diff options
Diffstat (limited to 'drivers/media/platform/arv.c')
| -rw-r--r-- | drivers/media/platform/arv.c | 885 |
1 files changed, 885 insertions, 0 deletions
diff --git a/drivers/media/platform/arv.c b/drivers/media/platform/arv.c new file mode 100644 index 00000000000..e346d32d08c --- /dev/null +++ b/drivers/media/platform/arv.c @@ -0,0 +1,885 @@ +/* + * Colour AR M64278(VGA) driver for Video4Linux + * + * Copyright (C) 2003 Takeo Takahashi <takahashi.takeo@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Some code is taken from AR driver sample program for M3T-M32700UT. + * + * AR driver sample (M32R SDK): + * Copyright (c) 2003 RENESAS TECHNOROGY CORPORATION + * AND RENESAS SOLUTIONS CORPORATION + * All Rights Reserved. + * + * 2003-09-01: Support w3cam by Takeo Takahashi + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-fh.h> +#include <linux/mutex.h> + +#include <asm/uaccess.h> +#include <asm/m32r.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/byteorder.h> + +#if 0 +#define DEBUG(n, args...) printk(KERN_INFO args) +#define CHECK_LOST 1 +#else +#define DEBUG(n, args...) +#define CHECK_LOST 0 +#endif + +/* + * USE_INT is always 0, interrupt mode is not available + * on linux due to lack of speed + */ +#define USE_INT 0 /* Don't modify */ + +#define VERSION "0.0.5" + +#define ar_inl(addr) inl((unsigned long)(addr)) +#define ar_outl(val, addr) outl((unsigned long)(val), (unsigned long)(addr)) + +extern struct cpuinfo_m32r boot_cpu_data; + +/* + * CCD pixel size + * Note that M32700UT does not support CIF mode, but QVGA is + * supported by M32700UT hardware using VGA mode of AR LSI. + * + * Supported: VGA (Normal mode, Interlace mode) + * QVGA (Always Interlace mode of VGA) + * + */ +#define AR_WIDTH_VGA 640 +#define AR_HEIGHT_VGA 480 +#define AR_WIDTH_QVGA 320 +#define AR_HEIGHT_QVGA 240 +#define MIN_AR_WIDTH AR_WIDTH_QVGA +#define MIN_AR_HEIGHT AR_HEIGHT_QVGA +#define MAX_AR_WIDTH AR_WIDTH_VGA +#define MAX_AR_HEIGHT AR_HEIGHT_VGA + +/* bits & bytes per pixel */ +#define AR_BITS_PER_PIXEL 16 +#define AR_BYTES_PER_PIXEL (AR_BITS_PER_PIXEL / 8) + +/* line buffer size */ +#define AR_LINE_BYTES_VGA (AR_WIDTH_VGA * AR_BYTES_PER_PIXEL) +#define AR_LINE_BYTES_QVGA (AR_WIDTH_QVGA * AR_BYTES_PER_PIXEL) +#define MAX_AR_LINE_BYTES AR_LINE_BYTES_VGA + +/* frame size & type */ +#define AR_FRAME_BYTES_VGA \ + (AR_WIDTH_VGA * AR_HEIGHT_VGA * AR_BYTES_PER_PIXEL) +#define AR_FRAME_BYTES_QVGA \ + (AR_WIDTH_QVGA * AR_HEIGHT_QVGA * AR_BYTES_PER_PIXEL) +#define MAX_AR_FRAME_BYTES \ + (MAX_AR_WIDTH * MAX_AR_HEIGHT * AR_BYTES_PER_PIXEL) + +#define AR_MAX_FRAME 15 + +/* capture size */ +#define AR_SIZE_VGA 0 +#define AR_SIZE_QVGA 1 + +/* capture mode */ +#define AR_MODE_INTERLACE 0 +#define AR_MODE_NORMAL 1 + +struct ar { + struct v4l2_device v4l2_dev; + struct video_device vdev; + unsigned int start_capture; /* duaring capture in INT. mode. */ +#if USE_INT + unsigned char *line_buff; /* DMA line buffer */ +#endif + unsigned char *frame[MAX_AR_HEIGHT]; /* frame data */ + short size; /* capture size */ + short mode; /* capture mode */ + int width, height; + int frame_bytes, line_bytes; + wait_queue_head_t wait; + struct mutex lock; +}; + +static struct ar ardev; + +static int video_nr = -1; /* video device number (first free) */ +static unsigned char yuv[MAX_AR_FRAME_BYTES]; + +/* module parameters */ +/* default frequency */ +#define DEFAULT_FREQ 50 /* 50 or 75 (MHz) is available as BCLK */ +static int freq = DEFAULT_FREQ; /* BCLK: available 50 or 70 (MHz) */ +static int vga; /* default mode(0:QVGA mode, other:VGA mode) */ +static int vga_interlace; /* 0 is normal mode for, else interlace mode */ +module_param(freq, int, 0); +module_param(vga, int, 0); +module_param(vga_interlace, int, 0); + +static void wait_for_vsync(void) +{ + while (ar_inl(ARVCR0) & ARVCR0_VDS) /* wait for VSYNC */ + cpu_relax(); + while (!(ar_inl(ARVCR0) & ARVCR0_VDS)) /* wait for VSYNC */ + cpu_relax(); +} + +static void wait_acknowledge(void) +{ + int i; + + for (i = 0; i < 1000; i++) + cpu_relax(); + while (ar_inl(PLDI2CSTS) & PLDI2CSTS_NOACK) + cpu_relax(); +} + +/******************************************************************* + * I2C functions + *******************************************************************/ +static void iic(int n, unsigned long addr, unsigned long data1, unsigned long data2, + unsigned long data3) +{ + int i; + + /* Slave Address */ + ar_outl(addr, PLDI2CDATA); + wait_for_vsync(); + + /* Start */ + ar_outl(1, PLDI2CCND); + wait_acknowledge(); + + /* Transfer data 1 */ + ar_outl(data1, PLDI2CDATA); + wait_for_vsync(); + ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); + wait_acknowledge(); + + /* Transfer data 2 */ + ar_outl(data2, PLDI2CDATA); + wait_for_vsync(); + ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); + wait_acknowledge(); + + if (n == 3) { + /* Transfer data 3 */ + ar_outl(data3, PLDI2CDATA); + wait_for_vsync(); + ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); + wait_acknowledge(); + } + + /* Stop */ + for (i = 0; i < 100; i++) + cpu_relax(); + ar_outl(2, PLDI2CCND); + ar_outl(2, PLDI2CCND); + + while (ar_inl(PLDI2CSTS) & PLDI2CSTS_BB) + cpu_relax(); +} + + +static void init_iic(void) +{ + DEBUG(1, "init_iic:\n"); + + /* + * ICU Setting (iic) + */ + /* I2C Setting */ + ar_outl(0x0, PLDI2CCR); /* I2CCR Disable */ + ar_outl(0x0300, PLDI2CMOD); /* I2CMOD ACK/8b-data/7b-addr/auto */ + ar_outl(0x1, PLDI2CACK); /* I2CACK ACK */ + + /* I2C CLK */ + /* 50MH-100k */ + if (freq == 75) + ar_outl(369, PLDI2CFREQ); /* BCLK = 75MHz */ + else if (freq == 50) + ar_outl(244, PLDI2CFREQ); /* BCLK = 50MHz */ + else + ar_outl(244, PLDI2CFREQ); /* default: BCLK = 50MHz */ + ar_outl(0x1, PLDI2CCR); /* I2CCR Enable */ +} + +/************************************************************************** + * + * Video4Linux Interface functions + * + **************************************************************************/ + +static inline void disable_dma(void) +{ + ar_outl(0x8000, M32R_DMAEN_PORTL); /* disable DMA0 */ +} + +static inline void enable_dma(void) +{ + ar_outl(0x8080, M32R_DMAEN_PORTL); /* enable DMA0 */ +} + +static inline void clear_dma_status(void) +{ + ar_outl(0x8000, M32R_DMAEDET_PORTL); /* clear status */ +} + +static void wait_for_vertical_sync(struct ar *ar, int exp_line) +{ +#if CHECK_LOST + int tmout = 10000; /* FIXME */ + int l; + + /* + * check HCOUNT because we cannot check vertical sync. + */ + for (; tmout >= 0; tmout--) { + l = ar_inl(ARVHCOUNT); + if (l == exp_line) + break; + } + if (tmout < 0) + v4l2_err(&ar->v4l2_dev, "lost %d -> %d\n", exp_line, l); +#else + while (ar_inl(ARVHCOUNT) != exp_line) + cpu_relax(); +#endif +} + +static ssize_t ar_read(struct file *file, char *buf, size_t count, loff_t *ppos) +{ + struct ar *ar = video_drvdata(file); + long ret = ar->frame_bytes; /* return read bytes */ + unsigned long arvcr1 = 0; + unsigned long flags; + unsigned char *p; + int h, w; + unsigned char *py, *pu, *pv; +#if !USE_INT + int l; +#endif + + DEBUG(1, "ar_read()\n"); + + if (ar->size == AR_SIZE_QVGA) + arvcr1 |= ARVCR1_QVGA; + if (ar->mode == AR_MODE_NORMAL) + arvcr1 |= ARVCR1_NORMAL; + + mutex_lock(&ar->lock); + +#if USE_INT + local_irq_save(flags); + disable_dma(); + ar_outl(0xa1871300, M32R_DMA0CR0_PORTL); + ar_outl(0x01000000, M32R_DMA0CR1_PORTL); + + /* set AR FIFO address as source(BSEL5) */ + ar_outl(ARDATA32, M32R_DMA0CSA_PORTL); + ar_outl(ARDATA32, M32R_DMA0RSA_PORTL); + ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); /* destination addr. */ + ar_outl(ar->line_buff, M32R_DMA0RDA_PORTL); /* reload address */ + ar_outl(ar->line_bytes, M32R_DMA0CBCUT_PORTL); /* byte count (bytes) */ + ar_outl(ar->line_bytes, M32R_DMA0RBCUT_PORTL); /* reload count (bytes) */ + + /* + * Okay, kick AR LSI to invoke an interrupt + */ + ar->start_capture = 0; + ar_outl(arvcr1 | ARVCR1_HIEN, ARVCR1); + local_irq_restore(flags); + /* .... AR interrupts .... */ + interruptible_sleep_on(&ar->wait); + if (signal_pending(current)) { + printk(KERN_ERR "arv: interrupted while get frame data.\n"); + ret = -EINTR; + goto out_up; + } +#else /* ! USE_INT */ + /* polling */ + ar_outl(arvcr1, ARVCR1); + disable_dma(); + ar_outl(0x8000, M32R_DMAEDET_PORTL); + ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); + ar_outl(0x01000000, M32R_DMA0CR1_PORTL); + ar_outl(ARDATA32, M32R_DMA0CSA_PORTL); + ar_outl(ARDATA32, M32R_DMA0RSA_PORTL); + ar_outl(ar->line_bytes, M32R_DMA0CBCUT_PORTL); + ar_outl(ar->line_bytes, M32R_DMA0RBCUT_PORTL); + + local_irq_save(flags); + while (ar_inl(ARVHCOUNT) != 0) /* wait for 0 */ + cpu_relax(); + if (ar->mode == AR_MODE_INTERLACE && ar->size == AR_SIZE_VGA) { + for (h = 0; h < ar->height; h++) { + wait_for_vertical_sync(ar, h); + if (h < (AR_HEIGHT_VGA/2)) + l = h << 1; + else + l = (((h - (AR_HEIGHT_VGA/2)) << 1) + 1); + ar_outl(virt_to_phys(ar->frame[l]), M32R_DMA0CDA_PORTL); + enable_dma(); + while (!(ar_inl(M32R_DMAEDET_PORTL) & 0x8000)) + cpu_relax(); + disable_dma(); + clear_dma_status(); + ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); + } + } else { + for (h = 0; h < ar->height; h++) { + wait_for_vertical_sync(ar, h); + ar_outl(virt_to_phys(ar->frame[h]), M32R_DMA0CDA_PORTL); + enable_dma(); + while (!(ar_inl(M32R_DMAEDET_PORTL) & 0x8000)) + cpu_relax(); + disable_dma(); + clear_dma_status(); + ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); + } + } + local_irq_restore(flags); +#endif /* ! USE_INT */ + + /* + * convert YUV422 to YUV422P + * +--------------------+ + * | Y0,Y1,... | + * | ..............Yn | + * +--------------------+ + * | U0,U1,........Un | + * +--------------------+ + * | V0,V1,........Vn | + * +--------------------+ + */ + py = yuv; + pu = py + (ar->frame_bytes / 2); + pv = pu + (ar->frame_bytes / 4); + for (h = 0; h < ar->height; h++) { + p = ar->frame[h]; + for (w = 0; w < ar->line_bytes; w += 4) { + *py++ = *p++; + *pu++ = *p++; + *py++ = *p++; + *pv++ = *p++; + } + } + if (copy_to_user(buf, yuv, ar->frame_bytes)) { + v4l2_err(&ar->v4l2_dev, "failed while copy_to_user yuv.