diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/Makefile | 3 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/anysee.c | 553 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/anysee.h | 304 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/au6610.c | 83 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/au6610.h | 22 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/cxusb.c | 146 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/cxusb.h | 3 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dvb-usb-i2c.c | 4 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 8 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/gl861.c | 38 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/gl861.h | 2 |
13 files changed, 1116 insertions, 72 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index f00a0eb4042..a577c0f89f6 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -76,6 +76,7 @@ config DVB_USB_DIB0700 select DVB_DIB3000MC select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The @@ -107,6 +108,8 @@ config DVB_USB_CXUSB select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode @@ -120,6 +123,8 @@ config DVB_USB_M920X depends on DVB_USB select DVB_MT352 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE + select DVB_TDA1004X if !DVB_FE_CUSTOMISE help Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. Currently, only devices with a product id of @@ -241,3 +246,13 @@ config DVB_USB_AF9005_REMOTE Say Y here to support the default remote control decoding for the Afatech AF9005 based receiver. +config DVB_USB_ANYSEE + tristate "Anysee DVB-T/C USB2.0 support" + depends on DVB_USB + select DVB_PLL if !DVB_FE_CUSTOMISE + select DVB_MT352 if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10023 if !DVB_FE_CUSTOMISE + help + Say Y here to support the Anysee E30, Anysee E30 Plus or + Anysee E30 C Plus DVB USB2.0 receiver. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index c6511a6c0ab..44c11e45e56 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -61,6 +61,9 @@ obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o dvb-usb-af9005-remote-objs = af9005-remote.o obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o +dvb-usb-anysee-objs = anysee.o +obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c new file mode 100644 index 00000000000..adfd4fc82ef --- /dev/null +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -0,0 +1,553 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This + * module registers serial interface that can be used to communicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#include "anysee.h" +#include "tda1002x.h" +#include "mt352.h" +#include "mt352_priv.h" +#include "zl10353.h" + +/* debug */ +static int dvb_usb_anysee_debug; +module_param_named(debug, dvb_usb_anysee_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct mutex anysee_usb_mutex; + +static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, + u8 *rbuf, u8 rlen) +{ + struct anysee_state *state = d->priv; + int act_len, ret; + u8 buf[64]; + + if (slen > sizeof(buf)) + slen = sizeof(buf); + memcpy(&buf[0], sbuf, slen); + buf[60] = state->seq++; + + if (mutex_lock_interruptible(&anysee_usb_mutex) < 0) + return -EAGAIN; + + /* We need receive one message more after dvb_usb_generic_rw due + to weird transaction flow, which is 1 x send + 2 x receive. */ + ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); + + if (!ret) { + /* receive 2nd answer */ + ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf), + &act_len, 2000); + if (ret) + err("%s: recv bulk message failed: %d", __func__, ret); + else { + deb_xfer("<<< "); + debug_dump(buf, act_len, deb_xfer); + } + } + + /* read request, copy returned data to return buf */ + if (!ret && rbuf && rlen) + memcpy(rbuf, buf, rlen); + + mutex_unlock(&anysee_usb_mutex); + + return ret; +} + +static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +{ + u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01}; + int ret; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1); + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val); + return ret; +} + +static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) +{ + u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val}; + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) +{ + u8 