diff options
Diffstat (limited to 'drivers/media/dvb/frontends/cx24116.c')
| -rw-r--r-- | drivers/media/dvb/frontends/cx24116.c | 1508 |
1 files changed, 0 insertions, 1508 deletions
diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c deleted file mode 100644 index b4887918653..00000000000 --- a/drivers/media/dvb/frontends/cx24116.c +++ /dev/null @@ -1,1508 +0,0 @@ -/* - Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver - - Copyright (C) 2006-2008 Steven Toth <stoth@hauppauge.com> - Copyright (C) 2006-2007 Georg Acher - Copyright (C) 2007-2008 Darron Broad - March 2007 - Fixed some bugs. - Added diseqc support. - Added corrected signal strength support. - August 2007 - Sync with legacy version. - Some clean ups. - Copyright (C) 2008 Igor Liplianin - September, 9th 2008 - Fixed locking on high symbol rates (>30000). - Implement MPEG initialization parameter. - January, 17th 2009 - Fill set_voltage with actually control voltage code. - Correct set tone to not affect voltage. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/firmware.h> - -#include "dvb_frontend.h" -#include "cx24116.h" - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); - -#define dprintk(args...) \ - do { \ - if (debug) \ - printk(KERN_INFO "cx24116: " args); \ - } while (0) - -#define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw" -#define CX24116_SEARCH_RANGE_KHZ 5000 - -/* known registers */ -#define CX24116_REG_COMMAND (0x00) /* command args 0x00..0x1e */ -#define CX24116_REG_EXECUTE (0x1f) /* execute command */ -#define CX24116_REG_MAILBOX (0x96) /* FW or multipurpose mailbox? */ -#define CX24116_REG_RESET (0x20) /* reset status > 0 */ -#define CX24116_REG_SIGNAL (0x9e) /* signal low */ -#define CX24116_REG_SSTATUS (0x9d) /* signal high / status */ -#define CX24116_REG_QUALITY8 (0xa3) -#define CX24116_REG_QSTATUS (0xbc) -#define CX24116_REG_QUALITY0 (0xd5) -#define CX24116_REG_BER0 (0xc9) -#define CX24116_REG_BER8 (0xc8) -#define CX24116_REG_BER16 (0xc7) -#define CX24116_REG_BER24 (0xc6) -#define CX24116_REG_UCB0 (0xcb) -#define CX24116_REG_UCB8 (0xca) -#define CX24116_REG_CLKDIV (0xf3) -#define CX24116_REG_RATEDIV (0xf9) - -/* configured fec (not tuned) or actual FEC (tuned) 1=1/2 2=2/3 etc */ -#define CX24116_REG_FECSTATUS (0x9c) - -/* FECSTATUS bits */ -/* mask to determine configured fec (not tuned) or actual fec (tuned) */ -#define CX24116_FEC_FECMASK (0x1f) - -/* Select DVB-S demodulator, else DVB-S2 */ -#define CX24116_FEC_DVBS (0x20) -#define CX24116_FEC_UNKNOWN (0x40) /* Unknown/unused */ - -/* Pilot mode requested when tuning else always reset when tuned */ -#define CX24116_FEC_PILOT (0x80) - -/* arg buffer size */ -#define CX24116_ARGLEN (0x1e) - -/* rolloff */ -#define CX24116_ROLLOFF_020 (0x00) -#define CX24116_ROLLOFF_025 (0x01) -#define CX24116_ROLLOFF_035 (0x02) - -/* pilot bit */ -#define CX24116_PILOT_OFF (0x00) -#define CX24116_PILOT_ON (0x40) - -/* signal status */ -#define CX24116_HAS_SIGNAL (0x01) -#define CX24116_HAS_CARRIER (0x02) -#define CX24116_HAS_VITERBI (0x04) -#define CX24116_HAS_SYNCLOCK (0x08) -#define CX24116_HAS_UNKNOWN1 (0x10) -#define CX24116_HAS_UNKNOWN2 (0x20) -#define CX24116_STATUS_MASK (0x0f) -#define CX24116_SIGNAL_MASK (0xc0) - -#define CX24116_DISEQC_TONEOFF (0) /* toneburst never sent */ -#define CX24116_DISEQC_TONECACHE (1) /* toneburst cached */ -#define CX24116_DISEQC_MESGCACHE (2) /* message cached */ - -/* arg offset for DiSEqC */ -#define CX24116_DISEQC_BURST (1) -#define CX24116_DISEQC_ARG2_2 (2) /* unknown value=2 */ -#define CX24116_DISEQC_ARG3_0 (3) /* unknown value=0 */ -#define CX24116_DISEQC_ARG4_0 (4) /* unknown value=0 */ -#define CX24116_DISEQC_MSGLEN (5) -#define CX24116_DISEQC_MSGOFS (6) - -/* DiSEqC burst */ -#define CX24116_DISEQC_MINI_A (0) -#define CX24116_DISEQC_MINI_B (1) - -/* DiSEqC tone burst */ -static int toneburst = 1; -module_param(toneburst, int, 0644); -MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, "\ - "2=MESSAGE CACHE (default:1)"); - -/* SNR measurements */ -static int esno_snr; -module_param(esno_snr, int, 0644); -MODULE_PARM_DESC(esno_snr, "SNR return units, 0=PERCENTAGE 0-100, "\ - "1=ESNO(db * 10) (default:0)"); - -enum cmds { - CMD_SET_VCO = 0x10, - CMD_TUNEREQUEST = 0x11, - CMD_MPEGCONFIG = 0x13, - CMD_TUNERINIT = 0x14, - CMD_BANDWIDTH = 0x15, - CMD_GETAGC = 0x19, - CMD_LNBCONFIG = 0x20, - CMD_LNBSEND = 0x21, /* Formerly CMD_SEND_DISEQC */ - CMD_LNBDCLEVEL = 0x22, - CMD_SET_TONE = 0x23, - CMD_UPDFWVERS = 0x35, - CMD_TUNERSLEEP = 0x36, - CMD_AGCCONTROL = 0x3b, /* Unknown */ -}; - -/* The Demod/Tuner can't easily provide these, we cache them */ -struct cx24116_tuning { - u32 frequency; - u32 symbol_rate; - fe_spectral_inversion_t inversion; - fe_code_rate_t fec; - - fe_delivery_system_t delsys; - fe_modulation_t modulation; - fe_pilot_t pilot; - fe_rolloff_t rolloff; - - /* Demod values */ - u8 fec_val; - u8 fec_mask; - u8 inversion_val; - u8 pilot_val; - u8 rolloff_val; -}; - -/* Basic commands that are sent to the firmware */ -struct cx24116_cmd { - u8 