diff options
Diffstat (limited to 'drivers/media/dvb/frontends/lgdt330x.c')
| -rw-r--r-- | drivers/media/dvb/frontends/lgdt330x.c | 831 |
1 files changed, 831 insertions, 0 deletions
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c new file mode 100644 index 00000000000..c48e7c11d70 --- /dev/null +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -0,0 +1,831 @@ +/* + * Support for LGDT3302 and LGDT3303 - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * NOTES ABOUT THIS DRIVER + * + * This Linux driver supports: + * DViCO FusionHDTV 3 Gold-Q + * DViCO FusionHDTV 3 Gold-T + * DViCO FusionHDTV 5 Gold + * + * TODO: + * signal strength always returns 0. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <asm/byteorder.h> + +#include "dvb_frontend.h" +#include "lgdt330x_priv.h" +#include "lgdt330x.h" + +static int debug = 0; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off)."); +#define dprintk(args...) \ +do { \ +if (debug) printk(KERN_DEBUG "lgdt330x: " args); \ +} while (0) + +struct lgdt330x_state +{ + struct i2c_adapter* i2c; + struct dvb_frontend_ops ops; + + /* Configuration settings */ + const struct lgdt330x_config* config; + + struct dvb_frontend frontend; + + /* Demodulator private data */ + fe_modulation_t current_modulation; + + /* Tuner private data */ + u32 current_frequency; +}; + +static int i2c_write_demod_bytes (struct lgdt330x_state* state, + u8 *buf, /* data bytes to send */ + int len /* number of bytes to send */ ) +{ + struct i2c_msg msg = + { .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 }; + int i; + int err; + + for (i=0; i<len-1; i+=2){ + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, msg.buf[0], msg.buf[1], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } + msg.buf += 2; + } + return 0; +} + +/* + * This routine writes the register (reg) to the demod bus + * then reads the data returned for (len) bytes. + */ + +static u8 i2c_read_demod_bytes (struct lgdt330x_state* state, + enum I2C_REG reg, u8* buf, int len) +{ + u8 wr [] = { reg }; + struct i2c_msg msg [] = { + { .addr = state->config->demod_address, + .flags = 0, .buf = wr, .len = 1 }, + { .addr = state->config->demod_address, + .flags = I2C_M_RD, .buf = buf, .len = len }, + }; + int ret; + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __FUNCTION__, state->config->demod_address, reg, ret); + } else { + ret = 0; + } + return ret; +} + +/* Software reset */ +static int lgdt3302_SwReset(struct lgdt330x_state* state) +{ + u8 ret; + u8 reset[] = { + IRQ_MASK, + 0x00 /* bit 6 is active low software reset + * bits 5-0 are 1 to mask interrupts */ + }; + + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + if (ret == 0) { + + /* force reset high (inactive) and unmask interrupts */ + reset[1] = 0x7f; + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + } + return ret; +} + +static int lgdt3303_SwReset(struct lgdt330x_state* state) +{ + u8 ret; + u8 reset[] = { + 0x02, + 0x00 /* bit 0 is active low software reset */ + }; + + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + if (ret == 0) { + + /* force reset high (inactive) */ + reset[1] = 0x01; + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + } + return ret; +} + +static int lgdt330x_SwReset(struct lgdt330x_state* state) +{ + switch (state->config->demod_chip) { + case LGDT3302: + return lgdt3302_SwReset(state); + case LGDT3303: + return lgdt3303_SwReset(state); + default: + return -ENODEV; + } +} + +#ifdef MUTE_TDA9887 +static int i2c_write_ntsc_demod (struct lgdt330x_state* state, u8 buf[2]) +{ + struct i2c_msg msg = + { .addr = 0x43, + .flags = 0, + .buf = buf, + .len = 2 }; + int err; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, msg.buf[0], msg.buf[1], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } + return 0; +} + +static void fiddle_with_ntsc_if_demod(struct lgdt330x_state* state) +{ + // Experimental code + u8 buf0[] = {0x00, 0x20}; + u8 buf1[] = {0x01, 0x00}; + u8 buf2[] = {0x02, 0x00}; + + i2c_write_ntsc_demod(state, buf0); + i2c_write_ntsc_demod(state, buf1); + i2c_write_ntsc_demod(state, buf2); +} +#endif + +static int