diff options
Diffstat (limited to 'drivers/media/dvb')
-rw-r--r-- | drivers/media/dvb/frontends/Kconfig | 30 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/Makefile | 4 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/mt2060.c | 369 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/mt2060.h | 43 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/mt2060_priv.h | 105 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/mt2131.c | 314 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/mt2131.h | 54 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/mt2131_priv.h | 49 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/mt2266.c | 351 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/mt2266.h | 37 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/qt1010.c | 485 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/qt1010.h | 53 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/qt1010_priv.h | 105 |
13 files changed, 1 insertions, 1998 deletions
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 1486d96fd4b..6d238460592 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -336,7 +336,7 @@ config DVB_S5H1411 An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. -comment "Tuners/PLL support" +comment "Digital terrestrial only tuners/PLL" depends on DVB_CORE config DVB_PLL @@ -347,34 +347,6 @@ config DVB_PLL This module drives a number of tuners based on PLL chips with a common I2C interface. Say Y when you want to support these tuners. -config DVB_TUNER_QT1010 - tristate "Quantek QT1010 silicon tuner" - depends on DVB_CORE && I2C - default m if DVB_FE_CUSTOMISE - help - A driver for the silicon tuner QT1010 from Quantek. - -config DVB_TUNER_MT2060 - tristate "Microtune MT2060 silicon IF tuner" - depends on I2C - default m if DVB_FE_CUSTOMISE - help - A driver for the silicon IF tuner MT2060 from Microtune. - -config DVB_TUNER_MT2266 - tristate "Microtune MT2266 silicon tuner" - depends on I2C - default m if DVB_FE_CUSTOMISE - help - A driver for the silicon baseband tuner MT2266 from Microtune. - -config DVB_TUNER_MT2131 - tristate "Microtune MT2131 silicon tuner" - depends on I2C - default m if DVB_FE_CUSTOMISE - help - A driver for the silicon baseband tuner MT2131 from Microtune. - config DVB_TUNER_DIB0070 tristate "DiBcom DiB0070 silicon base-band tuner" depends on I2C diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 9b4438a13d0..a89dc0fc4c6 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -40,12 +40,8 @@ obj-$(CONFIG_DVB_ISL6405) += isl6405.o obj-$(CONFIG_DVB_ISL6421) += isl6421.o obj-$(CONFIG_DVB_TDA10086) += tda10086.o obj-$(CONFIG_DVB_TDA826X) += tda826x.o -obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o -obj-$(CONFIG_DVB_TUNER_MT2266) += mt2266.o obj-$(CONFIG_DVB_TUNER_DIB0070) += dib0070.o -obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o obj-$(CONFIG_DVB_TUA6100) += tua6100.o -obj-$(CONFIG_DVB_TUNER_MT2131) += mt2131.o obj-$(CONFIG_DVB_S5H1409) += s5h1409.o obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o obj-$(CONFIG_DVB_AU8522) += au8522.o diff --git a/drivers/media/dvb/frontends/mt2060.c b/drivers/media/dvb/frontends/mt2060.c deleted file mode 100644 index 1305b0e63ce..00000000000 --- a/drivers/media/dvb/frontends/mt2060.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner" - * - * Copyright (c) 2006 Olivier DANET <odanet@caramail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= - */ - -/* In that file, frequencies are expressed in kiloHertz to avoid 32 bits overflows */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/dvb/frontend.h> -#include <linux/i2c.h> - -#include "dvb_frontend.h" - -#include "mt2060.h" -#include "mt2060_priv.h" - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - -#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2060: " args); printk("\n"); }} while (0) - -// Reads a single register -static int mt2060_readreg(struct mt2060_priv *priv, u8 reg, u8 *val) -{ - struct i2c_msg msg[2] = { - { .addr = priv->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 }, - { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val, .len = 1 }, - }; - - if (i2c_transfer(priv->i2c, msg, 2) != 2) { - printk(KERN_WARNING "mt2060 I2C read failed\n"); - return -EREMOTEIO; - } - return 0; -} - -// Writes a single register -static int mt2060_writereg(struct mt2060_priv *priv, u8 reg, u8 val) -{ - u8 buf[2] = { reg, val }; - struct i2c_msg msg = { - .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2 - }; - - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_WARNING "mt2060 I2C write failed\n"); - return -EREMOTEIO; - } - return 0; -} - -// Writes a set of consecutive registers -static int mt2060_writeregs(struct mt2060_priv *priv,u8 *buf, u8 len) -{ - struct i2c_msg msg = { - .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = len - }; - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n",(int)len); - return -EREMOTEIO; - } - return 0; -} - -// Initialisation sequences -// LNABAND=3, NUM1=0x3C, DIV1=0x74, NUM2=0x1080, DIV2=0x49 -static u8 mt2060_config1[] = { - REG_LO1C1, - 0x3F, 0x74, 0x00, 0x08, 0x93 -}; - -// FMCG=2, GP2=0, GP1=0 -static u8 mt2060_config2[] = { - REG_MISC_CTRL, - 0x20, 0x1E, 0x30, 0xff, 0x80, 0xff, 0x00, 0x2c, 0x42 -}; - -// VGAG=3, V1CSE=1 - -#ifdef MT2060_SPURCHECK -/* The function below calculates the frequency offset between the output frequency if2 - and the closer cross modulation subcarrier between lo1 and lo2 up to the tenth harmonic */ -static int mt2060_spurcalc(u32 lo1,u32 lo2,u32 if2) -{ - int I,J; - int dia,diamin,diff; - diamin=1000000; - for (I = 1; I < 10; I++) { - J = ((2*I*lo1)/lo2+1)/2; - diff = I*(int)lo1-J*(int)lo2; - if (diff < 0) diff=-diff; - dia = (diff-(int)if2); - if (dia < 0) dia=-dia; - if (diamin > dia) diamin=dia; - } - return diamin; -} - -#define BANDWIDTH 4000 // kHz - -/* Calculates the frequency offset to add to avoid spurs. Returns 0 if no offset is needed */ -static int mt2060_spurcheck(u32 lo1,u32 lo2,u32 if2) -{ - u32 Spur,Sp1,Sp2; - int I,J; - I=0; - J=1000; - - Spur=mt2060_spurcalc(lo1,lo2,if2); - if (Spur < BANDWIDTH) { - /* Potential spurs detected */ - dprintk("Spurs before : f_lo1: %d f_lo2: %d (kHz)", - (int)lo1,(int)lo2); - I=1000; - Sp1 = mt2060_spurcalc(lo1+I,lo2+I,if2); - Sp2 = mt2060_spurcalc(lo1-I,lo2-I,if2); - - if (Sp1 < Sp2) { - J=-J; I=-I; Spur=Sp2; - } else - Spur=Sp1; - - while (Spur < BANDWIDTH) { - I += J; - Spur = mt2060_spurcalc(lo1+I,lo2+I,if2); - } - dprintk("Spurs after : f_lo1: %d f_lo2: %d (kHz)", - (int)(lo1+I),(int)(lo2+I)); - } - return I; -} -#endif - -#define IF2 36150 // IF2 frequency = 36.150 MHz -#define FREF 16000 // Quartz oscillator 16 MHz - -static int mt2060_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) -{ - struct mt2060_priv *priv; - int ret=0; - int i=0; - u32 freq; - u8 lnaband; - u32 f_lo1,f_lo2; - u32 div1,num1,div2,num2; - u8 b[8]; - u32 if1; - - priv = fe->tuner_priv; - - if1 = priv->if1_freq; - b[0] = REG_LO1B1; - b[1] = 0xFF; - - mt2060_writeregs(priv,b,2); - - freq = params->frequency / 1000; // Hz -> kHz - priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0; - - f_lo1 = freq + if1 * 1000; - f_lo1 = (f_lo1 / 250) * 250; - f_lo2 = f_lo1 - freq - IF2; - // From the Comtech datasheet, the step used is 50kHz. The tuner chip could be more precise - f_lo2 = ((f_lo2 + 25) / 50) * 50; - priv->frequency = (f_lo1 - f_lo2 - IF2) * 1000, - -#ifdef MT2060_SPURCHECK - // LO-related spurs detection and correction - num1 = mt2060_spurcheck(f_lo1,f_lo2,IF2); - f_lo1 += num1; - f_lo2 += num1; -#endif - //Frequency LO1 = 16MHz * (DIV1 + NUM1/64 ) - num1 = f_lo1 / (FREF / 64); - div1 = num1 / 64; - num1 &= 0x3f; - - // Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 ) - num2 = f_lo2 * 64 / (FREF / 128); - div2 = num2 / 8192; - num2 &= 0x1fff; - - if (freq <= 95000) lnaband = 0xB0; else - if (freq <= 180000) lnaband = 0xA0; else - if (freq <= 260000) lnaband = 0x90; else - if (freq <= 335000) lnaband = 0x80; else - if (freq <= 425000) lnaband = 0x70; else - if (freq <= 480000) lnaband = 0x60; else - if (freq <= 570000) lnaband = 0x50; else - if (freq <= 645000) lnaband = 0x40; else - if (freq <= 730000) lnaband = 0x30; else - if (freq <= 810000) lnaband = 0x20; else lnaband = 0x10; - - b[0] = REG_LO1C1; - b[1] = lnaband | ((num1 >>2) & 0x0F); - b[2] = div1; - b[3] = (num2 & 0x0F) | ((num1 & 3) << 4); - b[4] = num2 >> 4; - b[5] = ((num2 >>12) & 1) | (div2 << 1); - - dprintk("IF1: %dMHz",(int)if1); - dprintk("PLL freq=%dkHz f_lo1=%dkHz f_lo2=%dkHz",(int)freq,(int)f_lo1,(int)f_lo2); - dprintk("PLL div1=%d num1=%d div2=%d num2=%d",(int)div1,(int)num1,(int)div2,(int)num2); - dprintk("PLL [1..5]: %2x %2x %2x %2x %2x",(int)b[1],(int)b[2],(int)b[3],(int)b[4],(int)b[5]); - - mt2060_writeregs(priv,b,6); - - //Waits for pll lock or timeout - i = 0; - do { - mt2060_readreg(priv,REG_LO_STATUS,b); - if ((b[0] & 0x88)==0x88) - break; - msleep(4); - i++; - } while (i<10); - - return ret; -} - -static void mt2060_calibrate(struct mt2060_priv *priv) -{ - u8 b = 0; - int i = 0; - - if (mt2060_writeregs(priv,mt2060_config1,sizeof(mt2060_config1))) - return; - if (mt2060_writeregs(priv,mt2060_config2,sizeof(mt2060_config2))) - return; - - /* initialize the clock output */ - mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30); - - do { - b |= (1 << 6); // FM1SS; - mt2060_writereg(priv, REG_LO2C1,b); - msleep(20); - - if (i == 0) { - b |= (1 << 7); // FM1CA; - mt2060_writereg(priv, REG_LO2C1,b); - b &= ~(1 << 7); // FM1CA; - msleep(20); - } - - b &= ~(1 << 6); // FM1SS - mt2060_writereg(priv, REG_LO2C1,b); - - msleep(20); - i++; - } while (i < 9); - - i = 0; - while (i++ < 10 && mt2060_readreg(priv, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0) - msleep(20); - - if (i < 10) { - mt2060_readreg(priv, REG_FM_FREQ, &priv->fmfreq); // now find out, what is fmreq used for :) - dprintk("calibration was successful: %d", (int)priv->fmfreq); - } else - dprintk("FMCAL timed out"); -} - -static int mt2060_get_frequency(struct dvb_frontend *fe, u32 *frequency) -{ - struct mt2060_priv *priv = fe->tuner_priv; - *frequency = priv->frequency; - return 0; -} - -static int mt2060_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) -{ - struct mt2060_priv *priv = fe->tuner_priv; - *bandwidth = priv->bandwidth; - return 0; -} - -static int mt2060_init(struct dvb_frontend *fe) -{ - struct mt2060_priv *priv = fe->tuner_priv; - return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x33); -} - -static int mt2060_sleep(struct dvb_frontend *fe) -{ - struct mt2060_priv *priv = fe->tuner_priv; - return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30); -} - -static int mt2060_release(struct dvb_frontend *fe) -{ - kfree(fe->tuner_priv); - fe->tuner_priv = NULL; - return 0; -} - -static const struct dvb_tuner_ops mt2060_tuner_ops = { - .info = { - .name = "Microtune MT2060", - .frequency_min = 48000000, - .frequency_max = 860000000, - .frequency_step = 50000, - }, - - .release = mt2060_release, - - .init = mt2060_init, - .sleep = mt2060_sleep, - - .set_params = mt2060_set_params, - .get_frequency = mt2060_get_frequency, - .get_bandwidth = mt2060_get_bandwidth -}; - -/* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */ -struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1) -{ - struct mt2060_priv *priv = NULL; - u8 id = 0; - - priv = kzalloc(sizeof(struct mt2060_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; - - priv->cfg = cfg; - priv->i2c = i2c; - priv->if1_freq = if1; - - if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) { - kfree(priv); - return NULL; - } - - if (id != PART_REV) { - kfree(priv); - return NULL; - } - printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1); - memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(struct dvb_tuner_ops)); - - fe->tuner_priv = priv; - - mt2060_calibrate(priv); - - return fe; -} -EXPORT_SYMBOL(mt2060_attach); - -MODULE_AUTHOR("Olivier DANET"); -MODULE_DESCRIPTION("Microtune MT2060 silicon tuner driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/mt2060.h b/drivers/media/dvb/frontends/mt2060.h deleted file mode 100644 index acba0058f51..00000000000 --- a/drivers/media/dvb/frontends/mt2060.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner" - * - * Copyright (c) 2006 Olivier DANET <odanet@caramail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= - */ - -#ifndef MT2060_H -#define MT2060_H - -struct dvb_frontend; -struct i2c_adapter; - -struct mt2060_config { - u8 i2c_address; - u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */ -}; - -#if defined(CONFIG_DVB_TUNER_MT2060) || (defined(CONFIG_DVB_TUNER_MT2060_MODULE) && defined(MODULE)) -extern struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1); -#else -static inline struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1) -{ - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return NULL; -} -#endif // CONFIG_DVB_TUNER_MT2060 - -#endif diff --git a/drivers/media/dvb/frontends/mt2060_priv.h b/drivers/media/dvb/frontends/mt2060_priv.h deleted file mode 100644 index 5eaccdefd0b..00000000000 --- a/drivers/media/dvb/frontends/mt2060_priv.