len; - u8 args[CX24116_ARGLEN]; -}; - -struct cx24116_state { - struct i2c_adapter *i2c; - const struct cx24116_config *config; - - struct dvb_frontend frontend; - - struct cx24116_tuning dcur; - struct cx24116_tuning dnxt; - - u8 skip_fw_load; - u8 burst; - struct cx24116_cmd dsec_cmd; -}; - -static int cx24116_writereg(struct cx24116_state *state, int reg, int data) -{ - u8 buf[] = { reg, data }; - struct i2c_msg msg = { .addr = state->config->demod_address, - .flags = 0, .buf = buf, .len = 2 }; - int err; - - if (debug > 1) - printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n", - __func__, reg, data); - - err = i2c_transfer(state->i2c, &msg, 1); - if (err != 1) { - printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x," - " value == 0x%02x)\n", __func__, err, reg, data); - return -EREMOTEIO; - } - - return 0; -} - -/* Bulk byte writes to a single I2C address, for 32k firmware load */ -static int cx24116_writeregN(struct cx24116_state *state, int reg, - const u8 *data, u16 len) -{ - int ret = -EREMOTEIO; - struct i2c_msg msg; - u8 *buf; - - buf = kmalloc(len + 1, GFP_KERNEL); - if (buf == NULL) { - printk("Unable to kmalloc\n"); - ret = -ENOMEM; - goto error; - } - - *(buf) = reg; - memcpy(buf + 1, data, len); - - msg.addr = state->config->demod_address; - msg.flags = 0; - msg.buf = buf; - msg.len = len + 1; - - if (debug > 1) - printk(KERN_INFO "cx24116: %s: write regN 0x%02x, len = %d\n", - __func__, reg, len); - - ret = i2c_transfer(state->i2c, &msg, 1); - if (ret != 1) { - printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x\n", - __func__, ret, reg); - ret = -EREMOTEIO; - } - -error: - kfree(buf); - - return ret; -} - -static int cx24116_readreg(struct cx24116_state *state, u8 reg) -{ - int ret; - u8 b0[] = { reg }; - u8 b1[] = { 0 }; - struct i2c_msg msg[] = { - { .addr = state->config->demod_address, .flags = 0, - .buf = b0, .len = 1 }, - { .addr = state->config->demod_address, .flags = I2C_M_RD, - .buf = b1, .len = 1 } - }; - - ret = i2c_transfer(state->i2c, msg, 2); - - if (ret != 2) { - printk(KERN_ERR "%s: reg=0x%x (error=%d)\n", - __func__, reg, ret); - return ret; - } - - if (debug > 1) - printk(KERN_INFO "cx24116: read reg 0x%02x, value 0x%02x\n", - reg, b1[0]); - - return b1[0]; -} - -static int cx24116_set_inversion(struct cx24116_state *state, - fe_spectral_inversion_t inversion) -{ - dprintk("%s(%d)\n", __func__, inversion); - - switch (inversion) { - case INVERSION_OFF: - state->dnxt.inversion_val = 0x00; - break; - case INVERSION_ON: - state->dnxt.inversion_val = 0x04; - break; - case INVERSION_AUTO: - state->dnxt.inversion_val = 0x0C; - break; - default: - return -EINVAL; - } - - state->dnxt.inversion = inversion; - - return 0; -} - -/* - * modfec (modulation and FEC) - * =========================== - * - * MOD FEC mask/val standard - * ---- -------- ----------- -------- - * QPSK FEC_1_2 0x02 0x02+X DVB-S - * QPSK FEC_2_3 0x04 0x02+X DVB-S - * QPSK FEC_3_4 0x08 0x02+X DVB-S - * QPSK FEC_4_5 0x10 0x02+X DVB-S (?) - * QPSK FEC_5_6 0x20 0x02+X DVB-S - * QPSK FEC_6_7 0x40 0x02+X DVB-S - * QPSK FEC_7_8 0x80 0x02+X DVB-S - * QPSK FEC_8_9 0x01 0x02+X DVB-S (?) (NOT SUPPORTED?) - * QPSK AUTO 0xff 0x02+X DVB-S - * - * For DVB-S high byte probably represents FEC - * and low byte selects the modulator. The high - * byte is search range mask. Bit 5 may turn - * on DVB-S and remaining bits represent some - * kind of calibration (how/what i do not know). - * - * Eg.(2/3) szap "Zone Horror" - * - * mask/val = 0x04, 0x20 - * status 1f | signal c3c0 | snr a333 | ber 00000098 | unc 0 | FE_HAS_LOCK - * - * mask/val = 0x04, 0x30 - * status 1f | signal c3c0 | snr a333 | ber 00000000 | unc 0 | FE_HAS_LOCK - * - * After tuning FECSTATUS contains actual FEC - * in use numbered 1 through to 8 for 1/2 .. 2/3 etc - * - * NBC=NOT/NON BACKWARD COMPATIBLE WITH DVB-S (DVB-S2 only) - * - * NBC-QPSK FEC_1_2 0x00, 0x04 DVB-S2 - * NBC-QPSK FEC_3_5 0x00, 0x05 DVB-S2 - * NBC-QPSK FEC_2_3 0x00, 0x06 DVB-S2 - * NBC-QPSK FEC_3_4 0x00, 0x07 DVB-S2 - * NBC-QPSK FEC_4_5 0x00, 0x08 DVB-S2 - * NBC-QPSK FEC_5_6 0x00, 0x09 DVB-S2 - * NBC-QPSK FEC_8_9 0x00, 0x0a DVB-S2 - * NBC-QPSK FEC_9_10 0x00, 0x0b DVB-S2 - * - * NBC-8PSK FEC_3_5 0x00, 0x0c DVB-S2 - * NBC-8PSK FEC_2_3 0x00, 0x0d DVB-S2 - * NBC-8PSK FEC_3_4 0x00, 0x0e DVB-S2 - * NBC-8PSK FEC_5_6 0x00, 0x0f DVB-S2 - * NBC-8PSK FEC_8_9 0x00, 0x10 DVB-S2 - * NBC-8PSK FEC_9_10 0x00, 0x11 DVB-S2 - * - * For DVB-S2 low bytes selects both modulator - * and FEC. High byte is meaningless here. To - * set pilot, bit 6 (0x40) is set. When inspecting - * FECSTATUS bit 7 (0x80) represents the pilot - * selection whilst not tuned. When tuned, actual FEC - * in use is found in FECSTATUS as per above. Pilot - * value is reset. - */ - -/* A table of modulation, fec and configuration bytes for the demod. - * Not all S2 mmodulation schemes are support and not all rates with - * a scheme are support. Especially, no auto detect when in S2 mode. - */ -static struct cx24116_modfec { - fe_delivery_system_t delivery_system; - fe_modulation_t