diff options
Diffstat (limited to 'drivers/media/rc/redrat3.c')
| -rw-r--r-- | drivers/media/rc/redrat3.c | 1344 |
1 files changed, 1344 insertions, 0 deletions
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c new file mode 100644 index 00000000000..5147767ccb7 --- /dev/null +++ b/drivers/media/rc/redrat3.c @@ -0,0 +1,1344 @@ +/* + * USB RedRat3 IR Transceiver rc-core driver + * + * Copyright (c) 2011 by Jarod Wilson <jarod@redhat.com> + * based heavily on the work of Stephen Cox, with additional + * help from RedRat Ltd. + * + * This driver began life based an an old version of the first-generation + * lirc_mceusb driver from the lirc 0.7.2 distribution. It was then + * significantly rewritten by Stephen Cox with the aid of RedRat Ltd's + * Chris Dodge. + * + * The driver was then ported to rc-core and significantly rewritten again, + * by Jarod, using the in-kernel mceusb driver as a guide, after an initial + * port effort was started by Stephen. + * + * TODO LIST: + * - fix lirc not showing repeats properly + * -- + * + * The RedRat3 is a USB transceiver with both send & receive, + * with 2 separate sensors available for receive to enable + * both good long range reception for general use, and good + * short range reception when required for learning a signal. + * + * http://www.redrat.co.uk/ + * + * It uses its own little protocol to communicate, the required + * parts of which are embedded within this driver. + * -- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/input.h> +#include <media/rc-core.h> + +/* Driver Information */ +#define DRIVER_VERSION "0.70" +#define DRIVER_AUTHOR "Jarod Wilson <jarod@redhat.com>" +#define DRIVER_AUTHOR2 "The Dweller, Stephen Cox" +#define DRIVER_DESC "RedRat3 USB IR Transceiver Driver" +#define DRIVER_NAME "redrat3" + +/* module parameters */ +#ifdef CONFIG_USB_DEBUG +static int debug = 1; +#else +static int debug; +#endif + +#define RR3_DEBUG_STANDARD 0x1 +#define RR3_DEBUG_FUNCTION_TRACE 0x2 + +#define rr3_dbg(dev, fmt, ...) \ + do { \ + if (debug & RR3_DEBUG_STANDARD) \ + dev_info(dev, fmt, ## __VA_ARGS__); \ + } while (0) + +#define rr3_ftr(dev, fmt, ...) \ + do { \ + if (debug & RR3_DEBUG_FUNCTION_TRACE) \ + dev_info(dev, fmt, ## __VA_ARGS__); \ + } while (0) + +/* bulk data transfer types */ +#define RR3_ERROR 0x01 +#define RR3_MOD_SIGNAL_IN 0x20 +#define RR3_MOD_SIGNAL_OUT 0x21 + +/* Get the RR firmware version */ +#define RR3_FW_VERSION 0xb1 +#define RR3_FW_VERSION_LEN 64 +/* Send encoded signal bulk-sent earlier*/ +#define RR3_TX_SEND_SIGNAL 0xb3 +#define RR3_SET_IR_PARAM 0xb7 +#define RR3_GET_IR_PARAM 0xb8 +/* Blink the red LED on the device */ +#define RR3_BLINK_LED 0xb9 +/* Read serial number of device */ +#define RR3_READ_SER_NO 0xba +#define RR3_SER_NO_LEN 4 +/* Start capture with the RC receiver */ +#define RR3_RC_DET_ENABLE 0xbb +/* Stop capture with the RC receiver */ +#define RR3_RC_DET_DISABLE 0xbc +/* Return the status of RC detector capture */ +#define RR3_RC_DET_STATUS 0xbd +/* Reset redrat */ +#define RR3_RESET 0xa0 + +/* Max number of lengths in the signal. */ +#define RR3_IR_IO_MAX_LENGTHS 0x01 +/* Periods to measure mod. freq. */ +#define RR3_IR_IO_PERIODS_MF 0x02 +/* Size of memory for main signal data */ +#define RR3_IR_IO_SIG_MEM_SIZE 0x03 +/* Delta value when measuring lengths */ +#define RR3_IR_IO_LENGTH_FUZZ 0x04 +/* Timeout for end of signal detection */ +#define RR3_IR_IO_SIG_TIMEOUT 0x05 +/* Minumum value for pause recognition. */ +#define RR3_IR_IO_MIN_PAUSE 0x06 + +/* Clock freq. of EZ-USB chip */ +#define RR3_CLK 24000000 +/* Clock periods per timer count */ +#define RR3_CLK_PER_COUNT 12 +/* (RR3_CLK / RR3_CLK_PER_COUNT) */ +#define RR3_CLK_CONV_FACTOR 2000000 +/* USB bulk-in IR data endpoint address */ +#define RR3_BULK_IN_EP_ADDR 0x82 + +/* Raw Modulated signal data value offsets */ +#define RR3_PAUSE_OFFSET 0 +#define RR3_FREQ_COUNT_OFFSET 4 +#define RR3_NUM_PERIOD_OFFSET 6 +#define RR3_MAX_LENGTHS_OFFSET 8 +#define RR3_NUM_LENGTHS_OFFSET 9 +#define RR3_MAX_SIGS_OFFSET 10 +#define RR3_NUM_SIGS_OFFSET 12 +#define RR3_REPEATS_OFFSET 14 + +/* Size of the fixed-length portion of the signal */ +#define RR3_HEADER_LENGTH 15 +#define RR3_DRIVER_MAXLENS 128 +#define RR3_MAX_SIG_SIZE 512 +#define RR3_MAX_BUF_SIZE \ + ((2 * RR3_HEADER_LENGTH) + RR3_DRIVER_MAXLENS + RR3_MAX_SIG_SIZE) +#define RR3_TIME_UNIT 50 +#define RR3_END_OF_SIGNAL 0x7f +#define RR3_TX_HEADER_OFFSET 4 +#define RR3_TX_TRAILER_LEN 2 +#define RR3_RX_MIN_TIMEOUT 5 +#define RR3_RX_MAX_TIMEOUT 2000 + +/* The 8051's CPUCS Register address */ +#define RR3_CPUCS_REG_ADDR 0x7f92 + +#define USB_RR3USB_VENDOR_ID 0x112a +#define USB_RR3USB_PRODUCT_ID 0x0001 +#define USB_RR3IIUSB_PRODUCT_ID 0x0005 + +/* table of devices that work with this driver */ +static struct usb_device_id redrat3_dev_table[] = { + /* Original version of the RedRat3 */ + {USB_DEVICE(USB_RR3USB_VENDOR_ID, USB_RR3USB_PRODUCT_ID)}, + /* Second Version/release of the RedRat3 - RetRat3-II */ + {USB_DEVICE(USB_RR3USB_VENDOR_ID, USB_RR3IIUSB_PRODUCT_ID)}, + {} /* Terminating entry */ +}; + +/* Structure to hold all of our device specific stuff */ +struct redrat3_dev { + /* core device bits */ + struct rc_dev *rc; + struct device *dev; + + /* save off the usb device pointer */ + struct usb_device *udev; + + /* the receive endpoint */ + struct usb_endpoint_descriptor *ep_in; + /* the buffer to receive data */ + unsigned char *bulk_in_buf; + /* urb used to read ir data */ + struct urb *read_urb; + + /* the send endpoint */ + struct usb_endpoint_descriptor *ep_out; + /* the buffer to send data */ + unsigned char *bulk_out_buf; + /* the urb used to send data */ + struct urb *write_urb; + + /* usb dma */ + dma_addr_t dma_in; + dma_addr_t dma_out; + + /* true if write urb is busy */ + bool write_busy; + /* wait for the write to finish */ + struct completion write_finished; + + /* locks this structure */ + struct mutex lock; + + /* rx signal timeout timer */ + struct timer_list rx_timeout; + + /* Is the device currently receiving? */ + bool recv_in_progress; + /* is the detector enabled*/ + bool det_enabled; + /* Is the device currently transmitting?*/ + bool transmitting; + + /* store for current packet */ + char pbuf[RR3_MAX_BUF_SIZE]; + u16 pktlen; + u16 pkttype; + u16 bytes_read; + /* indicate whether we are going to reprocess + * the USB callback with a bigger buffer */ + int buftoosmall; + char *datap; + + u32 carrier; + + char name[128]; + char phys[64]; +}; + +/* All incoming data buffers adhere to a very specific data format */ +struct redrat3_signal_header { + u16 length; /* Length of data being transferred */ + u16 transfer_type; /* Type of data transferred */ + u32 pause; /* Pause between main and repeat signals */ + u16 mod_freq_count; /* Value of timer on mod. freq. measurement */ + u16 no_periods; /* No. of periods over which mod. freq. is measured */ + u8 max_lengths; /* Max no. of lengths (i.e. size of array) */ + u8 no_lengths; /* Actual no. of elements in lengths array */ + u16 max_sig_size; /* Max no. of values in signal data array */ + u16 sig_size; /* Acuto no. of values in signal data array */ + u8 no_repeats; /* No. of repeats of repeat signal section */ + /* Here forward is the lengths and signal data */ +}; + +static void redrat3_dump_signal_header(struct redrat3_signal_header *header) +{ + pr_info("%s:\n", __func__); + pr_info(" * length: %u, transfer_type: 0x%02x\n", + header->length, header->transfer_type); + pr_info(" * pause: %u, freq_count: %u, no_periods: %u\n", + header->pause, header->mod_freq_count, header->no_periods); + pr_info(" * lengths: %u (max: %u)\n", + header->no_lengths, header->max_lengths); + pr_info(" * sig_size: %u (max: %u)\n", + header->sig_size, header->max_sig_size); + pr_info(" * repeats: %u\n", header->no_repeats); +} + +static void redrat3_dump_signal_data(char *buffer, u16 len) +{ + int offset, i; + char *data_vals; + + pr_info("%s:", __func__); + + offset = RR3_TX_HEADER_OFFSET + RR3_HEADER_LENGTH + + (RR3_DRIVER_MAXLENS * sizeof(u16)); + + /* read RR3_DRIVER_MAXLENS from ctrl msg */ + data_vals = buffer + offset; + + for (i = 0; i < len; i++) { + if (i % 10 == 0) + pr_cont("\n * "); + pr_cont("%02x ", *data_vals++); + } + + pr_cont("\n"); +} + +/* + * redrat3_issue_async + * + * Issues an async read to the ir data in port.. + * sets the callback to be redrat3_handle_async + */ +static void redrat3_issue_async(struct redrat3_dev *rr3) +{ + int res; + + rr3_ftr(rr3->dev, "Entering %s\n", __func__); + + if (!rr3->det_enabled) { + dev_warn(rr3->dev, "not issuing async read, " + "detector not enabled\n"); + return; + } + + memset(rr3->bulk_in_buf, 0, rr3->ep_in->wMaxPacketSize); + res = usb_submit_urb(rr3->read_urb, GFP_ATOMIC); + if (res) + rr3_dbg(rr3->dev, "%s: receive request