diff options
Diffstat (limited to 'drivers/media/i2c/soc_camera/mt9m001.c')
-rw-r--r-- | drivers/media/i2c/soc_camera/mt9m001.c | 757 |
1 files changed, 757 insertions, 0 deletions
diff --git a/drivers/media/i2c/soc_camera/mt9m001.c b/drivers/media/i2c/soc_camera/mt9m001.c new file mode 100644 index 00000000000..19f8a07764f --- /dev/null +++ b/drivers/media/i2c/soc_camera/mt9m001.c @@ -0,0 +1,757 @@ +/* + * Driver for MT9M001 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/log2.h> +#include <linux/module.h> + +#include <media/soc_camera.h> +#include <media/soc_mediabus.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> + +/* + * mt9m001 i2c address 0x5d + * The platform has to define struct i2c_board_info objects and link to them + * from struct soc_camera_link + */ + +/* mt9m001 selected register addresses */ +#define MT9M001_CHIP_VERSION 0x00 +#define MT9M001_ROW_START 0x01 +#define MT9M001_COLUMN_START 0x02 +#define MT9M001_WINDOW_HEIGHT 0x03 +#define MT9M001_WINDOW_WIDTH 0x04 +#define MT9M001_HORIZONTAL_BLANKING 0x05 +#define MT9M001_VERTICAL_BLANKING 0x06 +#define MT9M001_OUTPUT_CONTROL 0x07 +#define MT9M001_SHUTTER_WIDTH 0x09 +#define MT9M001_FRAME_RESTART 0x0b +#define MT9M001_SHUTTER_DELAY 0x0c +#define MT9M001_RESET 0x0d +#define MT9M001_READ_OPTIONS1 0x1e +#define MT9M001_READ_OPTIONS2 0x20 +#define MT9M001_GLOBAL_GAIN 0x35 +#define MT9M001_CHIP_ENABLE 0xF1 + +#define MT9M001_MAX_WIDTH 1280 +#define MT9M001_MAX_HEIGHT 1024 +#define MT9M001_MIN_WIDTH 48 +#define MT9M001_MIN_HEIGHT 32 +#define MT9M001_COLUMN_SKIP 20 +#define MT9M001_ROW_SKIP 12 + +/* MT9M001 has only one fixed colorspace per pixelcode */ +struct mt9m001_datafmt { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + +/* Find a data format by a pixel code in an array */ +static const struct mt9m001_datafmt *mt9m001_find_datafmt( + enum v4l2_mbus_pixelcode code, const struct mt9m001_datafmt *fmt, + int n) +{ + int i; + for (i = 0; i < n; i++) + if (fmt[i].code == code) + return fmt + i; + + return NULL; +} + +static const struct mt9m001_datafmt mt9m001_colour_fmts[] = { + /* + * Order important: first natively supported, + * second supported with a GPIO extender + */ + {V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, +}; + +static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = { + /* Order important - see above */ + {V4L2_MBUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, +}; + +struct mt9m001 { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct { + /* exposure/auto-exposure cluster */ + struct v4l2_ctrl *autoexposure; + struct v4l2_ctrl *exposure; + }; + struct v4l2_rect rect; /* Sensor window */ + const struct mt9m001_datafmt *fmt; + const struct mt9m001_datafmt *fmts; + int num_fmts; + int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */ + unsigned int total_h; + unsigned short y_skip_top; /* Lines to skip at the top */ +}; + +static struct mt9m001 *to_mt9m001(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct mt9m001, subdev); +} + +static int reg_read(struct i2c_client *client, const u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int reg_write(struct i2c_client *client, const u8 reg, + const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int reg_set(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret | data); +} + +static int reg_clear(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret & ~data); +} + +static int mt9m001_init(struct i2c_client *client) +{ + int ret; + + dev_dbg(&client->dev, "%s\n", __func__); + + /* + * We don't know, whether platform provides reset, issue a soft reset + * too. This returns all registers to their default values. + */ + ret = reg_write(client, MT9M001_RESET, 1); + if (!ret) + ret = reg_write(client, MT9M001_RESET, 0); + + /* Disable chip, synchronous option update */ + if (!ret) + ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 0); + + return ret; +} + +static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* Switch to master "normal" mode or stop sensor readout */ + if (reg_write(client, MT9M001_OUTPUT_CONTROL, enable ? 