modulation; - fe_code_rate_t fec; - u8 mask; /* In DVBS mode this is used to autodetect */ - u8 val; /* Passed to the firmware to indicate mode selection */ -} CX24116_MODFEC_MODES[] = { - /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */ - - /*mod fec mask val */ - { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 }, - { SYS_DVBS, QPSK, FEC_1_2, 0x02, 0x2e }, /* 00000010 00101110 */ - { SYS_DVBS, QPSK, FEC_2_3, 0x04, 0x2f }, /* 00000100 00101111 */ - { SYS_DVBS, QPSK, FEC_3_4, 0x08, 0x30 }, /* 00001000 00110000 */ - { SYS_DVBS, QPSK, FEC_4_5, 0xfe, 0x30 }, /* 000?0000 ? */ - { SYS_DVBS, QPSK, FEC_5_6, 0x20, 0x31 }, /* 00100000 00110001 */ - { SYS_DVBS, QPSK, FEC_6_7, 0xfe, 0x30 }, /* 0?000000 ? */ - { SYS_DVBS, QPSK, FEC_7_8, 0x80, 0x32 }, /* 10000000 00110010 */ - { SYS_DVBS, QPSK, FEC_8_9, 0xfe, 0x30 }, /* 0000000? ? */ - { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 }, - /* NBC-QPSK */ - { SYS_DVBS2, QPSK, FEC_1_2, 0x00, 0x04 }, - { SYS_DVBS2, QPSK, FEC_3_5, 0x00, 0x05 }, - { SYS_DVBS2, QPSK, FEC_2_3, 0x00, 0x06 }, - { SYS_DVBS2, QPSK, FEC_3_4, 0x00, 0x07 }, - { SYS_DVBS2, QPSK, FEC_4_5, 0x00, 0x08 }, - { SYS_DVBS2, QPSK, FEC_5_6, 0x00, 0x09 }, - { SYS_DVBS2, QPSK, FEC_8_9, 0x00, 0x0a }, - { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b }, - /* 8PSK */ - { SYS_DVBS2, PSK_8, FEC_3_5, 0x00, 0x0c }, - { SYS_DVBS2, PSK_8, FEC_2_3, 0x00, 0x0d }, - { SYS_DVBS2, PSK_8, FEC_3_4, 0x00, 0x0e }, - { SYS_DVBS2, PSK_8, FEC_5_6, 0x00, 0x0f }, - { SYS_DVBS2, PSK_8, FEC_8_9, 0x00, 0x10 }, - { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 }, - /* - * `val' can be found in the FECSTATUS register when tuning. - * FECSTATUS will give the actual FEC in use if tuning was successful. - */ -}; - -static int cx24116_lookup_fecmod(struct cx24116_state *state, - fe_delivery_system_t d, fe_modulation_t m, fe_code_rate_t f) -{ - int i, ret = -EOPNOTSUPP; - - dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f); - - for (i = 0; i < ARRAY_SIZE(CX24116_MODFEC_MODES); i++) { - if ((d == CX24116_MODFEC_MODES[i].delivery_system) && - (m == CX24116_MODFEC_MODES[i].modulation) && - (f == CX24116_MODFEC_MODES[i].fec)) { - ret = i; - break; - } - } - - return ret; -} - -static int cx24116_set_fec(struct cx24116_state *state, - fe_delivery_system_t delsys, fe_modulation_t mod, fe_code_rate_t fec) -{ - int ret = 0; - - dprintk("%s(0x%02x,0x%02x)\n", __func__, mod, fec); - - ret = cx24116_lookup_fecmod(state, delsys, mod, fec); - - if (ret < 0) - return ret; - - state->dnxt.fec = fec; - state->dnxt.fec_val = CX24116_MODFEC_MODES[ret].val; - state->dnxt.fec_mask = CX24116_MODFEC_MODES[ret].mask; - dprintk("%s() mask/val = 0x%02x/0x%02x\n", __func__, - state->dnxt.fec_mask, state->dnxt.fec_val); - - return 0; -} - -static int cx24116_set_symbolrate(struct cx24116_state *state, u32 rate) -{ - dprintk("%s(%d)\n", __func__, rate); - - /* check if symbol rate is within limits */ - if ((rate > state->frontend.ops.info.symbol_rate_max) || - (rate < state->frontend.ops.info.symbol_rate_min)) { - dprintk("%s() unsupported symbol_rate = %d\n", __func__, rate); - return -EOPNOTSUPP; - } - - state->dnxt.symbol_rate = rate; - dprintk("%s() symbol_rate = %d\n", __func__, rate); - - return 0; -} - -static int cx24116_load_firmware(struct dvb_frontend *fe, - const struct firmware *fw); - -static int cx24116_firmware_ondemand(struct dvb_frontend *fe) -{ - struct cx24116_state *state = fe->demodulator_priv; - const struct firmware *fw; - int ret = 0; - - dprintk("%s()\n", __func__); - - if (cx24116_readreg(state, 0x20) > 0) { - - if (state->skip_fw_load) - return 0; - - /* Load firmware */ - /* request the firmware, this will block until loaded */ - printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", - __func__, CX24116_DEFAULT_FIRMWARE); - ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE, - state->i2c->dev.parent); - printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", - __func__); - if (ret) { - printk(KERN_ERR "%s: No firmware uploaded " - "(timeout or file not found?)\n", __func__); - return ret; - } - - /* Make sure we don't recurse back through here - * during loading */ - state->skip_fw_load = 1; - - ret = cx24116_load_firmware(fe, fw); - if (ret) - printk(KERN_ERR "%s: Writing firmware to device failed\n", - __func__); - - release_firmware(fw); - - printk(KERN_INFO "%s: Firmware upload %s\n", __func__, - ret == 0 ? "complete" : "failed"); - - /* Ensure firmware is always loaded if required */ - state->skip_fw_load = 0; - } - - return ret; -} - -/* Take a basic firmware command structure, format it - * and forward it for processing - */ -static int cx24116_cmd_execute(struct dvb_frontend *fe, struct cx24116_cmd *cmd) -{ - struct cx24116_state *state = fe->demodulator_priv; - int i, ret; - - dprintk("%s()\n", __func__); - - /* Load the firmware if required */ - ret = cx24116_firmware_ondemand(fe); - if (ret != 0) { - printk(KERN_ERR "%s(): Unable initialise the firmware\n", - __func__); - return ret; - } - - /* Write the command */ - for (i = 0; i < cmd->len ; i++) { - dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]); - cx24116_writereg(state, i, cmd->args[i]); - } - - /* Start execution and wait for cmd to terminate */ - cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01); - while (cx24116_readreg(state, CX24116_REG_EXECUTE)) { - msleep(10); - if (i++ > 64) { - /* Avoid looping forever if the firmware does - not respond */ - printk(KERN_WARNING "%s() Firmware not responding\n", - __func__); - return -EREMOTEIO; - } - } - return 0; -} - -static int cx24116_load_firmware(struct dvb_frontend *fe, - const struct firmware *fw) -{ - struct cx24116_state *state = fe->demodulator_priv; - struct cx24116_cmd cmd; - int i, ret, len, max, remaining; - unsigned char vers[4]; - - dprintk("%s\n", __func__); - dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n", - fw->size, - fw->data[0], - fw->data[1], - fw->data[fw->size-2], - fw->data[fw->size-1]); - - /* Toggle 88x SRST pin to reset demod */ - if (state->config->reset_device) - state->config->reset_device(fe); - - /* Begin the firmware load process */ - /* Prepare the demod, load the firmware, cleanup after load */ - - /* Init PLL */ - cx24116_writereg(state, 0xE5, 0x00); - cx24116_writereg(state, 0xF1, 0x08); - cx24116_writereg(state, 0xF2, 0x13); - - /* Start PLL */ - cx24116_writereg(state, 0xe0, 0x03); - cx24116_writereg(state, 0xe0, 0x00); - - /* Unknown */ - cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46); - cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); - - /* Unknown */ - cx24116_writereg(state, 0xF0, 0x03); - cx24116_writereg(state, 0xF4, 0x81); - cx24116_writereg(state, 0xF5, 0x00); - cx24116_writereg(state, 0xF6, 0x00); - - /* Split firmware to the max I2C write len and write. - * Writes whole firmware as one write when i2c_wr_max is set to 0. */ - if (state->config->i2c_wr_max) - max = state->config->i2c_wr_max; - else - max = INT_MAX; /* enough for 32k firmware */ - - for (remaining = fw->size; remaining > 0; remaining -= max - 1) { - len = remaining; - if (len > max - 1) - len = max - 1; - - cx24116_writeregN(state, 0xF7, &fw->data[fw->size - remaining], - len); - } - - cx24116_writereg(state, 0xF4, 0x10); - cx24116_writereg(state, 0xF0, 0x00); - cx24116_writereg(state, 0xF8, 0x06); - - /* Firmware CMD 10: VCO config */ - cmd.args[0x00] = CMD_SET_VCO; - cmd.args[0x01] = 0x05; - cmd.args[0x02] = 0xdc; - cmd.args[0x03] = 0xda; - cmd.args[0x04] = 0xae; - cmd.args[0x05] = 0xaa; - cmd.args[0x06] = 0x04; - cmd.args[0x07] = 0x9d; - cmd.args[0x08] = 0xfc; - cmd.args[0x09] = 0x06; - cmd.len = 0x0a; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - - cx24116_writereg(state, CX24116_REG_SSTATUS, 0x00); - - /* Firmware CMD 14: Tuner config */ - cmd.args[0x00] = CMD_TUNERINIT; - cmd.args[0x01] = 0x00; - cmd.args[0x02] = 0x00; - cmd.len = 0x03; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - - cx24116_writereg(state, 0xe5, 0x00); - - /* Firmware CMD 13: MPEG config */ - cmd.args[0x00] = CMD_MPEGCONFIG; - cmd.args[0x01] = 0x01; - cmd.args[0x02] = 0x75; - cmd.args[0x03] = 0x00; - if (state->config->mpg_clk_pos_pol) - cmd.args[0x04] = state->config->mpg_clk_pos_pol; - else - cmd.args[0x04] = 0x02; - cmd.args[0x05] = 0x00; - cmd.len = 0x06; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - - /* Firmware CMD 35: Get firmware version */ - cmd.args[0x00] = CMD_UPDFWVERS; - cmd.len = 0x02; - for (i = 0; i < 4; i++) { - cmd.args[0x01] = i; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - vers[i] = cx24116_readreg(state, CX24116_REG_MAILBOX); - } - printk(KERN_INFO "%s: FW version %i.%i.%i.%i\n", __func__, - vers[0], vers[1], vers[2], vers[3]); - - return 0; -} - -static int cx24116_read_status(struct dvb_frontend *fe, fe_status_t *status) -{ - struct cx24116_state *state = fe->demodulator_priv; - - int lock = cx24116_readreg(state, CX24116_REG_SSTATUS) & - CX24116_STATUS_MASK; - - dprintk("%s: status = 0x%02x\n", __func__, lock); - - *status = 0; - - if (lock & CX24116_HAS_SIGNAL) - *status |= FE_HAS_SIGNAL; - if (lock & CX24116_HAS_CARRIER) - *status |= FE_HAS_CARRIER; - if (lock & CX24116_HAS_VITERBI) - *status |= FE_HAS_VITERBI; - if (lock & CX24116_HAS_SYNCLOCK) - *status |= FE_HAS_SYNC | FE_HAS_LOCK; - - return 0; -} - -static int cx24116_read_ber(struct dvb_frontend *fe, u32 *ber) -{ - struct cx24116_state *state = fe->demodulator_priv; - - dprintk("%s()\n", __func__); - - *ber = (cx24116_readreg(state, CX24116_REG_BER24) << 24) | - (cx24116_readreg(state, CX24116_REG_BER16) << 16) | - (cx24116_readreg(state, CX24116_REG_BER8) << 8) | - cx24116_readreg(state, CX24116_REG_BER0); - - return 0; -} - -/* TODO Determine function and scale appropriately */ -static int cx24116_read_signal_strength(struct dvb_frontend *fe, - u16 *signal_strength) -{ - struct cx24116_state *state = fe->demodulator_priv; - struct cx24116_cmd cmd; - int ret; - u16 sig_reading; - - dprintk("%s()\n", __func__); - - /* Firmware CMD 19: Get AGC */ - cmd.args[0x00] = CMD_GETAGC; - cmd.len = 