diff options
Diffstat (limited to 'drivers/media/parport/w9966.c')
| -rw-r--r-- | drivers/media/parport/w9966.c | 981 |
1 files changed, 981 insertions, 0 deletions
diff --git a/drivers/media/parport/w9966.c b/drivers/media/parport/w9966.c new file mode 100644 index 00000000000..db2a6003a1c --- /dev/null +++ b/drivers/media/parport/w9966.c @@ -0,0 +1,981 @@ +/* + Winbond w9966cf Webcam parport driver. + + Version 0.33 + + Copyright (C) 2001 Jakob Kemi <jakob.kemi@post.utfors.se> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ +/* + Supported devices: + *Lifeview FlyCam Supra (using the Philips saa7111a chip) + + Does any other model using the w9966 interface chip exist ? + + Todo: + + *Add a working EPP mode, since DMA ECP read isn't implemented + in the parport drivers. (That's why it's so sloow) + + *Add support for other ccd-control chips than the saa7111 + please send me feedback on what kind of chips you have. + + *Add proper probing. I don't know what's wrong with the IEEE1284 + parport drivers but (IEEE1284_MODE_NIBBLE|IEEE1284_DEVICE_ID) + and nibble read seems to be broken for some peripherals. + + *Add probing for onboard SRAM, port directions etc. (if possible) + + *Add support for the hardware compressed modes (maybe using v4l2) + + *Fix better support for the capture window (no skewed images, v4l + interface to capt. window) + + *Probably some bugs that I don't know of + + Please support me by sending feedback! + + Changes: + + Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE + and owner support for newer module locks +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> +#include <linux/parport.h> + +/*#define DEBUG*/ /* Undef me for production */ + +#ifdef DEBUG +#define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __func__ , ##a) +#else +#define DPRINTF(x...) +#endif + +/* + * Defines, simple typedefs etc. + */ + +#define W9966_DRIVERNAME "W9966CF Webcam" +#define W9966_MAXCAMS 4 /* Maximum number of cameras */ +#define W9966_RBUFFER 2048 /* Read buffer (must be an even number) */ +#define W9966_SRAMSIZE 131072 /* 128kb */ +#define W9966_SRAMID 0x02 /* check w9966cf.pdf */ + +/* Empirically determined window limits */ +#define W9966_WND_MIN_X 16 +#define W9966_WND_MIN_Y 14 +#define W9966_WND_MAX_X 705 +#define W9966_WND_MAX_Y 253 +#define W9966_WND_MAX_W (W9966_WND_MAX_X - W9966_WND_MIN_X) +#define W9966_WND_MAX_H (W9966_WND_MAX_Y - W9966_WND_MIN_Y) + +/* Keep track of our current state */ +#define W9966_STATE_PDEV 0x01 +#define W9966_STATE_CLAIMED 0x02 +#define W9966_STATE_VDEV 0x04 + +#define W9966_I2C_W_ID 0x48 +#define W9966_I2C_R_ID 0x49 +#define W9966_I2C_R_DATA 0x08 +#define W9966_I2C_R_CLOCK 0x04 +#define W9966_I2C_W_DATA 0x02 +#define W9966_I2C_W_CLOCK 0x01 + +struct w9966 { + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler hdl; + unsigned char dev_state; + unsigned char i2c_state; + unsigned short ppmode; + struct parport *pport; + struct pardevice *pdev; + struct video_device vdev; + unsigned short width; + unsigned short height; + unsigned char brightness; + signed char contrast; + signed char color; + signed char hue; + struct mutex lock; +}; + +/* + * Module specific properties + */ + +MODULE_AUTHOR("Jakob Kemi <jakob.kemi@post.utfors.se>"); +MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.33.1"); + +#ifdef MODULE +static char *pardev[] = {[0 ... W9966_MAXCAMS] = ""}; +#else +static char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"}; +#endif +module_param_array(pardev, charp, NULL, 0); +MODULE_PARM_DESC(pardev, "pardev: where to search for\n" + "\teach camera. 