diff options
Diffstat (limited to 'drivers/media/dvb/frontends/s5h1432.c')
| -rw-r--r-- | drivers/media/dvb/frontends/s5h1432.c | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/drivers/media/dvb/frontends/s5h1432.c b/drivers/media/dvb/frontends/s5h1432.c new file mode 100644 index 00000000000..0c6dcb90d16 --- /dev/null +++ b/drivers/media/dvb/frontends/s5h1432.c @@ -0,0 +1,415 @@ +/* + * Samsung s5h1432 DVB-T demodulator driver + * + * Copyright (C) 2009 Bill Liu <Bill.Liu@Conexant.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include "dvb_frontend.h" +#include "s5h1432.h" + +struct s5h1432_state { + + struct i2c_adapter *i2c; + + /* configuration settings */ + const struct s5h1432_config *config; + + struct dvb_frontend frontend; + + fe_modulation_t current_modulation; + unsigned int first_tune:1; + + u32 current_frequency; + int if_freq; + + u8 inversion; +}; + +static int debug; + +#define dprintk(arg...) do { \ + if (debug) \ + printk(arg); \ + } while (0) + +static int s5h1432_writereg(struct s5h1432_state *state, + u8 addr, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + + struct i2c_msg msg = {.addr = addr, .flags = 0, .buf = buf, .len = 2 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, " + "ret == %i)\n", __func__, addr, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static u8 s5h1432_readreg(struct s5h1432_state *state, u8 addr, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + {.addr = addr, .flags = 0, .buf = b0, .len = 1}, + {.addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 1} + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); + return b1[0]; +} + +static int s5h1432_sleep(struct dvb_frontend *fe) +{ + return 0; +} + +static int s5h1432_set_channel_bandwidth(struct dvb_frontend *fe, + u32 bandwidth) +{ + struct s5h1432_state *state = fe->demodulator_priv; + + u8 reg = 0; + + /* Register [0x2E] bit 3:2 : 8MHz = 0; 7MHz = 1; 6MHz = 2 */ + reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x2E); + reg &= ~(0x0C); + switch (bandwidth) { + case 6: + reg |= 0x08; + break; + case 7: + reg |= 0x04; + break; + case 8: + reg |= 0x00; + break; + default: + return 0; + } + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2E, reg); + return 1; +} + +static int s5h1432_set_IF(struct dvb_frontend *fe, u32 ifFreqHz) +{ + struct s5h1432_state *state = fe->demodulator_priv; + + switch (ifFreqHz) { + case TAIWAN_HI_IF_FREQ_44_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x15); + break; + case EUROPE_HI_IF_FREQ_36_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x40); + break; + case IF_FREQ_6_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xe0); + break; + case IF_FREQ_3point3_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE); + break; + case IF_FREQ_3point5_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xED); + break; + case IF_FREQ_4_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0xAA); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0xAA); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEA); + break; + default: + { + u32 value = 0; + value = (u32) (((48000 - (ifFreqHz / 1000)) * 512 * + (u32) 32768) / (48 * 1000)); + printk(KERN_INFO + "Default IFFreq %d :reg value = 0x%x\n", + ifFreqHz, value); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, + (u8) value & 0xFF); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, + (u8) (value >> 8) & 0xFF); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, + (u8) (value >> 16) & 0xFF); + break; + } + + } + + return 1; +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +static int s5h1432_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + u32 dvb_bandwidth = 8; + struct s5h1432_state *state = fe->demodulator_priv; + + if (p->frequency == state->current_frequency) { + /*current_frequency = p->frequency; */ + /*state->current_frequency = p->frequency; */ + } else { + fe->ops.tuner_ops.set_params(fe, p); + msleep(300); + s5h1432_set_channel_bandwidth(fe, dvb_bandwidth); + switch (p->u.ofdm.bandwidth) { + case BANDWIDTH_6_MHZ: + dvb_bandwidth = 6; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case BANDWIDTH_7_MHZ: + dvb_bandwidth = 7; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case BANDWIDTH_8_MHZ: + dvb_bandwidth = 8; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + default: + return 0; + } + /*fe->ops.tuner_ops.set_params(fe, p); */ +/*Soft Reset chip*/ + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); + + s5h1432_set_channel_bandwidth(fe, dvb_bandwidth); + switch (p->u.ofdm.bandwidth) { + case BANDWIDTH_6_MHZ: + dvb_bandwidth = 6; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case BANDWIDTH_7_MHZ: + dvb_bandwidth = 7; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case BANDWIDTH_8_MHZ: + dvb_bandwidth = 8; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + default: + return 0; + } + /*fe->ops.tuner_ops.set_params(fe,p); */ + /*Soft Reset chip*/ + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); + + } + + state->current_frequency = p->frequency; + + return 0; +} + +static int s5h1432_init(struct dvb_frontend *fe) +{ + struct s5h1432_state *state = fe->demodulator_priv; + + u8 reg = 0; + state->current_frequency = 0; + printk(KERN_INFO " s5h1432_init().\n"); + + /*Set VSB mode as default, this also does a soft reset */ + /*Initialize registers */ + + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x04, 0xa8); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x05, 0x01); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x07, 0x70); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x19, 0x80); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1b, 0x9D); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1c, 0x30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1d, 0x20); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x1B); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2e, 0x40); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, 0x84); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x50, 0x5a); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x5a, 0xd3); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x68, 0x50); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xb8, 0x3c); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xc4, 0x10); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xcc, 0x9c); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xDA, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe1, 0x94); + /* s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf4, 0xa1); */ + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf9, 0x00); + + /*For NXP tuner*/ + + /*Set 3.3MHz as default IF frequency */ + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE); + /* Set reg 0x1E to get the full dynamic range */ + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x31); + + /* Mode setting in demod */ + reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x42); + reg |= 0x80; + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, reg); + /* Serial mode */ + + /* Soft Reset chip */ + + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); + + + return 0; +} + +static int s5h1432_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + return 0; +} + +static int s5h1432_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + return 0; +} + +static int s5h1432_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + return 0; +} + +static int s5h1432_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + + return 0; +} + +static int s5h1432_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + return 0; +} + +static int s5h1432_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + return 0; +} + +static int s5h1432_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + return 0; +} + +static void s5h1432_release(struct dvb_frontend *fe) +{ + struct s5h1432_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops s5h1432_ops; + +struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config, + struct i2c_adapter *i2c) +{ + struct s5h1432_state *state = NULL; + + printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n"); + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct s5h1432_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->current_modulation = QAM_16; + state->inversion = state->config->inversion; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &s5h1432_ops, + sizeof(struct dvb_frontend_ops)); + + state->frontend.demodulator_priv = state; + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(s5h1432_attach); + +static struct dvb_frontend_ops s5h1432_ops = { + + .info = { + .name = "Samsung s5h1432 DVB-T Frontend", + .type = FE_OFDM, + .frequency_min = 177000000, + .frequency_max = 858000000, + .frequency_stepsize = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER}, + + .init = s5h1432_init, + .sleep = s5h1432_sleep, + .set_frontend = s5h1432_set_frontend, + .get_frontend = s5h1432_get_frontend, + .get_tune_settings = s5h1432_get_tune_settings, + .read_status = s5h1432_read_status, + .read_ber = s5h1432_read_ber, + .read_signal_strength = s5h1432_read_signal_strength, + .read_snr = s5h1432_read_snr, + .read_ucblocks = s5h1432_read_ucblocks, + .release = s5h1432_release, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("Samsung s5h1432 DVB-T Demodulator driver"); +MODULE_AUTHOR("Bill Liu"); +MODULE_LICENSE("GPL"); |