diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb/cinergyT2.h')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/cinergyT2.h | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/drivers/media/dvb/dvb-usb/cinergyT2.h b/drivers/media/dvb/dvb-usb/cinergyT2.h new file mode 100644 index 00000000000..11d79eb384c --- /dev/null +++ b/drivers/media/dvb/dvb-usb/cinergyT2.h @@ -0,0 +1,95 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and + * Holger Waechtler <holger@qanu.de> + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _DVB_USB_CINERGYT2_H_ +#define _DVB_USB_CINERGYT2_H_ + +#include <linux/usb/input.h> + +#define DVB_USB_LOG_PREFIX "cinergyT2" +#include "dvb-usb.h" + +#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver" + +extern int dvb_usb_cinergyt2_debug; + +#define deb_info(args...) dprintk(dvb_usb_cinergyt2_debug, 0x001, args) +#define deb_xfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x002, args) +#define deb_pll(args...) dprintk(dvb_usb_cinergyt2_debug, 0x004, args) +#define deb_ts(args...) dprintk(dvb_usb_cinergyt2_debug, 0x008, args) +#define deb_err(args...) dprintk(dvb_usb_cinergyt2_debug, 0x010, args) +#define deb_rc(args...) dprintk(dvb_usb_cinergyt2_debug, 0x020, args) +#define deb_fw(args...) dprintk(dvb_usb_cinergyt2_debug, 0x040, args) +#define deb_mem(args...) dprintk(dvb_usb_cinergyt2_debug, 0x080, args) +#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x100, args) + + + +enum cinergyt2_ep1_cmd { + CINERGYT2_EP1_PID_TABLE_RESET = 0x01, + CINERGYT2_EP1_PID_SETUP = 0x02, + CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03, + CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04, + CINERGYT2_EP1_GET_TUNER_STATUS = 0x05, + CINERGYT2_EP1_START_SCAN = 0x06, + CINERGYT2_EP1_CONTINUE_SCAN = 0x07, + CINERGYT2_EP1_GET_RC_EVENTS = 0x08, + CINERGYT2_EP1_SLEEP_MODE = 0x09, + CINERGYT2_EP1_GET_FIRMWARE_VERSION = 0x0A +}; + + +struct dvbt_get_status_msg { + uint32_t freq; + uint8_t bandwidth; + uint16_t tps; + uint8_t flags; + uint16_t gain; + uint8_t snr; + uint32_t viterbi_error_rate; + uint32_t rs_error_rate; + uint32_t uncorrected_block_count; + uint8_t lock_bits; + uint8_t prev_lock_bits; +} __attribute__((packed)); + + +struct dvbt_set_parameters_msg { + uint8_t cmd; + uint32_t freq; + uint8_t bandwidth; + uint16_t tps; + uint8_t flags; +} __attribute__((packed)); + + +extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d); + +#endif /* _DVB_USB_CINERGYT2_H_ */ + |