FAILED! " + "(res %d, len %d)\n", __func__, res, + rr3->read_urb->transfer_buffer_length); +} + +static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code) +{ + if (!rr3->transmitting && (code != 0x40)) + dev_info(rr3->dev, "fw error code 0x%02x: ", code); + + switch (code) { + case 0x00: + pr_cont("No Error\n"); + break; + + /* Codes 0x20 through 0x2f are IR Firmware Errors */ + case 0x20: + pr_cont("Initial signal pulse not long enough " + "to measure carrier frequency\n"); + break; + case 0x21: + pr_cont("Not enough length values allocated for signal\n"); + break; + case 0x22: + pr_cont("Not enough memory allocated for signal data\n"); + break; + case 0x23: + pr_cont("Too many signal repeats\n"); + break; + case 0x28: + pr_cont("Insufficient memory available for IR signal " + "data memory allocation\n"); + break; + case 0x29: + pr_cont("Insufficient memory available " + "for IrDa signal data memory allocation\n"); + break; + + /* Codes 0x30 through 0x3f are USB Firmware Errors */ + case 0x30: + pr_cont("Insufficient memory available for bulk " + "transfer structure\n"); + break; + + /* + * Other error codes... These are primarily errors that can occur in + * the control messages sent to the redrat + */ + case 0x40: + if (!rr3->transmitting) + pr_cont("Signal capture has been terminated\n"); + break; + case 0x41: + pr_cont("Attempt to set/get and unknown signal I/O " + "algorithm parameter\n"); + break; + case 0x42: + pr_cont("Signal capture already started\n"); + break; + + default: + pr_cont("Unknown Error\n"); + break; + } +} + +static u32 redrat3_val_to_mod_freq(struct redrat3_signal_header *ph) +{ + u32 mod_freq = 0; + + if (ph->mod_freq_count != 0) + mod_freq = (RR3_CLK * ph->no_periods) / + (ph->mod_freq_count * RR3_CLK_PER_COUNT); + + return mod_freq; +} + +/* this function scales down the figures for the same result... */ +static u32 redrat3_len_to_us(u32 length) +{ + u32 biglen = length * 1000; + u32 divisor = (RR3_CLK_CONV_FACTOR) / 1000; + u32 result = (u32) (biglen / divisor); + + /* don't allow zero lengths to go back, breaks lirc */ + return result ? result : 1; +} + +/* + * convert us back into redrat3 lengths + * + * length * 1000 length * 1000000 + * ------------- = ---------------- = micro + * rr3clk / 1000 rr3clk + + * 6 * 2 4 * 3 micro * rr3clk micro * rr3clk / 1000 + * ----- = 4 ----- = 6 -------------- = len --------------------- + * 3 2 1000000 1000 + */ +static u32 redrat3_us_to_len(u32 microsec) +{ + u32 result; + u32 divisor; + + microsec &= IR_MAX_DURATION; + divisor = (RR3_CLK_CONV_FACTOR / 1000); + result = (u32)(microsec * divisor) / 1000; + + /* don't allow zero lengths to go back, breaks lirc */ + return result ? result : 1; + +} + +/* timer callback to send long trailing space on receive timeout */ +static void redrat3_rx_timeout(unsigned long data) +{ + struct redrat3_dev *rr3 = (struct redrat3_dev *)data; + DEFINE_IR_RAW_EVENT(rawir); + + rawir.pulse = false; + rawir.duration = rr3->rc->timeout; + rr3_dbg(rr3->dev, "storing trailing space with duration %d\n", + rawir.duration); + ir_raw_event_store_with_filter(rr3->rc, &rawir); + + rr3_dbg(rr3->dev, "calling ir_raw_event_handle\n"); + ir_raw_event_handle(rr3->rc); + + rr3_dbg(rr3->dev, "calling ir_raw_event_reset\n"); + ir_raw_event_reset(rr3->rc); +} + +static void redrat3_process_ir_data(struct redrat3_dev *rr3) +{ + DEFINE_IR_RAW_EVENT(rawir); + struct redrat3_signal_header header; + struct device *dev; + int i; + unsigned long delay; + u32 mod_freq, single_len; + u16 *len_vals; + u8 *data_vals; + u32 tmp32; + u16 tmp16; + char *sig_data; + + if (!rr3) { + pr_err("%s called with no context!\n", __func__); + return; + } + + rr3_ftr(rr3->dev, "Entered %s\n", __func__); + + dev = rr3->dev; + sig_data = rr3->pbuf; + + header.length = rr3->pktlen; + header.transfer_type = rr3->pkttype; + + /* Sanity check */ + if (!