0x01; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - - sig_reading = - (cx24116_readreg(state, - CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK) | - (cx24116_readreg(state, CX24116_REG_SIGNAL) << 6); - *signal_strength = 0 - sig_reading; - - dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", - __func__, sig_reading, *signal_strength); - - return 0; -} - -/* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */ -static int cx24116_read_snr_pct(struct dvb_frontend *fe, u16 *snr) -{ - struct cx24116_state *state = fe->demodulator_priv; - u8 snr_reading; - static const u32 snr_tab[] = { /* 10 x Table (rounded up) */ - 0x00000, 0x0199A, 0x03333, 0x04ccD, 0x06667, - 0x08000, 0x0999A, 0x0b333, 0x0cccD, 0x0e667, - 0x10000, 0x1199A, 0x13333, 0x14ccD, 0x16667, - 0x18000 }; - - dprintk("%s()\n", __func__); - - snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0); - - if (snr_reading >= 0xa0 /* 100% */) - *snr = 0xffff; - else - *snr = snr_tab[(snr_reading & 0xf0) >> 4] + - (snr_tab[(snr_reading & 0x0f)] >> 4); - - dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, - snr_reading, *snr); - - return 0; -} - -/* The reelbox patches show the value in the registers represents - * ESNO, from 0->30db (values 0->300). We provide this value by - * default. - */ -static int cx24116_read_snr_esno(struct dvb_frontend *fe, u16 *snr) -{ - struct cx24116_state *state = fe->demodulator_priv; - - dprintk("%s()\n", __func__); - - *snr = cx24116_readreg(state, CX24116_REG_QUALITY8) << 8 | - cx24116_readreg(state, CX24116_REG_QUALITY0); - - dprintk("%s: raw 0x%04x\n", __func__, *snr); - - return 0; -} - -static int cx24116_read_snr(struct dvb_frontend *fe, u16 *snr) -{ - if (esno_snr == 1) - return cx24116_read_snr_esno(fe, snr); - else - return cx24116_read_snr_pct(fe, snr); -} - -static int cx24116_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) -{ - struct cx24116_state *state = fe->demodulator_priv; - - dprintk("%s()\n", __func__); - - *ucblocks = (cx24116_readreg(state, CX24116_REG_UCB8) << 8) | - cx24116_readreg(state, CX24116_REG_UCB0); - - return 0; -} - -/* Overwrite the current tuning params, we are about to tune */ -static void cx24116_clone_params(struct dvb_frontend *fe) -{ - struct cx24116_state *state = fe->demodulator_priv; - memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur)); -} - -/* Wait for LNB */ -static int cx24116_wait_for_lnb(struct dvb_frontend *fe) -{ - struct cx24116_state *state = fe->demodulator_priv; - int i; - - dprintk("%s() qstatus = 0x%02x\n", __func__, - cx24116_readreg(state, CX24116_REG_QSTATUS)); - - /* Wait for up to 300 ms */ - for (i = 0; i < 30 ; i++) { - if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20) - return 0; - msleep(10); - } - - dprintk("%s(): LNB not ready\n", __func__); - - return -ETIMEDOUT; /* -EBUSY ? */ -} - -static int cx24116_set_voltage(struct dvb_frontend *fe, - fe_sec_voltage_t voltage) -{ - struct cx24116_cmd cmd; - int ret; - - dprintk("%s: %s\n", __func__, - voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : - voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); - - /* Wait for LNB ready */ - ret = cx24116_wait_for_lnb(fe); - if (ret != 0) - return ret; - - /* Wait for voltage/min repeat delay */ - msleep(100); - - cmd.args[0x00] = CMD_LNBDCLEVEL; - cmd.args[0x01] = (voltage == SEC_VOLTAGE_18 ? 0x01 : 0x00); - cmd.len = 0x02; - - /* Min delay time before DiSEqC send */ - msleep(15); - - return cx24116_cmd_execute(fe, &cmd); -} - -static int cx24116_set_tone(struct dvb_frontend *fe, - fe_sec_tone_mode_t tone) -{ - struct cx24116_cmd cmd; - int ret; - - dprintk("%s(%d)\n", __func__, tone); - if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) { - printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone); - return -EINVAL; - } - - /* Wait for LNB ready */ - ret = cx24116_wait_for_lnb(fe); - if (ret != 0) - return ret; - - /* Min delay time after DiSEqC send */ - msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ - - /* Now we set the tone */ - cmd.args[0x00] = CMD_SET_TONE; - cmd.args[0x01] = 0x00; - cmd.args[0x02] = 0x00; - - switch (tone) { - case SEC_TONE_ON: - dprintk("%s: setting tone on\n", __func__); - cmd.args[0x03] = 0x01; - break; - case SEC_TONE_OFF: - dprintk("%s: setting tone off\n", __func__); - cmd.args[0x03] = 0x00; - break; - } - cmd.len = 0x04; - - /* Min delay time before DiSEqC send */ - msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ - - return cx24116_cmd_execute(fe, &cmd); -} - -/* Initialise DiSEqC */ -static int cx24116_diseqc_init(struct dvb_frontend *fe) -{ - struct cx24116_state *state = fe->demodulator_priv; - struct cx24116_cmd cmd; - int ret; - - /* Firmware CMD 20: LNB/DiSEqC config */ - cmd.args[0x00] = CMD_LNBCONFIG; - cmd.args[0x01] = 0x00; - cmd.args[0x02] = 0x10; - cmd.args[0x03] = 0x00; - cmd.args[0x04] = 0x8f; - cmd.args[0x05] = 0x28; - cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01; - cmd.args[0x07] = 0x01; - cmd.len = 0x08; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - - /* Prepare a DiSEqC