'aggressive' means brute-force search.\n" + "\tEg: >pardev=parport3,aggressive,parport2,parport1< would assign\n" + "\tcam 1 to parport3 and search every parport for cam 2 etc..."); + +static int parmode; +module_param(parmode, int, 0); +MODULE_PARM_DESC(parmode, "parmode: transfer mode (0=auto, 1=ecp, 2=epp"); + +static int video_nr = -1; +module_param(video_nr, int, 0); + +static struct w9966 w9966_cams[W9966_MAXCAMS]; + +/* + * Private function defines + */ + + +/* Set camera phase flags, so we know what to uninit when terminating */ +static inline void w9966_set_state(struct w9966 *cam, int mask, int val) +{ + cam->dev_state = (cam->dev_state & ~mask) ^ val; +} + +/* Get camera phase flags */ +static inline int w9966_get_state(struct w9966 *cam, int mask, int val) +{ + return ((cam->dev_state & mask) == val); +} + +/* Claim parport for ourself */ +static void w9966_pdev_claim(struct w9966 *cam) +{ + if (w9966_get_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED)) + return; + parport_claim_or_block(cam->pdev); + w9966_set_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED); +} + +/* Release parport for others to use */ +static void w9966_pdev_release(struct w9966 *cam) +{ + if (w9966_get_state(cam, W9966_STATE_CLAIMED, 0)) + return; + parport_release(cam->pdev); + w9966_set_state(cam, W9966_STATE_CLAIMED, 0); +} + +/* Read register from W9966 interface-chip + Expects a claimed pdev + -1 on error, else register data (byte) */ +static int w9966_read_reg(struct w9966 *cam, int reg) +{ + /* ECP, read, regtransfer, REG, REG, REG, REG, REG */ + const unsigned char addr = 0x80 | (reg & 0x1f); + unsigned char val; + + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) + return -1; + if (parport_write(cam->pport, &addr, 1) != 1) + return -1; + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0) + return -1; + if (parport_read(cam->pport, &val, 1) != 1) + return -1; + + return val; +} + +/* Write register to W9966 interface-chip + Expects a claimed pdev + -1 on error */ +static int w9966_write_reg(struct w9966 *cam, int reg, int data) +{ + /* ECP, write, regtransfer, REG, REG, REG, REG, REG */ + const unsigned char addr = 0xc0 | (reg & 0x1f); + const unsigned char val = data; + + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) + return -1; + if (parport_write(cam->pport, &addr, 1) != 1) + return -1; + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0) + return -1; + if (parport_write(cam->pport, &val, 1) != 1) + return -1; + + return 0; +} + +/* + * Ugly and primitive i2c protocol functions + */ + +/* Sets the data line on the i2c bus. + Expects a claimed pdev. */ +static void w9966_i2c_setsda(struct w9966 *cam, int state) +{ + if (state) + cam->i2c_state |= W9966_I2C_W_DATA; + else + cam->i2c_state &= ~W9966_I2C_W_DATA; + + w9966_write_reg(cam, 0x18, cam->i2c_state); + udelay(5); +} + +/* Get peripheral clock line + Expects a claimed pdev. */ +static int w9966_i2c_getscl(struct w9966 *cam) +{ + const unsigned char state = w9966_read_reg(cam, 0x18); + return ((state & W9966_I2C_R_CLOCK) > 0); +} + +/* Sets the clock line on the i2c bus. + Expects a claimed pdev. -1 on error */ +static int w9966_i2c_setscl(struct w9966 *cam, int state) +{ + unsigned long timeout; + + if (state) + cam->i2c_state |= W9966_I2C_W_CLOCK; + else + cam->i2c_state &= ~W9966_I2C_W_CLOCK; + + w9966_write_reg(cam, 0x18, cam->i2c_state); + udelay(5); + + /* we