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner" - * - * Copyright (c) 2006 Olivier DANET <odanet@caramail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= - */ - -#ifndef MT2060_PRIV_H -#define MT2060_PRIV_H - -// Uncomment the #define below to enable spurs checking. The results where quite unconvincing. -// #define MT2060_SPURCHECK - -/* This driver is based on the information available in the datasheet of the - "Comtech SDVBT-3K6M" tuner ( K1000737843.pdf ) which features the MT2060 register map : - - I2C Address : 0x60 - - Reg.No | B7 | B6 | B5 | B4 | B3 | B2 | B1 | B0 | ( defaults ) - -------------------------------------------------------------------------------- - 00 | [ PART ] | [ REV ] | R = 0x63 - 01 | [ LNABAND ] | [ NUM1(5:2) ] | RW = 0x3F - 02 | [ DIV1 ] | RW = 0x74 - 03 | FM1CA | FM1SS | [ NUM1(1:0) ] | [ NUM2(3:0) ] | RW = 0x00 - 04 | NUM2(11:4) ] | RW = 0x08 - 05 | [ DIV2 ] |NUM2(12)| RW = 0x93 - 06 | L1LK | [ TAD1 ] | L2LK | [ TAD2 ] | R - 07 | [ FMF ] | R - 08 | ? | FMCAL | ? | ? | ? | ? | ? | TEMP | R - 09 | 0 | 0 | [ FMGC ] | 0 | GP02 | GP01 | 0 | RW = 0x20 - 0A | ?? - 0B | 0 | 0 | 1 | 1 | 0 | 0 | [ VGAG ] | RW = 0x30 - 0C | V1CSE | 1 | 1 | 1 | 1 | 1 | 1 | 1 | RW = 0xFF - 0D | 1 | 0 | [ V1CS ] | RW = 0xB0 - 0E | ?? - 0F | ?? - 10 | ?? - 11 | [ LOTO ] | 0 | 0 | 1 | 0 | RW = 0x42 - - PART : Part code : 6 for MT2060 - REV : Revision code : 3 for current revision - LNABAND : Input frequency range : ( See code for details ) - NUM1 / DIV1 / NUM2 / DIV2 : Frequencies programming ( See code for details ) - FM1CA : Calibration Start Bit - FM1SS : Calibration Single Step bit - L1LK : LO1 Lock Detect - TAD1 : Tune Line ADC ( ? ) - L2LK : LO2 Lock Detect - TAD2 : Tune Line ADC ( ? ) - FMF : Estimated first IF Center frequency Offset ( ? ) - FM1CAL : Calibration done bit - TEMP : On chip temperature sensor - FMCG : Mixer 1 Cap Gain ( ? ) - GP01 / GP02 : Programmable digital outputs. Unconnected pins ? - V1CSE : LO1 VCO Automatic Capacitor Select Enable ( ? ) - V1CS : LO1 Capacitor Selection Value ( ? ) - LOTO : LO Timeout ( ? ) - VGAG : Tuner Output gain -*/ - -#define I2C_ADDRESS 0x60 - -#define REG_PART_REV 0 -#define REG_LO1C1 1 -#define REG_LO1C2 2 -#define REG_LO2C1 3 -#define REG_LO2C2 4 -#define REG_LO2C3 5 -#define REG_LO_STATUS 6 -#define REG_FM_FREQ 7 -#define REG_MISC_STAT 8 -#define REG_MISC_CTRL 9 -#define REG_RESERVED_A 0x0A -#define REG_VGAG 0x0B -#define REG_LO1B1 0x0C -#define REG_LO1B2 0x0D -#define REG_LOTO 0x11 - -#define PART_REV 0x63 // The current driver works only with PART=6 and REV=3 chips - -struct mt2060_priv { - struct mt2060_config *cfg; - struct i2c_adapter *i2c; - - u32 frequency; - u32 bandwidth; - u16 if1_freq; - u8 fmfreq; -}; - -#endif diff --git a/drivers/media/dvb/frontends/mt2131.c b/drivers/media/dvb/frontends/mt2131.c deleted file mode 100644 index e254bcfc2ef..00000000000 --- a/drivers/media/dvb/frontends/mt2131.c +++ /dev/null @@ -1,314 +0,0 @@ -/* - * Driver for Microtune MT2131 "QAM/8VSB single chip tuner" - * - * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/dvb/frontend.h> -#include <linux/i2c.h> - -#include "dvb_frontend.h" - -#include "mt2131.h" -#include "mt2131_priv.h" - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - -#define dprintk(level,fmt, arg...) if (debug >= level) \ - printk(KERN_INFO "%s: " fmt, "mt2131", ## arg) - -static u8 mt2131_config1[] = { - 0x01, - 0x50, 0x00, 0x50, 0x80, 0x00, 0x49, 0xfa, 0x88, - 0x08, 0x77, 0x41, 0x04, 0x00, 0x00, 0x00, 0x32, - 0x7f, 0xda, 0x4c, 0x00, 0x10, 0xaa, 0x78, 0x80, - 0xff, 0x68, 0xa0, 0xff, 0xdd, 0x00, 0x00 -}; - -static u8 mt2131_config2[] = { - 0x10, - 0x7f, 0xc8, 0x0a, 0x5f, 0x00, 0x04 -}; - -static int mt2131_readreg(struct mt2131_priv *priv, u8 reg, u8 *val) -{ - struct i2c_msg msg[2] = { - { .addr = priv->cfg->i2c_address, .flags = 0, - .buf = ®, .len = 1 }, - { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, - .buf = val, .len = 1 }, - }; - - if (i2c_transfer(priv->i2c, msg, 2) != 2) { - printk(KERN_WARNING "mt2131 I2C read failed\n"); - return -EREMOTEIO; - } - return 0; -} - -static int mt2131_writereg(struct mt2131_priv *priv, u8 reg, u8 val) -{ - u8 buf[2] = { reg, val }; - struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0, - .buf = buf, .len = 2 }; - - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_WARNING "mt2131 I2C write failed\n"); - return -EREMOTEIO; - } - return 0; -} - -static int mt2131_writeregs(struct mt2131_priv *priv,u8 *buf, u8 len) -{ - struct i2c_msg msg = { .addr = priv->cfg->i2c_address, - .flags = 0, .buf = buf, .len = len }; - - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_WARNING "mt2131 I2C write failed (len=%i)\n", - (int)len); - return -EREMOTEIO; - } - return 0; -} - -static int mt2131_set_params(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) -{ - struct mt2131_priv *priv; - int ret=0, i; - u32 freq; - u8 if_band_center; - u32 f_lo1, f_lo2; - u32 div1, num1, div2, num2; - u8 b[8]; - u8 lockval = 0; - - priv = fe->tuner_priv; - if (fe->ops.info.type == FE_OFDM) - priv->bandwidth = params->u.ofdm.bandwidth; - else - priv->bandwidth = 0; - - freq = params->frequency / 1000; // Hz -> kHz - dprintk(1, "%s() freq=%d\n", __func__, freq); - - f_lo1 = freq + MT2131_IF1 * 1000; - f_lo1 = (f_lo1 / 250) * 250; - f_lo2 = f_lo1 - freq - MT2131_IF2; - - priv->frequency = (f_lo1 - f_lo2 - MT2131_IF2) * 1000; - - /* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */ - num1 = f_lo1 * 64 / (MT2131_FREF / 128); - div1 = num1 / 8192; - num1 &= 0x1fff; - - /* Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 ) */ - num2 = f_lo2 * 64 / (MT2131_FREF / 128); - div2 = num2 / 8192; - num2 &= 0x1fff; - - if (freq <= 82500) if_band_center = 0x00; else - if (freq <= 137500) if_band_center = 0x01; else - if (freq <= 192500) if_band_center = 0x02; else - if (freq <= 247500) if_band_center = 0x03; else - if (freq <= 302500) if_band_center = 0x04; else - if (freq <= 357500) if_band_center = 0x05; else - if (freq <= 412500) if_band_center = 0x06; else - if (freq <= 467500) if_band_center = 0x07; else - if (freq <= 522500) if_band_center = 0x08; else - if (freq <= 577500) if_band_center = 