buf[] = {CMD_GET_HW_INFO}; + return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3); +} + +static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0); +} + +static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval}; + deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_init(struct dvb_usb_device *d) +{ + int ret; + /* LED light */ + ret = anysee_led_ctrl(d, 0x01, 0x03); + if (ret) + return ret; + + /* enable IR */ + ret = anysee_ir_ctrl(d, 1); + if (ret) + return ret; + + return 0; +} + +/* I2C */ +static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret, inc, i = 0; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + u8 buf[6]; + buf[0] = CMD_I2C_READ; + buf[1] = msg[i].addr + 1; + buf[2] = msg[i].buf[0]; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x01; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf, + msg[i+1].len); + inc = 2; + } else { + u8 buf[4+msg[i].len]; + buf[0] = CMD_I2C_WRITE; + buf[1] = msg[i].addr; + buf[2] = msg[i].len; + buf[3] = 0x01; + memcpy(&buf[4], msg[i].buf, msg[i].len); + ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); + inc = 1; + } + if (ret) + return ret; + + i += inc; + } + + mutex_unlock(&d->i2c_mutex); + + return i; +} + +static u32 anysee_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm anysee_i2c_algo = { + .master_xfer = anysee_master_xfer, + .functionality = anysee_i2c_func, +}; + +static int anysee_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; + static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +/* Callbacks for DVB USB */ +static struct tda10023_config anysee_tda10023_config = { + .demod_address = 0x1a, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C, + .deltaf = 0xfeeb, +}; + +static struct mt352_config anysee_mt352_config = { + .demod_address = 0x1e, + .demod_init = anysee_mt352_demod_init, +}; + +static struct zl10353_config anysee_zl10353_config = { + .demod_address = 0x1e, + .parallel_ts = 1, +}; + +static int anysee_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct anysee_state *state = adap->dev->priv; + u8 hw_info[3]; + u8 io_d; /* IO port D */ + + /* check which hardware we have + We must do this call two times to get reliable values (hw bug). */ + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + + /* Meaning of these info bytes are guessed. */ + info("firmware version:%d.%d.%d hardware id:%d", + 0, hw_info[1], hw_info[2], hw_info[0]); + + ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */ + if (ret) + return ret; + deb_info("%s: IO port D:%02x\n", __func__, io_d); + + /* Select demod using trial and error method. */ + + /* Try to attach demodulator in following order: + model demod hw firmware + 1. E30 MT352 02 0.2.1 + 2. E30 ZL10353 02 0.2.1 + 3. E30 Plus ZL10353 06 0.1.0 + 4. E30C Plus TDA10023 0a 0.1.0 rev 0.2 + 4. E30C Plus TDA10023 0f 0.1.2 rev 0.4 + */ + + /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */ + adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* connect demod on IO port D for TDA10023 & ZL10353 */ + ret = anysee_write_reg(adap->dev, 0xb0, 0x25); + if (ret) + return ret; + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* IO port E - E30C rev 0.4 board requires this */ + ret = anysee_write_reg(adap->dev, 0xb1, 0xa7); + if (ret) + return ret; + + /* Philips TDA10023 DVB-C demod */ + adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config, + &adap->dev->i2c_adap, 0x48); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; + return 0; + } + + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + if (ret) + return ret; + + err("Unkown Anysee version: %02x %02x %02x. "\ + "Please report the <linux-dvb@linuxtv.org>.", + hw_info[0], hw_info[1], hw_info[2]); + + return -ENODEV; +} + +static int anysee_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct anysee_state *state = adap->dev->priv; + deb_info("%s: \n", __func__); + + switch (state->tuner) { + case DVB_PLL_THOMSON_DTT7579: + /* Thomson dtt7579 (not sure) PLL inside of: + Samsung DNOS404ZH102A NIM + Samsung DNOS404ZH103A NIM */ + dvb_attach(dvb_pll_attach, adap->fe, 0x61, + NULL, DVB_PLL_THOMSON_DTT7579); + break; + case DVB_PLL_SAMSUNG_DTOS403IH102A: + /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */ + dvb_attach(dvb_pll_attach, adap->fe, 0xc0, + &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + break; + } + + return 