1 files changed, 88 insertions, 0 deletions
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c
new file mode 100644
index 00000000000..96674c78e86
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_vp3028.c
@@ -0,0 +1,88 @@
+/*
+	Hopper VP-3028 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "hopper_vp3028.h"
+
+struct zl10353_config hopper_vp3028_config = {
+	.demod_address	= 0x0f,
+};
+
+#define MANTIS_MODEL_NAME	"VP-3028"
+#define MANTIS_DEV_TYPE		"DVB-T"
+
+static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter	= &mantis->adapter;
+	struct mantis_hwconfig *config	= mantis->hwconfig;
+	int err = 0;
+
+	gpio_set_bits(mantis, config->reset, 0);
+	msleep(100);
+	err = mantis_frontend_power(mantis, POWER_ON);
+	msleep(100);
+	gpio_set_bits(mantis, config->reset, 1);
+
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		msleep(250);
+		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+		fe = zl10353_attach(&hopper_vp3028_config, adapter);
+
+		if (!fe)
+			return -1;
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+	}
+	dprintk(MANTIS_ERROR, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp3028_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_188,
+
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+
+	.frontend_init	= vp3028_frontend_init,
+	.power		= GPIF_A00,
+	.reset		= GPIF_A03,
+};