0x09; else - if (freq <= 632500) if_band_center = 0x0A; else - if (freq <= 687500) if_band_center = 0x0B; else - if (freq <= 742500) if_band_center = 0x0C; else - if (freq <= 797500) if_band_center = 0x0D; else - if (freq <= 852500) if_band_center = 0x0E; else - if (freq <= 907500) if_band_center = 0x0F; else - if (freq <= 962500) if_band_center = 0x10; else - if (freq <= 1017500) if_band_center = 0x11; else - if (freq <= 1072500) if_band_center = 0x12; else if_band_center = 0x13; - - b[0] = 1; - b[1] = (num1 >> 5) & 0xFF; - b[2] = (num1 & 0x1F); - b[3] = div1; - b[4] = (num2 >> 5) & 0xFF; - b[5] = num2 & 0x1F; - b[6] = div2; - - dprintk(1, "IF1: %dMHz IF2: %dMHz\n", MT2131_IF1, MT2131_IF2); - dprintk(1, "PLL freq=%dkHz band=%d\n", (int)freq, (int)if_band_center); - dprintk(1, "PLL f_lo1=%dkHz f_lo2=%dkHz\n", (int)f_lo1, (int)f_lo2); - dprintk(1, "PLL div1=%d num1=%d div2=%d num2=%d\n", - (int)div1, (int)num1, (int)div2, (int)num2); - dprintk(1, "PLL [1..6]: %2x %2x %2x %2x %2x %2x\n", - (int)b[1], (int)b[2], (int)b[3], (int)b[4], (int)b[5], - (int)b[6]); - - ret = mt2131_writeregs(priv,b,7); - if (ret < 0) - return ret; - - mt2131_writereg(priv, 0x0b, if_band_center); - - /* Wait for lock */ - i = 0; - do { - mt2131_readreg(priv, 0x08, &lockval); - if ((lockval & 0x88) == 0x88) - break; - msleep(4); - i++; - } while (i < 10); - - return ret; -} - -static int mt2131_get_frequency(struct dvb_frontend *fe, u32 *frequency) -{ - struct mt2131_priv *priv = fe->tuner_priv; - dprintk(1, "%s()\n", __func__); - *frequency = priv->frequency; - return 0; -} - -static int mt2131_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) -{ - struct mt2131_priv *priv = fe->tuner_priv; - dprintk(1, "%s()\n", __func__); - *bandwidth = priv->bandwidth; - return 0; -} - -static int mt2131_get_status(struct dvb_frontend *fe, u32 *status) -{ - struct mt2131_priv *priv = fe->tuner_priv; - u8 lock_status = 0; - u8 afc_status = 0; - - *status = 0; - - mt2131_readreg(priv, 0x08, &lock_status); - if ((lock_status & 0x88) == 0x88) - *status = TUNER_STATUS_LOCKED; - - mt2131_readreg(priv, 0x09, &afc_status); - dprintk(1, "%s() - LO Status = 0x%x, AFC Status = 0x%x\n", - __func__, lock_status, afc_status); - - return 0; -} - -static int mt2131_init(struct dvb_frontend *fe) -{ - struct mt2131_priv *priv = fe->tuner_priv; - int ret; - dprintk(1, "%s()\n", __func__); - - if ((ret = mt2131_writeregs(priv, mt2131_config1, - sizeof(mt2131_config1))) < 0) - return ret; - - mt2131_writereg(priv, 0x0b, 0x09); - mt2131_writereg(priv, 0x15, 0x47); - mt2131_writereg(priv, 0x07, 0xf2); - mt2131_writereg(priv, 0x0b, 0x01); - - if ((ret = mt2131_writeregs(priv, mt2131_config2, - sizeof(mt2131_config2))) < 0) - return ret; - - return ret; -} - -static int mt2131_release(struct dvb_frontend *fe) -{ - dprintk(1, "%s()\n", __func__); - kfree(fe->tuner_priv); - fe->tuner_priv = NULL; - return 0; -} - -static const struct dvb_tuner_ops mt2131_tuner_ops = { - .info = { - .name = "Microtune MT2131", - .frequency_min = 48000000, - .frequency_max = 860000000, - .frequency_step = 50000, - }, - - .release = mt2131_release, - .init = mt2131_init, - - .set_params = mt2131_set_params, - .get_frequency = mt2131_get_frequency, - .get_bandwidth = mt2131_get_bandwidth, - .get_status = mt2131_get_status -}; - -struct dvb_frontend * mt2131_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct mt2131_config *cfg, u16 if1) -{ - struct mt2131_priv *priv = NULL; - u8 id = 0; - - dprintk(1, "%s()\n", __func__); - - priv = kzalloc(sizeof(struct mt2131_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; - - priv->cfg = cfg; - priv->bandwidth = 6000000; /* 6MHz */ - priv->i2c = i2c; - - if (mt2131_readreg(priv, 0, &id) != 0) { - kfree(priv); - return NULL; - } - if ( (id != 0x3E) && (id != 0x3F) ) { - printk(KERN_ERR "MT2131: Device not found at addr 0x%02x\n", - cfg->i2c_address); - kfree(priv); - return NULL; - } - - printk(KERN_INFO "MT2131: successfully identified at address 0x%02x\n", - cfg->i2c_address); - memcpy(&fe->ops.tuner_ops, &mt2131_tuner_ops, - sizeof(struct dvb_tuner_ops)); - - fe->tuner_priv = priv; - return fe; -} -EXPORT_SYMBOL(mt2131_attach); - -MODULE_AUTHOR("Steven Toth"); -MODULE_DESCRIPTION("Microtune MT2131 silicon tuner driver"); -MODULE_LICENSE("GPL"); - -/* - * Local variables: - * c-basic-offset: 8 - */ diff --git a/drivers/media/dvb/frontends/mt2131.h b/drivers/media/dvb/frontends/mt2131.h deleted file mode 100644 index 606d8576bc9..00000000000 --- a/drivers/media/dvb/frontends/mt2131.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Driver for Microtune MT2131 "QAM/8VSB single chip tuner" - * - * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MT2131_H__ -#define __MT2131_H__ - -struct dvb_frontend; -struct i2c_adapter; - -struct mt2131_config { - u8 i2c_address; - u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */ -}; - -#if defined(CONFIG_DVB_TUNER_MT2131) || (defined(CONFIG_DVB_TUNER_MT2131_MODULE) && defined(MODULE)) -extern struct dvb_frontend* mt2131_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct mt2131_config *cfg, - u16 if1); -#else -static inline struct dvb_frontend* mt2131_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct mt2131_config *cfg, - u16 if1) -{ - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return NULL; -} -#endif /* CONFIG_DVB_TUNER_MT2131 */ - -#endif /* __MT2131_H__ */ - -/* - * Local variables: - * c-basic-offset: 8 - */ diff --git a/drivers/media/dvb/frontends/mt2131_priv.h b/drivers/media/dvb/frontends/mt2131_priv.h deleted file mode 100644 index e930759c2c0..00000000000 --- a/drivers/media/dvb/frontends/mt2131_priv.