diff options
Diffstat (limited to 'drivers/media/rc/fintek-cir.h')
| -rw-r--r-- | drivers/media/rc/fintek-cir.h | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/drivers/media/rc/fintek-cir.h b/drivers/media/rc/fintek-cir.h new file mode 100644 index 00000000000..1b10b2011f5 --- /dev/null +++ b/drivers/media/rc/fintek-cir.h @@ -0,0 +1,243 @@ +/* + * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR + * + * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com> + * + * Special thanks to Fintek for providing hardware and spec sheets. + * This driver is based upon the nuvoton, ite and ene drivers for + * similar hardware. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include <linux/spinlock.h> +#include <linux/ioctl.h> + +/* platform driver name to register */ +#define FINTEK_DRIVER_NAME "fintek-cir" +#define FINTEK_DESCRIPTION "Fintek LPC SuperIO Consumer IR Transceiver" +#define VENDOR_ID_FINTEK 0x1934 + + +/* debugging module parameter */ +static int debug; + +#define fit_pr(level, text, ...) \ + printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__) + +#define fit_dbg(text, ...) \ + if (debug) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + +#define fit_dbg_verbose(text, ...) \ + if (debug > 1) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + +#define fit_dbg_wake(text, ...) \ + if (debug > 2) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + + +#define TX_BUF_LEN 256 +#define RX_BUF_LEN 32 + +struct fintek_dev { + struct pnp_dev *pdev; + struct rc_dev *rdev; + + spinlock_t fintek_lock; + + /* for rx */ + u8 buf[RX_BUF_LEN]; + unsigned int pkts; + + struct { + spinlock_t lock; + u8 buf[TX_BUF_LEN]; + unsigned int buf_count; + unsigned int cur_buf_num; + wait_queue_head_t queue; + } tx; + + /* Config register index/data port pair */ + u8 cr_ip; + u8 cr_dp; + + /* hardware I/O settings */ + unsigned long cir_addr; + int cir_irq; + int cir_port_len; + + /* hardware id */ + u8 chip_major; + u8 chip_minor; + u16 chip_vendor; + + /* hardware features */ + bool hw_learning_capable; + bool hw_tx_capable; + + /* rx settings */ + bool learning_enabled; + bool carrier_detect_enabled; + + enum { + CMD_HEADER = 0, + SUBCMD, + CMD_DATA, + PARSE_IRDATA, + } parser_state; + + u8 cmd, rem; + + /* carrier period = 1 / frequency */ + u32 carrier; +}; + +/* buffer packet constants, largely identical to mceusb.c */ +#define BUF_PULSE_BIT 0x80 +#define BUF_LEN_MASK 0x1f +#define BUF_SAMPLE_MASK 0x7f + +#define BUF_COMMAND_HEADER 0x9f +#define BUF_COMMAND_MASK 0xe0 +#define BUF_COMMAND_NULL 0x00 +#define BUF_HW_CMD_HEADER 0xff +#define BUF_CMD_G_REVISION 0x0b +#define BUF_CMD_S_CARRIER 0x06 +#define BUF_CMD_S_TIMEOUT 0x0c +#define BUF_CMD_SIG_END 0x01 +#define BUF_CMD_S_TXMASK 0x08 +#define BUF_CMD_S_RXSENSOR 0x14 +#define BUF_RSP_PULSE_COUNT 0x15 + +#define CIR_SAMPLE_PERIOD 50 + +/* + * Configuration Register: + * Index Port + * Data Port + */ +#define CR_INDEX_PORT 0x2e +#define CR_DATA_PORT 0x2f + +/* Possible alternate values, depends on how the chip is wired */ +#define CR_INDEX_PORT2 0x4e +#define CR_DATA_PORT2 0x4f + +/* + * GCR_CONFIG_PORT_SEL bit 4 specifies which Index Port value is + * active. 