lgdt330x_init(struct dvb_frontend* fe) +{ + /* Hardware reset is done using gpio[0] of cx23880x chip. + * I'd like to do it here, but don't know how to find chip address. + * cx88-cards.c arranges for the reset bit to be inactive (high). + * Maybe there needs to be a callable function in cx88-core or + * the caller of this function needs to do it. */ + + /* + * Array of byte pairs <address, value> + * to initialize each different chip + */ + static u8 lgdt3302_init_data[] = { + /* Use 50MHz parameter values from spec sheet since xtal is 50 */ + /* Change the value of NCOCTFV[25:0] of carrier + recovery center frequency register */ + VSB_CARRIER_FREQ0, 0x00, + VSB_CARRIER_FREQ1, 0x87, + VSB_CARRIER_FREQ2, 0x8e, + VSB_CARRIER_FREQ3, 0x01, + /* Change the TPCLK pin polarity + data is valid on falling clock */ + DEMUX_CONTROL, 0xfb, + /* Change the value of IFBW[11:0] of + AGC IF/RF loop filter bandwidth register */ + AGC_RF_BANDWIDTH0, 0x40, + AGC_RF_BANDWIDTH1, 0x93, + AGC_RF_BANDWIDTH2, 0x00, + /* Change the value of bit 6, 'nINAGCBY' and + 'NSSEL[1:0] of ACG function control register 2 */ + AGC_FUNC_CTRL2, 0xc6, + /* Change the value of bit 6 'RFFIX' + of AGC function control register 3 */ + AGC_FUNC_CTRL3, 0x40, + /* Set the value of 'INLVTHD' register 0x2a/0x2c + to 0x7fe */ + AGC_DELAY0, 0x07, + AGC_DELAY2, 0xfe, + /* Change the value of IAGCBW[15:8] + of inner AGC loop filter bandwith */ + AGC_LOOP_BANDWIDTH0, 0x08, + AGC_LOOP_BANDWIDTH1, 0x9a + }; + + static u8 lgdt3303_init_data[] = { + 0x4c, 0x14 + }; + + struct lgdt330x_state* state = fe->demodulator_priv; + char *chip_name; + int err; + + switch (state->config->demod_chip) { + case LGDT3302: + chip_name = "LGDT3302"; + err = i2c_write_demod_bytes(state, lgdt3302_init_data, + sizeof(lgdt3302_init_data)); + break; + case LGDT3303: + chip_name = "LGDT3303"; + err = i2c_write_demod_bytes(state, lgdt3303_init_data, + sizeof(lgdt3303_init_data)); +#ifdef MUTE_TDA9887 + fiddle_with_ntsc_if_demod(state); +#endif + break; + default: + chip_name = "undefined"; + printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n"); + err = -ENODEV; + } + dprintk("%s entered as %s\n", __FUNCTION__, chip_name); + if (err < 0) + return err; + return lgdt330x_SwReset(state); +} + +static int lgdt330x_read_ber(struct dvb_frontend* fe, u32* ber) +{ + *ber = 0; /* Not supplied by the demod chips */ + return 0; +} + +static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct lgdt330x_state* state = fe->demodulator_priv; + int err; + u8 buf[2]; + + switch (state->config->demod_chip) { + case LGDT3302: + err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1, + buf, sizeof(buf)); + break; + case LGDT3303: + err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1, + buf, sizeof(buf)); + break; + default: + printk(KERN_WARNING + "Only LGDT3302 and LGDT3303 are supported chips.\n"); + err = -ENODEV; + } + + *ucblocks = (buf[0] << 8) | buf[1]; + return 0; +} + +static int lgdt330x_set_parameters(struct dvb_frontend* fe, + struct dvb_frontend_parameters *param) +{ + /* + * Array of byte pairs <address, value> + * to initialize 8VSB for lgdt3303 chip 50 MHz IF + */ + static u8 lgdt3303_8vsb_44_data[] = { + 0x04, 0x00, + 0x0d, 0x40, + 0x0e, 0x87, + 0x0f, 0x8e, + 0x10, 0x01, + 0x47, 0x8b }; + + /* + * Array of byte pairs <address, value> + * to initialize QAM for lgdt3303 chip + */ + static u8 lgdt3303_qam_data[] = { + 0x04, 0x00, + 0x0d, 0x00, + 0x0e, 0x00, + 0x0f, 0x00, + 0x10, 0x00, + 0x51, 0x63, + 0x47, 0x66, + 0x48, 0x66, + 0x4d, 0x1a, + 0x49, 0x08, + 0x4a, 0x9b }; + + struct lgdt330x_state* state = fe->demodulator_priv; + + static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 }; + + int err; + /* Change only if we are actually changing the modulation */ + if (state->current_modulation != param->u.vsb.modulation) { + switch(param->u.vsb.modulation) { + case VSB_8: + dprintk("%s: VSB_8 MODE\n", __FUNCTION__); + + /* Select VSB mode */ + top_ctrl_cfg[1] = 0x03; + + /* Select ANT connector if supported by card */ + if (state->config->pll_rf_set) + state->config->pll_rf_set(fe, 1); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data, + sizeof(lgdt3303_8vsb_44_data)); + } + break; + + case QAM_64: + dprintk("%s: QAM_64 MODE\n", __FUNCTION__); + + /* Select QAM_64 mode */ + top_ctrl_cfg[1] = 0x00; + + /* Select CABLE connector if supported by card */ + if (state->config->pll_rf_set) + state->config->pll_rf_set(fe, 0); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_qam_data, + sizeof(lgdt3303_qam_data)); + } + break; + + case QAM_256: + dprintk("%s: QAM_256 MODE\n", __FUNCTION__); + + /* Select QAM_256 mode */ + top_ctrl_cfg[1] = 0x01; + + /* Select CABLE connector if supported by card */ + if (state->config->pll_rf_set) + state->config->pll_rf_set(fe, 0); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_qam_data, + sizeof(lgdt3303_qam_data)); + } + break; + default: + printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation); + return -1; + } + /* + * select serial or parallel MPEG harware interface + * Serial: 0x04 for LGDT3302 or 0x40 for LGDT3303 + * Parallel: 0x00 + */ + top_ctrl_cfg[1] |= state->config->serial_mpeg; + + /* Select the requested mode */ + i2c_write_demod_bytes(state, top_ctrl_cfg, + sizeof(top_ctrl_cfg)); + state->config->set_ts_params(fe, 0); + state->current_modulation = param->u.vsb.modulation; + } + + /* Change only if we are actually changing the channel */ + if (state->current_frequency != param->frequency) { + /* Tune to the new frequency */ + state->config->pll_set(fe, param); + /* Keep track of the new frequency */ + state->current_frequency = param->frequency; + } + lgdt330x_SwReset(state); + return 0; +} + +static int lgdt330x_get_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters* param) +{ + struct lgdt330x_state *state = fe->demodulator_priv; + param->frequency = state->current_frequency; + return 0; +} + +static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct lgdt330x_state* state = fe->demodulator_priv; + u8 buf[3]; + + *status = 0; /* Reset status result */ + + /* AGC status register */ + i2c_read_demod_bytes(state, AGC_STATUS, buf, 1); + dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); + if ((buf[0] & 0x0c) == 0x8){ + /* Test signal does not exist flag */ + /* as well as the AGC lock flag. */ + *status |= FE_HAS_SIGNAL; + } else { + /* Without a signal all other status bits are meaningless */ + return 0; + } + + /* + * You must set the Mask bits to 1 in the IRQ_MASK in order + * to see that status bit in the IRQ_STATUS register. + * This is done in SwReset(); + */ + /* signal status */ + i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf)); + dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]); + + + /* sync status */ + if ((buf[2] & 0x03) == 0x01) { + *status |= FE_HAS_SYNC; + } + + /* FEC error status */ + if ((buf[2] & 0x0c) == 0x08) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + } + + /* Carrier Recovery Lock Status Register */ + i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + /* Need to undestand why there are 3 lock levels here */ + if ((buf[0] & 0x07) == 0x07) + *status |= FE_HAS_CARRIER; + break; + case VSB_8: + if ((buf[0] & 0x80) == 0x80) + *status |= FE_HAS_CARRIER; + break; + default: + printk("KERN_WARNING lgdt330x: %s: Modulation set to unsupported value\n", __FUNCTION__); + } + + return 0; +} + +static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct lgdt330x_state* state = fe->demodulator_priv; + int err; + u8 buf[3]; + + *status = 0; /* Reset status result */ + + /* lgdt3303 AGC status register */ + err = i2c_read_demod_bytes(state, 0x58, buf, 1); + if (err < 0) + return err; + + dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); + if ((buf[0] & 0x21) == 0x01){ + /* Test input signal does not exist flag */ + /* as well as the AGC lock flag. */ + *status |= FE_HAS_SIGNAL; + } else { + /* Without a signal all other status bits are meaningless */ + return 0; + } + + /* Carrier Recovery Lock Status Register */ + i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + /* Need to undestand why there are 3 lock levels here */ + if ((buf[0] & 0x07) == 0x07) + *status |= FE_HAS_CARRIER; + else + break; + i2c_read_demod_bytes(state, 0x8a, buf, 1); + if ((buf[0] & 0x04) == 0x04) + *status |= FE_HAS_SYNC; + if ((buf[0] & 0x01) == 0x01) + *status |= FE_HAS_LOCK; + if ((buf[0] & 0x08) == 0x08) + *status |= FE_HAS_VITERBI; + break; + case VSB_8: + if ((buf[0] & 0x80) == 0x80) + *status |= FE_HAS_CARRIER; + else + break; + i2c_read_demod_bytes(state, 0x38, buf, 1); + if ((buf[0] & 0x02) == 0x00) + *status |= FE_HAS_SYNC; + if ((buf[0] & 0x01) == 0x01) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + } + break; + default: + printk("KERN_WARNING lgdt330x: %s: Modulation set to unsupported value\n", __FUNCTION__); + } + return 0; +} + +static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + /* not directly available. */ + *strength = 0; + return 0; +} + +static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr) +{ +#ifdef SNR_IN_DB + /* + * Spec sheet shows formula for SNR_EQ = 10 log10(25 * 24**2 / noise) + * and SNR_PH = 10 log10(25 * 32**2 / noise) for equalizer and phase tracker + * respectively. The following tables are built on these formulas. + * The usual definition is SNR = 20 log10(signal/noise) + * If the specification is wrong the value retuned is 1/2 the actual SNR in db. + * + * This table is a an ordered list of noise values computed by the + * formula from the spec sheet such that the index into the table + * starting at 43 or 45 is the SNR value in db. There are duplicate noise + * value entries at the beginning because the SNR varies more than + * 1 db for a change of 1 digit in noise at very small values of noise. + * + * Examples from SNR_EQ table: + * noise SNR + * 0 43 + * 1 42 + * 2 39 + * 3 37 + * 4 36 + * 5 35 + * 6 34 + * 7 33 + * 8 33 + * 9 32 + * 10 32 + * 11 31 + * 12 31 + * 13 30 + */ + + static const u32 SNR_EQ[] = + { 1, 2, 2, 2, 3, 3, 4, 4, 5, 7, + 9, 11, 13, 17, 21, 26, 33, 41, 52, 65, + 81, 102, 129, 162, 204, 257, 323, 406, 511, 644, + 810, 1020, 1284, 1616, 2035, 2561, 3224, 4059, 5110, 6433, + 8098, 10195, 12835, 16158, 20341, 25608, 32238, 40585, 51094, 64323, + 80978, 101945, 128341, 161571, 203406, 256073, 0x40000 + }; + + static const u32 SNR_PH[] = + { 1, 2, 2, 2, 3, 3, 4, 5, 6, 8, + 10, 12, 15, 19, 23, 29, 37, 46, 58, 73, + 91, 115, 144, 182, 229, 288, 362, 456, 574, 722, + 909, 1144, 1440, 1813, 2282, 2873, 3617, 4553, 5732, 7216, + 9084, 11436, 14396, 18124, 22817, 28724, 36161, 45524, 57312, 72151, + 90833, 114351, 143960, 181235, 228161, 0x080000 + }; + + static u8 buf[5];/* read data buffer */ + static u32 noise; /* noise value */ + static u32 snr_db; /* index into SNR_EQ[] */ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + + /* read both equalizer and phase tracker noise data */ + i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf)); + + if (state->current_modulation == VSB_8) { + /* Equalizer Mean-Square Error Register for VSB */ + noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2]; + + /* + * Look up noise value in table. + * A better search algorithm could be used... + * watch out there are duplicate entries. + */ + for (snr_db = 0; snr_db < sizeof(SNR_EQ); snr_db++) { + if (noise < SNR_EQ[snr_db]) { + *snr = 43 - snr_db; + break; + } + } + } else { + /* Phase Tracker Mean-Square Error Register for QAM */ + noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4]; + + /* Look up noise value in table. */ + for (snr_db = 0; snr_db < sizeof(SNR_PH); snr_db++) { + if (noise < SNR_PH[snr_db]) { + *snr = 45 - snr_db; + break; + } + } + } +#else + /* Return the raw noise value */ + static u8 buf[5];/* read data buffer */ + static u32 noise; /* noise value */ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + + /* read both equalizer and pase tracker noise data */ + i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf)); + + if (state->current_modulation == VSB_8) { + /* Phase Tracker Mean-Square Error Register for VSB */ + noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4]; + } else { + + /* Carrier Recovery Mean-Square Error for QAM */ + i2c_read_demod_bytes(state, 0x1a, buf, 2); + noise = ((buf[0] & 3) << 8) | buf[1]; + } + + /* Small values for