go to high, we also expect the peripheral to ack. */ + if (state) { + timeout = jiffies + 100; + while (!w9966_i2c_getscl(cam)) { + if (time_after(jiffies, timeout)) + return -1; + } + } + return 0; +} + +#if 0 +/* Get peripheral data line + Expects a claimed pdev. */ +static int w9966_i2c_getsda(struct w9966 *cam) +{ + const unsigned char state = w9966_read_reg(cam, 0x18); + return ((state & W9966_I2C_R_DATA) > 0); +} +#endif + +/* Write a byte with ack to the i2c bus. + Expects a claimed pdev. -1 on error */ +static int w9966_i2c_wbyte(struct w9966 *cam, int data) +{ + int i; + + for (i = 7; i >= 0; i--) { + w9966_i2c_setsda(cam, (data >> i) & 0x01); + + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + w9966_i2c_setscl(cam, 0); + } + + w9966_i2c_setsda(cam, 1); + + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + w9966_i2c_setscl(cam, 0); + + return 0; +} + +/* Read a data byte with ack from the i2c-bus + Expects a claimed pdev. -1 on error */ +#if 0 +static int w9966_i2c_rbyte(struct w9966 *cam) +{ + unsigned char data = 0x00; + int i; + + w9966_i2c_setsda(cam, 1); + + for (i = 0; i < 8; i++) { + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + data = data << 1; + if (w9966_i2c_getsda(cam)) + data |= 0x01; + + w9966_i2c_setscl(cam, 0); + } + return data; +} +#endif + +/* Read a register from the i2c device. + Expects claimed pdev. -1 on error */ +#if 0 +static int w9966_read_reg_i2c(struct w9966 *cam, int reg) +{ + int data; + + w9966_i2c_setsda(cam, 0); + w9966_i2c_setscl(cam, 0); + + if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 || + w9966_i2c_wbyte(cam, reg) == -1) + return -1; + + w9966_i2c_setsda(cam, 1); + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + w9966_i2c_setsda(cam, 0); + w9966_i2c_setscl(cam, 0); + + if (w9966_i2c_wbyte(cam, W9966_I2C_R_ID) == -1) + return -1; + data = w9966_i2c_rbyte(cam); + if (data == -1) + return -1; + + w9966_i2c_setsda(cam, 0); + + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + w9966_i2c_setsda(cam, 1); + + return data; +} +#endif + +/* Write a register to the i2c device. + Expects claimed pdev. -1 on error */ +static int w9966_write_reg_i2c(struct w9966 *cam, int reg, int data) +{ + w9966_i2c_setsda(cam, 0); + w9966_i2c_setscl(cam, 0); + + if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 || + w9966_i2c_wbyte(cam, reg) == -1 || + w9966_i2c_wbyte(cam, data) == -1) + return -1; + + w9966_i2c_setsda(cam, 0); + if (w9966_i2c_setscl(cam, 1) == -1) + return -1; + + w9966_i2c_setsda(cam, 1); + + return 0; +} + +/* Find a good length for capture window (used both for W and H) + A bit ugly but pretty functional. The capture length + have to match the downscale */ +static int w9966_findlen(int near, int size, int maxlen) +{ + int bestlen = size; + int besterr = abs(near - bestlen); + int len; + + for (len = size + 1; len < maxlen; len++) { + int err; + if (((64 * size) % len) != 0) + continue; + + err = abs(near - len); + + /* Only continue as long as we keep getting better values */ + if (err > besterr) + break; + + besterr = err; + bestlen = len; + } + + return bestlen; +} + +/* Modify capture window (if necessary) + and calculate downscaling + Return -1 on error */ +static int w9966_calcscale(int size, int min, int max, int *beg, int *end, unsigned char *factor) +{ + int maxlen = max - min; + int len = *end - *beg + 1; + int newlen = w9966_findlen(len, size, maxlen); + int err = newlen - len; + + /* Check for bad format */ + if (newlen > maxlen || newlen < size) + return -1; + + /* Set factor (6 bit fixed) */ + *factor = (64 * size) / newlen; + if (*factor == 64) + *factor = 0x00; /* downscale is disabled */ + else + *factor |= 0x80; /* set downscale-enable bit */ + + /* Modify old beginning and end */ + *beg -= err / 2; + *end += err - (err / 2); + + /* Move window if outside borders */ + if (*beg < min) { + *end += min - *beg; + *beg += min - *beg; + } + if (*end > max) { + *beg -= *end - max; + *end -= *end - max; + } + + return 0; +} + +/* Setup the cameras capture window etc. + Expects a claimed pdev + return -1 on error */ +static int w9966_setup(struct w9966 *cam, int x1, int y1, int x2, int y2, int w, int h) +{ + unsigned int i; + unsigned int enh_s, enh_e; + unsigned char scale_x, scale_y; + unsigned char regs[0x1c]; + unsigned char saa7111_regs[] = { + 0x21, 0x00, 0xd8, 0x23, 0x00, 0x80, 0x80, 0x00, + 0x88, 0x10, 0x80, 0x40, 0x40, 0x00, 0x01, 0x00, + 0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0 + }; + + + if (w * h * 2 > W9966_SRAMSIZE) { + DPRINTF("capture window exceeds SRAM size!.\n"); + w = 200; h = 160; /* Pick default values */ + } + + w &= ~0x1; + if (w < 2) + w = 2; + if (h < 1) + h = 1; + if (w > W9966_WND_MAX_W) + w = W9966_WND_MAX_W; + if (h > W9966_WND_MAX_H) + h = W9966_WND_MAX_H; + + cam->width = w; + cam->height = h; + + enh_s = 0; + enh_e = w * h * 2; + + /* Modify capture window if necessary and calculate downscaling */ + if (w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 || + w9966_calcscale(h, W9966_WND_MIN_Y, W9966_WND_MAX_Y, &y1, &y2, &scale_y) != 0) + return -1; + + DPRINTF("%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n", + w, h, x1, x2, y1, y2, scale_x & ~0x80, scale_y & ~0x80); + + /* Setup registers */ + regs[0x00] = 0x00; /* Set normal operation */ + regs[0x01] = 0x18; /* Capture mode */ + regs[0x02] = scale_y; /* V-scaling */ + regs[0x03] = scale_x; /* H-scaling */ + + /* Capture window */ + regs[0x04] = (x1 & 0x0ff); /* X-start (8 low bits) */ + regs[0x05] = (x1 & 0x300)>>8; /* X-start (2 high bits) */ + regs[0x06] = (y1 & 0x0ff); /* Y-start (8 low bits) */ + regs[0x07] = (y1 & 0x300)>>8; /* Y-start (2 high bits) */ + regs[0x08] = (x2 & 0x0ff); /* X-end (8 low bits) */ + regs[0x09] = (x2 & 0x300)>>8; /* X-end (2 high bits) */ + regs[0x0a] = (y2 & 0x0ff); /* Y-end (8 low bits) */ + + regs[0x0c] = W9966_SRAMID; /* SRAM-banks (1x 128kb) */ + + /* Enhancement layer */ + regs[0x0d] = (enh_s & 0x000ff); /* Enh. start (0-7) */ + regs[0x0e] = (enh_s & 0x0ff00) >> 8; /* Enh. start (8-15) */ + regs[0x0f] = (enh_s & 0x70000) >> 16; /* Enh. start (16-17/18??) */ + regs[0x10] = (enh_e & 0x000ff); /* Enh. end (0-7) */ + regs[0x11] = (enh_e & 0x0ff00) >> 8; /* Enh. end (8-15) */ + regs[0x12] = (enh_e & 0x70000) >> 16; /* Enh. end (16-17/18??) */ + + /* Misc */ + regs[0x13] = 0x40; /* VEE control (raw 4:2:2) */ + regs[0x17] = 0x00; /* ??? */ + regs[0x18] = cam->i2c_state = 0x00; /* Serial bus */ + regs[0x19] = 0xff; /* I/O port direction control */ + regs[0x1a] = 0xff; /* I/O port data register */ + regs[0x1b] = 0x10; /* ??? */ + + /* SAA7111 chip settings */ + saa7111_regs[0x0a] = cam->brightness; + saa7111_regs[0x0b] = cam->contrast; + saa7111_regs[0x0c] = cam->color; + saa7111_regs[0x0d] = cam->hue; + + /* Reset (ECP-fifo & serial-bus) */ + if (w9966_write_reg(cam, 0x00, 0x03) == -1) + return -1; + + /* Write regs to w9966cf chip */ + for (i = 0; i < 0x1c; i++) + if (w9966_write_reg(cam, i, regs[i]) == -1) + return -1; + + /* Write