summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform/exynos4-is/fimc-lite-reg.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/platform/exynos4-is/fimc-lite-reg.c')
-rw-r--r--drivers/media/platform/exynos4-is/fimc-lite-reg.c302
1 files changed, 302 insertions, 0 deletions
diff --git a/drivers/media/platform/exynos4-is/fimc-lite-reg.c b/drivers/media/platform/exynos4-is/fimc-lite-reg.c
new file mode 100644
index 00000000000..8cc0d39a2fe
--- /dev/null
+++ b/drivers/media/platform/exynos4-is/fimc-lite-reg.c
@@ -0,0 +1,302 @@
+/*
+ * Register interface file for EXYNOS FIMC-LITE (camera interface) driver
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <media/s5p_fimc.h>
+
+#include "fimc-lite-reg.h"
+#include "fimc-lite.h"
+#include "fimc-core.h"
+
+#define FLITE_RESET_TIMEOUT 50 /* in ms */
+
+void flite_hw_reset(struct fimc_lite *dev)
+{
+ unsigned long end = jiffies + msecs_to_jiffies(FLITE_RESET_TIMEOUT);
+ u32 cfg;
+
+ cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+ cfg |= FLITE_REG_CIGCTRL_SWRST_REQ;
+ writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+ while (time_is_after_jiffies(end)) {
+ cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+ if (cfg & FLITE_REG_CIGCTRL_SWRST_RDY)
+ break;
+ usleep_range(1000, 5000);
+ }
+
+ cfg |= FLITE_REG_CIGCTRL_SWRST;
+ writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+void flite_hw_clear_pending_irq(struct fimc_lite *dev)
+{
+ u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS);
+ cfg &= ~FLITE_REG_CISTATUS_IRQ_CAM;
+ writel(cfg, dev->regs + FLITE_REG_CISTATUS);
+}
+
+u32 flite_hw_get_interrupt_source(struct fimc_lite *dev)
+{
+ u32 intsrc = readl(dev->regs + FLITE_REG_CISTATUS);
+ return intsrc & FLITE_REG_CISTATUS_IRQ_MASK;
+}
+
+void flite_hw_clear_last_capture_end(struct fimc_lite *dev)
+{
+
+ u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS2);
+ cfg &= ~FLITE_REG_CISTATUS2_LASTCAPEND;
+ writel(cfg, dev->regs + FLITE_REG_CISTATUS2);
+}
+
+void flite_hw_set_interrupt_mask(struct fimc_lite *dev)
+{
+ u32 cfg, intsrc;
+
+ /* Select interrupts to be enabled for each output mode */
+ if (atomic_read(&dev->out_path) == FIMC_IO_DMA) {
+ intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
+ FLITE_REG_CIGCTRL_IRQ_LASTEN |
+ FLITE_REG_CIGCTRL_IRQ_STARTEN;
+ } else {
+ /* An output to the FIMC-IS */
+ intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
+ FLITE_REG_CIGCTRL_IRQ_LASTEN;
+ }
+
+ cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+ cfg |= FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK;
+ cfg &= ~intsrc;
+ writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+void flite_hw_capture_start(struct fimc_lite *dev)
+{
+ u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
+ cfg |= FLITE_REG_CIIMGCPT_IMGCPTEN;
+ writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
+}
+
+void flite_hw_capture_stop(struct fimc_lite *dev)
+{
+ u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
+ cfg &= ~FLITE_REG_CIIMGCPT_IMGCPTEN;
+ writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
+}
+
+/*
+ * Test pattern (color bars) enable/disable. External sensor
+ * pixel clock must be active for the test pattern to work.
+ */
+void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on)
+{
+ u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+ if (on)
+ cfg |= FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
+ else
+ cfg &= ~FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
+ writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+static const u32 src_pixfmt_map[8][3] = {
+ { V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR,
+ FLITE_REG_CIGCTRL_YUV422_1P },
+ { V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB,
+ FLITE_REG_CIGCTRL_YUV422_1P },
+ { V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY,
+ FLITE_REG_CIGCTRL_YUV422_1P },
+ { V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY,
+ FLITE_REG_CIGCTRL_YUV422_1P },
+ { V4L2_MBUS_FMT_SGRBG8_1X8, 0, FLITE_REG_CIGCTRL_RAW8 },
+ { V4L2_MBUS_FMT_SGRBG10_1X10, 0, FLITE_REG_CIGCTRL_RAW10 },
+ { V4L2_MBUS_FMT_SGRBG12_1X12, 0, FLITE_REG_CIGCTRL_RAW12 },
+ { V4L2_MBUS_FMT_JPEG_1X8, 0, FLITE_REG_CIGCTRL_USER(1) },
+};
+
+/* Set camera input pixel format and resolution */
+void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f)
+{
+ enum v4l2_mbus_pixelcode pixelcode = f->fmt->mbus_code;
+ int i = ARRAY_SIZE(src_pixfmt_map);
+ u32 cfg;
+
+ while (--i >= 0) {
+ if (src_pixfmt_map[i][0] == pixelcode)
+ break;
+ }
+
+ if (i == 0 && src_pixfmt_map[i][0] != pixelcode) {
+ v4l2_err(&dev->vfd,
+ "Unsupported pixel code, falling back to %#08x\n",
+ src_pixfmt_map[i][0]);
