diff options
Diffstat (limited to 'drivers/media/rc/winbond-cir.c')
| -rw-r--r-- | drivers/media/rc/winbond-cir.c | 41 |
1 files changed, 26 insertions, 15 deletions
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index 930c6149903..535a18dccbd 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -154,6 +154,8 @@ #define WBCIR_CNTR_R 0x02 /* Invert TX */ #define WBCIR_IRTX_INV 0x04 +/* Receiver oversampling */ +#define WBCIR_RX_T_OV 0x40 /* Valid banks for the SP3 UART */ enum wbcir_bank { @@ -394,7 +396,8 @@ wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev *device) if (data->rxstate == WBCIR_RXSTATE_ERROR) continue; - duration = ((irdata & 0x7F) + 1) * 2; + duration = ((irdata & 0x7F) + 1) * + (data->carrier_report_enabled ? 2 : 10); rawir.pulse = irdata & 0x80 ? false : true; rawir.duration = US_TO_NS(duration); @@ -550,6 +553,17 @@ wbcir_set_carrier_report(struct rc_dev *dev, int enable) wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CCTL, WBCIR_CNTR_EN, WBCIR_CNTR_EN | WBCIR_CNTR_R); + /* Set a higher sampling resolution if carrier reports are enabled */ + wbcir_select_bank(data, WBCIR_BANK_2); + data->dev->rx_resolution = US_TO_NS(enable ? 2 : 10); + outb(enable ? 0x03 : 0x0f, data->sbase + WBCIR_REG_SP3_BGDL); + outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); + + /* Enable oversampling if carrier reports are enabled */ + wbcir_select_bank(data, WBCIR_BANK_7); + wbcir_set_bits(data->sbase + WBCIR_REG_SP3_RCCFG, + enable ? WBCIR_RX_T_OV : 0, WBCIR_RX_T_OV); + data->carrier_report_enabled = enable; spin_unlock_irqrestore(&data->spinlock, flags); @@ -931,8 +945,8 @@ wbcir_init_hw(struct wbcir_data *data) /* prescaler 1.0, tx/rx fifo lvl 16 */ outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2); - /* Set baud divisor to sample every 2 ns */ - outb(0x03, data->sbase + WBCIR_REG_SP3_BGDL); + /* Set baud divisor to sample every 10 us */ + outb(0x0f, data->sbase + WBCIR_REG_SP3_BGDL); outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); /* Set CEIR mode */ @@ -941,12 +955,9 @@ wbcir_init_hw(struct wbcir_data *data) inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */ inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */ - /* - * Disable RX demod, enable run-length enc/dec, set freq span and - * enable over-sampling - */ + /* Disable RX demod, enable run-length enc/dec, set freq span */ wbcir_select_bank(data, WBCIR_BANK_7); - outb(0xd0, data->sbase + WBCIR_REG_SP3_RCCFG); + outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG); /* Disable timer */ wbcir_select_bank(data, WBCIR_BANK_4); @@ -1093,11 +1104,15 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) data->dev->rx_resolution = US_TO_NS(2); data->dev->allowed_protos = RC_BIT_ALL; + err = rc_register_device(data->dev); + if (err) + goto exit_free_rc; + if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) { dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", data->wbase, data->wbase + WAKEUP_IOMEM_LEN - 1); err = -EBUSY; - goto exit_free_rc; + goto exit_unregister_device; } if (!request_region(data->ebase, EHFUNC_IOMEM_LEN, DRVNAME)) { @@ -1122,24 +1137,20 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) goto exit_release_sbase; } - err = rc_register_device(data->dev); - if (err) - goto exit_free_irq; - device_init_wakeup(&device->dev, 1); wbcir_init_hw(data); return 0; -exit_free_irq: - free_irq(data->irq, device); exit_release_sbase: release_region(data->sbase, SP_IOMEM_LEN); exit_release_ebase: release_region(data->ebase, EHFUNC_IOMEM_LEN); exit_release_wbase: release_region(data->wbase, WAKEUP_IOMEM_LEN); +exit_unregister_device: + rc_unregister_device(data->dev); exit_free_rc: rc_free_device(data->dev); exit_unregister_led: |