0; +} + +static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 buf[] = {CMD_GET_IR_CODE}; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + u8 ircode[2]; + int i, ret; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2); + if (ret) + return ret; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == ircode[0] && + keymap[i].data == ircode[1]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + return 0; + } + } + return 0; +} + +static struct dvb_usb_rc_key anysee_rc_keys[] = { + { 0x01, 0x00, KEY_0 }, + { 0x01, 0x01, KEY_1 }, + { 0x01, 0x02, KEY_2 }, + { 0x01, 0x03, KEY_3 }, + { 0x01, 0x04, KEY_4 }, + { 0x01, 0x05, KEY_5 }, + { 0x01, 0x06, KEY_6 }, + { 0x01, 0x07, KEY_7 }, + { 0x01, 0x08, KEY_8 }, + { 0x01, 0x09, KEY_9 }, + { 0x01, 0x0a, KEY_POWER }, + { 0x01, 0x0b, KEY_DOCUMENTS }, /* * */ + { 0x01, 0x19, KEY_FAVORITES }, + { 0x01, 0x20, KEY_SLEEP }, + { 0x01, 0x21, KEY_MODE }, /* 4:3 / 16:9 select */ + { 0x01, 0x22, KEY_ZOOM }, + { 0x01, 0x47, KEY_TEXT }, + { 0x01, 0x16, KEY_TV }, /* TV / radio select */ + { 0x01, 0x1e, KEY_LANGUAGE }, /* Second Audio Program */ + { 0x01, 0x1a, KEY_SUBTITLE }, + { 0x01, 0x1b, KEY_CAMERA }, /* screenshot */ + { 0x01, 0x42, KEY_MUTE }, + { 0x01, 0x0e, KEY_MENU }, + { 0x01, 0x0f, KEY_EPG }, + { 0x01, 0x17, KEY_INFO }, + { 0x01, 0x10, KEY_EXIT }, + { 0x01, 0x13, KEY_VOLUMEUP }, + { 0x01, 0x12, KEY_VOLUMEDOWN }, + { 0x01, 0x11, KEY_CHANNELUP }, + { 0x01, 0x14, KEY_CHANNELDOWN }, + { 0x01, 0x15, KEY_OK }, + { 0x01, 0x1d, KEY_RED }, + { 0x01, 0x1f, KEY_GREEN }, + { 0x01, 0x1c, KEY_YELLOW }, + { 0x01, 0x44, KEY_BLUE }, + { 0x01, 0x0c, KEY_SHUFFLE }, /* snapshot */ + { 0x01, 0x48, KEY_STOP }, + { 0x01, 0x50, KEY_PLAY }, + { 0x01, 0x51, KEY_PAUSE }, + { 0x01, 0x49, KEY_RECORD }, + { 0x01, 0x18, KEY_PREVIOUS }, /* |<< */ + { 0x01, 0x0d, KEY_NEXT }, /* >>| */ + { 0x01, 0x24, KEY_PROG1 }, /* F1 */ + { 0x01, 0x25, KEY_PROG2 }, /* F2 */ +}; + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties anysee_properties; + +static int anysee_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + mutex_init(&anysee_usb_mutex); + + /* There is one interface with two alternate settings. + Alternate setting 0 is for bulk transfer. + Alternate setting 1 is for isochronous transfer. + We use bulk transfer (alternate setting 0). */ + if (intf->num_altsetting < 1) + return -ENODEV; + + ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d, + adapter_nr); + if (ret) + return ret; + + alt = usb_altnum_to_altsetting(intf, 0); + if (alt == NULL) { + deb_info("%s: no alt found!\n", __func__); + return -ENODEV; + } + + ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret) + return ret; + + if (d) + ret = anysee_init(d); + + return ret; +} + +static struct usb_device_id anysee_table [] = { + { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) }, + { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, anysee_table); + +static struct dvb_usb_device_properties anysee_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = sizeof(struct anysee_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = anysee_streaming_ctrl, + .frontend_attach = anysee_frontend_attach, + .tuner_attach = anysee_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + } + }, + + .rc_key_map = anysee_rc_keys, + .rc_key_map_size = ARRAY_SIZE(anysee_rc_keys), + .rc_query = anysee_rc_query, + .rc_interval = 200, /* windows driver uses 500ms */ + + .i2c_algo = &anysee_i2c_algo, + + .generic_bulk_ctrl_endpoint = 1, + + .num_device_descs = 1, + .devices = { + { + .name = "Anysee DVB USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&anysee_table[0], + &anysee_table[1], NULL}, + }, + } +}; + +static struct usb_driver anysee_driver = { + .name = "dvb_usb_anysee", + .probe = anysee_probe, + .disconnect = dvb_usb_device_exit, + .id_table = anysee_table, +}; + +/* module stuff */ +static int __init anysee_module_init(void) +{ + int ret; + + ret = usb_register(&anysee_driver); + if (ret) + err("%s: usb_register failed. Error number %d", __func__, ret); + + return ret; +} + +static void __exit anysee_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&anysee_driver); +} + +module_init(anysee_module_init); +module_exit(anysee_module_exit); + +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h new file mode 100644 index 00000000000..7ca01ff6e13 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/anysee.h @@ -0,0 +1,304 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This + * module registers serial interface that can be used to communicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#ifndef _DVB_USB_ANYSEE_H_ +#define _DVB_USB_ANYSEE_H_ + +#define DVB_USB_LOG_PREFIX "anysee" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args) + +enum cmd { + CMD_I2C_READ = 0x33, + CMD_I2C_WRITE = 0x31, + CMD_REG_READ = 0xb0, + CMD_REG_WRITE = 0xb1, + CMD_STREAMING_CTRL = 0x12, + CMD_LED_AND_IR_CTRL = 0x16, + CMD_GET_IR_CODE = 0x41, + CMD_GET_HW_INFO = 0x19, + CMD_SMARTCARD = 0x34, +}; + +struct anysee_state { + u8 tuner; + u8 seq; +}; + +#endif + +/*************************************************************************** + * USB API description (reverse engineered) + *************************************************************************** + +Transaction flow: +================= +BULK[00001] >>> REQUEST PACKET 64 bytes +BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) +BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) + +General reply packet(s) are always used if not own reply defined. + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) +============================================================================ +| 00 | reply data (if any) from previous transaction +| | Just same reply packet as returned during previous transaction. +| | Needed only if reply is missed in previous transaction. +| | Just skip normally. +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) +============================================================================ +| 00 | reply data (if any) +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C WRITE REQUEST PACKET +============================================================================ +| 00 | 0x31 I2C write command +---------------------------------------------------------------------------- +| 01 | i2c address +---------------------------------------------------------------------------- +| 02 | data length +| | 0x02 (for typical I2C reg / val pair) +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04- | data +---------------------------------------------------------------------------- +| -59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C READ REQUEST PACKET +============================================================================ +| 00 | 0x33 I2C read command +---------------------------------------------------------------------------- +| 01 | i2c address + 1 +---------------------------------------------------------------------------- +| 02 | register +---------------------------------------------------------------------------- +| 03 | 0x00 +---------------------------------------------------------------------------- +| 04 | 0x00 +---------------------------------------------------------------------------- +| 05 | 0x01 +---------------------------------------------------------------------------- +| 06-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET +============================================================================ +| 00 | 0xb1 register write command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04 | value +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET +============================================================================ +| 00 | 0xb0 register read command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | LED CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x01 (LED) +---------------------------------------------------------------------------- +| 03 | 0x00 blink +| | 0x01 lights continuously +---------------------------------------------------------------------------- +| 04 | blink interval +| | 0x00 fastest (looks like LED lights continuously) +| | 0xff slowest +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | IR CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x02 (IR) +---------------------------------------------------------------------------- +| 03 | 0x00 IR disabled +| | 0x01 IR enabled +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | STREAMING CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x12 streaming control command +---------------------------------------------------------------------------- +| 01 | 0x00 streaming disabled +| | 0x01 streaming enabled +---------------------------------------------------------------------------- +| 02 | 0x00 +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x41 remote control command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REPLY PACKET +============================================================================ +| 00 | 0x00 code not received +| | 0x01 code received +---------------------------------------------------------------------------- +| 01 | remote control code +---------------------------------------------------------------------------- +| 02-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REQUEST PACKET +============================================================================ +| 00 | 0x19 get hardware info command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REPLY PACKET +============================================================================ +| 00 | hardware id +---------------------------------------------------------------------------- +| 01-02 | firmware version +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | SMART CARD READER PACKET +============================================================================ +| 00 | 0x34 smart card reader command +---------------------------------------------------------------------------- +| xx | +---------------------------------------------------------------------------- +| xx-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +*/ diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c index 2ccb90fa60c..eb34cc3894e 100644 --- a/drivers/media/dvb/dvb-usb/au6610.c +++ b/drivers/media/dvb/dvb-usb/au6610.c @@ -1,24 +1,31 @@ -/* DVB USB compliant linux driver for Sigmatek DVB-110 DVB-T USB2.0 receiver +/* + * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. * * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * see Documentation/dvb/README.dvb-usb for more information + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "au6610.h" - #include "zl10353.h" #include "qt1010.h" /* debug */ static int dvb_usb_au6610_debug; module_param_named(debug, dvb_usb_au6610_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); - +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, @@ -42,9 +49,8 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, } ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation, - USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, usb_buf, - sizeof(usb_buf), AU6610_USB_TIMEOUT); - + USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, + usb_buf, sizeof(usb_buf), AU6610_USB_TIMEOUT); if (ret < 0) return ret; @@ -116,15 +122,6 @@ static struct i2c_algorithm au6610_i2c_algo = { }; /* Callbacks for DVB USB */ -static int au6610_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = 0; - return 0; -} - static struct zl10353_config au6610_zl10353_config = { .demod_address = 0x0f, .no_tuner = 1, @@ -133,12 +130,12 @@ static struct zl10353_config au6610_zl10353_config = { static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap) { - if ((adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, - &adap->dev->i2c_adap)) != NULL) { - return 0; - } + adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe == NULL) + return -ENODEV; - return -EIO; + return 0; } static struct qt1010_config au6610_qt1010_config = { @@ -171,7 +168,7 @@ static int au6610_probe(struct usb_interface *intf, alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING); if (alt == NULL) { - deb_rc("no alt found!\n"); + deb_info("%s: no alt found!\n", __func__); return -ENODEV; } ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, @@ -181,18 +178,19 @@ static int au6610_probe(struct usb_interface *intf, return ret; } - static struct usb_device_id au6610_table [] = { { USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, au6610_table); +MODULE_DEVICE_TABLE(usb, au6610_table); static struct dvb_usb_device_properties au6610_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, - .size_of_priv = 0, - .identify_state = au6610_identify_state, + + .size_of_priv = 0, + .num_adapters = 1, .adapter = { { @@ -206,20 +204,22 @@ static struct dvb_usb_device_properties au6610_properties = { .u = { .isoc = { .framesperurb = 40, - .framesize = 942, /* maximum packet size */ - .interval = 1.25, /* 125 us */ + .framesize = 942, + .interval = 1, } } }, } }, + .i2c_algo = &au6610_i2c_algo, + .num_device_descs = 1, .devices = { { - "Sigmatek DVB-110 DVB-T USB2.0", - { &au6610_table[0], NULL }, - { NULL }, + .name = "Sigmatek DVB-110 DVB-T USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&au6610_table[0], NULL}, }, } }; @@ -236,12 +236,11 @@ static int __init au6610_module_init(void) { int ret; - if ((ret = usb_register(&au6610_driver))) { + ret = usb_register(&au6610_driver); + if (ret) err("usb_register failed. Error number %d", ret); - return ret; - } - return 0; + return ret; } static void __exit au6610_module_exit(void) @@ -250,10 +249,10 @@ static void __exit au6610_module_exit(void) usb_deregister(&au6610_driver); } -module_init (au6610_module_init); -module_exit (au6610_module_exit); +module_init(au6610_module_init); +module_exit(au6610_module_exit); MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Driver Sigmatek DVB-110 DVB-T USB2.0 / AU6610"); +MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/au6610.h b/drivers/media/dvb/dvb-usb/au6610.h index 4161b054c71..7849abe2c61 100644 --- a/drivers/media/dvb/dvb-usb/au6610.h +++ b/drivers/media/dvb/dvb-usb/au6610.h @@ -1,10 +1,30 @@ +/* + * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. + * + * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + #ifndef _DVB_USB_AU6610_H_ #define _DVB_USB_AU6610_H_ #define DVB_USB_LOG_PREFIX "au6610" #include "dvb-usb.h" -#define deb_rc(args...) dprintk(dvb_usb_au6610_debug,0x01,args) +#define deb_info(args...) dprintk(dvb_usb_au6610_debug, 0x01, args) #define AU6610_REQ_I2C_WRITE 0x14 #define AU6610_REQ_I2C_READ 0x13 diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 0286156704f..578afce6884 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -35,6 +35,7 @@ #include "zl10353.h" #include "tuner-xc2028.h" #include "tuner-simple.h" +#include "mxl5005s.h" /* debug */ static int dvb_usb_cxusb_debug; @@ -43,9 +44,8 @@ MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_ST DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -#define deb_info(args...) dprintk(dvb_usb_cxusb_debug,0x01,args) -#define deb_i2c(args...) if (d->udev->descriptor.idVendor == USB_VID_MEDION) \ - dprintk(dvb_usb_cxusb_debug,0x01,args) +#define deb_info(args...) dprintk(dvb_usb_cxusb_debug, 0x03, args) +#define deb_i2c(args...) dprintk(dvb_usb_cxusb_debug, 0x02, args) static int cxusb_ctrl_msg(struct dvb_usb_device *d, u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) @@ -202,6 +202,46 @@ static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0); } +static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + if (!onoff) + return cxusb_ctrl_msg(d, CMD_POWER_OFF, NULL, 0, NULL, 0); + if (d->state == DVB_USB_STATE_INIT && + usb_set_interface(d->udev, 0, 0) < 0) + err("set interface failed"); + do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) && + !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) && + !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0); + if (!ret) { + /* FIXME: We don't know why, but we need to configure the + * lgdt3303 with the register settings below on resume */ + int i; + u8 buf, bufs[] = { + 0x0e, 0x2, 0x00, 0x7f, + 0x0e, 0x2, 0x02, 0xfe, + 0x0e, 0x2, 0x02, 0x01, + 0x0e, 0x2, 0x00, 0x03, + 0x0e, 0x2, 0x0d, 0x40, + 0x0e, 0x2, 0x0e, 0x87, + 0x0e, 0x2, 0x0f, 0x8e, + 0x0e, 0x2, 0x10, 0x01, + 0x0e, 0x2, 0x14, 0xd7, + 0x0e, 0x2, 0x47, 0x88, + }; + msleep(20); + for (i = 0; i < sizeof(bufs)/sizeof(u8); i += 4/sizeof(u8)) { + ret = cxusb_ctrl_msg(d, CMD_I2C_WRITE, + bufs+i, 4, &buf, 1); + if (ret) + break; + if (buf != 0x8) + return -EREMOTEIO; + } + } + return ret; +} + static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff) { u8 b = 0; @@ -233,6 +273,16 @@ static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return 0; } +static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + if (onoff) + cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_ON, NULL, 0, NULL, 0); + else + cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_OFF, + NULL, 0, NULL, 0); + return 0; +} + static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { struct dvb_usb_rc_key *keymap = d->props.rc_key_map; @@ -423,6 +473,12 @@ static struct lgdt330x_config cxusb_lgdt3303_config = { .demod_chip = LGDT3303, }; +static struct lgdt330x_config cxusb_aver_lgdt3303_config = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .clock_polarity_flip = 2, +}; + static