\n"); + ret = -EFAULT; + goto out_up; + } + DEBUG(1, "ret = %d\n", ret); +out_up: + mutex_unlock(&ar->lock); + return ret; +} + +static int ar_querycap(struct file *file, void *priv, + struct v4l2_capability *vcap) +{ + struct ar *ar = video_drvdata(file); + + strlcpy(vcap->driver, ar->vdev.name, sizeof(vcap->driver)); + strlcpy(vcap->card, "Colour AR VGA", sizeof(vcap->card)); + strlcpy(vcap->bus_info, "Platform", sizeof(vcap->bus_info)); + vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; + vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int ar_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + if (vin->index > 0) + return -EINVAL; + strlcpy(vin->name, "Camera", sizeof(vin->name)); + vin->type = V4L2_INPUT_TYPE_CAMERA; + vin->audioset = 0; + vin->tuner = 0; + vin->std = V4L2_STD_ALL; + vin->status = 0; + return 0; +} + +static int ar_g_input(struct file *file, void *fh, unsigned int *inp) +{ + *inp = 0; + return 0; +} + +static int ar_s_input(struct file *file, void *fh, unsigned int inp) +{ + return inp ? -EINVAL : 0; +} + +static int ar_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ar *ar = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + pix->width = ar->width; + pix->height = ar->height; + pix->pixelformat = V4L2_PIX_FMT_YUV422P; + pix->field = (ar->mode == AR_MODE_NORMAL) ? V4L2_FIELD_NONE : V4L2_FIELD_INTERLACED; + pix->bytesperline = ar->width; + pix->sizeimage = 2 * ar->width * ar->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int ar_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ar *ar = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->height <= AR_HEIGHT_QVGA || pix->width <= AR_WIDTH_QVGA) { + pix->height = AR_HEIGHT_QVGA; + pix->width = AR_WIDTH_QVGA; + pix->field = V4L2_FIELD_INTERLACED; + } else { + pix->height = AR_HEIGHT_VGA; + pix->width = AR_WIDTH_VGA; + pix->field = vga_interlace ? V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE; + } + pix->pixelformat = V4L2_PIX_FMT_YUV422P; + pix->bytesperline = ar->width; + pix->sizeimage = 2 * ar->width * ar->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + return 0; +} + +static int ar_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct ar *ar = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + int ret = ar_try_fmt_vid_cap(file, fh, fmt); + + if (ret) + return ret; + mutex_lock(&ar->lock); + ar->width = pix->width; + ar->height = pix->height; + if (ar->width == AR_WIDTH_VGA) { + ar->size = AR_SIZE_VGA; + ar->frame_bytes = AR_FRAME_BYTES_VGA; + ar->line_bytes = AR_LINE_BYTES_VGA; + if (vga_interlace) + ar->mode = AR_MODE_INTERLACE; + else + ar->mode = AR_MODE_NORMAL; + } else { + ar->size = AR_SIZE_QVGA; + ar->frame_bytes = AR_FRAME_BYTES_QVGA; + ar->line_bytes = AR_LINE_BYTES_QVGA; + ar->mode = AR_MODE_INTERLACE; + } + /* Ok we figured out what to use from our wide choice */ + mutex_unlock(&ar->lock); + return 0; +} + +static