(header.length >= RR3_HEADER_LENGTH)) + dev_warn(dev, "read returned less than rr3 header len\n"); + + delay = usecs_to_jiffies(rr3->rc->timeout / 1000); + mod_timer(&rr3->rx_timeout, jiffies + delay); + + memcpy(&tmp32, sig_data + RR3_PAUSE_OFFSET, sizeof(tmp32)); + header.pause = be32_to_cpu(tmp32); + + memcpy(&tmp16, sig_data + RR3_FREQ_COUNT_OFFSET, sizeof(tmp16)); + header.mod_freq_count = be16_to_cpu(tmp16); + + memcpy(&tmp16, sig_data + RR3_NUM_PERIOD_OFFSET, sizeof(tmp16)); + header.no_periods = be16_to_cpu(tmp16); + + header.max_lengths = sig_data[RR3_MAX_LENGTHS_OFFSET]; + header.no_lengths = sig_data[RR3_NUM_LENGTHS_OFFSET]; + + memcpy(&tmp16, sig_data + RR3_MAX_SIGS_OFFSET, sizeof(tmp16)); + header.max_sig_size = be16_to_cpu(tmp16); + + memcpy(&tmp16, sig_data + RR3_NUM_SIGS_OFFSET, sizeof(tmp16)); + header.sig_size = be16_to_cpu(tmp16); + + header.no_repeats= sig_data[RR3_REPEATS_OFFSET]; + + if (debug) { + redrat3_dump_signal_header(&header); + redrat3_dump_signal_data(sig_data, header.sig_size); + } + + mod_freq = redrat3_val_to_mod_freq(&header); + rr3_dbg(dev, "Got mod_freq of %u\n", mod_freq); + + /* Here we pull out the 'length' values from the signal */ + len_vals = (u16 *)(sig_data + RR3_HEADER_LENGTH); + + data_vals = sig_data + RR3_HEADER_LENGTH + + (header.max_lengths * sizeof(u16)); + + /* process each rr3 encoded byte into an int */ + for (i = 0; i < header.sig_size; i++) { + u16 val = len_vals[data_vals[i]]; + single_len = redrat3_len_to_us((u32)be16_to_cpu(val)); + + /* cap the value to IR_MAX_DURATION */ + single_len &= IR_MAX_DURATION; + + /* we should always get pulse/space/pulse/space samples */ + if (i % 2) + rawir.pulse = false; + else + rawir.pulse = true; + + rawir.duration = US_TO_NS(single_len); + rr3_dbg(dev, "storing %s with duration %d (i: %d)\n", + rawir.pulse ? "pulse" : "space", rawir.duration, i); + ir_raw_event_store_with_filter(rr3->rc, &rawir); + } + + /* add a trailing space, if need be */ + if (i % 2) { + rawir.pulse = false; + /* this duration is made up, and may not be ideal... */ + rawir.duration = rr3->rc->timeout / 2; + rr3_dbg(dev, "storing trailing space with duration %d\n", + rawir.duration); + ir_raw_event_store_with_filter(rr3->rc, &rawir); + } + + rr3_dbg(dev, "calling ir_raw_event_handle\n"); + ir_raw_event_handle(rr3->rc); + + return; +} + +/* Util fn to send rr3 cmds */ +static u8 redrat3_send_cmd(int cmd, struct redrat3_dev *rr3) +{ + struct usb_device *udev; + u8 *data; + int res; + + data = kzalloc(sizeof(u8), GFP_KERNEL); + if (!data) + return -ENOMEM; + + udev = rr3->udev; + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x0000, 0x0000, data, sizeof(u8), HZ * 10); + + if (res < 0) { + dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d", + __func__, res, *data); + res = -EIO; + } else + res = (u8)data[0]; + + kfree(data); + + return res; +} + +/* Enables the long range detector and starts async receive */ +static int redrat3_enable_detector(struct redrat3_dev *rr3) +{ + struct device *dev = rr3->dev; + u8 ret; + + rr3_ftr(dev, "Entering %s\n", __func__); + + ret = redrat3_send_cmd(RR3_RC_DET_ENABLE, rr3); + if (ret != 0) + dev_dbg(dev, "%s: unexpected ret of %d\n", + __func__, ret); + + ret = redrat3_send_cmd(RR3_RC_DET_STATUS, rr3); + if (ret != 1) { + dev_err(dev, "%s: detector status: %d, should be 1\n", + __func__, ret); + return -EIO; + } + + rr3->det_enabled = true; + redrat3_issue_async(rr3); + + return 0; +} + +/* Disables the rr3 long range detector */ +static void redrat3_disable_detector(struct redrat3_dev *rr3) +{ + struct device *dev = rr3->dev; + u8 ret; + + rr3_ftr(dev, "Entering %s\n", __func__); + + ret = redrat3_send_cmd(RR3_RC_DET_DISABLE, rr3); + if (ret != 0) + dev_err(dev, "%s: failure!\n", __func__); + + ret = redrat3_send_cmd(RR3_RC_DET_STATUS, rr3); + if (ret != 0) + dev_warn(dev, "%s: detector status: %d, should be 0\n", + __func__, ret); + + rr3->det_enabled = false; +} + +static inline void redrat3_delete(struct redrat3_dev *rr3, + struct usb_device *udev) +{ + rr3_ftr(rr3->dev, "%s cleaning up\n", __func__); + usb_kill_urb(rr3->read_urb); + usb_kill_urb(rr3->write_urb); + + usb_free_urb(rr3->read_urb); + usb_free_urb(rr3->write_urb); + + usb_free_coherent(udev, rr3->ep_in->wMaxPacketSize, + rr3->bulk_in_buf, rr3->dma_in); + usb_free_coherent(udev, rr3->ep_out->wMaxPacketSize, + rr3->bulk_out_buf, rr3->dma_out); + + kfree(rr3); +} + +static u32 redrat3_get_timeout(struct device *dev, + struct rc_dev *rc, struct usb_device *udev) +{ + u32 *tmp; + u32 timeout = MS_TO_NS(150); /* a sane default, if things go haywire */ + int len, ret, pipe; + + len = sizeof(*tmp); + tmp = kzalloc(len, GFP_KERNEL); + if (!tmp) { + dev_warn(dev, "Memory allocation faillure\n"); + return timeout; + } + + pipe = usb_rcvctrlpipe(udev, 0); + ret = usb_control_msg(udev, pipe, RR3_GET_IR_PARAM, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5); + if (ret != len) { + dev_warn(dev, "Failed to read timeout from hardware\n"); + return timeout; + } + + timeout = US_TO_NS(redrat3_len_to_us(be32_to_cpu(*tmp))); + if (timeout < rc->min_timeout) + timeout = rc->min_timeout; + else if (timeout > rc->max_timeout) + timeout = rc->max_timeout; + + rr3_dbg(dev, "Got timeout of %d ms\n", timeout / (1000 * 1000)); + return timeout; +} + +static void redrat3_reset(struct redrat3_dev *rr3) +{ + struct usb_device *udev = rr3->udev; + struct device *dev = rr3->dev; + int rc, rxpipe, txpipe; + u8 *val; + int len = sizeof(u8); + + rr3_ftr(dev, "Entering %s\n", __func__); + + rxpipe = usb_rcvctrlpipe(udev, 0); + txpipe = usb_sndctrlpipe(udev, 0); + + val = kzalloc(len, GFP_KERNEL); + if (!val) { + dev_err(dev, "Memory allocation failure\n"); + return; + } + + *val = 0x01; + rc = usb_control_msg(udev, rxpipe, RR3_RESET, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25); + rr3_dbg(dev, "reset returned 0x%02x\n", rc); + + *val = 5; + rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25); + rr3_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc); + + *val = RR3_DRIVER_MAXLENS; + rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25); + rr3_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc); + + kfree(val); +} + +static void redrat3_get_firmware_rev(struct redrat3_dev *rr3) +{ + int rc = 0; + char *buffer; + + rr3_ftr(rr3->dev, "Entering %s\n", __func__); + + buffer = kzalloc(sizeof(char) * (RR3_FW_VERSION_LEN + 1), GFP_KERNEL); + if (!buffer) { + dev_err(rr3->dev, "Memory allocation failure\n"); + return; + } + + rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0), + RR3_FW_VERSION, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5); + + if (rc >= 0) + dev_info(rr3->dev, "Firmware rev: %s", buffer); + else + dev_err(rr3->dev, "Problem fetching firmware ID\n"); + + kfree(buffer); + rr3_ftr(rr3->dev, "Exiting %s\n", __func__); +} + +static void redrat3_read_packet_start(struct redrat3_dev *rr3, int len) +{ + u16 tx_error; + u16 hdrlen; + + rr3_ftr(rr3->dev, "Entering %s\n", __func__); + + /* grab the Length and type of transfer */ + memcpy(&(rr3->pktlen), (unsigned char *) rr3->bulk_in_buf, + sizeof(rr3->pktlen)); + memcpy(&(rr3->pkttype), ((unsigned char *) rr3->bulk_in_buf + + sizeof(rr3->pktlen)), + sizeof(rr3->pkttype)); + + /*data needs conversion to know what its real values are*/ + rr3->pktlen = be16_to_cpu(rr3->pktlen); + rr3->pkttype = be16_to_cpu(rr3->pkttype); + + switch (rr3->pkttype) { + case RR3_ERROR: + memcpy(&tx_error, ((unsigned char *)rr3->bulk_in_buf + + (sizeof(rr3->pktlen) + sizeof(rr3->pkttype))), + sizeof(tx_error)); + tx_error = be16_to_cpu(tx_error); + redrat3_dump_fw_error(rr3, tx_error); + break; + + case RR3_MOD_SIGNAL_IN: + hdrlen = sizeof(rr3->pktlen) + sizeof(rr3->pkttype); + rr3->bytes_read = len; + rr3->bytes_read -= hdrlen; + rr3->datap = &(rr3->pbuf[0]); + + memcpy(rr3->datap, ((unsigned char *)rr3->bulk_in_buf + hdrlen), + rr3->bytes_read); + rr3->datap += rr3->bytes_read; + rr3_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", + rr3->bytes_read, rr3->pktlen); + break; + + default: + rr3_dbg(rr3->dev, "ignoring packet with type 0x%02x, " + "len of %d, 0x%02x\n", rr3->pkttype, len, rr3->pktlen); + break; + } +} + +static void redrat3_read_packet_continue(struct redrat3_dev *rr3, int len) +{ + + rr3_ftr(rr3->dev, "Entering %s\n", __func__); + + memcpy(rr3->datap, (unsigned char *)rr3->bulk_in_buf, len); + rr3->datap += len; + + rr3->bytes_read += len; + rr3_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", + rr3->bytes_read, rr3->pktlen); +} + +/* gather IR data from incoming urb, process it when we have enough */ +static int redrat3_get_ir_data(struct redrat3_dev *rr3, int len) +{ + struct device *dev = rr3->dev; + int ret = 0; + + rr3_ftr(dev, "Entering %s\n", __func__); + + if (rr3->pktlen > RR3_MAX_BUF_SIZE) { + dev_err(rr3->dev, "error: packet larger than buffer\n"); + ret = -EINVAL; + goto out; + } + + if ((rr3->bytes_read == 0) && + (len >= (sizeof(rr3->pkttype) + sizeof(rr3->pktlen)))) { + redrat3_read_packet_start(rr3, len); + } else if (rr3->bytes_read != 0) { + redrat3_read_packet_continue(rr3, len); + } else if (rr3->bytes_read == 0) { + dev_err(dev, "error: no packet data read\n"); + ret = -ENODATA; + goto out; + } + + if (rr3->bytes_read > rr3->pktlen) { + dev_err(dev, "bytes_read (%d) greater than pktlen (%d)\n", + rr3->bytes_read, rr3->pktlen); + ret = -EINVAL; + goto out; + } else if (rr3->bytes_read < rr3->pktlen) + /* we're still accumulating data */ + return 0; + + /* if we get here, we've got IR data to decode */ + if (rr3->pkttype == RR3_MOD_SIGNAL_IN) + redrat3_process_ir_data(rr3); + else + rr3_dbg(dev, "discarding non-signal data packet " + "(type 0x%02x)\n", rr3->pkttype); + +out: + rr3->bytes_read = 0; + rr3->pktlen = 0; + rr3->pkttype = 0; + return ret; +} + +/* callback function from USB when async USB request has completed */ +static void redrat3_handle_async(struct urb *urb, struct pt_regs *regs) +{ + struct redrat3_dev *rr3; + + if (!urb) + return; + + rr3 = urb->context; + if (!rr3) { + pr_err("%s called with invalid context!\n", __func__); + usb_unlink_urb(urb); + return; + } + + rr3_ftr(rr3->dev, "Entering %s\n", __func__); + + if (!rr3->det_enabled) { + rr3_dbg(rr3->dev, "received a read callback but detector " + "disabled - ignoring\n"); + return; + } + + switch (urb->status) { + case 0: + redrat3_get_ir_data(rr3, urb->actual_length); + break; + + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + usb_unlink_urb(urb); + return; + + case -EPIPE: + default: + dev_warn(rr3->dev, "Error: urb status = %d\n", urb->status); + rr3->bytes_read = 0; + rr3->pktlen = 0; + rr3->pkttype = 0; + break; + } + + if (!rr3->transmitting) + redrat3_issue_async(rr3); + else + rr3_dbg(rr3->dev, "IR transmit in progress\n"); +} + +static void redrat3_write_bulk_callback(struct urb *urb, struct pt_regs *regs) +{ + struct redrat3_dev *rr3; + int len; + + if (!urb) + return; + + rr3 = urb->context; + if (rr3) { + len = urb->actual_length; + rr3_ftr(rr3->dev, "%s: called (status=%d len=%d)\n", + __func__, urb->status, len); + } +} + +static u16 mod_freq_to_val(unsigned int mod_freq) +{ + int mult = 6000000; + + /* Clk used in mod. freq. generation is CLK24/4. */ + return (u16)(65536 - (mult / mod_freq)); +} + +static int redrat3_set_tx_carrier(struct rc_dev *dev, u32 carrier) +{ + struct redrat3_dev *rr3 = dev->priv; + + rr3->carrier = carrier; + + return carrier; +} + +static int redrat3_transmit_ir(struct rc_dev *rcdev, int *txbuf, u32 n) +{ + struct redrat3_dev *rr3 = rcdev->priv; + struct device *dev = rr3->dev; + struct redrat3_signal_header header; + int i, j, count, ret, ret_len, offset; + int lencheck, cur_sample_len, pipe; + char *buffer = NULL, *sigdata = NULL; + int *sample_lens = NULL; + u32 tmpi; + u16 tmps; + u8 *datap; + u8 curlencheck = 0; + u16 *lengths_ptr; + int sendbuf_len; + + rr3_ftr(dev, "Entering %s\n", __func__); + + if (rr3->transmitting) { + dev_warn(dev, "%s: transmitter already in use\n", __func__); + return -EAGAIN; + } + + count = n / sizeof(int); + if (count > (RR3_DRIVER_MAXLENS * 2)) + return -EINVAL; + + rr3->transmitting = true; + + redrat3_disable_detector(rr3); + + if (rr3->det_enabled) { + dev_err(dev, "%s: cannot tx while rx is enabled\n", __func__); + ret = -EIO; + goto out; + } + + sample_lens = kzalloc(sizeof(int) * RR3_DRIVER_MAXLENS, GFP_KERNEL); + if (!sample_lens) { + ret = -ENOMEM; + goto out; + } + + for (i = 0; i < count; i++) { + for (lencheck = 0; lencheck < curlencheck; lencheck++) { + cur_sample_len = redrat3_us_to_len(txbuf[i]); + if (sample_lens[lencheck] == cur_sample_len) + break; + } + if (lencheck == curlencheck) { + cur_sample_len = redrat3_us_to_len(txbuf[i]); + rr3_dbg(dev, "txbuf[%d]=%u, pos %d, enc %u\n", + i, txbuf[i], curlencheck, cur_sample_len); + if (curlencheck < 255) { + /* now convert the value to a proper + * rr3 value.. */ + sample_lens[curlencheck] = cur_sample_len; + curlencheck++; + } else { + dev_err(dev, "signal too long\n"); + ret = -EINVAL; + goto out; + } + } + } + + sigdata = kzalloc((count + RR3_TX_TRAILER_LEN), GFP_KERNEL); + if (!sigdata) { + ret = -ENOMEM; + goto out; + } + + sigdata[count] = RR3_END_OF_SIGNAL; + sigdata[count + 1] = RR3_END_OF_SIGNAL; + for (i = 0; i < count; i++) { + for (j = 0; j < curlencheck; j++) { + if (sample_lens[j] == redrat3_us_to_len(txbuf[i])) + sigdata[i] = j; + } + } + + offset = RR3_TX_HEADER_OFFSET; + sendbuf_len = RR3_HEADER_LENGTH + (sizeof(u16) * RR3_DRIVER_MAXLENS) + + count + RR3_TX_TRAILER_LEN + offset; + + buffer = kzalloc(sendbuf_len, GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto out; + } + + /* fill in our packet header */ + header.length = sendbuf_len - offset; + header.transfer_type = RR3_MOD_SIGNAL_OUT; + header.pause = redrat3_len_to_us(100); + header.mod_freq_count = mod_freq_to_val(rr3->carrier); + header.no_periods = 0; /* n/a to transmit */ + header.max_lengths = RR3_DRIVER_MAXLENS; + header.no_lengths = curlencheck; + header.max_sig_size = RR3_MAX_SIG_SIZE; + header.sig_size = count + RR3_TX_TRAILER_LEN; + /* we currently rely on repeat handling in the IR encoding source */ + header.no_repeats = 0; + + tmps = cpu_to_be16(header.length); + memcpy(buffer, &tmps, 2); + + tmps = cpu_to_be16(header.transfer_type); + memcpy(buffer + 2, &tmps, 2); + + tmpi = cpu_to_be32(header.pause); + memcpy(buffer + offset, &tmpi, sizeof(tmpi)); + + tmps = cpu_to_be16(header.mod_freq_count); + memcpy(buffer + offset + RR3_FREQ_COUNT_OFFSET, &tmps, 2); + + buffer[offset + RR3_NUM_LENGTHS_OFFSET] = header.no_lengths; + + tmps = cpu_to_be16(header.sig_size); + memcpy(buffer + offset + RR3_NUM_SIGS_OFFSET, &tmps, 2); + + buffer[offset + RR3_REPEATS_OFFSET] = header.no_repeats; + + lengths_ptr = (u16 *)(buffer + offset + RR3_HEADER_LENGTH); + for (i = 0; i < curlencheck; ++i) + lengths_ptr[i] = cpu_to_be16(sample_lens[i]); + + datap = (u8 *)(buffer + offset + RR3_HEADER_LENGTH + + (sizeof(u16) * RR3_DRIVER_MAXLENS)); + memcpy(datap, sigdata, (count + RR3_TX_TRAILER_LEN)); + + if (debug) { + redrat3_dump_signal_header(&header); + redrat3_dump_signal_data(buffer, header.sig_size); + } + + pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress); + tmps = usb_bulk_msg(rr3->udev, pipe, buffer, + sendbuf_len, &ret_len, 10 * HZ); + rr3_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, tmps); + + /* now tell the hardware to transmit what we sent it */ + pipe = usb_rcvctrlpipe(rr3->udev, 0); + ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0, 0, buffer, 2, HZ * 10); + + if (ret < 0) + dev_err(dev, "Error: control msg send failed, rc %d\n", ret); + else + ret = n; + +out: + kfree(sample_lens); + kfree(buffer); + kfree(sigdata); + + rr3->transmitting = false; + + redrat3_enable_detector(rr3); + + return ret; +} + +static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3) +{ + struct device *dev = rr3->dev; + struct rc_dev *rc; + int ret = -ENODEV; + u16 prod = le16_to_cpu(rr3->udev->descriptor.idProduct); + + rc = rc_allocate_device(); + if (!rc) { + dev_err(dev, "remote input dev allocation failed\n"); + goto out; + } + + snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s " + "Infrared Remote Transceiver (%04x:%04x)", + prod == USB_RR3IIUSB_PRODUCT_ID ? "-II" : "", + le16_to_cpu(rr3->udev->descriptor.idVendor), prod); + + usb_make_path(rr3->udev, rr3->phys, sizeof(rr3->phys)); + + rc->input_name = rr3->name; + rc->input_phys = rr3->phys; + usb_to_input_id(rr3->udev, &rc->input_id); + rc->dev.parent = dev; + rc->priv = rr3; + rc->driver_type = RC_DRIVER_IR_RAW; + rc->allowed_protos = RC_TYPE_ALL; + rc->min_timeout = MS_TO_NS(RR3_RX_MIN_TIMEOUT); + rc->max_timeout = MS_TO_NS(RR3_RX_MAX_TIMEOUT); + rc->timeout = redrat3_get_timeout(dev, rc, rr3->udev); + rc->tx_ir = redrat3_transmit_ir; + rc->s_tx_carrier = redrat3_set_tx_carrier; + rc->driver_name = DRIVER_NAME; + rc->map_name = RC_MAP_HAUPPAUGE; + + ret = rc_register_device(rc); + if (ret < 0) { + dev_err(dev, "remote dev registration failed\n"); + goto out; + } + + return rc; + +out: + rc_free_device(rc); + return NULL; +} + +static int __devinit redrat3_dev_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct device *dev = &intf->dev; + struct usb_host_interface *uhi; + struct redrat3_dev *rr3; + struct usb_endpoint_descriptor *ep; + struct usb_endpoint_descriptor *ep_in = NULL; + struct usb_endpoint_descriptor *ep_out = NULL; + u8 addr, attrs; + int pipe, i; + int retval = -ENOMEM; + + rr3_ftr(dev, "%s called\n", __func__); + + uhi = intf->cur_altsetting; + + /* find our bulk-in and bulk-out endpoints */ + for (i = 0; i < uhi->desc.bNumEndpoints; ++i) { + ep = &uhi->endpoint[i].desc; + addr = ep->bEndpointAddress; + attrs = ep->bmAttributes; + + if ((ep_in == NULL) && + ((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && + ((attrs & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK)) { + rr3_dbg(dev, "found bulk-in endpoint at 0x%02x\n", + ep->bEndpointAddress); + /* data comes in on 0x82, 0x81 is for other data... */ + if (ep->bEndpointAddress == RR3_BULK_IN_EP_ADDR) + ep_in = ep; + } + + if ((ep_out == NULL) && + ((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && + ((attrs & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK)) { + rr3_dbg(dev, "found bulk-out endpoint at 0x%02x\n", + ep->bEndpointAddress); + ep_out = ep; + } + } + + if (!ep_in || !ep_out) { + dev_err(dev, "Couldn't find both in and out endpoints\n"); + retval = -ENODEV; + goto no_endpoints; + } + + /* allocate memory for our device state and initialize it */ + rr3 = kzalloc(sizeof(*rr3), GFP_KERNEL); + if (rr3 == NULL) { + dev_err(dev, "Memory allocation failure\n"); + goto error; + } + + rr3->dev = &intf->dev; + + /* set up bulk-in endpoint */ + rr3->read_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rr3->read_urb) { + dev_err(dev, "Read urb allocation failure\n"); + goto error; + } + + rr3->ep_in = ep_in; + rr3->bulk_in_buf = usb_alloc_coherent(udev, ep_in->wMaxPacketSize, + GFP_ATOMIC, &rr3->dma_in); + if (!rr3->bulk_in_buf) { + dev_err(dev, "Read buffer allocation failure\n"); + goto error; + } + + pipe = usb_rcvbulkpipe(udev, ep_in->bEndpointAddress); + usb_fill_bulk_urb(rr3->read_urb, udev, pipe, + rr3->bulk_in_buf, ep_in->wMaxPacketSize, + (usb_complete_t)redrat3_handle_async, rr3); + + /* set up bulk-out endpoint*/ + rr3->write_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rr3->write_urb) { + dev_err(dev, "Write urb allocation failure\n"); + goto error; + } + + rr3->ep_out = ep_out; + rr3->bulk_out_buf = usb_alloc_coherent(udev, ep_out->wMaxPacketSize, + GFP_ATOMIC, &rr3->dma_out); + if (!rr3->bulk_out_buf) { + dev_err(dev, "Write buffer allocation failure\n"); + goto error; + } + + pipe = usb_sndbulkpipe(udev, ep_out->bEndpointAddress); + usb_fill_bulk_urb(rr3->write_urb, udev, pipe, + rr3->bulk_out_buf, ep_out->wMaxPacketSize, + (usb_complete_t)redrat3_write_bulk_callback, rr3); + + mutex_init(&rr3->lock); + rr3->udev = udev; + + redrat3_reset(rr3); + redrat3_get_firmware_rev(rr3); + + /* might be all we need to do? */ + retval = redrat3_enable_detector(rr3); + if (retval < 0) + goto error; + + /* default.. will get overridden by any sends with a freq defined */ + rr3->carrier = 38000; + + rr3->rc = redrat3_init_rc_dev(rr3); + if (!rr3->rc) + goto error; + + setup_timer(&rr3->rx_timeout, redrat3_rx_timeout, (unsigned long)rr3); + + /* we can register the device now, as it is ready */ + usb_set_intfdata(intf, rr3); + + rr3_ftr(dev, "Exiting %s\n", __func__); + return 0; + +error: + redrat3_delete(rr3, rr3->udev); + +no_endpoints: + dev_err(dev, "%s: retval = %x", __func__, retval); + + return retval; +} + +static void __devexit redrat3_dev_disconnect(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct redrat3_dev *rr3 = usb_get_intfdata(intf); + + rr3_ftr(&intf->dev, "Entering %s\n", __func__); + + if (!rr3) + return; + + redrat3_disable_detector(rr3); + + usb_set_intfdata(intf, NULL); + rc_unregister_device(rr3->rc); + redrat3_delete(rr3, udev); + + rr3_ftr(&intf->dev, "RedRat3 IR Transceiver now disconnected\n"); +} + +static int redrat3_dev_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct redrat3_dev *rr3 = usb_get_intfdata(intf); + rr3_ftr(rr3->dev, "suspend\n"); + usb_kill_urb(rr3->read_urb); + return 0; +} + +static int redrat3_dev_resume(struct usb_interface *intf) +{ + struct redrat3_dev *rr3 = usb_get_intfdata(intf); + rr3_ftr(rr3->dev, "resume\n"); + if (usb_submit_urb(rr3->read_urb, GFP_ATOMIC)) + return -EIO; + return 0; +} + +static struct usb_driver redrat3_dev_driver = { + .name = DRIVER_NAME, + .probe = redrat3_dev_probe, + .disconnect = redrat3_dev_disconnect, + .suspend = redrat3_dev_suspend, + .resume = redrat3_dev_resume, + .reset_resume = redrat3_dev_resume, + .id_table = redrat3_dev_table +}; + +static int __init redrat3_dev_init(void) +{ + int ret; + + ret = usb_register(&redrat3_dev_driver); + if (ret < 0) + pr_err(DRIVER_NAME + ": usb register failed, result = %d\n", ret); + + return ret; +} + +static void __exit redrat3_dev_exit(void) +{ + usb_deregister(&redrat3_dev_driver); +} + +module_init(redrat3_dev_init); +module_exit(redrat3_dev_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_AUTHOR(DRIVER_AUTHOR2); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, redrat3_dev_table); + +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable module debug spew. 0 = no debugging (default) " + "0x1 = standard debug messages, 0x2 = function tracing debug. " + "Flag bits are addative (i.e., 0x3 for both debug types)."); |