struct mt352_config cxusb_dee1601_config = { .demod_address = 0x0f, .demod_init = cxusb_dee1601_demod_init, @@ -453,6 +509,24 @@ static struct mt352_config cxusb_mt352_xc3028_config = { .demod_init = cxusb_mt352_demod_init, }; +/* FIXME: needs tweaking */ +static struct mxl5005s_config aver_a868r_tuner = { + .i2c_address = 0x63, + .if_freq = 6000000UL, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + /* Callbacks for DVB USB */ static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) { @@ -533,6 +607,13 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) return 0; } +static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(mxl5005s_attach, adap->fe, + &adap->dev->i2c_adap, &aver_a868r_tuner); + return 0; +} + static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap) { u8 b; @@ -562,6 +643,16 @@ static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) return -EIO; } +static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) +{ + adap->fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) + return 0; + + return -EIO; +} + static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap) { /* used in both lgz201 and th7579 */ @@ -736,6 +827,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties; static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties; +static struct dvb_usb_device_properties cxusb_aver_a868r_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -756,7 +848,10 @@ static int cxusb_probe(struct usb_interface *intf, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_needsfirmware_properties, - THIS_MODULE, NULL, adapter_nr)) + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, + THIS_MODULE, NULL, adapter_nr) || + 0) return 0; return -EINVAL; @@ -779,6 +874,7 @@ static struct usb_device_id cxusb_table [] = { { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) }, { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) }, { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) }, + { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) }, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, cxusb_table); @@ -1182,6 +1278,48 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope } }; +static struct dvb_usb_device_properties cxusb_aver_a868r_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = cxusb_aver_streaming_ctrl, + .frontend_attach = cxusb_aver_lgdt3303_frontend_attach, + .tuner_attach = cxusb_mxl5003s_tuner_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x04, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + + }, + }, + .power_ctrl = cxusb_aver_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "AVerMedia AVerTVHD Volar (A868R)", + { NULL }, + { &cxusb_table[16], NULL }, + }, + } +}; + static struct usb_driver cxusb_driver = { .name = "dvb_usb_cxusb", .probe = cxusb_probe, diff --git a/drivers/media/dvb/dvb-usb/cxusb.h b/drivers/media/dvb/dvb-usb/cxusb.h index 4768a2c3551..1a51eafd31b 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.h +++ b/drivers/media/dvb/dvb-usb/cxusb.h @@ -20,6 +20,9 @@ #define CMD_STREAMING_ON 0x36 #define CMD_STREAMING_OFF 0x37 +#define CMD_AVER_STREAM_ON 0x18 +#define CMD_AVER_STREAM_OFF 0x19 + #define CMD_GET_IR_CODE 0x47 #define CMD_ANALOG 0x50 diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index c4d40fe01d5..3dd20bfbed3 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1117,6 +1117,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) }, { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) }, { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1372,7 +1373,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { } }, - .num_device_descs = 2, + .num_device_descs = 3, .devices = { { "DiBcom STK7070PD reference design", { &dib0700_usb_id_table[17], NULL }, @@ -1381,6 +1382,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Pinnacle PCTV Dual DVB-T Diversity Stick", { &dib0700_usb_id_table[18], NULL }, { NULL }, + }, + { "Hauppauge Nova-TD Stick (52009)", + { &dib0700_usb_id_table[35], NULL }, + { NULL }, } } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c index 23428cd3075..326f7608954 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c @@ -20,11 +20,7 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d) } strncpy(d->i2c_adap.name, d->desc->name, sizeof(d->i2c_adap.name)); -#ifdef I2C_ADAP_CLASS_TV_DIGITAL - d->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL, -#else d->i2c_adap.class = I2C_CLASS_TV_DIGITAL, -#endif d->i2c_adap.algo = d->props.i2c_algo; d->i2c_adap.algo_data = NULL; d->i2c_adap.dev.parent = &d->udev->dev; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 34245d1b7dd..e5238b31e94 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -14,6 +14,7 @@ #define USB_VID_AFATECH 0x15a4 #define USB_VID_ALCOR_MICRO 0x058f #define USB_VID_ALINK 0x05e3 +#define USB_VID_AMT 0x1c73 #define USB_VID_ANCHOR 0x0547 #define USB_VID_ANSONIC 0x10b9 #define USB_VID_ANUBIS_ELECTRONIC 0x10fd @@ -57,6 +58,7 @@ #define USB_PID_AFATECH_AF9005 0x9020 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 +#define USB_PID_ANYSEE 0x861f #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 @@ -132,9 +134,15 @@ #define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070 #define USB_PID_HAUPPAUGE_MYTV_T 0x7080 #define USB_PID_HAUPPAUGE_NOVA_TD_STICK 0x9580 +#define USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009 0x5200 #define USB_PID_AVERMEDIA_EXPRESS 0xb568 #define USB_PID_AVERMEDIA_VOLAR 0xa807 #define USB_PID_AVERMEDIA_VOLAR_2 0xb808 +#define USB_PID_AVERMEDIA_VOLAR_A868R 0xa868 +#define USB_PID_AVERMEDIA_MCE_USB_M038 0x1228 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R 0x0039 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC 0x1039 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT 0x2039 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c index 037f7ffb47b..6f596ed4176 100644 --- a/drivers/media/dvb/dvb-usb/gl861.c +++ b/drivers/media/dvb/dvb-usb/gl861.c @@ -1,8 +1,8 @@ /* DVB USB compliant linux driver for GL861 USB2.0 devices. * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. * * see Documentation/dvb/README.dvb-usb for more information */ @@ -13,9 +13,9 @@ /* debug */ static int dvb_usb_gl861_debug; -module_param_named(debug,dvb_usb_gl861_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); - +module_param_named(debug, dvb_usb_gl861_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." + DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, @@ -70,7 +70,7 @@ static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], /* write/read request */ if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, - msg[i].len, msg[i+1].buf, msg[i+1].len) < 0) + msg[i].len, msg[i+1].buf, msg[i+1].len) < 0) break; i++; } else @@ -102,12 +102,13 @@ static struct zl10353_config gl861_zl10353_config = { static int gl861_frontend_attach(struct dvb_usb_adapter *adap) { - if ((adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config, - &adap->dev->i2c_adap)) != NULL) { - return 0; - } - return -EIO; + adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe == NULL) + return -EIO; + + return 0; } static struct qt1010_config gl861_qt1010_config = { @@ -156,7 +157,7 @@ static struct usb_device_id gl861_table [] = { { USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, gl861_table); +MODULE_DEVICE_TABLE(usb, gl861_table); static struct dvb_usb_device_properties gl861_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, @@ -180,7 +181,7 @@ static struct dvb_usb_device_properties gl861_properties = { } } }, - }}, + } }, .i2c_algo = &gl861_i2c_algo, .num_device_descs = 2, @@ -210,12 +211,11 @@ static int __init gl861_module_init(void) { int ret; - if ((ret = usb_register(&gl861_driver))) { + ret = usb_register(&gl861_driver); + if (ret) err("usb_register failed. Error number %d", ret); - return ret; - } - return 0; + return ret; } static void __exit gl861_module_exit(void) @@ -224,8 +224,8 @@ static void __exit gl861_module_exit(void) usb_deregister(&gl861_driver); } -module_init (gl861_module_init); -module_exit (gl861_module_exit); +module_init(gl861_module_init); +module_exit(gl861_module_exit); MODULE_AUTHOR("Carl Lundqvist <comabug@gmail.com>"); MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / GL861"); diff --git a/drivers/media/dvb/dvb-usb/gl861.h b/drivers/media/dvb/dvb-usb/gl861.h index 72a51afd5ee..c54855e2c23 100644 --- a/drivers/media/dvb/dvb-usb/gl861.h +++ b/drivers/media/dvb/dvb-usb/gl861.h @@ -4,7 +4,7 @@ #define DVB_USB_LOG_PREFIX "gl861" #include "dvb-usb.h" -#define deb_rc(args...) dprintk(dvb_usb_gl861_debug,0x01,args) +#define deb_rc(args...) dprintk(dvb_usb_gl861_debug, 0x01, args) #define GL861_WRITE 0x40 #define GL861_READ 0xc0 |