regs to saa7111 chip */ + for (i = 0; i < 0x20; i++) + if (w9966_write_reg_i2c(cam, i, saa7111_regs[i]) == -1) + return -1; + + return 0; +} + +/* + * Video4linux interfacing + */ + +static int cam_querycap(struct file *file, void *priv, + struct v4l2_capability *vcap) +{ + struct w9966 *cam = video_drvdata(file); + + strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver)); + strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card)); + strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); + vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; + vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int cam_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + if (vin->index > 0) + return -EINVAL; + strlcpy(vin->name, "Camera", sizeof(vin->name)); + vin->type = V4L2_INPUT_TYPE_CAMERA; + vin->audioset = 0; + vin->tuner = 0; + vin->std = 0; + vin->status = 0; + return 0; +} + +static int cam_g_input(struct file *file, void *fh, unsigned int *inp) +{ + *inp = 0; + return 0; +} + +static int cam_s_input(struct file *file, void *fh, unsigned int inp) +{ + return (inp > 0) ? -EINVAL : 0; +} + +static int cam_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct w9966 *cam = + container_of(ctrl->handler, struct w9966, hdl); + int ret = 0; + + mutex_lock(&cam->lock); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + cam->brightness = ctrl->val; + break; + case V4L2_CID_CONTRAST: + cam->contrast = ctrl->val; + break; + case V4L2_CID_SATURATION: + cam->color = ctrl->val; + break; + case V4L2_CID_HUE: + cam->hue = ctrl->val; + break; + default: + ret = -EINVAL; + break; + } + + if (ret == 0) { + w9966_pdev_claim(cam); + + if (w9966_write_reg_i2c(cam, 0x0a, cam->brightness) == -1 || + w9966_write_reg_i2c(cam, 0x0b, cam->contrast) == -1 || + w9966_write_reg_i2c(cam, 0x0c, cam->color) == -1 || + w9966_write_reg_i2c(cam, 0x0d, cam->hue) == -1) { + ret = -EIO; + } + + w9966_pdev_release(cam); + } + mutex_unlock(&cam->lock); + return ret; +} + +static int cam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct w9966 *cam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + pix->width = cam->width; + pix->height = cam->height; + pix->pixelformat = V4L2_PIX_FMT_YUYV; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = 2 * cam->width; + pix->sizeimage = 2 * cam->width * cam->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int cam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->width < 2) + pix->width = 2; + if (pix->height < 1) + pix->height = 1; + if (pix->width > W9966_WND_MAX_W) + pix->width = W9966_WND_MAX_W; + if (pix->height > W9966_WND_MAX_H) + pix->height = W9966_WND_MAX_H; + pix->pixelformat = V4L2_PIX_FMT_YUYV; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = 2 * pix->width; + pix->sizeimage = 2 * pix->width * pix->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int cam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct w9966 *cam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + int ret = cam_try_fmt_vid_cap(file, fh, fmt); + + if (ret) + return ret; + + mutex_lock(&cam->lock); + /* Update camera regs */ + w9966_pdev_claim(cam); + ret = w9966_setup(cam, 0, 0, 1023, 1023, pix->width, pix->height); + w9966_pdev_release(cam); + mutex_unlock(&cam->lock); + return ret; +} + +static int cam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) +{ + static struct v4l2_fmtdesc formats[] = { + { 0, 0, 0, + "YUV 4:2:2", V4L2_PIX_FMT_YUYV, + { 0, 0, 0, 0 } + }, + }; + enum v4l2_buf_type type = fmt->type; + + if (fmt->index > 0) + return -EINVAL; + + *fmt = formats[fmt->index]; + fmt->type = type; + return 0; +} + +/* Capture data */ +static ssize_t w9966_v4l_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct w9966 *cam = video_drvdata(file); + unsigned char addr = 0xa0; /* ECP, read, CCD-transfer, 00000 */ + unsigned char __user *dest = (unsigned char __user *)buf; + unsigned long dleft = count; + unsigned char *tbuf; + + /* Why would anyone want more than this?? */ + if (count > cam->width * cam->height * 2) + return -EINVAL; + + mutex_lock(&cam->lock); + w9966_pdev_claim(cam); + w9966_write_reg(cam, 0x00, 0x02); /* Reset ECP-FIFO buffer */ + w9966_write_reg(cam, 0x00, 0x00); /* Return to normal operation */ + w9966_write_reg(cam, 0x01, 0x98); /* Enable capture */ + + /* write special capture-addr and negotiate into data transfer */ + if ((parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0) || + (parport_write(cam->pport, &addr, 1) != 1) || + (parport_negotiate(cam->pport, cam->ppmode|IEEE1284_DATA) != 0)) { + w9966_pdev_release(cam); + mutex_unlock(&cam->lock); + return -EFAULT; + } + + tbuf = kmalloc(W9966_RBUFFER, GFP_KERNEL); + if (tbuf == NULL) { + count = -ENOMEM; + goto out; + } + + while (dleft > 0) { + unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft; + + if (parport_read(cam->pport, tbuf, tsize) < tsize) { + count = -EFAULT; + goto out; + } + if (copy_to_user(dest, tbuf, tsize) != 0) { + count = -EFAULT; + goto out; + } + dest += tsize; + dleft -= tsize; + } + + w9966_write_reg(cam, 0x01, 0x18); /* Disable capture */ + +out: + kfree(tbuf); + w9966_pdev_release(cam); + mutex_unlock(&cam->lock); + + return count; +} + +static const struct v4l2_file_operations w9966_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, + .read = w9966_v4l_read, +}; + +static const struct v4l2_ioctl_ops w9966_ioctl_ops = { + .vidioc_querycap = cam_querycap, + .vidioc_g_input = cam_g_input, + .vidioc_s_input = cam_s_input, + .vidioc_enum_input = cam_enum_input, + .vidioc_enum_fmt_vid_cap = cam_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = cam_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = cam_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = cam_try_fmt_vid_cap, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_ctrl_ops cam_ctrl_ops = { + .s_ctrl = cam_s_ctrl, +}; + + +/* Initialize camera device. Setup all internal flags, set a + default video mode, setup ccd-chip, register v4l device etc.. + Also used for 'probing' of hardware. + -1 on error */ +static int w9966_init(struct w9966 *cam, struct parport *port) +{ + struct v4l2_device *v4l2_dev = &cam->v4l2_dev; + + if (cam->dev_state != 0) + return -1; + + strlcpy(v4l2_dev->name, "w9966", sizeof(v4l2_dev->name)); + + if (v4l2_device_register(NULL, v4l2_dev) < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + return -1; + } + + v4l2_ctrl_handler_init(&cam->hdl, 4); + v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, + V4L2_CID_CONTRAST, -64, 64, 1, 64); + v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, + V4L2_CID_SATURATION, -64, 64, 1, 64); + v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + if (cam->hdl.error) { + v4l2_err(v4l2_dev, "couldn't register controls\n"); + return -1; + } + cam->pport = port; + cam->brightness = 128; + cam->contrast = 64; + cam->color = 64; + cam->hue = 0; + + /* Select requested transfer mode */ + switch (parmode) { + default: /* Auto-detect (priority: hw-ecp, hw-epp, sw-ecp) */ + case 0: + if (port->modes & PARPORT_MODE_ECP) + cam->ppmode = IEEE1284_MODE_ECP; + else if (port->modes & PARPORT_MODE_EPP) + cam->ppmode = IEEE1284_MODE_EPP; + else + cam->ppmode = IEEE1284_MODE_ECP; + break; + case 1: /* hw- or sw-ecp */ + cam->ppmode = IEEE1284_MODE_ECP; + break; + case 2: /* hw- or sw-epp */ + cam->ppmode = IEEE1284_MODE_EPP; + break; + } + + /* Tell the parport driver that we exists */ + cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL); + if (cam->pdev == NULL) { + DPRINTF("parport_register_device() failed\n"); + return -1; + } + w9966_set_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV); + + w9966_pdev_claim(cam); + + /* Setup a default capture mode */ + if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) { + DPRINTF("w9966_setup() failed.\n"); + return -1; + } + + w9966_pdev_release(cam); + + /* Fill in the video_device struct and register us to v4l */ + strlcpy(cam->vdev.name, W9966_DRIVERNAME, sizeof(cam->vdev.name)); + cam->vdev.v4l2_dev = v4l2_dev; + cam->vdev.fops = &w9966_fops; + cam->vdev.ioctl_ops = &w9966_ioctl_ops; + cam->vdev.release = video_device_release_empty; + cam->vdev.ctrl_handler = &cam->hdl; + set_bit(V4L2_FL_USE_FH_PRIO, &cam->vdev.flags); + video_set_drvdata(&cam->vdev, cam); + + mutex_init(&cam->lock); + + if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) + return -1; + + w9966_set_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV); + + /* All ok */ + v4l2_info(v4l2_dev, "Found and initialized a webcam on %s.\n", + cam->pport->name); + return 0; +} + + +/* Terminate everything gracefully */ +static void w9966_term(struct w9966 *cam) +{ + /* Unregister from v4l */ + if (w9966_get_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV)) { + video_unregister_device(&cam->vdev); + w9966_set_state(cam, W9966_STATE_VDEV, 0); + } + + v4l2_ctrl_handler_free(&cam->hdl); + + /* Terminate from IEEE1284 mode and release pdev block */ + if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) { + w9966_pdev_claim(cam); + parport_negotiate(cam->pport, IEEE1284_MODE_COMPAT); + w9966_pdev_release(cam); + } + + /* Unregister from parport */ + if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) { + parport_unregister_device(cam->pdev); + w9966_set_state(cam, W9966_STATE_PDEV, 0); + } + memset(cam, 0, sizeof(*cam)); +} + + +/* Called once for every parport on init */ +static void w9966_attach(struct parport *port) +{ + int i; + + for (i = 0; i < W9966_MAXCAMS; i++) { + if (w9966_cams[i].dev_state != 0) /* Cam is already assigned */ + continue; + if (strcmp(pardev[i], "aggressive") == 0 || strcmp(pardev[i], port->name) == 0) { + if (w9966_init(&w9966_cams[i], port) != 0) + w9966_term(&w9966_cams[i]); + break; /* return */ + } + } +} + +/* Called once for every parport on termination */ +static void w9966_detach(struct parport *port) +{ + int i; + + for (i = 0; i < W9966_MAXCAMS; i++) + if (w9966_cams[i].dev_state != 0 && w9966_cams[i].pport == port) + w9966_term(&w9966_cams[i]); +} + + +static struct parport_driver w9966_ppd = { + .name = W9966_DRIVERNAME, + .attach = w9966_attach, + .detach = w9966_detach, +}; + +/* Module entry point */ +static int __init w9966_mod_init(void) +{ + int i; + + for (i = 0; i < W9966_MAXCAMS; i++) + w9966_cams[i].dev_state = 0; + + return parport_register_driver(&w9966_ppd); +} + +/* Module cleanup */ +static void __exit w9966_mod_term(void) +{ + parport_unregister_driver(&w9966_ppd); +} + +module_init(w9966_mod_init); +module_exit(w9966_mod_term); |