summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/ttpci/budget-av.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/ttpci/budget-av.c')
-rw-r--r--drivers/media/dvb/ttpci/budget-av.c1014
1 files changed, 1014 insertions, 0 deletions
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
new file mode 100644
index 00000000000..14e963206b8
--- /dev/null
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -0,0 +1,1014 @@
+/*
+ * budget-av.c: driver for the SAA7146 based Budget DVB cards
+ * with analog video in
+ *
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
+ * Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph Metzler
+ * & Marcus Metzler for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org/dvb/
+ */
+
+#include "budget.h"
+#include "stv0299.h"
+#include "tda10021.h"
+#include "tda1004x.h"
+#include <media/saa7146_vv.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+
+#include "dvb_ca_en50221.h"
+
+#define DEBICICAM 0x02420000
+
+struct budget_av {
+ struct budget budget;
+ struct video_device *vd;
+ int cur_input;
+ int has_saa7113;
+ struct tasklet_struct ciintf_irq_tasklet;
+ int slot_status;
+ struct dvb_ca_en50221 ca;
+};
+
+static int enable_ci = 0;
+
+
+/****************************************************************************
+ * INITIALIZATION
+ ****************************************************************************/
+
+static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
+{
+ u8 mm1[] = { 0x00 };
+ u8 mm2[] = { 0x00 };
+ struct i2c_msg msgs[2];
+
+ msgs[0].flags = 0;
+ msgs[1].flags = I2C_M_RD;
+ msgs[0].addr = msgs[1].addr = id / 2;
+ mm1[0] = reg;
+ msgs[0].len = 1;
+ msgs[1].len = 1;
+ msgs[0].buf = mm1;
+ msgs[1].buf = mm2;
+
+ i2c_transfer(i2c, msgs, 2);
+
+ return mm2[0];
+}
+
+static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
+{
+ u8 mm1[] = { reg };
+ struct i2c_msg msgs[2] = {
+ {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
+ {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
+ };
+
+ if (i2c_transfer(i2c, msgs, 2) != 2)
+ return -EIO;
+
+ return 0;
+}
+
+static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
+{
+ u8 msg[2] = { reg, val };
+ struct i2c_msg msgs;
+
+ msgs.flags = 0;
+ msgs.addr = id / 2;
+ msgs.len = 2;
+ msgs.buf = msg;
+ return i2c_transfer(i2c, &msgs, 1);
+}
+
+static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ int result;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+ udelay(1);
+
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0);
+
+ if (result == -ETIMEDOUT)
+ budget_av->slot_status = 0;
+ return result;
+}
+
+static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ int result;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+ udelay(1);
+
+ result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0);
+
+ if (result == -ETIMEDOUT)
+ budget_av->slot_status = 0;
+ return result;
+}
+
+static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ int result;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ udelay(1);
+
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
+
+ if (result == -ETIMEDOUT)
+ budget_av->slot_status = 0;
+ return result;
+}
+
+static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ int result;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ udelay(1);
+
+ result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
+
+ if (result == -ETIMEDOUT)
+ budget_av->slot_status = 0;
+ return result;
+}
+
+static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ struct saa7146_dev *saa = budget_av->budget.dev;
+ int max = 20;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ dprintk(1, "ciintf_slot_reset\n");
+
+ /* reset the card */
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+ msleep(100);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+
+ while (--max > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
+ msleep(100);
+
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ return 0;
+}
+
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ struct saa7146_dev *saa = budget_av->budget.dev;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ dprintk(1, "ciintf_slot_shutdown\n");
+
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ budget_av->slot_status = 0;
+ return 0;
+}
+
+static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ struct saa7146_dev *saa = budget_av->budget.dev;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
+
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
+ return 0;
+}
+
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct budget_av *budget_av = (struct budget_av *) ca->data;
+ struct saa7146_dev *saa = budget_av->budget.dev;
+ int cam = 0;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ if (!budget_av->slot_status) {
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+ udelay(1);
+ cam = saa7146_read(saa, PSR) & MASK_06;
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+
+ if (cam)
+ budget_av->slot_status = 1;
+ } else if (!open) {
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
+ budget_av->slot_status = 0;
+ }
+
+ if (budget_av->slot_status == 1)
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+
+ return 0;
+}
+
+static int ciintf_init(struct budget_av *budget_av)
+{
+ struct saa7146_dev *saa = budget_av->budget.dev;
+ int result;
+
+ memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
+
+ /* setup GPIOs */
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+
+ /* Reset the card */
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+ msleep(50);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+ msleep(100);
+
+ /* Enable DEBI pins */
+ saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+
+ /* register CI interface */
+ budget_av->ca.owner = THIS_MODULE;
+ budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
+ budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
+ budget_av->ca.read_cam_control = ciintf_read_cam_control;
+ budget_av->ca.write_cam_control = ciintf_write_cam_control;
+ budget_av->ca.slot_reset = ciintf_slot_reset;
+ budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
+ budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
+ budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
+ budget_av->ca.data = budget_av;
+ if ((result = dvb_ca_en50221_init(budget_av->budget.dvb_adapter,
+ &budget_av->ca, 0, 1)) != 0) {
+ printk("budget_av: CI interface detected, but initialisation failed.\n");
+ goto error;
+ }
+ // success!