int ar_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) +{ + static struct v4l2_fmtdesc formats[] = { + { 0, 0, 0, + "YUV 4:2:2 Planar", V4L2_PIX_FMT_YUV422P, + { 0, 0, 0, 0 } + }, + }; + enum v4l2_buf_type type = fmt->type; + + if (fmt->index > 0) + return -EINVAL; + + *fmt = formats[fmt->index]; + fmt->type = type; + return 0; +} + +#if USE_INT +/* + * Interrupt handler + */ +static void ar_interrupt(int irq, void *dev) +{ + struct ar *ar = dev; + unsigned int line_count; + unsigned int line_number; + unsigned int arvcr1; + + line_count = ar_inl(ARVHCOUNT); /* line number */ + if (ar->mode == AR_MODE_INTERLACE && ar->size == AR_SIZE_VGA) { + /* operations for interlace mode */ + if (line_count < (AR_HEIGHT_VGA / 2)) /* even line */ + line_number = (line_count << 1); + else /* odd line */ + line_number = + (((line_count - (AR_HEIGHT_VGA / 2)) << 1) + 1); + } else { + line_number = line_count; + } + + if (line_number == 0) { + /* + * It is an interrupt for line 0. + * we have to start capture. + */ + disable_dma(); +#if 0 + ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); /* needless? */ +#endif + memcpy(ar->frame[0], ar->line_buff, ar->line_bytes); +#if 0 + ar_outl(0xa1861300, M32R_DMA0CR0_PORTL); +#endif + enable_dma(); + ar->start_capture = 1; /* during capture */ + return; + } + + if (ar->start_capture == 1 && line_number <= (ar->height - 1)) { + disable_dma(); + memcpy(ar->frame[line_number], ar->line_buff, ar->line_bytes); + + /* + * if captured all line of a frame, disable AR interrupt + * and wake a process up. + */ + if (line_number == (ar->height - 1)) { /* end of line */ + + ar->start_capture = 0; + + /* disable AR interrupt request */ + arvcr1 = ar_inl(ARVCR1); + arvcr1 &= ~ARVCR1_HIEN; /* clear int. flag */ + ar_outl(arvcr1, ARVCR1); /* disable */ + wake_up_interruptible(&ar->wait); + } else { +#if 0 + ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); + ar_outl(0xa1861300, M32R_DMA0CR0_PORTL); +#endif + enable_dma(); + } + } +} +#endif + +/* + * ar_initialize() + * ar_initialize() is called by video_register_device() and + * initializes AR LSI and peripherals. + * + * -1 is returned in all failures. + * 0 is returned in success. + * + */ +static int ar_initialize(struct ar *ar) +{ + unsigned long cr = 0; + int i, found = 0; + + DEBUG(1, "ar_initialize:\n"); + + /* + * initialize AR LSI + */ + ar_outl(0, ARVCR0); /* assert reset of AR LSI */ + for (i = 0; i < 0x18; i++) /* wait for over 10 cycles @ 27MHz */ + cpu_relax(); + ar_outl(ARVCR0_RST, ARVCR0); /* negate reset of AR LSI (enable) */ + for (i = 0; i < 0x40d; i++) /* wait for over 420 cycles @ 27MHz */ + cpu_relax(); + + /* AR uses INT3 of CPU as interrupt pin. */ + ar_outl(ARINTSEL_INT3, ARINTSEL); + + if (ar->size == AR_SIZE_QVGA) + cr |= ARVCR1_QVGA; + if (ar->mode == AR_MODE_NORMAL) + cr |= ARVCR1_NORMAL; + ar_outl(cr, ARVCR1); + + /* + * Initialize IIC so that CPU can communicate with AR LSI, + * and send boot commands to AR LSI. + */ + init_iic(); + + for (i = 0; i < 0x100000; i++) { /* > 0xa1d10, 56ms */ + if ((ar_inl(ARVCR0) & ARVCR0_VDS)) { /* VSYNC */ + found = 1; + break; + } + } + + if (found == 0) + return -ENODEV; + + v4l2_info(&ar->v4l2_dev, "Initializing "); + + iic(2, 0x78, 0x11, 