diff options
Diffstat (limited to 'drivers/media/dvb/mantis/mantis_vp1033.c')
| -rw-r--r-- | drivers/media/dvb/mantis/mantis_vp1033.c | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c new file mode 100644 index 00000000000..4a723bda003 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -0,0 +1,212 @@ +/* + Mantis VP-1033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "stv0299.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1033.h" +#include "mantis_reg.h" + +u8 lgtdqcs001f_inittab[] = { + 0x01, 0x15, + 0x02, 0x00, + 0x03, 0x00, + 0x04, 0x2a, + 0x05, 0x85, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x00, + 0x0c, 0x01, + 0x0d, 0x81, + 0x0e, 0x44, + 0x0f, 0x94, + 0x10, 0x3c, + 0x11, 0x84, + 0x12, 0xb9, + 0x13, 0xb5, + 0x14, 0x4f, + 0x15, 0xc9, + 0x16, 0x80, + 0x17, 0x36, + 0x18, 0xfb, + 0x19, 0xcf, + 0x1a, 0xbc, + 0x1c, 0x2b, + 0x1d, 0x27, + 0x1e, 0x00, + 0x1f, 0x0b, + 0x20, 0xa1, + 0x21, 0x60, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x05, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x13, + 0xff, 0xff, +}; + +#define MANTIS_MODEL_NAME "VP-1033" +#define MANTIS_DEV_TYPE "DVB-S/DSS" + +int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[4]; + u32 div; + + + struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)}; + + div = params->frequency / 250; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x83; + buf[3] = 0xc0; + + if (params->frequency < 1531000) + buf[3] |= 0x04; + else + buf[3] &= ~0x04; + if (i2c_transfer(adapter, &msg, 1) < 0) { + dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed"); + return -EIO; + } + msleep_interruptible(100); + + return 0; +} + +int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; + bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; + bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; + bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; + bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; + bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; + bclk = 0x51; + } + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); + + return 0; +} + +struct stv0299_config lgtdqcs001f_config = { + .demod_address = 0x68, + .inittab = lgtdqcs001f_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = lgtdqcs001f_set_symbol_rate, +}; + +static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); + fe = stv0299_attach(&lgtdqcs001f_config, adapter); + + if (fe) { + fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; + dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x", + lgtdqcs001f_config.demod_address); + + dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1033_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; |