2 : 0) < 0) + return -EIO; + return 0; +} + +static int mt9m001_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_rect rect = a->c; + int ret; + const u16 hblank = 9, vblank = 25; + + if (mt9m001->fmts == mt9m001_colour_fmts) + /* + * Bayer format - even number of rows for simplicity, + * but let the user play with the top row. + */ + rect.height = ALIGN(rect.height, 2); + + /* Datasheet requirement: see register description */ + rect.width = ALIGN(rect.width, 2); + rect.left = ALIGN(rect.left, 2); + + soc_camera_limit_side(&rect.left, &rect.width, + MT9M001_COLUMN_SKIP, MT9M001_MIN_WIDTH, MT9M001_MAX_WIDTH); + + soc_camera_limit_side(&rect.top, &rect.height, + MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT); + + mt9m001->total_h = rect.height + mt9m001->y_skip_top + vblank; + + /* Blanking and start values - default... */ + ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank); + if (!ret) + ret = reg_write(client, MT9M001_VERTICAL_BLANKING, vblank); + + /* + * The caller provides a supported format, as verified per + * call to .try_mbus_fmt() + */ + if (!ret) + ret = reg_write(client, MT9M001_COLUMN_START, rect.left); + if (!ret) + ret = reg_write(client, MT9M001_ROW_START, rect.top); + if (!ret) + ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect.width - 1); + if (!ret) + ret = reg_write(client, MT9M001_WINDOW_HEIGHT, + rect.height + mt9m001->y_skip_top - 1); + if (!ret && v4l2_ctrl_g_ctrl(mt9m001->autoexposure) == V4L2_EXPOSURE_AUTO) + ret = reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h); + + if (!ret) + mt9m001->rect = rect; + + return ret; +} + +static int mt9m001_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + a->c = mt9m001->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9m001_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = MT9M001_COLUMN_SKIP; + a->bounds.top = MT9M001_ROW_SKIP; + a->bounds.width = MT9M001_MAX_WIDTH; + a->bounds.height = MT9M001_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9m001_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + mf->width = mt9m001->rect.width; + mf->height = mt9m001->rect.height; + mf->code = mt9m001->fmt->code; + mf->colorspace = mt9m001->fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int mt9m001_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_crop a = { + .c = { + .left = mt9m001->rect.left, + .top = mt9m001->rect.top, + .width = mf->width, + .height = mf->height, + }, + }; + int ret; + + /* No support for scaling so far, just crop. TODO: use skipping */ + ret = mt9m001_s_crop(sd, &a); + if (!ret) { + mf->width = mt9m001->rect.width; + mf->height = mt9m001->rect.height; + mt9m001->fmt = mt9m001_find_datafmt(mf->code, + mt9m001->fmts, mt9m001->num_fmts); + mf->colorspace = mt9m001->fmt->colorspace; + } + + return ret; +} + +static int mt9m001_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + const struct mt9m001_datafmt *fmt; + + v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH, + MT9M001_MAX_WIDTH, 1, + &mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top, + MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0); + + if (mt9m001->fmts == mt9m001_colour_fmts) + mf->height = ALIGN(mf->height - 1, 2); + + fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts, + mt9m001->num_fmts); + if (!fmt) { + fmt = mt9m001->fmt; + mf->code = fmt->code; + } + + mf->colorspace = fmt->colorspace; + + return 0; +} + +static int mt9m001_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = mt9m001->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m001_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + reg->size = 2; + reg->val = reg_read(client, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9m001_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + if (reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int mt9m001_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + return soc_camera_set_power(&client->dev, icl, on); +} + +static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m001 *mt9m001 = container_of(ctrl->handler, + struct mt9m001, hdl); + s32 min, max; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE_AUTO: + min = mt9m001->exposure->minimum; + max = mt9m001->exposure->maximum; + mt9m001->exposure->val = + (524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min; + break; + } + return 0; +} + +static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m001 *mt9m001 = container_of(ctrl->handler, + struct mt9m001, hdl); + struct v4l2_subdev *sd = &mt9m001->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct v4l2_ctrl *exp = mt9m001->exposure; + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->val) + data = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000); + else + data = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000); + if (data < 0) + return -EIO; + return 0; + + case V4L2_CID_GAIN: + /* See Datasheet Table 7, Gain settings. */ + if (ctrl->val <= ctrl->default_value) { + /* Pack it into 0..1 step 0.125, register values 0..8 */ + unsigned long range = ctrl->default_value - ctrl->minimum; + data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range; + + dev_dbg(&client->dev, "Setting gain %d\n", data); + data = reg_write(client, MT9M001_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } else { + /* Pack it into 1.125..15 variable step, register values 9..67 */ + /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ + unsigned long range = ctrl->maximum - ctrl->default_value - 1; + unsigned long gain = ((ctrl->val - ctrl->default_value - 1) * + 111 + range / 2) / range + 9; + + if (gain <= 32) + data = gain; + else if (gain <= 64) + data = ((gain - 32) * 16 + 16) / 32 + 80; + else + data = ((gain - 64) * 7 + 28) / 56 + 96; + + dev_dbg(&client->dev, "Setting gain from %d to %d\n", + reg_read(client, MT9M001_GLOBAL_GAIN), data); + data = reg_write(client, MT9M001_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } + return 0; + + case V4L2_CID_EXPOSURE_AUTO: + if (ctrl->val == V4L2_EXPOSURE_MANUAL) { + unsigned long range = exp->maximum - exp->minimum; + unsigned long shutter = ((exp->val - exp->minimum) * 1048 + + range / 2) / range + 1; + + dev_dbg(&client->dev, + "Setting shutter width from %d to %lu\n", + reg_read(client, MT9M001_SHUTTER_WIDTH), shutter); + if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0) + return -EIO; + } else { + const u16 vblank = 25; + + mt9m001->total_h = mt9m001->rect.height + + mt9m001->y_skip_top + vblank; + if (reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h) < 0) + return -EIO; + } + return 0; + } + return -EINVAL; +} + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9m001_video_probe(struct soc_camera_link *icl, + struct i2c_client *client) +{ + struct mt9m001 *mt9m001 = to_mt9m001(client); + s32 data; + unsigned long flags; + int ret; + + ret = mt9m001_s_power(&mt9m001->subdev, 1); + if (ret < 0) + return ret; + + /* Enable the chip */ + data = reg_write(client, MT9M001_CHIP_ENABLE, 1); + dev_dbg(&client->dev, "write: %d\n", data); + + /* Read out the chip version register */ + data = reg_read(client, MT9M001_CHIP_VERSION); + + /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ + switch (data) { + case 0x8411: + case 0x8421: + mt9m001->model = V4L2_IDENT_MT9M001C12ST; + mt9m001->fmts = mt9m001_colour_fmts; + break; + case 0x8431: + mt9m001->model = V4L2_IDENT_MT9M001C12STM; + mt9m001->fmts = mt9m001_monochrome_fmts; + break; + default: + dev_err(&client->dev, + "No MT9M001 chip detected, register read %x\n", data); + ret = -ENODEV; + goto done; + } + + mt9m001->num_fmts = 0; + + /* + * This is a 10bit sensor, so by default we only allow 10bit. + * The platform may support different bus widths due to + * different routing of the data lines. + */ + if (icl->query_bus_param) + flags = icl->query_bus_param(icl); + else + flags = SOCAM_DATAWIDTH_10; + + if (flags & SOCAM_DATAWIDTH_10) + mt9m001->num_fmts++; + else + mt9m001->fmts++; + + if (flags & SOCAM_DATAWIDTH_8) + mt9m001->num_fmts++; + + mt9m001->fmt = &mt9m001->fmts[0]; + + dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, + data == 0x8431 ? "C12STM" : "C12ST"); + + ret = mt9m001_init(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to initialise the camera\n"); + goto done; + } + + /* mt9m001_init() has reset the chip, returning registers to defaults */ + ret = v4l2_ctrl_handler_setup(&mt9m001->hdl); + +done: + mt9m001_s_power(&mt9m001->subdev, 0); + return ret; +} + +static void mt9m001_video_remove(struct soc_camera_link *icl) +{ + if (icl->free_bus) + icl->free_bus(icl); +} + +static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + *lines = mt9m001->y_skip_top; + + return 