+ }
+
+ cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+ cfg &= ~FLITE_REG_CIGCTRL_FMT_MASK;
+ cfg |= src_pixfmt_map[i][2];
+ writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+ cfg = readl(dev->regs + FLITE_REG_CISRCSIZE);
+ cfg &= ~(FLITE_REG_CISRCSIZE_ORDER422_MASK |
+ FLITE_REG_CISRCSIZE_SIZE_CAM_MASK);
+ cfg |= (f->f_width << 16) | f->f_height;
+ cfg |= src_pixfmt_map[i][1];
+ writel(cfg, dev->regs + FLITE_REG_CISRCSIZE);
+}
+
+/* Set the camera host input window offsets (cropping) */
+void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f)
+{
+ u32 hoff2, voff2;
+ u32 cfg;
+
+ cfg = readl(dev->regs + FLITE_REG_CIWDOFST);
+ cfg &= ~FLITE_REG_CIWDOFST_OFST_MASK;
+ cfg |= (f->rect.left << 16) | f->rect.top;
+ cfg |= FLITE_REG_CIWDOFST_WINOFSEN;
+ writel(cfg, dev->regs + FLITE_REG_CIWDOFST);
+
+ hoff2 = f->f_width - f->rect.width - f->rect.left;
+ voff2 = f->f_height - f->rect.height - f->rect.top;
+
+ cfg = (hoff2 << 16) | voff2;
+ writel(cfg, dev->regs + FLITE_REG_CIWDOFST2);
+}
+
+/* Select camera port (A, B) */
+static void flite_hw_set_camera_port(struct fimc_lite *dev, int id)
+{
+ u32 cfg = readl(dev->regs + FLITE_REG_CIGENERAL);
+ if (id == 0)
+ cfg &= ~FLITE_REG_CIGENERAL_CAM_B;
+ else
+ cfg |= FLITE_REG_CIGENERAL_CAM_B;
+ writel(cfg, dev->regs + FLITE_REG_CIGENERAL);
+}
+
+/* Select serial or parallel bus, camera port (A,B) and set signals polarity */
+void flite_hw_set_camera_bus(struct fimc_lite *dev,
+ struct fimc_source_info *si)
+{
+ u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+ unsigned int flags = si->flags;
+
+ if (si->sensor_bus_type != FIMC_BUS_TYPE_MIPI_CSI2) {
+ cfg &= ~(FLITE_REG_CIGCTRL_SELCAM_MIPI |
+ FLITE_REG_CIGCTRL_INVPOLPCLK |
+ FLITE_REG_CIGCTRL_INVPOLVSYNC |
+ FLITE_REG_CIGCTRL_INVPOLHREF);
+
+ if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
+ cfg |= FLITE_REG_CIGCTRL_INVPOLPCLK;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+ cfg |= FLITE_REG_CIGCTRL_INVPOLVSYNC;
+
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+ cfg |= FLITE_REG_CIGCTRL_INVPOLHREF;
+ } else {
+ cfg |= FLITE_REG_CIGCTRL_SELCAM_MIPI;
+ }
+
+ writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+ flite_hw_set_camera_port(dev, si->mux_id);
+}
+
+static void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f)
+{
+ static const u32 pixcode[4][2] = {
+ { V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CIODMAFMT_YCBYCR },
+ { V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CIODMAFMT_YCRYCB },
+ { V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CIODMAFMT_CBYCRY },
+ { V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY },
+ };
+ u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
+ int i = ARRAY_SIZE(pixcode);
+
+ while (--i >= 0)
+ if (pixcode[i][0] == f->fmt->mbus_code)
+ break;
+ cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK;
+ writel(cfg | pixcode[i][1], dev->regs + FLITE_REG_CIODMAFMT);
+}
+
+void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f)
+{
+ u32 cfg;
+
+ /* Maximum output pixel size */
+ cfg = readl(dev->regs + FLITE_REG_CIOCAN);
+ cfg &= ~FLITE_REG_CIOCAN_MASK;
+ cfg = (f->f_height << 16) | f->f_width;
+ writel(cfg, dev->regs + FLITE_REG_CIOCAN);
+
+ /* DMA offsets */
+ cfg = readl(dev->regs + FLITE_REG_CIOOFF);
+ cfg &= ~FLITE_REG_CIOOFF_MASK;
+ cfg |= (f->rect.top << 16) | f->rect.left;
+ writel(cfg, dev->regs + FLITE_REG_CIOOFF);
+}
+
+/* Enable/disable output DMA, set output pixel size and offsets (composition) */
+void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f,
+ bool enable)
+{
+ u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+
+ if (!enable) {
+ cfg |= FLITE_REG_CIGCTRL_ODMA_DISABLE;
+ writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+ return;
+ }
+
+ cfg &= ~FLITE_REG_CIGCTRL_ODMA_DISABLE;
+ writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+ flite_hw_set_out_order(dev, f);
+ flite_hw_set_dma_window(dev, f);
+}
+
+void flite_hw_dump_regs(struct fimc_lite *dev, const char *label)
+{
+ struct {
+ u32 offset;
+ const char * const name;
+ } registers[] = {
+ { 0x00, "CISRCSIZE" },
+ { 0x04, "CIGCTRL" },
+ { 0x08, "CIIMGCPT" },
+ { 0x0c, "CICPTSEQ" },
+ { 0x10, "CIWDOFST" },
+ { 0x14, "CIWDOFST2" },
+ { 0x18, "CIODMAFMT" },
+ { 0x20, "CIOCAN" },
+ { 0x24, "CIOOFF" },
+ { 0x30, "CIOSA" },
+ { 0x40, "CISTATUS" },
+ { 0x44, "CISTATUS2" },
+ { 0xf0, "CITHOLD" },
+ { 0xfc, "CIGENERAL" },
+ };
+ u32 i;
+
+ v4l2_info(&dev->subdev, "--- %s ---\n", label);
+
+ for (i = 0; i < ARRAY_SIZE(registers); i++) {
+ u32 cfg = readl(dev->regs + registers[i].offset);
+ v4l2_info(&dev->subdev, "%9s: 0x%08x\n",
+ registers[i].name, cfg);
+ }
+}