - ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1); } - if (ret < 0) - err("i2c master_xfer failed"); - else - ret = num; - - mutex_unlock(&fc->i2c_mutex); + mutex_unlock(&i2c->fc->i2c_mutex); + if (ret == 0) + ret = num; return ret; } @@ -189,28 +213,68 @@ int flexcop_i2c_init(struct flexcop_device *fc) mutex_init(&fc->i2c_mutex); - memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter)); - strncpy(fc->i2c_adap.name, "B2C2 FlexCop device", - sizeof(fc->i2c_adap.name)); - - i2c_set_adapdata(&fc->i2c_adap,fc); + fc->fc_i2c_adap[0].fc = fc; + fc->fc_i2c_adap[1].fc = fc; + fc->fc_i2c_adap[2].fc = fc; + + fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD; + fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM; + fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER; + + strncpy(fc->fc_i2c_adap[0].i2c_adap.name, + "B2C2 FlexCop I2C to demod", I2C_NAME_SIZE); + strncpy(fc->fc_i2c_adap[1].i2c_adap.name, + "B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE); + strncpy(fc->fc_i2c_adap[2].i2c_adap.name, + "B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE); + + i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]); + i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]); + i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]); + + fc->fc_i2c_adap[0].i2c_adap.class = + fc->fc_i2c_adap[1].i2c_adap.class = + fc->fc_i2c_adap[2].i2c_adap.class = I2C_CLASS_TV_DIGITAL; + fc->fc_i2c_adap[0].i2c_adap.algo = + fc->fc_i2c_adap[1].i2c_adap.algo = + fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo; + fc->fc_i2c_adap[0].i2c_adap.algo_data = + fc->fc_i2c_adap[1].i2c_adap.algo_data = + fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL; + fc->fc_i2c_adap[0].i2c_adap.dev.parent = + fc->fc_i2c_adap[1].i2c_adap.dev.parent = + fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev; + + ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap); + if (ret < 0) + return ret; - fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL; - fc->i2c_adap.algo = &flexcop_algo; - fc->i2c_adap.algo_data = NULL; - fc->i2c_adap.dev.parent = fc->dev; + ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap); + if (ret < 0) + goto adap_1_failed; - if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0) - return ret; + ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap); + if (ret < 0) + goto adap_2_failed; fc->init_state |= FC_STATE_I2C_INIT; return 0; + +adap_2_failed: + i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); +adap_1_failed: + i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); + + return ret; } void flexcop_i2c_exit(struct flexcop_device *fc) { - if (fc->init_state & FC_STATE_I2C_INIT) - i2c_del_adapter(&fc->i2c_adap); + if (fc->init_state & FC_STATE_I2C_INIT) { + i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap); + i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); + i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); + } fc->init_state &= ~FC_STATE_I2C_INIT; } diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c index 167583bf062..93d20e56f90 100644 --- a/drivers/media/dvb/b2c2/flexcop-misc.c +++ b/drivers/media/dvb/b2c2/flexcop-misc.c @@ -52,6 +52,8 @@ static const char *flexcop_device_names[] = { "Sky2PC/SkyStar 2 DVB-S (old version)", "Cable2PC/CableStar 2 DVB-C", "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)", + "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u", + "Sky2PC/SkyStar 2 DVB-S rev 2.8", }; static const char *flexcop_bus_names[] = { diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index 01af4d237eb..5b30dfc7846 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -32,7 +32,7 @@ MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently jus #define deb_irq(args...) dprintk(0x08,args) #define deb_chk(args...) dprintk(0x10,args) -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS); diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h index 491f9bd6e19..7599fccc1a5 100644 --- a/drivers/media/dvb/b2c2/flexcop-reg.h +++ b/drivers/media/dvb/b2c2/flexcop-reg.h @@ -25,6 +25,8 @@ typedef enum { FC_SKY_OLD, FC_CABLE, FC_AIR_ATSC3, + FC_SKY_REV27, + FC_SKY_REV28, } flexcop_device_type_t; typedef enum { diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/dvb/b2c2/flexcop-sram.c index 01570ec8096..cda69528548 100644 --- a/drivers/media/dvb/b2c2/flexcop-sram.c +++ b/drivers/media/dvb/b2c2/flexcop-sram.c @@ -90,7 +90,7 @@ static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 * }; if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); + printk("%s: SRAM timeout\n", __func__); write_reg_dw(adapter, 0x700, command); @@ -115,7 +115,7 @@ static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, }; if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); + printk("%s: SRAM timeout\n", __func__); write_reg_dw(adapter, 0x700, command); @@ -127,7 +127,7 @@ static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, }; if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); + printk("%s: SRAM timeout\n", __func__); value = read_reg_dw(adapter, 0x700) >> 0x10; @@ -240,13 +240,13 @@ static void sram_init(struct adapter *adapter) adapter->dw_sram_type = tmp & 0x30000; - ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); + ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type); } else { adapter->dw_sram_type = 0x10000; - ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); + ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type); } /* return value is never used? */ @@ -257,7 +257,7 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) { u8 tmp1, tmp2; - dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr); + dprintk("%s: mask = %x, addr = %x\n", __func__, mask, addr); sram_set_size(adapter, mask); sram_init(adapter); @@ -275,7 +275,7 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) sram_read(adapter, addr, &tmp2, 1); sram_read(adapter, addr, &tmp2, 1); - dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2); + dprintk("%s: wrote 0xa5, read 0x%2x\n", __func__, tmp2); if (tmp2 != 0xa5) return 0; @@ -293,7 +293,7 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) sram_read(adapter, addr, &tmp2, 1); sram_read(adapter, addr, &tmp2, 1); - dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2); + dprintk("%s: wrote 0x5a, read 0x%2x\n", __func__, tmp2); if (tmp2 != 0x5a) return 0; @@ -340,7 +340,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) tmp3 = read_reg_dw(adapter, 0x71c); - dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3); + dprintk("%s: tmp3 = %x\n", __func__, tmp3); write_reg_dw(adapter, 0x71c, tmp2); @@ -351,7 +351,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 32K\n", __FUNCTION__); + dprintk("%s: sram size = 32K\n", __func__); return 32; } @@ -361,7 +361,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 128K\n", __FUNCTION__); + dprintk("%s: sram size = 128K\n", __func__); return 128; } @@ -371,7 +371,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 64K\n", __FUNCTION__); + dprintk("%s: sram size = 64K\n", __func__); return 64; } @@ -381,7 +381,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 32K\n", __FUNCTION__); + dprintk("%s: sram size = 32K\n", __func__); return 32; } @@ -390,7 +390,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__); + dprintk("%s: SRAM detection failed. Set to 32K \n", __func__); return 0; } diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 87fb75f0d1c..449fb5c3d0b 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -211,10 +211,11 @@ static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set, #endif /* usb i2c stuff */ -static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb, +static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, flexcop_usb_request_t req, flexcop_usb_i2c_function_t func, - flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u8 buflen) + u8 chipaddr, u8 addr, u8 *buf, u8 buflen) { + struct flexcop_usb *fc_usb = i2c->fc->bus_specific; u16 wValue, wIndex; int nWaitTime,pipe,len; // u8 dwRequestType; @@ -242,7 +243,7 @@ static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb, deb_info("unsupported function for i2c_req %x\n",func); return -EINVAL; } - wValue = (func << 8 ) | (port << 4); + wValue = (func << 8) | (i2c->port << 4); wIndex = (chipaddr << 8 ) | addr; deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req, @@ -274,13 +275,15 @@ static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_regi return flexcop_usb_readwrite_dw(fc,reg, &val.raw, 0); } -static int flexcop_usb_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, - flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len) +static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c, + flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) { if (op == FC_READ) - return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_READ,port,chipaddr,addr,buf,len); + return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST, + USB_FUNC_I2C_READ, chipaddr, addr, buf, len); else - return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_WRITE,port,chipaddr,addr,buf,len); + return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST, + USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len); } static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb, u8 *buffer, int buffer_length) diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c index 2ddafd071c9..5f79c8dc383 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -49,6 +49,8 @@ module_param_named(debug, b2c2_flexcop_debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS); #undef DEBSTATUS +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + /* global zero for ibi values */ flexcop_ibi_value ibi_zero; @@ -66,8 +68,10 @@ static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) static int flexcop_dvb_init(struct flexcop_device *fc) { - int ret; - if ((ret = dvb_register_adapter(&fc->dvb_adapter,"FlexCop Digital TV device",fc->owner,fc->dev)) < 0) { + int ret = dvb_register_adapter(&fc->dvb_adapter, + "FlexCop Digital TV device", fc->owner, + fc->dev, adapter_nr); + if (ret < 0) { err("error registering DVB adapter"); return ret; } @@ -257,6 +261,12 @@ int flexcop_device_initialize(struct flexcop_device *fc) if ((ret = flexcop_dvb_init(fc))) goto error; + /* i2c has to be done before doing EEProm stuff - + * because the EEProm is accessed via i2c */ + ret = flexcop_i2c_init(fc); + if (ret) + goto error; + /* do the MAC address reading after initializing the dvb_adapter */ if (fc->get_mac_addr(fc, 0) == 0) { u8 *b = fc->dvb_adapter.proposed_mac; @@ -266,10 +276,6 @@ int flexcop_device_initialize(struct flexcop_device *fc) } else warn("reading of MAC address failed.\n"); - - if ((ret = flexcop_i2c_init(fc))) - goto error; - if ((ret = flexcop_frontend_init(fc))) goto error; |