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Driver for Microtune MT2131 "QAM/8VSB single chip tuner" - * - * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MT2131_PRIV_H__ -#define __MT2131_PRIV_H__ - -/* Regs */ -#define MT2131_PWR 0x07 -#define MT2131_UPC_1 0x0b -#define MT2131_AGC_RL 0x10 -#define MT2131_MISC_2 0x15 - -/* frequency values in KHz */ -#define MT2131_IF1 1220 -#define MT2131_IF2 44000 -#define MT2131_FREF 16000 - -struct mt2131_priv { - struct mt2131_config *cfg; - struct i2c_adapter *i2c; - - u32 frequency; - u32 bandwidth; -}; - -#endif /* __MT2131_PRIV_H__ */ - -/* - * Local variables: - * c-basic-offset: 8 - */ diff --git a/drivers/media/dvb/frontends/mt2266.c b/drivers/media/dvb/frontends/mt2266.c deleted file mode 100644 index 54b18f94b14..00000000000 --- a/drivers/media/dvb/frontends/mt2266.c +++ /dev/null @@ -1,351 +0,0 @@ -/* - * Driver for Microtune MT2266 "Direct conversion low power broadband tuner" - * - * Copyright (c) 2007 Olivier DANET <odanet@caramail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/dvb/frontend.h> -#include <linux/i2c.h> - -#include "dvb_frontend.h" -#include "mt2266.h" - -#define I2C_ADDRESS 0x60 - -#define REG_PART_REV 0 -#define REG_TUNE 1 -#define REG_BAND 6 -#define REG_BANDWIDTH 8 -#define REG_LOCK 0x12 - -#define PART_REV 0x85 - -struct mt2266_priv { - struct mt2266_config *cfg; - struct i2c_adapter *i2c; - - u32 frequency; - u32 bandwidth; - u8 band; -}; - -#define MT2266_VHF 1 -#define MT2266_UHF 0 - -/* Here, frequencies are expressed in kiloHertz to avoid 32 bits overflows */ - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - -#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2266: " args); printk("\n"); }} while (0) - -// Reads a single register -static int mt2266_readreg(struct mt2266_priv *priv, u8 reg, u8 *val) -{ - struct i2c_msg msg[2] = { - { .addr = priv->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 }, - { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val, .len = 1 }, - }; - if (i2c_transfer(priv->i2c, msg, 2) != 2) { - printk(KERN_WARNING "MT2266 I2C read failed\n"); - return -EREMOTEIO; - } - return 0; -} - -// Writes a single register -static int mt2266_writereg(struct mt2266_priv *priv, u8 reg, u8 val) -{ - u8 buf[2] = { reg, val }; - struct i2c_msg msg = { - .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2 - }; - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_WARNING "MT2266 I2C write failed\n"); - return -EREMOTEIO; - } - return 0; -} - -// Writes a set of consecutive registers -static int mt2266_writeregs(struct mt2266_priv *priv,u8 *buf, u8 len) -{ - struct i2c_msg msg = { - .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = len - }; - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_WARNING "MT2266 I2C write failed (len=%i)\n",(int)len); - return -EREMOTEIO; - } - return 0; -} - -// Initialisation sequences -static u8 mt2266_init1[] = { REG_TUNE, 0x00, 0x00, 0x28, - 0x00, 0x52, 0x99, 0x3f }; - -static u8 mt2266_init2[] = { - 0x17, 0x6d, 0x71, 0x61, 0xc0, 0xbf, 0xff, 0xdc, 0x00, 0x0a, 0xd4, - 0x03, 0x64, 0x64, 0x64, 0x64, 0x22, 0xaa, 0xf2, 0x1e, 0x80, 0x14, - 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x7f, 0x5e, 0x3f, 0xff, 0xff, - 0xff, 0x00, 0x77, 0x0f, 0x2d -}; - -static u8 mt2266_init_8mhz[] = { REG_BANDWIDTH, 0x22, 0x22, 0x22, 0x22, - 0x22, 0x22, 0x22, 0x22 }; - -static u8 mt2266_init_7mhz[] = { REG_BANDWIDTH, 0x32, 0x32, 0x32, 0x32, - 0x32, 0x32, 0x32, 0x32 }; - -static u8 mt2266_init_6mhz[] = { REG_BANDWIDTH, 0xa7, 0xa7, 0xa7, 0xa7, - 0xa7, 0xa7, 0xa7, 0xa7 }; - -static u8 mt2266_uhf[] = { 0x1d, 0xdc, 0x00, 0x0a, 0xd4, 0x03, 0x64, 0x64, - 0x64, 0x64, 0x22, 0xaa, 0xf2, 0x1e, 0x80, 0x14 }; - -static u8 mt2266_vhf[] = { 0x1d, 0xfe, 0x00, 0x00, 0xb4, 0x03, 0xa5, 0xa5, - 0xa5, 0xa5, 0x82, 0xaa, 0xf1, 0x17, 0x80, 0x1f }; - -#define FREF 30000 // Quartz oscillator 30 MHz - -static int mt2266_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) -{ - struct mt2266_priv *priv; - int ret=0; - u32 freq; - u32 tune; - u8 lnaband; - u8 b[10]; - int i; - u8 band; - - priv = fe->tuner_priv; - - freq = params->frequency / 1000; // Hz -> kHz - if (freq < 470000 && freq > 230000) - return -EINVAL; /* Gap between VHF and UHF bands */ - priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0; - priv->frequency = freq * 1000; - - tune = 2 * freq * (8192/16) / (FREF/16); - band = (freq < 300000) ? MT2266_VHF : MT2266_UHF; - if (band == MT2266_VHF) - tune *= 2; - - switch (params->u.ofdm.bandwidth) { - case BANDWIDTH_6_MHZ: - mt2266_writeregs(priv, mt2266_init_6mhz, - sizeof(mt2266_init_6mhz)); - break; - case BANDWIDTH_7_MHZ: - mt2266_writeregs(priv, mt2266_init_7mhz, - sizeof(mt2266_init_7mhz)); - break; - case BANDWIDTH_8_MHZ: - default: - mt2266_writeregs(priv, mt2266_init_8mhz, - sizeof(mt2266_init_8mhz)); - break; - } - - if (band == MT2266_VHF && priv->band == MT2266_UHF) { - dprintk("Switch from UHF to VHF"); - mt2266_writereg(priv, 0x05, 0x04); - mt2266_writereg(priv, 0x19, 0x61); - mt2266_writeregs(priv, mt2266_vhf, sizeof(mt2266_vhf)); - } else if (band == MT2266_UHF && priv->band == MT2266_VHF) { - dprintk("Switch from VHF to UHF"); - mt2266_writereg(priv, 0x05, 0x52); - mt2266_writereg(priv, 0x19, 0x61); - mt2266_writeregs(priv, mt2266_uhf, sizeof(mt2266_uhf)); - } - msleep(10); - - if (freq <= 495000) - lnaband = 0xEE; - else if (freq <= 525000) - lnaband = 0xDD; - else if (freq <= 550000) - lnaband = 0xCC; - else if (freq <= 580000) - lnaband = 0xBB; - else if (freq <= 605000) - lnaband = 0xAA; - else if (freq <= 630000) - lnaband = 0x99; - else if (freq <= 655000) - lnaband = 0x88; - else if (freq <= 685000) - lnaband = 0x77; - else if (freq <= 710000) - lnaband = 0x66; - else if (freq <= 735000) - lnaband = 0x55; - else if (freq <= 765000) - lnaband = 0x44; - else if (freq <= 802000) - lnaband = 0x33; - else if (freq <= 840000) - lnaband = 0x22; - else - lnaband = 0x11; - - b[0] = REG_TUNE; - b[1] = (tune >> 8) & 0x1F; - b[2] = tune & 0xFF; - b[3] = tune >> 13; - mt2266_writeregs(priv,b,4); - - dprintk("set_parms: tune=%d band=%d %s", - (int) tune, (int) lnaband, - (band == MT2266_UHF) ? "UHF" : "VHF"); - dprintk("set_parms: [1..3]: %2x %2x %2x", - (int) b[1], (int) b[2], (int)b[3]); - - if (band == MT2266_UHF) { - b[0] = 0x05; - b[1] = (priv->band == MT2266_VHF) ? 