diff options
Diffstat (limited to 'drivers/media/i2c/m5mols/m5mols.h')
| -rw-r--r-- | drivers/media/i2c/m5mols/m5mols.h | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/drivers/media/i2c/m5mols/m5mols.h b/drivers/media/i2c/m5mols/m5mols.h new file mode 100644 index 00000000000..86c815be348 --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols.h @@ -0,0 +1,338 @@ +/* + * Header for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim <riverful.kim@samsung.com> + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef M5MOLS_H +#define M5MOLS_H + +#include <media/v4l2-subdev.h> +#include "m5mols_reg.h" + +extern int m5mols_debug; + +enum m5mols_restype { + M5MOLS_RESTYPE_MONITOR, + M5MOLS_RESTYPE_CAPTURE, + M5MOLS_RESTYPE_MAX, +}; + +/** + * struct m5mols_resolution - structure for the resolution + * @type: resolution type according to the pixel code + * @width: width of the resolution + * @height: height of the resolution + * @reg: resolution preset register value + */ +struct m5mols_resolution { + u8 reg; + enum m5mols_restype type; + u16 width; + u16 height; +}; + +/** + * struct m5mols_exif - structure for the EXIF information of M-5MOLS + * @exposure_time: exposure time register value + * @shutter_speed: speed of the shutter register value + * @aperture: aperture register value + * @exposure_bias: it calls also EV bias + * @iso_speed: ISO register value + * @flash: status register value of the flash + * @sdr: status register value of the Subject Distance Range + * @qval: not written exact meaning in document + */ +struct m5mols_exif { + u32 exposure_time; + u32 shutter_speed; + u32 aperture; + u32 brightness; + u32 exposure_bias; + u16 iso_speed; + u16 flash; + u16 sdr; + u16 qval; +}; + +/** + * struct m5mols_capture - Structure for the capture capability + * @exif: EXIF information + * @main: size in bytes of the main image + * @thumb: size in bytes of the thumb image, if it was accompanied + * @total: total size in bytes of the produced image + */ +struct m5mols_capture { + struct m5mols_exif exif; + u32 main; + u32 thumb; + u32 total; +}; + +/** + * struct m5mols_scenemode - structure for the scenemode capability + * @metering: metering light register value + * @ev_bias: EV bias register value + * @wb_mode: mode which means the WhiteBalance is Auto or Manual + * @wb_preset: whitebalance preset register value in the Manual mode + * @chroma_en: register value whether the Chroma capability is enabled or not + * @chroma_lvl: chroma's level register value + * @edge_en: register value Whether the Edge capability is enabled or not + * @edge_lvl: edge's level register value + * @af_range: Auto Focus's range + * @fd_mode: Face Detection mode + * @mcc: Multi-axis Color Conversion which means emotion color + * @light: status of the Light + * @flash: status of the Flash + * @tone: Tone color which means Contrast + * @iso: ISO register value + * @capt_mode: Mode of the Image Stabilization while the camera capturing + * @wdr: Wide Dynamic Range register value + * + * The each value according to each scenemode is recommended in the documents. + */ +struct m5mols_scenemode { + u8 metering; + u8 ev_bias; + u8 wb_mode; + u8 wb_preset; + u8 chroma_en; + u8 chroma_lvl; + u8 edge_en; + u8 edge_lvl; + u8 af_range; + u8 fd_mode; + u8 mcc; + u8 light; + u8 flash; + u8 tone; + u8 iso; + u8 capt_mode; + u8 wdr; +}; + +/** + * struct m5mols_version - firmware version information + * @customer: customer information + * @project: version of project information according to customer + * @fw: firmware revision + * @hw: hardware revision + * @param: version of the parameter + * @awb: Auto WhiteBalance algorithm version + * @str: information about manufacturer and packaging vendor + * @af: Auto Focus version + * + * The register offset starts the customer version at 0x0, and it ends + * the awb version at 0x09. The customer, project information occupies 1 bytes + * each. And also the fw, hw, param, awb each requires 2 bytes. The str is + * unique string associated with firmware's version. It includes information + * about manufacturer and the vendor of the sensor's packaging. The least + * significant 2 bytes of the string indicate packaging manufacturer. + */ +#define VERSION_STRING_SIZE 22 +struct m5mols_version { + u8 customer; + u8 project; + u16 fw; + u16 hw; + u16 param; + u16 awb; + u8 str[VERSION_STRING_SIZE]; + u8 af; +}; + +/** + * struct m5mols_info - M-5MOLS driver data structure + * @pdata: platform data + * @sd: v4l-subdev instance + * @pad: media pad + * @irq_waitq: waitqueue for the capture + * @irq_done: set to 1 in the interrupt handler + * @handle: control handler + * @auto_exposure: auto/manual exposure control + * @exposure_bias: exposure compensation control + * @exposure: manual exposure control + * @metering: exposure metering control + * @auto_iso: auto/manual ISO sensitivity control + * @iso: manual ISO sensitivity control + * @auto_wb: auto white balance control + * @lock_3a: 3A lock control + * @colorfx: color effect control + * @saturation: saturation control + * @zoom: zoom control + * @wdr: wide dynamic range control + * @stabilization: image stabilization control + * @jpeg_quality: JPEG compression quality control + * @set_power: optional power callback to the board code + * @lock: mutex protecting the structure fields below + * @ffmt: current fmt according to resolution type + * @res_type: current resolution