diff options
Diffstat (limited to 'drivers/media/rc/rc-main.c')
-rw-r--r-- | drivers/media/rc/rc-main.c | 253 |
1 files changed, 224 insertions, 29 deletions
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 02e2f38c9c8..99697aae92f 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1,6 +1,6 @@ /* rc-main.c - Remote Controller core module * - * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * Copyright (C) 2009-2010 by Mauro Carvalho Chehab * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,7 +24,7 @@ /* Bitmap to store allocated device numbers from 0 to IRRCV_NUM_DEVICES - 1 */ #define IRRCV_NUM_DEVICES 256 -DECLARE_BITMAP(ir_core_dev_number, IRRCV_NUM_DEVICES); +static DECLARE_BITMAP(ir_core_dev_number, IRRCV_NUM_DEVICES); /* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */ #define IR_TAB_MIN_SIZE 256 @@ -62,7 +62,7 @@ struct rc_map *rc_map_get(const char *name) map = seek_rc_map(name); #ifdef MODULE if (!map) { - int rc = request_module(name); + int rc = request_module("%s", name); if (rc < 0) { printk(KERN_ERR "Couldn't load IR keymap %s\n", name); return NULL; @@ -633,6 +633,7 @@ EXPORT_SYMBOL_GPL(rc_repeat); static void ir_do_keydown(struct rc_dev *dev, int scancode, u32 keycode, u8 toggle) { + struct rc_scancode_filter *filter; bool new_event = !dev->keypressed || dev->last_scancode != scancode || dev->last_toggle != toggle; @@ -640,6 +641,11 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode, if (new_event && dev->keypressed) ir_do_keyup(dev, false); + /* Generic scancode filtering */ + filter = &dev->scancode_filters[RC_FILTER_NORMAL]; + if (filter->mask && ((scancode ^ filter->data) & filter->mask)) + return; + input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode); if (new_event && keycode != KEY_RESERVED) { @@ -653,9 +659,10 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode, "key 0x%04x, scancode 0x%04x\n", dev->input_name, keycode, scancode); input_report_key(dev->input_dev, keycode, 1); + + led_trigger_event(led_feedback, LED_FULL); } - led_trigger_event(led_feedback, LED_FULL); input_sync(dev->input_dev); } @@ -790,18 +797,44 @@ static struct { RC_BIT_SONY20, "sony" }, { RC_BIT_RC5_SZ, "rc-5-sz" }, { RC_BIT_SANYO, "sanyo" }, + { RC_BIT_SHARP, "sharp" }, { RC_BIT_MCE_KBD, "mce_kbd" }, { RC_BIT_LIRC, "lirc" }, }; /** - * show_protocols() - shows the current IR protocol(s) + * struct rc_filter_attribute - Device attribute relating to a filter type. + * @attr: Device attribute. + * @type: Filter type. + * @mask: false for filter value, true for filter mask. + */ +struct rc_filter_attribute { + struct device_attribute attr; + enum rc_filter_type type; + bool mask; +}; +#define to_rc_filter_attr(a) container_of(a, struct rc_filter_attribute, attr) + +#define RC_PROTO_ATTR(_name, _mode, _show, _store, _type) \ + struct rc_filter_attribute dev_attr_##_name = { \ + .attr = __ATTR(_name, _mode, _show, _store), \ + .type = (_type), \ + } +#define RC_FILTER_ATTR(_name, _mode, _show, _store, _type, _mask) \ + struct rc_filter_attribute dev_attr_##_name = { \ + .attr = __ATTR(_name, _mode, _show, _store), \ + .type = (_type), \ + .mask = (_mask), \ + } + +/** + * show_protocols() - shows the current/wakeup IR protocol(s) * @device: the device descriptor * @mattr: the device attribute struct (unused) * @buf: a pointer to the output buffer * * This routine is a callback routine for input read the IR protocol type(s). - * it is trigged by reading /sys/class/rc/rc?/protocols. + * it is trigged by reading /sys/class/rc/rc?/[wakeup_]protocols. * It returns the protocol names of supported protocols. * Enabled protocols are printed in brackets. * @@ -812,6 +845,7 @@ static ssize_t show_protocols(struct device *device, struct device_attribute *mattr, char *buf) { struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr); u64 allowed, enabled; char *tmp = buf; int i; @@ -822,9 +856,10 @@ static ssize_t show_protocols(struct device *device, mutex_lock(&dev->lock); - enabled = dev->enabled_protocols; - if (dev->driver_type == RC_DRIVER_SCANCODE) - allowed = dev->allowed_protos; + enabled = dev->enabled_protocols[fattr->type]; + if (dev->driver_type == RC_DRIVER_SCANCODE || + fattr->type == RC_FILTER_WAKEUP) + allowed = dev->allowed_protocols[fattr->type]; else if (dev->raw) allowed = ir_raw_get_allowed_protocols(); else { @@ -856,14 +891,14 @@ static ssize_t show_protocols(struct device *device, } /** - * store_protocols() - changes the current IR protocol(s) + * store_protocols() - changes the current/wakeup IR protocol(s) * @device: the device descriptor * @mattr: the device attribute struct (unused) * @buf: a pointer to the input buffer * @len: length of the input buffer * * This routine is for changing the IR protocol type. - * It is trigged by writing to /sys/class/rc/rc?