+ printk("ciintf_init: CI interface initialised\n");
+ budget_av->budget.ci_present = 1;
+ return 0;
+
+error:
+ saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ return result;
+}
+
+static void ciintf_deinit(struct budget_av *budget_av)
+{
+ struct saa7146_dev *saa = budget_av->budget.dev;
+
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+
+ /* release the CA device */
+ dvb_ca_en50221_release(&budget_av->ca);
+
+ /* disable DEBI pins */
+ saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+}
+
+
+static const u8 saa7113_tab[] = {
+ 0x01, 0x08,
+ 0x02, 0xc0,
+ 0x03, 0x33,
+ 0x04, 0x00,
+ 0x05, 0x00,
+ 0x06, 0xeb,
+ 0x07, 0xe0,
+ 0x08, 0x28,
+ 0x09, 0x00,
+ 0x0a, 0x80,
+ 0x0b, 0x47,
+ 0x0c, 0x40,
+ 0x0d, 0x00,
+ 0x0e, 0x01,
+ 0x0f, 0x44,
+
+ 0x10, 0x08,
+ 0x11, 0x0c,
+ 0x12, 0x7b,
+ 0x13, 0x00,
+ 0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
+
+ 0x57, 0xff,
+ 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
+ 0x5b, 0x83, 0x5e, 0x00,
+ 0xff
+};
+
+static int saa7113_init(struct budget_av *budget_av)
+{
+ struct budget *budget = &budget_av->budget;
+ const u8 *data = saa7113_tab;
+
+ if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
+ dprintk(1, "saa7113 not found on KNC card\n");
+ return -ENODEV;
+ }
+
+ dprintk(1, "saa7113 detected and initializing\n");
+
+ while (*data != 0xff) {
+ i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
+ data += 2;
+ }
+
+ dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
+
+ return 0;
+}
+
+static int saa7113_setinput(struct budget_av *budget_av, int input)
+{
+ struct budget *budget = &budget_av->budget;
+
+ if (1 != budget_av->has_saa7113)
+ return -ENODEV;
+
+ if (input == 1) {
+ i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
+ i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
+ } else if (input == 0) {
+ i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
+ i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
+ } else
+ return -EINVAL;
+
+ budget_av->cur_input = input;
+ return 0;
+}
+
+
+static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+ u8 m1;
+
+ aclk = 0xb5;
+ if (srate < 2000000)
+ bclk = 0x86;
+ else if (srate < 5000000)
+ bclk = 0x89;
+ else if (srate < 15000000)
+ bclk = 0x8f;
+ else if (srate < 45000000)
+ bclk = 0x95;
+
+ m1 = 0x14;
+ if (srate < 4000000)
+ m1 = 0x10;
+
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+ stv0299_writereg(fe, 0x0f, 0x80 | m1);
+
+ return 0;
+}
+
+static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct budget_av *budget_av = (struct budget_av *) fe->dvb->priv;
+ u32 div;
+ u8 buf[4];
+ struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ buf[3] = 0x20;
+
+ if (params->u.qpsk.symbol_rate < 4000000)
+ buf[3] |= 1;
+
+ if (params->frequency < 1250000)
+ buf[3] |= 0;
+ else if (params->frequency < 1550000)
+ buf[3] |= 0x40;
+ else if (params->frequency < 2050000)
+ buf[3] |= 0x80;
+ else if (params->frequency < 2150000)
+ buf[3] |= 0xC0;
+
+ if (i2c_transfer(&budget_av->budget.i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static u8 typhoon_cinergy1200s_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x92,
+ 0xff, 0xff
+};
+
+static struct stv0299_config typhoon_config = {
+ .demod_address = 0x68,
+ .inittab = typhoon_cinergy1200s_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+ .pll_set = philips_su1278_ty_ci_pll_set,
+};
+
+
+static struct stv0299_config cinergy_1200s_config = {
+ .demod_address = 0x68,
+ .inittab = typhoon_cinergy1200s_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_0,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+ .pll_set = philips_su1278_ty_ci_pll_set,
+};
+
+
+static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+ u8 buf[4];
+ struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
+
+#define TUNER_MUL 62500
+