0x52 : 0x62; - b[2] = lnaband; - mt2266_writeregs(priv, b, 3); - } - - /* Wait for pll lock or timeout */ - i = 0; - do { - mt2266_readreg(priv,REG_LOCK,b); - if (b[0] & 0x40) - break; - msleep(10); - i++; - } while (i<10); - dprintk("Lock when i=%i",(int)i); - - if (band == MT2266_UHF && priv->band == MT2266_VHF) - mt2266_writereg(priv, 0x05, 0x62); - - priv->band = band; - - return ret; -} - -static void mt2266_calibrate(struct mt2266_priv *priv) -{ - mt2266_writereg(priv, 0x11, 0x03); - mt2266_writereg(priv, 0x11, 0x01); - mt2266_writeregs(priv, mt2266_init1, sizeof(mt2266_init1)); - mt2266_writeregs(priv, mt2266_init2, sizeof(mt2266_init2)); - mt2266_writereg(priv, 0x33, 0x5e); - mt2266_writereg(priv, 0x10, 0x10); - mt2266_writereg(priv, 0x10, 0x00); - mt2266_writeregs(priv, mt2266_init_8mhz, sizeof(mt2266_init_8mhz)); - msleep(25); - mt2266_writereg(priv, 0x17, 0x6d); - mt2266_writereg(priv, 0x1c, 0x00); - msleep(75); - mt2266_writereg(priv, 0x17, 0x6d); - mt2266_writereg(priv, 0x1c, 0xff); -} - -static int mt2266_get_frequency(struct dvb_frontend *fe, u32 *frequency) -{ - struct mt2266_priv *priv = fe->tuner_priv; - *frequency = priv->frequency; - return 0; -} - -static int mt2266_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) -{ - struct mt2266_priv *priv = fe->tuner_priv; - *bandwidth = priv->bandwidth; - return 0; -} - -static int mt2266_init(struct dvb_frontend *fe) -{ - int ret; - struct mt2266_priv *priv = fe->tuner_priv; - ret = mt2266_writereg(priv, 0x17, 0x6d); - if (ret < 0) - return ret; - ret = mt2266_writereg(priv, 0x1c, 0xff); - if (ret < 0) - return ret; - return 0; -} - -static int mt2266_sleep(struct dvb_frontend *fe) -{ - struct mt2266_priv *priv = fe->tuner_priv; - mt2266_writereg(priv, 0x17, 0x6d); - mt2266_writereg(priv, 0x1c, 0x00); - return 0; -} - -static int mt2266_release(struct dvb_frontend *fe) -{ - kfree(fe->tuner_priv); - fe->tuner_priv = NULL; - return 0; -} - -static const struct dvb_tuner_ops mt2266_tuner_ops = { - .info = { - .name = "Microtune MT2266", - .frequency_min = 174000000, - .frequency_max = 862000000, - .frequency_step = 50000, - }, - .release = mt2266_release, - .init = mt2266_init, - .sleep = mt2266_sleep, - .set_params = mt2266_set_params, - .get_frequency = mt2266_get_frequency, - .get_bandwidth = mt2266_get_bandwidth -}; - -struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg) -{ - struct mt2266_priv *priv = NULL; - u8 id = 0; - - priv = kzalloc(sizeof(struct mt2266_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; - - priv->cfg = cfg; - priv->i2c = i2c; - priv->band = MT2266_UHF; - - if (mt2266_readreg(priv, 0, &id)) { - kfree(priv); - return NULL; - } - if (id != PART_REV) { - kfree(priv); - return NULL; - } - printk(KERN_INFO "MT2266: successfully identified\n"); - memcpy(&fe->ops.tuner_ops, &mt2266_tuner_ops, sizeof(struct dvb_tuner_ops)); - - fe->tuner_priv = priv; - mt2266_calibrate(priv); - return fe; -} -EXPORT_SYMBOL(mt2266_attach); - -MODULE_AUTHOR("Olivier DANET"); -MODULE_DESCRIPTION("Microtune MT2266 silicon tuner driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/mt2266.h b/drivers/media/dvb/frontends/mt2266.h deleted file mode 100644 index c5113efe333..00000000000 --- a/drivers/media/dvb/frontends/mt2266.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Driver for Microtune MT2266 "Direct conversion low power broadband tuner" - * - * Copyright (c) 2007 Olivier DANET <odanet@caramail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MT2266_H -#define MT2266_H - -struct dvb_frontend; -struct i2c_adapter; - -struct mt2266_config { - u8 i2c_address; -}; - -#if defined(CONFIG_DVB_TUNER_MT2266) || (defined(CONFIG_DVB_TUNER_MT2266_MODULE) && defined(MODULE)) -extern struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg); -#else -static inline struct dvb_frontend * mt2266_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2266_config *cfg) -{ - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return NULL; -} -#endif // CONFIG_DVB_TUNER_MT2266 - -#endif diff --git a/drivers/media/dvb/frontends/qt1010.c b/drivers/media/dvb/frontends/qt1010.c deleted file mode 100644 index 825aa1412e6..00000000000 --- a/drivers/media/dvb/frontends/qt1010.c +++ /dev/null @@ -1,485 +0,0 @@ -/* - * Driver for Quantek QT1010 silicon tuner - * - * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> - * Aapo Tahkola <aet@rasterburn.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include "qt1010.h" -#include "qt1010_priv.h" - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - -#define dprintk(args...) \ - do { \ - if (debug) printk(KERN_DEBUG "QT1010: " args); \ - } while (0) - -/* read single register */ -static int qt1010_readreg(struct qt1010_priv *priv, u8 reg, u8 *val) -{ - struct i2c_msg msg[2] = { - { .addr = priv->cfg->i2c_address, - .flags = 0, .buf = ®, .len = 1 }, - { .addr = priv->cfg->i2c_address, - .flags = I2C_M_RD, .buf = val, .len = 1 }, - }; - - if (i2c_transfer(priv->i2c, msg, 2) != 2) { - printk(KERN_WARNING "qt1010 I2C read failed\n"); - return -EREMOTEIO; - } - return 0; -} - -/* write single register */ -static int qt1010_writereg(struct qt1010_priv *priv, u8 reg, u8 val) -{ - u8 buf[2] = { reg, val }; - struct i2c_msg msg = { .addr = priv->cfg->i2c_address, - .flags = 0, .buf = buf, .len = 2 }; - - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_WARNING "qt1010 I2C write failed\n"); - return -EREMOTEIO; - } - return 0; -} - -/* dump all registers */ -static void qt1010_dump_regs(struct qt1010_priv *priv) -{ - char buf[52], buf2[4]; - u8 reg, val; - - for (reg = 0; ; reg++) { - if (reg % 16 == 0) { - if (reg) - printk("%s\n", buf); - sprintf(buf, "%02x: ", reg); - } - if (qt1010_readreg(priv, reg, &val) == 0) - sprintf(buf2, "%02x ", val); - else - strcpy(buf2, "-- "); - strcat(buf, buf2); - if (reg == 0x2f) - break; - } - printk("%s\n", buf); -} - -static int qt1010_set_params(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) -{ - struct qt1010_priv *priv; - int err; - u32 freq, div, mod1, mod2; - u8 i, tmpval, reg05; - qt1010_i2c_oper_t rd[48] = { - { QT1010_WR, 0x01, 0x80 }, - { QT1010_WR, 0x02, 0x3f }, - { QT1010_WR, 0x05, 0xff }, /* 02 c write */ - { QT1010_WR, 0x06, 0x44 }, - { QT1010_WR, 0x07, 0xff }, /* 04 c write */ - { QT1010_WR, 0x08, 0x08 }, - { QT1010_WR, 0x09, 0xff }, /* 06 c write */ - { QT1010_WR, 0x0a, 0xff }, /* 07 c write */ - { QT1010_WR, 0x0b, 0xff }, /* 08 c write */ - { QT1010_WR, 0x0c, 0xe1 }, - { QT1010_WR, 0x1a, 0xff }, /* 10 c write */ - { QT1010_WR, 0x1b, 0x00 }, - { QT1010_WR, 0x1c, 0x89 }, - { QT1010_WR, 0x11, 0xff }, /* 13 c write */ - { QT1010_WR, 0x12, 0xff }, /* 14 c write */ - { QT1010_WR, 0x22, 0xff }, /* 15 c write */ - { QT1010_WR, 0x1e, 0x00 }, - { QT1010_WR, 0x1e, 0xd0 }, - { QT1010_RD, 0x22, 0xff }, /* 16 c read */ - { QT1010_WR, 0x1e, 0x00 }, - { QT1010_RD, 0x05, 0xff }, /* 20 c read */ - { QT1010_RD, 0x22, 0xff }, /* 21 c read */ - { QT1010_WR, 0x23, 0xd0 }, - { QT1010_WR, 0x1e, 0x00 }, - { QT1010_WR, 0x1e, 0xe0 }, - { QT1010_RD, 0x23, 0xff }, /* 25 c read */ - { QT1010_RD, 0x23, 0xff }, /* 26 c read */ - { QT1010_WR, 0x1e, 0x00 }, - { QT1010_WR, 0x24, 0xd0 }, - { QT1010_WR, 0x1e, 0x00 }, - { QT1010_WR, 0x1e, 0xf0 }, - { QT1010_RD, 0x24, 0xff }, /* 31 c read */ - { QT1010_WR, 0x1e, 0x00 }, - { QT1010_WR, 0x14, 0x7f }, - { QT1010_WR, 0x15, 0x7f }, - { QT1010_WR, 