type + * @ver: information of the version + * @cap: the capture mode attributes + * @isp_ready: 1 when the ISP controller has completed booting + * @power: current sensor's power status + * @ctrl_sync: 1 when the control handler state is restored in H/W + * @resolution: register value for current resolution + * @mode: register value for current operation mode + */ +struct m5mols_info { + const struct m5mols_platform_data *pdata; + struct v4l2_subdev sd; + struct media_pad pad; + + wait_queue_head_t irq_waitq; + atomic_t irq_done; + + struct v4l2_ctrl_handler handle; + struct { + /* exposure/exposure bias/auto exposure cluster */ + struct v4l2_ctrl *auto_exposure; + struct v4l2_ctrl *exposure_bias; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *metering; + }; + struct { + /* iso/auto iso cluster */ + struct v4l2_ctrl *auto_iso; + struct v4l2_ctrl *iso; + }; + struct v4l2_ctrl *auto_wb; + + struct v4l2_ctrl *lock_3a; + struct v4l2_ctrl *colorfx; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *zoom; + struct v4l2_ctrl *wdr; + struct v4l2_ctrl *stabilization; + struct v4l2_ctrl *jpeg_quality; + + int (*set_power)(struct device *dev, int on); + + struct mutex lock; + + struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX]; + int res_type; + + struct m5mols_version ver; + struct m5mols_capture cap; + + unsigned int isp_ready:1; + unsigned int power:1; + unsigned int ctrl_sync:1; + + u8 resolution; + u8 mode; +}; + +#define is_available_af(__info) (__info->ver.af) +#define is_code(__code, __type) (__code == m5mols_default_ffmt[__type].code) +#define is_manufacturer(__info, __manufacturer) \ + (__info->ver.str[0] == __manufacturer[0] && \ + __info->ver.str[1] == __manufacturer[1]) +/* + * I2C operation of the M-5MOLS + * + * The I2C read operation of the M-5MOLS requires 2 messages. The first + * message sends the information about the command, command category, and total + * message size. The second message is used to retrieve the data specifed in + * the first message + * + * 1st message 2nd message + * +-------+---+----------+-----+-------+ +------+------+------+------+ + * | size1 | R | category | cmd | size2 | | d[0] | d[1] | d[2] | d[3] | + * +-------+---+----------+-----+-------+ +------+------+------+------+ + * - size1: message data size(5 in this case) + * - size2: desired buffer size of the 2nd message + * - d[0..3]: according to size2 + * + * The I2C write operation needs just one message. The message includes + * category, command, total size, and desired data. + * + * 1st message + * +-------+---+----------+-----+------+------+------+------+ + * | size1 | W | category | cmd | d[0] | d[1] | d[2] | d[3] | + * +-------+---+----------+-----+------+------+------+------+ + * - d[0..3]: according to size1 + */ +int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val); +int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val); +int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); +int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val); + +int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask, + int timeout); + +/* Mask value for busy waiting until M-5MOLS I2C interface is initialized */ +#define M5MOLS_I2C_RDY_WAIT_FL (1 << 16) +/* ISP state transition timeout, in ms */ +#define M5MOLS_MODE_CHANGE_TIMEOUT 200 +#define M5MOLS_BUSY_WAIT_DEF_TIMEOUT 250 + +/* + * Mode operation of the M-5MOLS + * + * Changing the mode of the M-5MOLS is needed right executing order. + * There are three modes(PARAMETER, MONITOR, CAPTURE) which can be changed + * by user. There are various categories associated with each mode. + * + * +============================================================+ + * | mode | category | + * +============================================================+ + * | FLASH | FLASH(only after Stand-by or Power-on) | + * | SYSTEM | SYSTEM(only after sensor arm-booting) | + * | PARAMETER | PARAMETER | + * | MONITOR | MONITOR(preview), Auto Focus, Face Detection | + * | CAPTURE | Single CAPTURE, Preview(recording) | + * +============================================================+ + * + * The available executing order between each modes are as follows: + * PARAMETER <---> MONITOR <---> CAPTURE + */ +int m5mols_set_mode(struct m5mols_info *info, u8 mode); + +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg); +int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 condition, u32 timeout); +int m5mols_restore_controls(struct m5mols_info *info); +int m5mols_start_capture(struct m5mols_info *info); +int m5mols_do_scenemode(struct m5mols_info *info, u8 mode); +int m5mols_lock_3a(struct m5mols_info *info, bool lock); +int m5mols_set_ctrl(struct v4l2_ctrl *ctrl); +int m5mols_init_controls(struct v4l2_subdev *sd); + +/* The firmware function */ +int m5mols_update_fw(struct v4l2_subdev *sd, + int (*set_power)(struct m5mols_info *, bool)); + +static inline struct m5mols_info *to_m5mols(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct m5mols_info, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + struct m5mols_info *info = container_of(ctrl->handler, + struct m5mols_info, handle); + return &info->sd; +} + +static inline void m5mols_set_ctrl_mode(struct v4l2_ctrl *ctrl, + unsigned int mode) +{ + ctrl->priv = (void *)(uintptr_t)mode; +} + +static inline unsigned int m5mols_get_ctrl_mode(struct v4l2_ctrl *ctrl) +{ + return (unsigned int)(uintptr_t)ctrl->priv; +} + +#endif /* M5MOLS_H */ |