summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/dvb-usb/az6027.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/dvb-usb/az6027.c')
-rw-r--r--drivers/media/dvb/dvb-usb/az6027.c26
1 files changed, 13 insertions, 13 deletions
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
index 57e2444d51a..bf67b4dfd82 100644
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -40,7 +40,6 @@ static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = {
{ STB0899_DISRX_ST0 , 0x04 },
{ STB0899_DISRX_ST1 , 0x00 },
{ STB0899_DISPARITY , 0x00 },
- { STB0899_DISFIFO , 0x00 },
{ STB0899_DISSTATUS , 0x20 },
{ STB0899_DISF22 , 0x99 },
{ STB0899_DISF22RX , 0xa8 },
@@ -782,7 +781,6 @@ static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
u8 buf;
- int ret;
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct i2c_msg i2c_msg = {
@@ -800,17 +798,17 @@ static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
switch (voltage) {
case SEC_VOLTAGE_13:
buf = 1;
- ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
case SEC_VOLTAGE_18:
buf = 2;
- ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
case SEC_VOLTAGE_OFF:
buf = 0;
- ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
default:
@@ -910,16 +908,16 @@ static int az6027_frontend_attach(struct dvb_usb_adapter *adap)
az6027_frontend_reset(adap);
deb_info("adap = %p, dev = %p\n", adap, adap->dev);
- adap->fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap);
+ adap->fe_adap[0].fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap);
- if (adap->fe) {
+ if (adap->fe_adap[0].fe) {
deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address);
- if (stb6100_attach(adap->fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) {
+ if (stb6100_attach(adap->fe_adap[0].fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) {
deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address);
- adap->fe->ops.set_voltage = az6027_set_voltage;
+ adap->fe_adap[0].fe->ops.set_voltage = az6027_set_voltage;
az6027_ci_init(adap);
} else {
- adap->fe = NULL;
+ adap->fe_adap[0].fe = NULL;
}
} else
warn("no front-end attached\n");
@@ -954,7 +952,6 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i = 0, j = 0, len = 0;
- int ret;
u16 index;
u16 value;
int length;
@@ -990,7 +987,7 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
value = msg[i].addr + (msg[i].len << 8);
length = msg[i + 1].len + 6;
- ret = az6027_usb_in_op(d, req, value, index, data, length);
+ az6027_usb_in_op(d, req, value, index, data, length);
len = msg[i + 1].len;
for (j = 0; j < len; j++)
msg[i + 1].buf[j] = data[j + 5];
@@ -1017,7 +1014,7 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
index = 0x0;
value = msg[i].addr;
length = msg[i].len + 6;
- ret = az6027_usb_in_op(d, req, value, index, data, length);
+ az6027_usb_in_op(d, req, value, index, data, length);
len = msg[i].len;
for (j = 0; j < len; j++)
msg[i].buf[j] = data[j + 5];
@@ -1106,6 +1103,8 @@ static struct dvb_usb_device_properties az6027_properties = {
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = az6027_streaming_ctrl,
.frontend_attach = az6027_frontend_attach,
@@ -1120,6 +1119,7 @@ static struct dvb_usb_device_properties az6027_properties = {
}
}
},
+ }},
}
},
/*