0; +} + +static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = { + .g_volatile_ctrl = mt9m001_g_volatile_ctrl, + .s_ctrl = mt9m001_s_ctrl, +}; + +static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { + .g_chip_ident = mt9m001_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9m001_g_register, + .s_register = mt9m001_s_register, +#endif + .s_power = mt9m001_s_power, +}; + +static int mt9m001_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + if (index >= mt9m001->num_fmts) + return -EINVAL; + + *code = mt9m001->fmts[index].code; + return 0; +} + +static int mt9m001_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + /* MT9M001 has all capture_format parameters fixed */ + cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH | + V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(icl, cfg); + + return 0; +} + +static int mt9m001_s_mbus_config(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg) +{ + const struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + struct mt9m001 *mt9m001 = to_mt9m001(client); + unsigned int bps = soc_mbus_get_fmtdesc(mt9m001->fmt->code)->bits_per_sample; + + if (icl->set_bus_param) + return icl->set_bus_param(icl, 1 << (bps - 1)); + + /* + * Without board specific bus width settings we only support the + * sensors native bus width + */ + return bps == 10 ? 0 : -EINVAL; +} + +static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { + .s_stream = mt9m001_s_stream, + .s_mbus_fmt = mt9m001_s_fmt, + .g_mbus_fmt = mt9m001_g_fmt, + .try_mbus_fmt = mt9m001_try_fmt, + .s_crop = mt9m001_s_crop, + .g_crop = mt9m001_g_crop, + .cropcap = mt9m001_cropcap, + .enum_mbus_fmt = mt9m001_enum_fmt, + .g_mbus_config = mt9m001_g_mbus_config, + .s_mbus_config = mt9m001_s_mbus_config, +}; + +static struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { + .g_skip_top_lines = mt9m001_g_skip_top_lines, +}; + +static struct v4l2_subdev_ops mt9m001_subdev_ops = { + .core = &mt9m001_subdev_core_ops, + .video = &mt9m001_subdev_video_ops, + .sensor = &mt9m001_subdev_sensor_ops, +}; + +static int mt9m001_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9m001 *mt9m001; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + int ret; + + if (!icl) { + dev_err(&client->dev, "MT9M001 driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9m001 = kzalloc(sizeof(struct mt9m001), GFP_KERNEL); + if (!mt9m001) + return -ENOMEM; + + v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops); + v4l2_ctrl_handler_init(&mt9m001->hdl, 4); + v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, + V4L2_CID_EXPOSURE, 1, 255, 1, 255); + /* + * Simulated autoexposure. If enabled, we calculate shutter width + * ourselves in the driver based on vertical blanking and frame width + */ + mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl, + &mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, + V4L2_EXPOSURE_AUTO); + mt9m001->subdev.ctrl_handler = &mt9m001->hdl; + if (mt9m001->hdl.error) { + int err = mt9m001->hdl.error; + + kfree(mt9m001); + return err; + } + v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure, + V4L2_EXPOSURE_MANUAL, true); + + /* Second stage probe - when a capture adapter is there */ + mt9m001->y_skip_top = 0; + mt9m001->rect.left = MT9M001_COLUMN_SKIP; + mt9m001->rect.top = MT9M001_ROW_SKIP; + mt9m001->rect.width = MT9M001_MAX_WIDTH; + mt9m001->rect.height = MT9M001_MAX_HEIGHT; + + ret = mt9m001_video_probe(icl, client); + if (ret) { + v4l2_ctrl_handler_free(&mt9m001->hdl); + kfree(mt9m001); + } + + return ret; +} + +static int mt9m001_remove(struct i2c_client *client) +{ + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + v4l2_device_unregister_subdev(&mt9m001->subdev); + v4l2_ctrl_handler_free(&mt9m001->hdl); + mt9m001_video_remove(icl); + kfree(mt9m001); + + return 0; +} + +static const struct i2c_device_id mt9m001_id[] = { + { "mt9m001", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9m001_id); + +static struct i2c_driver mt9m001_i2c_driver = { + .driver = { + .name = "mt9m001", + }, + .probe = mt9m001_probe, + .remove = mt9m001_remove, + .id_table = mt9m001_id, +}; + +module_i2c_driver(mt9m001_i2c_driver); + +MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); +MODULE_LICENSE("GPL"); |