command */ - state->dsec_cmd.args[0x00] = CMD_LNBSEND; - - /* DiSEqC burst */ - state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A; - - /* Unknown */ - state->dsec_cmd.args[CX24116_DISEQC_ARG2_2] = 0x02; - state->dsec_cmd.args[CX24116_DISEQC_ARG3_0] = 0x00; - /* Continuation flag? */ - state->dsec_cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; - - /* DiSEqC message length */ - state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00; - - /* Command length */ - state->dsec_cmd.len = CX24116_DISEQC_MSGOFS; - - return 0; -} - -/* Send DiSEqC message with derived burst (hack) || previous burst */ -static int cx24116_send_diseqc_msg(struct dvb_frontend *fe, - struct dvb_diseqc_master_cmd *d) -{ - struct cx24116_state *state = fe->demodulator_priv; - int i, ret; - - /* Dump DiSEqC message */ - if (debug) { - printk(KERN_INFO "cx24116: %s(", __func__); - for (i = 0 ; i < d->msg_len ;) { - printk(KERN_INFO "0x%02x", d->msg[i]); - if (++i < d->msg_len) - printk(KERN_INFO ", "); - } - printk(") toneburst=%d\n", toneburst); - } - - /* Validate length */ - if (d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS)) - return -EINVAL; - - /* DiSEqC message */ - for (i = 0; i < d->msg_len; i++) - state->dsec_cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i]; - - /* DiSEqC message length */ - state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len; - - /* Command length */ - state->dsec_cmd.len = CX24116_DISEQC_MSGOFS + - state->dsec_cmd.args[CX24116_DISEQC_MSGLEN]; - - /* DiSEqC toneburst */ - if (toneburst == CX24116_DISEQC_MESGCACHE) - /* Message is cached */ - return 0; - - else if (toneburst == CX24116_DISEQC_TONEOFF) - /* Message is sent without burst */ - state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0; - - else if (toneburst == CX24116_DISEQC_TONECACHE) { - /* - * Message is sent with derived else cached burst - * - * WRITE PORT GROUP COMMAND 38 - * - * 0/A/A: E0 10 38 F0..F3 - * 1/B/B: E0 10 38 F4..F7 - * 2/C/A: E0 10 38 F8..FB - * 3/D/B: E0 10 38 FC..FF - * - * databyte[3]= 8421:8421 - * ABCD:WXYZ - * CLR :SET - * - * WX= PORT SELECT 0..3 (X=TONEBURST) - * Y = VOLTAGE (0=13V, 1=18V) - * Z = BAND (0=LOW, 1=HIGH(22K)) - */ - if (d->msg_len >= 4 && d->msg[2] == 0x38) - state->dsec_cmd.args[CX24116_DISEQC_BURST] = - ((d->msg[3] & 4) >> 2); - if (debug) - dprintk("%s burst=%d\n", __func__, - state->dsec_cmd.args[CX24116_DISEQC_BURST]); - } - - /* Wait for LNB ready */ - ret = cx24116_wait_for_lnb(fe); - if (ret != 0) - return ret; - - /* Wait for voltage/min repeat delay */ - msleep(100); - - /* Command */ - ret = cx24116_cmd_execute(fe, &state->dsec_cmd); - if (ret != 0) - return ret; - /* - * Wait for send - * - * Eutelsat spec: - * >15ms delay + (XXX determine if FW does this, see set_tone) - * 13.5ms per byte + - * >15ms delay + - * 12.5ms burst + - * >15ms delay (XXX determine if FW does this, see set_tone) - */ - msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + - ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60)); - - return 0; -} - -/* Send DiSEqC burst */ -static int cx24116_diseqc_send_burst(struct dvb_frontend *fe, - fe_sec_mini_cmd_t burst) -{ - struct cx24116_state *state = fe->demodulator_priv; - int ret; - - dprintk("%s(%d) toneburst=%d\n", __func__, burst, toneburst); - - /* DiSEqC burst */ - if (burst == SEC_MINI_A) - state->dsec_cmd.args[CX24116_DISEQC_BURST] = - CX24116_DISEQC_MINI_A; - else if (burst == SEC_MINI_B) - state->dsec_cmd.args[CX24116_DISEQC_BURST] = - CX24116_DISEQC_MINI_B; - else - return -EINVAL; - - /* DiSEqC toneburst */ - if (toneburst != CX24116_DISEQC_MESGCACHE) - /* Burst is cached */ - return 0; - - /* Burst is to be sent with cached message */ - - /* Wait for LNB ready */ - ret = cx24116_wait_for_lnb(fe); - if (ret != 0) - return ret; - - /* Wait for voltage/min repeat delay */ - msleep(100); - - /* Command */ - ret = cx24116_cmd_execute(fe, &state->dsec_cmd); - if (ret != 0) - return ret; - - /* - * Wait for send - * - * Eutelsat spec: - * >15ms delay + (XXX determine if FW does this, see set_tone) - * 13.5ms per byte + - * >15ms delay + - * 12.5ms burst + - * >15ms delay (XXX determine if FW does this, see set_tone) - */ - msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60); - - return 0; -} - -static void cx24116_release(struct dvb_frontend *fe) -{ - struct cx24116_state *state = fe->demodulator_priv; - dprintk("%s\n", __func__); - kfree(state); -} - -static struct dvb_frontend_ops cx24116_ops; - -struct dvb_frontend *cx24116_attach(const struct cx24116_config *config, - struct i2c_adapter *i2c) -{ - struct cx24116_state *state = NULL; - int ret; - - dprintk("%s\n", __func__); - - /* allocate memory for the internal state */ - state = kzalloc(sizeof(struct cx24116_state), GFP_KERNEL); - if (state == NULL) - goto error1; - - state->config = config; - state->i2c = i2c; - - /* check if the demod is present */ - ret = (cx24116_readreg(state, 0xFF) << 8) | - cx24116_readreg(state, 0xFE); - if (ret != 0x0501) { - printk(KERN_INFO "Invalid probe, probably