+ u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x8e;
+ buf[3] = (params->frequency < 174500000 ? 0xa1 :
+ params->frequency < 454000000 ? 0x92 : 0x34);
+
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static struct tda10021_config philips_cu1216_config = {
+ .demod_address = 0x0c,
+ .pll_set = philips_cu1216_pll_set,
+};
+
+
+
+
+static int philips_tu1216_pll_init(struct dvb_frontend *fe)
+{
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+ static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
+ struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
+
+ // setup PLL configuration
+ if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+ msleep(1);
+
+ return 0;
+}
+
+static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+ u8 tuner_buf[4];
+ struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
+ sizeof(tuner_buf) };
+ int tuner_frequency = 0;
+ u8 band, cp, filter;
+
+ // determine charge pump
+ tuner_frequency = params->frequency + 36166000;
+ if (tuner_frequency < 87000000)
+ return -EINVAL;
+ else if (tuner_frequency < 130000000)
+ cp = 3;
+ else if (tuner_frequency < 160000000)
+ cp = 5;
+ else if (tuner_frequency < 200000000)
+ cp = 6;
+ else if (tuner_frequency < 290000000)
+ cp = 3;
+ else if (tuner_frequency < 420000000)
+ cp = 5;
+ else if (tuner_frequency < 480000000)
+ cp = 6;
+ else if (tuner_frequency < 620000000)
+ cp = 3;
+ else if (tuner_frequency < 830000000)
+ cp = 5;
+ else if (tuner_frequency < 895000000)
+ cp = 7;
+ else
+ return -EINVAL;
+
+ // determine band
+ if (params->frequency < 49000000)
+ return -EINVAL;
+ else if (params->frequency < 161000000)
+ band = 1;
+ else if (params->frequency < 444000000)
+ band = 2;
+ else if (params->frequency < 861000000)
+ band = 4;
+ else
+ return -EINVAL;
+
+ // setup PLL filter
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ filter = 0;
+ break;
+
+ case BANDWIDTH_7_MHZ:
+ filter = 0;
+ break;
+
+ case BANDWIDTH_8_MHZ:
+ filter = 1;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ // calculate divisor
+ // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
+ tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
+
+ // setup tuner buffer
+ tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
+ tuner_buf[1] = tuner_frequency & 0xff;
+ tuner_buf[2] = 0xca;
+ tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+
+ if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ msleep(1);
+ return 0;
+}
+
+static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
+ const struct firmware **fw, char *name)
+{
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+
+ return request_firmware(fw, name, &budget->dev->pci->dev);
+}
+
+static struct tda1004x_config philips_tu1216_config = {
+
+ .demod_address = 0x8,
+ .invert = 1,
+ .invert_oclk = 1,
+ .pll_init = philips_tu1216_pll_init,
+ .pll_set = philips_tu1216_pll_set,
+ .request_firmware = philips_tu1216_request_firmware,
+};
+
+
+
+
+static u8 read_pwm(struct budget_av *budget_av)
+{
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
+ {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
+ };
+
+ if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+
+static void frontend_init(struct budget_av *budget_av)
+{
+ switch (budget_av->budget.dev->pci->subsystem_device) {
+ case 0x4f56: // Typhoon/KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
+ budget_av->budget.dvb_frontend =
+ stv0299_attach(&typhoon_config, &budget_av->budget.i2c_adap);
+ if (budget_av->budget.dvb_frontend != NULL) {
+ break;
+ }
+ break;
+
+ case 0x0020: // KNC1 DVB-C budget (tda10021/Philips CU1216(tua6034))
+ budget_av->budget.dvb_frontend =
+ tda10021_attach(&philips_cu1216_config,
+ &budget_av->budget.i2c_adap, read_pwm(budget_av));
+ if (budget_av->budget.dvb_frontend != NULL) {
+ break;
+ }
+ break;
+
+ case 0x0030: // KNC1 DVB-T budget (tda10046/Philips TU1216(tda6651tt))