0x01, 0x00); /* start */ + iic(3, 0x78, 0x12, 0x00, 0x06); + iic(3, 0x78, 0x12, 0x12, 0x30); + iic(3, 0x78, 0x12, 0x15, 0x58); + iic(3, 0x78, 0x12, 0x17, 0x30); + printk(KERN_CONT "."); + iic(3, 0x78, 0x12, 0x1a, 0x97); + iic(3, 0x78, 0x12, 0x1b, 0xff); + iic(3, 0x78, 0x12, 0x1c, 0xff); + iic(3, 0x78, 0x12, 0x26, 0x10); + iic(3, 0x78, 0x12, 0x27, 0x00); + printk(KERN_CONT "."); + iic(2, 0x78, 0x34, 0x02, 0x00); + iic(2, 0x78, 0x7a, 0x10, 0x00); + iic(2, 0x78, 0x80, 0x39, 0x00); + iic(2, 0x78, 0x81, 0xe6, 0x00); + iic(2, 0x78, 0x8d, 0x00, 0x00); + printk(KERN_CONT "."); + iic(2, 0x78, 0x8e, 0x0c, 0x00); + iic(2, 0x78, 0x8f, 0x00, 0x00); +#if 0 + iic(2, 0x78, 0x90, 0x00, 0x00); /* AWB on=1 off=0 */ +#endif + iic(2, 0x78, 0x93, 0x01, 0x00); + iic(2, 0x78, 0x94, 0xcd, 0x00); + iic(2, 0x78, 0x95, 0x00, 0x00); + printk(KERN_CONT "."); + iic(2, 0x78, 0x96, 0xa0, 0x00); + iic(2, 0x78, 0x97, 0x00, 0x00); + iic(2, 0x78, 0x98, 0x60, 0x00); + iic(2, 0x78, 0x99, 0x01, 0x00); + iic(2, 0x78, 0x9a, 0x19, 0x00); + printk(KERN_CONT "."); + iic(2, 0x78, 0x9b, 0x02, 0x00); + iic(2, 0x78, 0x9c, 0xe8, 0x00); + iic(2, 0x78, 0x9d, 0x02, 0x00); + iic(2, 0x78, 0x9e, 0x2e, 0x00); + iic(2, 0x78, 0xb8, 0x78, 0x00); + iic(2, 0x78, 0xba, 0x05, 0x00); +#if 0 + iic(2, 0x78, 0x83, 0x8c, 0x00); /* brightness */ +#endif + printk(KERN_CONT "."); + + /* color correction */ + iic(3, 0x78, 0x49, 0x00, 0x95); /* a */ + iic(3, 0x78, 0x49, 0x01, 0x96); /* b */ + iic(3, 0x78, 0x49, 0x03, 0x85); /* c */ + iic(3, 0x78, 0x49, 0x04, 0x97); /* d */ + iic(3, 0x78, 0x49, 0x02, 0x7e); /* e(Lo) */ + iic(3, 0x78, 0x49, 0x05, 0xa4); /* f(Lo) */ + iic(3, 0x78, 0x49, 0x06, 0x04); /* e(Hi) */ + iic(3, 0x78, 0x49, 0x07, 0x04); /* e(Hi) */ + iic(2, 0x78, 0x48, 0x01, 0x00); /* on=1 off=0 */ + + printk(KERN_CONT "."); + iic(2, 0x78, 0x11, 0x00, 0x00); /* end */ + printk(KERN_CONT " done\n"); + return 0; +} + + +/**************************************************************************** + * + * Video4Linux Module functions + * + ****************************************************************************/ + +static const struct v4l2_file_operations ar_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .read = ar_read, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops ar_ioctl_ops = { + .vidioc_querycap = ar_querycap, + .vidioc_g_input = ar_g_input, + .vidioc_s_input = ar_s_input, + .vidioc_enum_input = ar_enum_input, + .vidioc_enum_fmt_vid_cap = ar_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = ar_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = ar_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = ar_try_fmt_vid_cap, +}; + +#define ALIGN4(x) ((((int)(x)) & 0x3) == 0) + +static int __init ar_init(void) +{ + struct ar *ar; + struct v4l2_device *v4l2_dev; + int ret; + int i; + + ar = &ardev; + v4l2_dev = &ar->v4l2_dev; + strlcpy(v4l2_dev->name, "arv", sizeof(v4l2_dev->name)); + v4l2_info(v4l2_dev, "Colour AR VGA driver %s\n", VERSION); + + ret = v4l2_device_register(NULL, v4l2_dev); + if (ret < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + return ret; + } + ret = -EIO; + +#if USE_INT + /* allocate a DMA buffer for 1 line. */ + ar->line_buff = kmalloc(MAX_AR_LINE_BYTES, GFP_KERNEL | GFP_DMA); + if (ar->line_buff == NULL || !ALIGN4(ar->line_buff)) { + v4l2_err(v4l2_dev, "buffer allocation failed for DMA.