not a CX24116 device\n"); - goto error2; - } - - /* create dvb_frontend */ - memcpy(&state->frontend.ops, &cx24116_ops, - sizeof(struct dvb_frontend_ops)); - state->frontend.demodulator_priv = state; - return &state->frontend; - -error2: kfree(state); -error1: return NULL; -} -EXPORT_SYMBOL(cx24116_attach); - -/* - * Initialise or wake up device - * - * Power config will reset and load initial firmware if required - */ -static int cx24116_initfe(struct dvb_frontend *fe) -{ - struct cx24116_state *state = fe->demodulator_priv; - struct cx24116_cmd cmd; - int ret; - - dprintk("%s()\n", __func__); - - /* Power on */ - cx24116_writereg(state, 0xe0, 0); - cx24116_writereg(state, 0xe1, 0); - cx24116_writereg(state, 0xea, 0); - - /* Firmware CMD 36: Power config */ - cmd.args[0x00] = CMD_TUNERSLEEP; - cmd.args[0x01] = 0; - cmd.len = 0x02; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - - ret = cx24116_diseqc_init(fe); - if (ret != 0) - return ret; - - /* HVR-4000 needs this */ - return cx24116_set_voltage(fe, SEC_VOLTAGE_13); -} - -/* - * Put device to sleep - */ -static int cx24116_sleep(struct dvb_frontend *fe) -{ - struct cx24116_state *state = fe->demodulator_priv; - struct cx24116_cmd cmd; - int ret; - - dprintk("%s()\n", __func__); - - /* Firmware CMD 36: Power config */ - cmd.args[0x00] = CMD_TUNERSLEEP; - cmd.args[0x01] = 1; - cmd.len = 0x02; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - - /* Power off (Shutdown clocks) */ - cx24116_writereg(state, 0xea, 0xff); - cx24116_writereg(state, 0xe1, 1); - cx24116_writereg(state, 0xe0, 1); - - return 0; -} - -/* dvb-core told us to tune, the tv property cache will be complete, - * it's safe for is to pull values and use them for tuning purposes. - */ -static int cx24116_set_frontend(struct dvb_frontend *fe) -{ - struct cx24116_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct cx24116_cmd cmd; - fe_status_t tunerstat; - int i, status, ret, retune = 1; - - dprintk("%s()\n", __func__); - - switch (c->delivery_system) { - case SYS_DVBS: - dprintk("%s: DVB-S delivery system selected\n", __func__); - - /* Only QPSK is supported for DVB-S */ - if (c->modulation != QPSK) { - dprintk("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } - - /* Pilot doesn't exist in DVB-S, turn bit off */ - state->dnxt.pilot_val = CX24116_PILOT_OFF; - - /* DVB-S only supports 0.35 */ - if (c->rolloff != ROLLOFF_35) { - dprintk("%s: unsupported rolloff selected (%d)\n", - __func__, c->rolloff); - return -EOPNOTSUPP; - } - state->dnxt.rolloff_val = CX24116_ROLLOFF_035; - break; - - case SYS_DVBS2: - dprintk("%s: DVB-S2 delivery system selected\n", __func__); - - /* - * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, - * but not hardware auto detection - */ - if (c->modulation != PSK_8 && c->modulation != QPSK) { - dprintk("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } - - switch (c->pilot) { - case PILOT_AUTO: /* Not supported but emulated */ - state->dnxt.pilot_val = (c->modulation == QPSK) - ? CX24116_PILOT_OFF : CX24116_PILOT_ON; - retune++; - break; - case PILOT_OFF: - state->dnxt.pilot_val = CX24116_PILOT_OFF; - break; - case PILOT_ON: - state->dnxt.pilot_val = CX24116_PILOT_ON; - break; - default: - dprintk("%s: unsupported pilot mode selected (%d)\n", - __func__, c->pilot); - return -EOPNOTSUPP; - } - - switch (c->rolloff) { - case ROLLOFF_20: - state->dnxt.rolloff_val = CX24116_ROLLOFF_020; - break; - case ROLLOFF_25: - state->dnxt.rolloff_val = CX24116_ROLLOFF_025; - break; - case ROLLOFF_35: - state->dnxt.rolloff_val = CX24116_ROLLOFF_035; - break; - case ROLLOFF_AUTO: /* Rolloff must be explicit */ - default: - dprintk("%s: unsupported rolloff selected (%d)\n", - __func__, c->rolloff); - return -EOPNOTSUPP; - } - break; - - default: - dprintk("%s: unsupported delivery system selected (%d)\n", - __func__, c->delivery_system); - return -EOPNOTSUPP; - } - state->dnxt.delsys = c->delivery_system; - state->dnxt.modulation = c->modulation; - state->dnxt.frequency = c->frequency; - state->dnxt.pilot = c->pilot; - state->dnxt.rolloff = c->rolloff; - - ret = cx24116_set_inversion(state, c->inversion); - if (ret != 0) - return ret; - - /* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */ - ret = cx24116_set_fec(state, c->delivery_system, c->modulation, c->fec_inner); - if (ret != 0) - return ret; - - ret = cx24116_set_symbolrate(state, c->symbol_rate); - if (ret != 0) - return ret; - - /* discard the 'current' tuning parameters and prepare to tune */ - cx24116_clone_params(fe); - - dprintk("%s: delsys = %d\n", __func__, state->dcur.delsys); - dprintk("%s: modulation = %d\n", __func__, state->dcur.modulation); - dprintk("%s: frequency = %d\n", __func__, state->dcur.frequency); - dprintk("%s: pilot = %d (val = 0x%02x)\n", __func__, - state->dcur.pilot, state->dcur.pilot_val); - dprintk("%s: retune = %d\n", __func__, retune); - dprintk("%s: rolloff = %d (val = 