+ budget_av->budget.dvb_frontend =
+ tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
+ if (budget_av->budget.dvb_frontend != NULL) {
+ break;
+ }
+ break;
+
+ case 0x1154: // TerraTec Cinergy 1200 DVB-S (stv0299/Philips SU1278(tsa5059))
+ budget_av->budget.dvb_frontend =
+ stv0299_attach(&cinergy_1200s_config, &budget_av->budget.i2c_adap);
+ if (budget_av->budget.dvb_frontend != NULL) {
+ break;
+ }
+ break;
+
+ case 0x1156: // Terratec Cinergy 1200 DVB-C (tda10021/Philips CU1216(tua6034))
+ budget_av->budget.dvb_frontend =
+ tda10021_attach(&philips_cu1216_config,
+ &budget_av->budget.i2c_adap, read_pwm(budget_av));
+ if (budget_av->budget.dvb_frontend) {
+ break;
+ }
+ break;
+
+ case 0x1157: // Terratec Cinergy 1200 DVB-T (tda10046/Philips TU1216(tda6651tt))
+ budget_av->budget.dvb_frontend =
+ tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
+ if (budget_av->budget.dvb_frontend) {
+ break;
+ }
+ break;
+ }
+
+ if (budget_av->budget.dvb_frontend == NULL) {
+ printk("budget_av: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
+ budget_av->budget.dev->pci->vendor,
+ budget_av->budget.dev->pci->device,
+ budget_av->budget.dev->pci->subsystem_vendor,
+ budget_av->budget.dev->pci->subsystem_device);
+ } else {
+ if (dvb_register_frontend
+ (budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) {
+ printk("budget-av: Frontend registration failed!\n");
+ if (budget_av->budget.dvb_frontend->ops->release)
+ budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
+ budget_av->budget.dvb_frontend = NULL;
+ }
+ }
+}
+
+
+static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
+{
+ struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+
+ dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
+
+ if (*isr & MASK_10)
+ ttpci_budget_irq10_handler(dev, isr);
+}
+
+static int budget_av_detach(struct saa7146_dev *dev)
+{
+ struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+ int err;
+
+ dprintk(2, "dev: %p\n", dev);
+
+ if (1 == budget_av->has_saa7113) {
+ saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+
+ msleep(200);
+
+ saa7146_unregister_device(&budget_av->vd, dev);
+ }
+
+ if (budget_av->budget.ci_present)
+ ciintf_deinit(budget_av);
+
+ if (budget_av->budget.dvb_frontend != NULL)
+ dvb_unregister_frontend(budget_av->budget.dvb_frontend);
+ err = ttpci_budget_deinit(&budget_av->budget);
+
+ kfree(budget_av);
+
+ return err;
+}
+
+static struct saa7146_ext_vv vv_data;
+
+static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+ struct budget_av *budget_av;
+ u8 *mac;
+ int err;
+
+ dprintk(2, "dev: %p\n", dev);
+
+ if (!(budget_av = kmalloc(sizeof(struct budget_av), GFP_KERNEL)))
+ return -ENOMEM;
+
+ memset(budget_av, 0, sizeof(struct budget_av));
+
+ budget_av->budget.ci_present = 0;
+
+ dev->ext_priv = budget_av;
+
+ if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) {
+ kfree(budget_av);
+ return err;
+ }
+
+ /* knc1 initialization */
+ saa7146_write(dev, DD1_STREAM_B, 0x04000000);
+ saa7146_write(dev, DD1_INIT, 0x07000600);
+ saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
+
+ saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
+ msleep(500);
+
+ if (0 == saa7113_init(budget_av)) {
+ budget_av->has_saa7113 = 1;
+
+ if (0 != saa7146_vv_init(dev, &vv_data)) {
+ /* fixme: proper cleanup here */
+ ERR(("cannot init vv subsystem.\n"));
+ return err;
+ }
+
+ if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
+ /* fixme: proper cleanup here */
+ ERR(("cannot register capture v4l2 device.\n"));
+ return err;
+ }
+
+ /* beware: this modifies dev->vv ... */
+ saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
+ SAA7146_HPS_SYNC_PORT_A);
+
+ saa7113_setinput(budget_av, 0);
+ } else {
+ budget_av->has_saa7113 = 0;
+
+ saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+ }