0x05, 0xff }, /* 35 c write */ - { QT1010_WR, 0x06, 0x00 }, - { QT1010_WR, 0x15, 0x1f }, - { QT1010_WR, 0x16, 0xff }, - { QT1010_WR, 0x18, 0xff }, - { QT1010_WR, 0x1f, 0xff }, /* 40 c write */ - { QT1010_WR, 0x20, 0xff }, /* 41 c write */ - { QT1010_WR, 0x21, 0x53 }, - { QT1010_WR, 0x25, 0xff }, /* 43 c write */ - { QT1010_WR, 0x26, 0x15 }, - { QT1010_WR, 0x00, 0xff }, /* 45 c write */ - { QT1010_WR, 0x02, 0x00 }, - { QT1010_WR, 0x01, 0x00 } - }; - -#define FREQ1 32000000 /* 32 MHz */ -#define FREQ2 4000000 /* 4 MHz Quartz oscillator in the stick? */ - - priv = fe->tuner_priv; - freq = params->frequency; - div = (freq + QT1010_OFFSET) / QT1010_STEP; - freq = (div * QT1010_STEP) - QT1010_OFFSET; - mod1 = (freq + QT1010_OFFSET) % FREQ1; - mod2 = (freq + QT1010_OFFSET) % FREQ2; - priv->bandwidth = - (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0; - priv->frequency = freq; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ - - /* reg 05 base value */ - if (freq < 290000000) reg05 = 0x14; /* 290 MHz */ - else if (freq < 610000000) reg05 = 0x34; /* 610 MHz */ - else if (freq < 802000000) reg05 = 0x54; /* 802 MHz */ - else reg05 = 0x74; - - /* 0x5 */ - rd[2].val = reg05; - - /* 07 - set frequency: 32 MHz scale */ - rd[4].val = (freq + QT1010_OFFSET) / FREQ1; - - /* 09 - changes every 8/24 MHz */ - if (mod1 < 8000000) rd[6].val = 0x1d; - else rd[6].val = 0x1c; - - /* 0a - set frequency: 4 MHz scale (max 28 MHz) */ - if (mod1 < 1*FREQ2) rd[7].val = 0x09; /* +0 MHz */ - else if (mod1 < 2*FREQ2) rd[7].val = 0x08; /* +4 MHz */ - else if (mod1 < 3*FREQ2) rd[7].val = 0x0f; /* +8 MHz */ - else if (mod1 < 4*FREQ2) rd[7].val = 0x0e; /* +12 MHz */ - else if (mod1 < 5*FREQ2) rd[7].val = 0x0d; /* +16 MHz */ - else if (mod1 < 6*FREQ2) rd[7].val = 0x0c; /* +20 MHz */ - else if (mod1 < 7*FREQ2) rd[7].val = 0x0b; /* +24 MHz */ - else rd[7].val = 0x0a; /* +28 MHz */ - - /* 0b - changes every 2/2 MHz */ - if (mod2 < 2000000) rd[8].val = 0x45; - else rd[8].val = 0x44; - - /* 1a - set frequency: 125 kHz scale (max 3875 kHz)*/ - tmpval = 0x78; /* byte, overflows intentionally */ - rd[10].val = tmpval-((mod2/QT1010_STEP)*0x08); - - /* 11 */ - rd[13].val = 0xfd; /* TODO: correct value calculation */ - - /* 12 */ - rd[14].val = 0x91; /* TODO: correct value calculation */ - - /* 22 */ - if (freq < 450000000) rd[15].val = 0xd0; /* 450 MHz */ - else if (freq < 482000000) rd[15].val = 0xd1; /* 482 MHz */ - else if (freq < 514000000) rd[15].val = 0xd4; /* 514 MHz */ - else if (freq < 546000000) rd[15].val = 0xd7; /* 546 MHz */ - else if (freq < 610000000) rd[15].val = 0xda; /* 610 MHz */ - else rd[15].val = 0xd0; - - /* 05 */ - rd[35].val = (reg05 & 0xf0); - - /* 1f */ - if (mod1 < 8000000) tmpval = 0x00; - else if (mod1 < 12000000) tmpval = 0x01; - else if (mod1 < 16000000) tmpval = 0x02; - else if (mod1 < 24000000) tmpval = 0x03; - else if (mod1 < 28000000) tmpval = 0x04; - else tmpval = 0x05; - rd[40].val = (priv->reg1f_init_val + 0x0e + tmpval); - - /* 20 */ - if (mod1 < 8000000) tmpval = 0x00; - else if (mod1 < 12000000) tmpval = 0x01; - else if (mod1 < 20000000) tmpval = 0x02; - else if (mod1 < 24000000) tmpval = 0x03; - else if (mod1 < 28000000) tmpval = 0x04; - else tmpval = 0x05; - rd[41].val = (priv->reg20_init_val + 0x0d + tmpval); - - /* 25 */ - rd[43].val = priv->reg25_init_val; - - /* 00 */ - rd[45].val = 0x92; /* TODO: correct value calculation */ - - dprintk("freq:%u 05:%02x 07:%02x 09:%02x 0a:%02x 0b:%02x " \ - "1a:%02x 11:%02x 12:%02x 22:%02x 05:%02x 1f:%02x " \ - "20:%02x 25:%02x 00:%02x", \ - freq, rd[2].val, rd[4].val, rd[6].val, rd[7].val, rd[8].val, \ - rd[10].val, rd[13].val, rd[14].val, rd[15].val, rd[35].val, \ - rd[40].val, rd[41].val, rd[43].val, rd[45].val); - - for (i = 0; i < ARRAY_SIZE(rd); i++) { - if (rd[i].oper == QT1010_WR) { - err = qt1010_writereg(priv, rd[i].reg, rd[i].val); - } else { /* read is required to proper locking */ - err = qt1010_readreg(priv, rd[i].reg, &tmpval); - } - if (err) return err; - } - - if (debug) - qt1010_dump_regs(priv); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ - - return 0; -} - -static int qt1010_init_meas1(struct qt1010_priv *priv, - u8 oper, u8 reg, u8 reg_init_val, u8 *retval) -{ - u8 i, val1, val2; - int err; - - qt1010_i2c_oper_t i2c_data[] = { - { QT1010_WR, reg, reg_init_val }, - { QT1010_WR, 0x1e, 0x00 }, - { QT1010_WR, 0x1e, oper }, - { QT1010_RD, reg, 0xff } - }; - - for (i = 0; i < ARRAY_SIZE(i2c_data); i++) { - if (i2c_data[i].oper == QT1010_WR) { - err = qt1010_writereg(priv, i2c_data[i].reg, - i2c_data[i].val); - } else { - err = qt1010_readreg(priv, i2c_data[i].reg, &val2); - } - if (err) return err; - } - - do { - val1 = val2; - err = qt1010_readreg(priv, reg, &val2); - if (err) return err; - dprintk("compare reg:%02x %02x %02x", reg, val1, val2); - } while (val1 != val2); - *retval = val1; - - return qt1010_writereg(priv, 0x1e, 0x00); -} - -static u8 qt1010_init_meas2(struct qt1010_priv *priv, - u8 reg_init_val, u8 *retval) -{ - u8 i, val; - int err; - qt1010_i2c_oper_t i2c_data[] = { - { QT1010_WR, 0x07, reg_init_val }, - { QT1010_WR, 0x22, 0xd0 }, - { QT1010_WR, 0x1e, 0x00 }, - { QT1010_WR, 0x1e, 0xd0 }, - { QT1010_RD, 0x22, 0xff }, - { QT1010_WR, 0x1e, 0x00 }, - { QT1010_WR, 0x22, 0xff } - }; - for (i = 0; i < ARRAY_SIZE(i2c_data); i++) { - if (i2c_data[i].oper == QT1010_WR) { - err = qt1010_writereg(priv, i2c_data[i].reg, - i2c_data[i].val); - } else { - err = qt1010_readreg(priv, i2c_data[i].reg, &val); - } - if (err) return err; - } - *retval = val; - return 0; -} - -static int qt1010_init(struct dvb_frontend *fe) -{ - struct qt1010_priv *priv = fe->tuner_priv; - struct dvb_frontend_parameters params; - int err = 0; - u8 i, tmpval, *valptr = NULL; - - qt1010_i2c_oper_t i2c_data[] = { - { QT1010_WR, 0x01, 0x80 }, - { QT1010_WR, 0x0d, 0x84 }, - { QT1010_WR, 0x0e, 0xb7 }, - { QT1010_WR, 0x2a, 0x23 }, - { QT1010_WR, 0x2c, 0xdc }, - { QT1010_M1, 0x25, 0x40 }, /* get reg 25 init value */ - { QT1010_M1, 0x81, 0xff }, /* get reg 25 init value */ - { QT1010_WR, 0x2b, 0x70 }, - { QT1010_WR, 0x2a, 0x23 }, - { QT1010_M1, 0x26, 0x08 }, - { QT1010_M1, 0x82, 0xff }, - { QT1010_WR, 0x05, 0x14 }, - { QT1010_WR, 0x06, 0x44 }, - { QT1010_WR, 0x07, 0x28 }, - { QT1010_WR, 0x08, 0x0b }, - { QT1010_WR, 0x11, 0xfd }, - { QT1010_M1, 0x22, 0x0d }, - { QT1010_M1, 0xd0, 0xff }, - { QT1010_WR, 0x06, 0x40 }, - { QT1010_WR, 0x16, 0xf0 }, - { QT1010_WR, 0x02, 0x38 }, - { QT1010_WR, 