0x%02x)\n", __func__, - state->dcur.rolloff, state->dcur.rolloff_val); - dprintk("%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate); - dprintk("%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n", __func__, - state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val); - dprintk("%s: Inversion = %d (val = 0x%02x)\n", __func__, - state->dcur.inversion, state->dcur.inversion_val); - - /* This is also done in advise/acquire on HVR4000 but not on LITE */ - if (state->config->set_ts_params) - state->config->set_ts_params(fe, 0); - - /* Set/Reset B/W */ - cmd.args[0x00] = CMD_BANDWIDTH; - cmd.args[0x01] = 0x01; - cmd.len = 0x02; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - - /* Prepare a tune request */ - cmd.args[0x00] = CMD_TUNEREQUEST; - - /* Frequency */ - cmd.args[0x01] = (state->dcur.frequency & 0xff0000) >> 16; - cmd.args[0x02] = (state->dcur.frequency & 0x00ff00) >> 8; - cmd.args[0x03] = (state->dcur.frequency & 0x0000ff); - - /* Symbol Rate */ - cmd.args[0x04] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8; - cmd.args[0x05] = ((state->dcur.symbol_rate / 1000) & 0x00ff); - - /* Automatic Inversion */ - cmd.args[0x06] = state->dcur.inversion_val; - - /* Modulation / FEC / Pilot */ - cmd.args[0x07] = state->dcur.fec_val | state->dcur.pilot_val; - - cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8; - cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff; - cmd.args[0x0a] = 0x00; - cmd.args[0x0b] = 0x00; - cmd.args[0x0c] = state->dcur.rolloff_val; - cmd.args[0x0d] = state->dcur.fec_mask; - - if (state->dcur.symbol_rate > 30000000) { - cmd.args[0x0e] = 0x04; - cmd.args[0x0f] = 0x00; - cmd.args[0x10] = 0x01; - cmd.args[0x11] = 0x77; - cmd.args[0x12] = 0x36; - cx24116_writereg(state, CX24116_REG_CLKDIV, 0x44); - cx24116_writereg(state, CX24116_REG_RATEDIV, 0x01); - } else { - cmd.args[0x0e] = 0x06; - cmd.args[0x0f] = 0x00; - cmd.args[0x10] = 0x00; - cmd.args[0x11] = 0xFA; - cmd.args[0x12] = 0x24; - cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46); - cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); - } - - cmd.len = 0x13; - - /* We need to support pilot and non-pilot tuning in the - * driver automatically. This is a workaround for because - * the demod does not support autodetect. - */ - do { - /* Reset status register */ - status = cx24116_readreg(state, CX24116_REG_SSTATUS) - & CX24116_SIGNAL_MASK; - cx24116_writereg(state, CX24116_REG_SSTATUS, status); - - /* Tune */ - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - break; - - /* - * Wait for up to 500 ms before retrying - * - * If we are able to tune then generally it occurs within 100ms. - * If it takes longer, try a different toneburst setting. - */ - for (i = 0; i < 50 ; i++) { - cx24116_read_status(fe, &tunerstat); - status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC); - if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { - dprintk("%s: Tuned\n", __func__); - goto tuned; - } - msleep(10); - } - - dprintk("%s: Not tuned\n", __func__); - - /* Toggle pilot bit when in auto-pilot */ - if (state->dcur.pilot == PILOT_AUTO) - cmd.args[0x07] ^= CX24116_PILOT_ON; - } while (--retune); - -tuned: /* Set/Reset B/W */ - cmd.args[0x00] = CMD_BANDWIDTH; - cmd.args[0x01] = 0x00; - cmd.len = 0x02; - return cx24116_cmd_execute(fe, &cmd); -} - -static int cx24116_tune(struct dvb_frontend *fe, bool re_tune, - unsigned int mode_flags, unsigned int *delay, fe_status_t *status) -{ - /* - * It is safe to discard "params" here, as the DVB core will sync - * fe->dtv_property_cache with fepriv->parameters_in, where the - * DVBv3 params are stored. The only practical usage for it indicate - * that re-tuning is needed, e. g. (fepriv->state & FESTATE_RETUNE) is - * true. - */ - - *delay = HZ / 5; - if (re_tune) { - int ret = cx24116_set_frontend(fe); - if (ret) - return ret; - } - return cx24116_read_status(fe, status); -} - -static int cx24116_get_algo(struct dvb_frontend *fe) -{ - return DVBFE_ALGO_HW; -} - -static struct dvb_frontend_ops cx24116_ops = { - .delsys = { SYS_DVBS, SYS_DVBS2 }, - .info = { - .name = "Conexant CX24116/CX24118", - .frequency_min = 950000, - .frequency_max = 2150000, - .frequency_stepsize = 1011, /* kHz for QPSK frontends */ - .frequency_tolerance = 5000, - .symbol_rate_min = 1000000, - .symbol_rate_max = 45000000, - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | - FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_2G_MODULATION | - FE_CAN_QPSK | FE_CAN_RECOVER - }, - - .release = cx24116_release, - - .init = cx24116_initfe, - .sleep = cx24116_sleep, - .read_status = cx24116_read_status, - .read_ber = cx24116_read_ber, - .read_signal_strength = cx24116_read_signal_strength, - .read_snr = cx24116_read_snr, - .read_ucblocks = cx24116_read_ucblocks, - .set_tone = cx24116_set_tone, - .set_voltage = cx24116_set_voltage, - .diseqc_send_master_cmd = cx24116_send_diseqc_msg, - .diseqc_send_burst = cx24116_diseqc_send_burst, - .get_frontend_algo = cx24116_get_algo, - .tune = cx24116_tune, - - .set_frontend = cx24116_set_frontend, -}; - -MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware"); -MODULE_AUTHOR("Steven Toth"); -MODULE_LICENSE("GPL"); - |