1 = 0x4e, 0 = 0x2e + */ +#define PORT_SEL_PORT_4E_EN 0x10 + +/* Extended Function Mode enable/disable magic values */ +#define CONFIG_REG_ENABLE 0x87 +#define CONFIG_REG_DISABLE 0xaa + +/* Chip IDs found in CR_CHIP_ID_{HI,LO} */ +#define CHIP_ID_HIGH_F71809U 0x04 +#define CHIP_ID_LOW_F71809U 0x08 + +/* + * Global control regs we need to care about: + * Global Control def. + * Register name addr val. */ +#define GCR_SOFTWARE_RESET 0x02 /* 0x00 */ +#define GCR_LOGICAL_DEV_NO 0x07 /* 0x00 */ +#define GCR_CHIP_ID_HI 0x20 /* 0x04 */ +#define GCR_CHIP_ID_LO 0x21 /* 0x08 */ +#define GCR_VENDOR_ID_HI 0x23 /* 0x19 */ +#define GCR_VENDOR_ID_LO 0x24 /* 0x34 */ +#define GCR_CONFIG_PORT_SEL 0x25 /* 0x01 */ +#define GCR_KBMOUSE_WAKEUP 0x27 + +#define LOGICAL_DEV_DISABLE 0x00 +#define LOGICAL_DEV_ENABLE 0x01 + +/* Logical device number of the CIR function */ +#define LOGICAL_DEV_CIR 0x05 + +/* CIR Logical Device (LDN 0x08) config registers */ +#define CIR_CR_COMMAND_INDEX 0x04 +#define CIR_CR_IRCS 0x05 /* Before host writes command to IR, host + must set to 1. When host finshes write + command to IR, host must clear to 0. */ +#define CIR_CR_COMMAND_DATA 0x06 /* Host read or write comand data */ +#define CIR_CR_CLASS 0x07 /* 0xff = rx-only, 0x66 = rx + 2 tx, + 0x33 = rx + 1 tx */ +#define CIR_CR_DEV_EN 0x30 /* bit0 = 1 enables CIR */ +#define CIR_CR_BASE_ADDR_HI 0x60 /* MSB of CIR IO base addr */ +#define CIR_CR_BASE_ADDR_LO 0x61 /* LSB of CIR IO base addr */ +#define CIR_CR_IRQ_SEL 0x70 /* bits3-0 store CIR IRQ */ +#define CIR_CR_PSOUT_STATUS 0xf1 +#define CIR_CR_WAKE_KEY3_ADDR 0xf8 +#define CIR_CR_WAKE_KEY3_CODE 0xf9 +#define CIR_CR_WAKE_KEY3_DC 0xfa +#define CIR_CR_WAKE_CONTROL 0xfb +#define CIR_CR_WAKE_KEY12_ADDR 0xfc +#define CIR_CR_WAKE_KEY4_ADDR 0xfd +#define CIR_CR_WAKE_KEY5_ADDR 0xfe + +#define CLASS_RX_ONLY 0xff +#define CLASS_RX_2TX 0x66 +#define CLASS_RX_1TX 0x33 + +/* CIR device registers */ +#define CIR_STATUS 0x00 +#define CIR_RX_DATA 0x01 +#define CIR_TX_CONTROL 0x02 +#define CIR_TX_DATA 0x03 +#define CIR_CONTROL 0x04 + +/* Bits to enable CIR wake */ +#define LOGICAL_DEV_ACPI 0x01 +#define LDEV_ACPI_WAKE_EN_REG 0xe8 +#define ACPI_WAKE_EN_CIR_BIT 0x04 + +#define LDEV_ACPI_PME_EN_REG 0xf0 +#define LDEV_ACPI_PME_CLR_REG 0xf1 +#define ACPI_PME_CIR_BIT 0x02 + +#define LDEV_ACPI_STATE_REG 0xf4 +#define ACPI_STATE_CIR_BIT 0x20 + +/* + * CIR status register (0x00): + * 7 - CIR_IRQ_EN (1 = enable CIR IRQ, 0 = disable) + * 3 - TX_FINISH (1 when TX finished, write 1 to clear) + * 2 - TX_UNDERRUN (1 on TX underrun, write 1 to clear) + * 1 - RX_TIMEOUT (1 on RX timeout, write 1 to clear) + * 0 - RX_RECEIVE (1 on RX receive, write 1 to clear) + */ +#define CIR_STATUS_IRQ_EN 0x80 +#define CIR_STATUS_TX_FINISH 0x08 +#define CIR_STATUS_TX_UNDERRUN 0x04 +#define CIR_STATUS_RX_TIMEOUT 0x02 +#define CIR_STATUS_RX_RECEIVE 0x01 +#define CIR_STATUS_IRQ_MASK 0x0f + +/* + * CIR TX control register (0x02): + * 7 - TX_START (1 to indicate TX start, auto-cleared when done) + * 6 - TX_END (1 to indicate TX data written to TX fifo) + */ +#define CIR_TX_CONTROL_TX_START 0x80 +#define CIR_TX_CONTROL_TX_END 0x40 + |