+
+ /* fixme: find some sane values here... */
+ saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
+
+ mac = budget_av->budget.dvb_adapter->proposed_mac;
+ if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
+ printk("KNC1-%d: Could not read MAC from KNC1 card\n",
+ budget_av->budget.dvb_adapter->num);
+ memset(mac, 0, 6);
+ } else {
+ printk("KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+ budget_av->budget.dvb_adapter->num,
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+ }
+
+ budget_av->budget.dvb_adapter->priv = budget_av;
+ frontend_init(budget_av);
+
+ if (enable_ci)
+ ciintf_init(budget_av);
+
+ return 0;
+}
+
+#define KNC1_INPUTS 2
+static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
+ {0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
+ {1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
+};
+
+static struct saa7146_extension_ioctls ioctls[] = {
+ {VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE},
+ {VIDIOC_G_INPUT, SAA7146_EXCLUSIVE},
+ {VIDIOC_S_INPUT, SAA7146_EXCLUSIVE},
+ {0, 0}
+};
+
+static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+
+ switch (cmd) {
+ case VIDIOC_ENUMINPUT:{
+ struct v4l2_input *i = arg;
+
+ dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
+ if (i->index < 0 || i->index >= KNC1_INPUTS) {
+ return -EINVAL;
+ }
+ memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
+ return 0;
+ }
+ case VIDIOC_G_INPUT:{
+ int *input = (int *) arg;
+
+ *input = budget_av->cur_input;
+
+ dprintk(1, "VIDIOC_G_INPUT %d.\n", *input);
+ return 0;
+ }
+ case VIDIOC_S_INPUT:{
+ int input = *(int *) arg;
+ dprintk(1, "VIDIOC_S_INPUT %d.\n", input);
+ return saa7113_setinput(budget_av, input);
+ }
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static struct saa7146_standard standard[] = {
+ {.name = "PAL",.id = V4L2_STD_PAL,
+ .v_offset = 0x17,.v_field = 288,
+ .h_offset = 0x14,.h_pixels = 680,
+ .v_max_out = 576,.h_max_out = 768 },
+
+ {.name = "NTSC",.id = V4L2_STD_NTSC,
+ .v_offset = 0x16,.v_field = 240,
+ .h_offset = 0x06,.h_pixels = 708,
+ .v_max_out = 480,.h_max_out = 640, },
+};
+
+static struct saa7146_ext_vv vv_data = {
+ .inputs = 2,
+ .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
+ .flags = 0,
+ .stds = &standard[0],
+ .num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
+ .ioctls = &ioctls[0],
+ .ioctl = av_ioctl,
+};
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
+MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
+MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
+MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
+
+static struct pci_device_id pci_tbl[] = {
+ MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
+ MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
+ MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
+ MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
+ MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
+ MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
+ {
+ .vendor = 0,
+ }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_extension budget_extension = {
+ .name = "budget dvb /w video in\0",
+ .pci_tbl = pci_tbl,
+
+ .module = THIS_MODULE,
+ .attach = budget_av_attach,
+ .detach = budget_av_detach,
+
+ .irq_mask = MASK_10,
+ .irq_func = budget_av_irq,
+};
+
+static int __init budget_av_init(void)
+{
+ return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_av_exit(void)
+{
+ saa7146_unregister_extension(&budget_extension);
+}
+
+module_init(budget_av_init);
+module_exit(budget_av_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
+ "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
+module_param_named(enable_ci, enable_ci, int, 0644);
+MODULE_PARM_DESC(enable_ci, "Turn on/off CI module (default:off).");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-17 19:22:43 +0000