/protocols. + * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]protocols. * Writing "+proto" will add a protocol to the list of enabled protocols. * Writing "-proto" will remove a protocol from the list of enabled protocols. * Writing "proto" will enable only "proto". @@ -880,12 +915,15 @@ static ssize_t store_protocols(struct device *device, size_t len) { struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr); bool enable, disable; const char *tmp; - u64 type; + u64 old_type, type; u64 mask; int rc, i, count = 0; ssize_t ret; + int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); + struct rc_scancode_filter local_filter, *filter; /* Device is being removed */ if (!dev) @@ -898,7 +936,8 @@ static ssize_t store_protocols(struct device *device, ret = -EINVAL; goto out; } - type = dev->enabled_protocols; + old_type = dev->enabled_protocols[fattr->type]; + type = old_type; while ((tmp = strsep((char **) &data, " \n")) != NULL) { if (!*tmp) @@ -946,8 +985,10 @@ static ssize_t store_protocols(struct device *device, goto out; } - if (dev->change_protocol) { - rc = dev->change_protocol(dev, &type); + change_protocol = (fattr->type == RC_FILTER_NORMAL) + ? dev->change_protocol : dev->change_wakeup_protocol; + if (change_protocol) { + rc = change_protocol(dev, &type); if (rc < 0) { IR_dprintk(1, "Error setting protocols to 0x%llx\n", (long long)type); @@ -956,10 +997,40 @@ static ssize_t store_protocols(struct device *device, } } - dev->enabled_protocols = type; + dev->enabled_protocols[fattr->type] = type; IR_dprintk(1, "Current protocol(s): 0x%llx\n", (long long)type); + /* + * If the protocol is changed the filter needs updating. + * Try setting the same filter with the new protocol (if any). + * Fall back to clearing the filter. + */ + filter = &dev->scancode_filters[fattr->type]; + if (old_type != type && filter->mask) { + local_filter = *filter; + if (!type) { + /* no protocol => clear filter */ + ret = -1; + } else if (!dev->s_filter) { + /* generic filtering => accept any filter */ + ret = 0; + } else { + /* hardware filtering => try setting, otherwise clear */ + ret = dev->s_filter(dev, fattr->type, &local_filter); + } + if (ret < 0) { + /* clear the filter */ + local_filter.data = 0; + local_filter.mask = 0; + if (dev->s_filter) + dev->s_filter(dev, fattr->type, &local_filter); + } + + /* commit the new filter */ + *filter = local_filter; + } + ret = len; out: @@ -967,6 +1038,115 @@ out: return ret; } +/** + * show_filter() - shows the current scancode filter value or mask + * @device: the device descriptor + * @attr: the device attribute struct + * @buf: a pointer to the output buffer + * + * This routine is a callback routine to read a scancode filter value or mask. + * It is trigged by reading /sys/class/rc/rc?/[wakeup_]filter[_mask]. + * It prints the current scancode filter value or mask of the appropriate filter + * type in hexadecimal into @buf and returns the size of the buffer. + * + * Bits of the filter value corresponding to set bits in the filter mask are + * compared against input scancodes and non-matching scancodes are discarded. + * + * dev->lock is taken to guard against races between device registration, + * store_filter and show_filter. + */ +static ssize_t show_filter(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(attr); + u32 val; + + /* Device is being removed */ + if (!dev) + return -EINVAL; + + mutex_lock(&dev->lock); + if (fattr->mask) + val = dev->scancode_filters[fattr->type].mask; + else + val = dev->scancode_filters[fattr->type].data; + mutex_unlock(&dev->lock); + + return sprintf(buf, "%#x\n", val); +} + +/** + * store_filter() - changes the scancode filter value + * @device: the device descriptor + * @attr: the device attribute struct + * @buf: a pointer to the input buffer + * @len: length of the input buffer + * + * This routine is for changing a scancode filter value or mask. + * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]filter[_mask]. + * Returns -EINVAL if an invalid filter value for the current protocol was + * specified or if scancode filtering is not supported by the driver, otherwise + * returns @len. + * + * Bits of the filter value corresponding to set bits in the filter mask are + * compared against input scancodes and non-matching scancodes are discarded. + * + * dev->lock is taken to guard against races between device registration, + * store_filter and show_filter. + */ +static ssize_t store_filter(struct device *device, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct rc_dev *dev = to_rc_dev(device); + struct rc_filter_attribute *fattr = to_rc_filter_attr(attr); + struct rc_scancode_filter local_filter, *filter; + int ret; + unsigned long val; + + /* Device is being removed */ + if (!dev) + return -EINVAL; + + ret = kstrtoul(buf, 0, &val); + if (ret < 0) + return ret; + + /* Scancode filter not supported (but still accept 0) */ + if (!dev->s_filter && fattr->type != RC_FILTER_NORMAL) + return val ? -EINVAL : count; + + mutex_lock(&dev->lock); + + /* Tell the driver about the new filter */ + filter = &dev->scancode_filters[fattr->type]; + local_filter = *filter; + if (fattr->mask) + local_filter.mask = val; + else + local_filter.data = val; + if (!dev->enabled_protocols[fattr->type] && local_filter.mask) { + /* refuse to set a filter unless a protocol is enabled */ + ret = -EINVAL; + goto unlock; + } + if (dev->s_filter) { + ret = dev->s_filter(dev, fattr->type, &local_filter); + if (ret < 0) + goto unlock; + } + + /* Success, commit the new filter */ + *filter = local_filter; + +unlock: + mutex_unlock(&dev->lock); + return (ret < 0) ? ret : count; +} + static void rc_dev_release(struct device *device) { } @@ -996,11 +1176,26 @@ static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env) /* * Static device attribute struct with the sysfs attributes for IR's */ -static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR, - show_protocols, store_protocols); +static RC_PROTO_ATTR(protocols, S_IRUGO | S_IWUSR, + show_protocols, store_protocols, RC_FILTER_NORMAL); +static RC_PROTO_ATTR(wakeup_protocols, S_IRUGO | S_IWUSR, + show_protocols, store_protocols, RC_FILTER_WAKEUP); +static RC_FILTER_ATTR(filter, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_NORMAL, false); +static RC_FILTER_ATTR(filter_mask, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_NORMAL, true); +static RC_FILTER_ATTR(wakeup_filter, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_WAKEUP, false); +static RC_FILTER_ATTR(wakeup_filter_mask, S_IRUGO|S_IWUSR, + show_filter, store_filter, RC_FILTER_WAKEUP, true); static struct attribute *rc_dev_attrs[] = { - &dev_attr_protocols.attr, + &dev_attr_protocols.attr.attr, + &dev_attr_wakeup_protocols.attr.attr, + &dev_attr_filter.attr.attr, + &dev_attr_filter_mask.attr.attr, + &dev_attr_wakeup_filter.attr.attr, + &dev_attr_wakeup_filter_mask.attr.attr, NULL, }; @@ -1091,14 +1286,6 @@ int rc_register_device(struct rc_dev *dev) if (dev->close) dev->input_dev->close = ir_close; - /* - * Take the lock here, as the device sysfs node will appear - * when device_add() is called, which may trigger an ir-keytable udev - * rule, which will in turn call show_protocols and access - * dev->enabled_protocols before it has been initialized. - */ - mutex_lock(&dev->lock); - do { devno = find_first_zero_bit(ir_core_dev_number, IRRCV_NUM_DEVICES); @@ -1107,6 +1294,14 @@ int rc_register_device(struct rc_dev *dev) return -ENOMEM; } while (test_and_set_bit(devno, ir_core_dev_number)); + /* + * Take the lock here, as the device sysfs node will appear + * when device_add() is called, which may trigger an ir-keytable udev + * rule, which will in turn call show_protocols and access + * dev->enabled_protocols before it has been initialized. + */ + mutex_lock(&dev->lock); + dev->devno = devno; dev_set_name(&dev->dev, "rc%ld", dev->devno); dev_set_drvdata(&dev->dev, dev); @@ -1172,7 +1367,7 @@ int rc_register_device(struct rc_dev *dev) rc = dev->change_protocol(dev, &rc_type); if (rc < 0) goto out_raw; - dev->enabled_protocols = rc_type; + dev->enabled_protocols[RC_FILTER_NORMAL] = rc_type; } mutex_unlock(&dev->lock); @@ -1260,5 +1455,5 @@ int rc_core_debug; /* ir_debug level (0,1,2) */ EXPORT_SYMBOL_GPL(rc_core_debug); module_param_named(debug, rc_core_debug, int, 0644); -MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); |