0x03, 0x18 }, - { QT1010_WR, 0x20, 0xe0 }, - { QT1010_M1, 0x1f, 0x20 }, /* get reg 1f init value */ - { QT1010_M1, 0x84, 0xff }, /* get reg 1f init value */ - { QT1010_RD, 0x20, 0x20 }, /* get reg 20 init value */ - { QT1010_WR, 0x03, 0x19 }, - { QT1010_WR, 0x02, 0x3f }, - { QT1010_WR, 0x21, 0x53 }, - { QT1010_RD, 0x21, 0xff }, - { QT1010_WR, 0x11, 0xfd }, - { QT1010_WR, 0x05, 0x34 }, - { QT1010_WR, 0x06, 0x44 }, - { QT1010_WR, 0x08, 0x08 } - }; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ - - for (i = 0; i < ARRAY_SIZE(i2c_data); i++) { - switch (i2c_data[i].oper) { - case QT1010_WR: - err = qt1010_writereg(priv, i2c_data[i].reg, - i2c_data[i].val); - break; - case QT1010_RD: - if (i2c_data[i].val == 0x20) - valptr = &priv->reg20_init_val; - else - valptr = &tmpval; - err = qt1010_readreg(priv, i2c_data[i].reg, valptr); - break; - case QT1010_M1: - if (i2c_data[i].val == 0x25) - valptr = &priv->reg25_init_val; - else if (i2c_data[i].val == 0x1f) - valptr = &priv->reg1f_init_val; - else - valptr = &tmpval; - err = qt1010_init_meas1(priv, i2c_data[i+1].reg, - i2c_data[i].reg, - i2c_data[i].val, valptr); - i++; - break; - } - if (err) return err; - } - - for (i = 0x31; i < 0x3a; i++) /* 0x31 - 0x39 */ - if ((err = qt1010_init_meas2(priv, i, &tmpval))) - return err; - - params.frequency = 545000000; /* Sigmatek DVB-110 545000000 */ - /* MSI Megasky 580 GL861 533000000 */ - return qt1010_set_params(fe, ¶ms); -} - -static int qt1010_release(struct dvb_frontend *fe) -{ - kfree(fe->tuner_priv); - fe->tuner_priv = NULL; - return 0; -} - -static int qt1010_get_frequency(struct dvb_frontend *fe, u32 *frequency) -{ - struct qt1010_priv *priv = fe->tuner_priv; - *frequency = priv->frequency; - return 0; -} - -static int qt1010_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) -{ - struct qt1010_priv *priv = fe->tuner_priv; - *bandwidth = priv->bandwidth; - return 0; -} - -static const struct dvb_tuner_ops qt1010_tuner_ops = { - .info = { - .name = "Quantek QT1010", - .frequency_min = QT1010_MIN_FREQ, - .frequency_max = QT1010_MAX_FREQ, - .frequency_step = QT1010_STEP, - }, - - .release = qt1010_release, - .init = qt1010_init, - /* TODO: implement sleep */ - - .set_params = qt1010_set_params, - .get_frequency = qt1010_get_frequency, - .get_bandwidth = qt1010_get_bandwidth -}; - -struct dvb_frontend * qt1010_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct qt1010_config *cfg) -{ - struct qt1010_priv *priv = NULL; - u8 id; - - priv = kzalloc(sizeof(struct qt1010_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; - - priv->cfg = cfg; - priv->i2c = i2c; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ - - - /* Try to detect tuner chip. Probably this is not correct register. */ - if (qt1010_readreg(priv, 0x29, &id) != 0 || (id != 0x39)) { - kfree(priv); - return NULL; - } - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ - - printk(KERN_INFO "Quantek QT1010 successfully identified.\n"); - memcpy(&fe->ops.tuner_ops, &qt1010_tuner_ops, - sizeof(struct dvb_tuner_ops)); - - fe->tuner_priv = priv; - return fe; -} -EXPORT_SYMBOL(qt1010_attach); - -MODULE_DESCRIPTION("Quantek QT1010 silicon tuner driver"); -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/qt1010.h b/drivers/media/dvb/frontends/qt1010.h deleted file mode 100644 index cff6a7ca538..00000000000 --- a/drivers/media/dvb/frontends/qt1010.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Driver for Quantek QT1010 silicon tuner - * - * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> - * Aapo Tahkola <aet@rasterburn.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef QT1010_H -#define QT1010_H - -#include "dvb_frontend.h" - -struct qt1010_config { - u8 i2c_address; -}; - -/** - * Attach a qt1010 tuner to the supplied frontend structure. - * - * @param fe frontend to attach to - * @param i2c i2c adapter to use - * @param cfg tuner hw based configuration - * @return fe pointer on success, NULL on failure - */ -#if defined(CONFIG_DVB_TUNER_QT1010) || (defined(CONFIG_DVB_TUNER_QT1010_MODULE) && defined(MODULE)) -extern struct dvb_frontend *qt1010_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct qt1010_config *cfg); -#else -static inline struct dvb_frontend *qt1010_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct qt1010_config *cfg) -{ - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return NULL; -} -#endif // CONFIG_DVB_TUNER_QT1010 - -#endif diff --git a/drivers/media/dvb/frontends/qt1010_priv.h b/drivers/media/dvb/frontends/qt1010_priv.h deleted file mode 100644 index 090cf475f09..00000000000 --- a/drivers/media/dvb/frontends/qt1010_priv.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Driver for Quantek QT1010 silicon tuner - * - * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> - * Aapo Tahkola <aet@rasterburn.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef QT1010_PRIV_H -#define QT1010_PRIV_H - -/* -reg def meaning -=== === ======= -00 00 ? -01 a0 ? operation start/stop; start=80, stop=00 -02 00 ? -03 19 ? -04 00 ? -05 00 ? maybe band selection -06 00 ? -07 2b set frequency: 32 MHz scale, n*32 MHz -08 0b ? -09 10 ? changes every 8/24 MHz; values 1d/1c -0a 08 set frequency: 4 MHz scale, n*4 MHz -0b 41 ? changes every 2/2 MHz; values 45/45 -0c e1 ? -0d 94 ? -0e b6 ? -0f 2c ? -10 10 ? -11 f1 ? maybe device specified adjustment -12 11 ? maybe device specified adjustment -13 3f ? -14 1f ? -15 3f ? -16 ff ? -17 ff ? -18 f7 ? -19 80 ? -1a d0 set frequency: 125 kHz scale, n*125 kHz -1b 00 ? -1c 89 ? -1d 00 ? -1e 00 ? looks like operation register; write cmd here, read result from 1f-26 -1f 20 ? chip initialization -20 e0 ? chip initialization -21 20 ? -22 d0 ? -23 d0 ? -24 d0 ? -25 40 ? chip initialization -26 08 ? -27 29 ? -28 55 ? -29 39 ? -2a 13 ? -2b 01 ? -2c ea ? -2d 00 ? -2e 00 ? not used? -2f 00 ? not used? -*/ - -#define QT1010_STEP 125000 /* 125 kHz used by Windows drivers, - hw could be more precise but we don't - know how to use */ -#define QT1010_MIN_FREQ 48000000 /* 48 MHz */ -#define QT1010_MAX_FREQ 860000000 /* 860 MHz */ -#define QT1010_OFFSET 1246000000 /* 1246 MHz */ - -#define QT1010_WR 0 -#define QT1010_RD 1 -#define QT1010_M1 3 - -typedef struct { - u8 oper, reg, val; -} qt1010_i2c_oper_t; - -struct qt1010_priv { - struct qt1010_config *cfg; - struct i2c_adapter *i2c; - - u8 reg1f_init_val; - u8 reg20_init_val; - u8 reg25_init_val; - - u32 frequency; - u32 bandwidth; -}; - -#endif |