\n"); + ret = -ENOMEM; + goto out_end; + } +#endif + /* allocate buffers for a frame */ + for (i = 0; i < MAX_AR_HEIGHT; i++) { + ar->frame[i] = kmalloc(MAX_AR_LINE_BYTES, GFP_KERNEL); + if (ar->frame[i] == NULL || !ALIGN4(ar->frame[i])) { + v4l2_err(v4l2_dev, "buffer allocation failed for frame.\n"); + ret = -ENOMEM; + goto out_line_buff; + } + } + + strlcpy(ar->vdev.name, "Colour AR VGA", sizeof(ar->vdev.name)); + ar->vdev.v4l2_dev = v4l2_dev; + ar->vdev.fops = &ar_fops; + ar->vdev.ioctl_ops = &ar_ioctl_ops; + ar->vdev.release = video_device_release_empty; + set_bit(V4L2_FL_USE_FH_PRIO, &ar->vdev.flags); + video_set_drvdata(&ar->vdev, ar); + + if (vga) { + ar->width = AR_WIDTH_VGA; + ar->height = AR_HEIGHT_VGA; + ar->size = AR_SIZE_VGA; + ar->frame_bytes = AR_FRAME_BYTES_VGA; + ar->line_bytes = AR_LINE_BYTES_VGA; + if (vga_interlace) + ar->mode = AR_MODE_INTERLACE; + else + ar->mode = AR_MODE_NORMAL; + } else { + ar->width = AR_WIDTH_QVGA; + ar->height = AR_HEIGHT_QVGA; + ar->size = AR_SIZE_QVGA; + ar->frame_bytes = AR_FRAME_BYTES_QVGA; + ar->line_bytes = AR_LINE_BYTES_QVGA; + ar->mode = AR_MODE_INTERLACE; + } + mutex_init(&ar->lock); + init_waitqueue_head(&ar->wait); + +#if USE_INT + if (request_irq(M32R_IRQ_INT3, ar_interrupt, 0, "arv", ar)) { + v4l2_err("request_irq(%d) failed.\n", M32R_IRQ_INT3); + ret = -EIO; + goto out_irq; + } +#endif + + if (ar_initialize(ar) != 0) { + v4l2_err(v4l2_dev, "M64278 not found.\n"); + ret = -ENODEV; + goto out_dev; + } + + /* + * ok, we can initialize h/w according to parameters, + * so register video device as a frame grabber type. + * device is named "video[0-64]". + * video_register_device() initializes h/w using ar_initialize(). + */ + if (video_register_device(&ar->vdev, VFL_TYPE_GRABBER, video_nr) != 0) { + /* return -1, -ENFILE(full) or others */ + v4l2_err(v4l2_dev, "register video (Colour AR) failed.\n"); + ret = -ENODEV; + goto out_dev; + } + + v4l2_info(v4l2_dev, "%s: Found M64278 VGA (IRQ %d, Freq %dMHz).\n", + video_device_node_name(&ar->vdev), M32R_IRQ_INT3, freq); + + return 0; + +out_dev: +#if USE_INT + free_irq(M32R_IRQ_INT3, ar); + +out_irq: +#endif + for (i = 0; i < MAX_AR_HEIGHT; i++) + kfree(ar->frame[i]); + +out_line_buff: +#if USE_INT + kfree(ar->line_buff); + +out_end: +#endif + v4l2_device_unregister(&ar->v4l2_dev); + return ret; +} + + +static int __init ar_init_module(void) +{ + freq = (boot_cpu_data.bus_clock / 1000000); + printk(KERN_INFO "arv: Bus clock %d\n", freq); + if (freq != 50 && freq != 75) + freq = DEFAULT_FREQ; + return ar_init(); +} + +static void __exit ar_cleanup_module(void) +{ + struct ar *ar; + int i; + + ar = &ardev; + video_unregister_device(&ar->vdev); +#if USE_INT + free_irq(M32R_IRQ_INT3, ar); +#endif + for (i = 0; i < MAX_AR_HEIGHT; i++) + kfree(ar->frame[i]); +#if USE_INT + kfree(ar->line_buff); +#endif + v4l2_device_unregister(&ar->v4l2_dev); +} + +module_init(ar_init_module); +module_exit(ar_cleanup_module); + +MODULE_AUTHOR("Takeo Takahashi <takahashi.takeo@renesas.com>"); +MODULE_DESCRIPTION("Colour AR M64278(VGA) for Video4Linux"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(VERSION); |