noise mean signal is better so invert noise */ + *snr = ~noise; +#endif + + dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr); + + return 0; +} + +static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr) +{ + /* Return the raw noise value */ + static u8 buf[5];/* read data buffer */ + static u32 noise; /* noise value */ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + + if (state->current_modulation == VSB_8) { + + /* Phase Tracker Mean-Square Error Register for VSB */ + noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4]; + } else { + + /* Carrier Recovery Mean-Square Error for QAM */ + i2c_read_demod_bytes(state, 0x1a, buf, 2); + noise = (buf[0] << 8) | buf[1]; + } + + /* Small values for noise mean signal is better so invert noise */ + *snr = ~noise; + + dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr); + + return 0; +} + +static int lgdt330x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) +{ + /* I have no idea about this - it may not be needed */ + fe_tune_settings->min_delay_ms = 500; + fe_tune_settings->step_size = 0; + fe_tune_settings->max_drift = 0; + return 0; +} + +static void lgdt330x_release(struct dvb_frontend* fe) +{ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops lgdt3302_ops; +static struct dvb_frontend_ops lgdt3303_ops; + +struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, + struct i2c_adapter* i2c) +{ + struct lgdt330x_state* state = NULL; + u8 buf[1]; + + /* Allocate memory for the internal state */ + state = (struct lgdt330x_state*) kmalloc(sizeof(struct lgdt330x_state), GFP_KERNEL); + if (state == NULL) + goto error; + memset(state,0,sizeof(*state)); + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + switch (config->demod_chip) { + case LGDT3302: + memcpy(&state->ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops)); + break; + case LGDT3303: + memcpy(&state->ops, &lgdt3303_ops, sizeof(struct dvb_frontend_ops)); + break; + default: + goto error; + } + + /* Verify communication with demod chip */ + if (i2c_read_demod_bytes(state, 2, buf, 1)) + goto error; + + state->current_frequency = -1; + state->current_modulation = -1; + + /* Create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + if (state) + kfree(state); + dprintk("%s: ERROR\n",__FUNCTION__); + return NULL; +} + +static struct dvb_frontend_ops lgdt3302_ops = { + .info = { + .name= "LG Electronics LGDT3302/LGDT3303 VSB/QAM Frontend", + .type = FE_ATSC, + .frequency_min= 54000000, + .frequency_max= 858000000, + .frequency_stepsize= 62500, + /* Symbol rate is for all VSB modes need to check QAM */ + .symbol_rate_min = 10762000, + .symbol_rate_max = 10762000, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .init = lgdt330x_init, + .set_frontend = lgdt330x_set_parameters, + .get_frontend = lgdt330x_get_frontend, + .get_tune_settings = lgdt330x_get_tune_settings, + .read_status = lgdt3302_read_status, + .read_ber = lgdt330x_read_ber, + .read_signal_strength = lgdt330x_read_signal_strength, + .read_snr = lgdt3302_read_snr, + .read_ucblocks = lgdt330x_read_ucblocks, + .release = lgdt330x_release, +}; + +static struct dvb_frontend_ops lgdt3303_ops = { + .info = { + .name= "LG Electronics LGDT3303 VSB/QAM Frontend", + .type = FE_ATSC, + .frequency_min= 54000000, + .frequency_max= 858000000, + .frequency_stepsize= 62500, + /* Symbol rate is for all VSB modes need to check QAM */ + .symbol_rate_min = 10762000, + .symbol_rate_max = 10762000, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .init = lgdt330x_init, + .set_frontend = lgdt330x_set_parameters, + .get_frontend = lgdt330x_get_frontend, + .get_tune_settings = lgdt330x_get_tune_settings, + .read_status = lgdt3303_read_status, + .read_ber = lgdt330x_read_ber, + .read_signal_strength = lgdt330x_read_signal_strength, + .read_snr = lgdt3303_read_snr, + .read_ucblocks = lgdt330x_read_ucblocks, + .release = lgdt330x_release, +}; + +MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); +MODULE_AUTHOR("Wilson Michaels"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(lgdt330x_attach); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ |