summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/frontends/cx24110.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/frontends/cx24110.c')
-rw-r--r--drivers/media/dvb/frontends/cx24110.c22
1 files changed, 11 insertions, 11 deletions
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index ecd056e951f..d15d32c51dc 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -55,7 +55,7 @@ static int debug;
static struct {u8 reg; u8 data;} cx24110_regdata[]=
/* Comments beginning with @ denote this value should
- be the default */
+ be the default */
{{0x09,0x01}, /* SoftResetAll */
{0x09,0x00}, /* release reset */
{0x01,0xe8}, /* MSB of code rate 27.5MS/s */
@@ -66,26 +66,26 @@ static struct {u8 reg; u8 data;} cx24110_regdata[]=
{0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
{0x0a,0x00}, /* @ partial chip disables, do not set */
{0x0b,0x01}, /* set output clock in gapped mode, start signal low
- active for first byte */
+ active for first byte */
{0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
{0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
{0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
- to avoid starting the BER counter. Reset the
- CRC test bit. Finite counting selected */
+ to avoid starting the BER counter. Reset the
+ CRC test bit. Finite counting selected */
{0x15,0xff}, /* @ size of the limited time window for RS BER
- estimation. It is <value>*256 RS blocks, this
- gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
+ estimation. It is <value>*256 RS blocks, this
+ gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
{0x16,0x00}, /* @ enable all RS output ports */
{0x17,0x04}, /* @ time window allowed for the RS to sync */
{0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
- for automatically */
+ for automatically */
/* leave the current code rate and normalization
- registers as they are after reset... */
+ registers as they are after reset... */
{0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
- only once */
+ only once */
{0x23,0x18}, /* @ size of the limited time window for Viterbi BER
- estimation. It is <value>*65536 channel bits, i.e.
- approx. 38ms at 27.5MS/s, rate 3/4 */
+ estimation. It is <value>*65536 channel bits, i.e.
+ approx. 38ms at 27.5MS/s, rate 3/4 */
{0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
/* leave front-end AGC parameters at default values */
/* leave decimation AGC parameters at default values */