diff options
Diffstat (limited to 'drivers/media/usb/dvb-usb-v2/af9015.c')
| -rw-r--r-- | drivers/media/usb/dvb-usb-v2/af9015.c | 1454 |
1 files changed, 1454 insertions, 0 deletions
diff --git a/drivers/media/usb/dvb-usb-v2/af9015.c b/drivers/media/usb/dvb-usb-v2/af9015.c new file mode 100644 index 00000000000..824f1911ee2 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/af9015.c @@ -0,0 +1,1454 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "af9015.h" + +static int dvb_usb_af9015_remote; +module_param_named(remote, dvb_usb_af9015_remote, int, 0644); +MODULE_PARM_DESC(remote, "select remote"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) +{ +#define BUF_LEN 63 +#define REQ_HDR_LEN 8 /* send header size */ +#define ACK_HDR_LEN 2 /* rece header size */ + struct af9015_state *state = d_to_priv(d); + int ret, wlen, rlen; + u8 buf[BUF_LEN]; + u8 write = 1; + + buf[0] = req->cmd; + buf[1] = state->seq++; + buf[2] = req->i2c_addr; + buf[3] = req->addr >> 8; + buf[4] = req->addr & 0xff; + buf[5] = req->mbox; + buf[6] = req->addr_len; + buf[7] = req->data_len; + + switch (req->cmd) { + case GET_CONFIG: + case READ_MEMORY: + case RECONNECT_USB: + write = 0; + break; + case READ_I2C: + write = 0; + buf[2] |= 0x01; /* set I2C direction */ + case WRITE_I2C: + buf[0] = READ_WRITE_I2C; + break; + case WRITE_MEMORY: + if (((req->addr & 0xff00) == 0xff00) || + ((req->addr & 0xff00) == 0xae00)) + buf[0] = WRITE_VIRTUAL_MEMORY; + case WRITE_VIRTUAL_MEMORY: + case COPY_FIRMWARE: + case DOWNLOAD_FIRMWARE: + case BOOT: + break; + default: + dev_err(&d->udev->dev, "%s: unknown command=%d\n", + KBUILD_MODNAME, req->cmd); + ret = -EIO; + goto error; + } + + /* buffer overflow check */ + if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) || + (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) { + dev_err(&d->udev->dev, "%s: too much data; cmd=%d len=%d\n", + KBUILD_MODNAME, req->cmd, req->data_len); + ret = -EINVAL; + goto error; + } + + /* write receives seq + status = 2 bytes + read receives seq + status + data = 2 + N bytes */ + wlen = REQ_HDR_LEN; + rlen = ACK_HDR_LEN; + if (write) { + wlen += req->data_len; + memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len); + } else { + rlen += req->data_len; + } + + /* no ack for these packets */ + if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) + rlen = 0; + + ret = dvb_usbv2_generic_rw(d, buf, wlen, buf, rlen); + if (ret) + goto error; + + /* check status */ + if (rlen && buf[1]) { + dev_err(&d->udev->dev, "%s: command failed=%d\n", + KBUILD_MODNAME, buf[1]); + ret = -EIO; + goto error; + } + + /* read request, copy returned data to return buf */ + if (!write) + memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len); +error: + return ret; +} + +static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, + u8 len) +{ + struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, + val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len) +{ + struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, + val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) +{ + return af9015_write_regs(d, addr, &val, 1); +} + +static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) +{ + return af9015_read_regs(d, addr, val, 1); +} + +static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 val) +{ + struct af9015_state *state = d_to_priv(d); + struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; + + if (addr == state->af9013_config[0].i2c_addr || + addr == state->af9013_config[1].i2c_addr) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 *val) +{ + struct af9015_state *state = d_to_priv(d); + struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; + + if (addr == state->af9013_config[0].i2c_addr || + addr == state->af9013_config[1].i2c_addr) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) +{ + int ret; + u8 val, mask = 0x01; + + ret = af9015_read_reg(d, addr, &val); + if (ret) + return ret; + + mask <<= bit; + if (op) { + /* set bit */ + val |= mask; + } else { + /* clear bit */ + mask ^= 0xff; + val &= mask; + } + + return af9015_write_reg(d, addr, val); +} + +static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 1); +} + +static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 0); +} + +static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct af9015_state *state = d_to_priv(d); + int ret = 0, i = 0; + u16 addr; + u8 uninitialized_var(mbox), addr_len; + struct req_t req; + +/* +The bus lock is needed because there is two tuners both using same I2C-address. +Due to that the only way to select correct tuner is use demodulator I2C-gate. + +................................................ +. AF9015 includes integrated AF9013 demodulator. +. ____________ ____________ . ____________ +.| uC | | demod | . | tuner | +.|------------| |------------| . |------------| +.| AF9015 | | AF9013/5 | . | MXL5003 | +.| |--+----I2C-------|-----/ -----|-.-----I2C-------| | +.| | | | addr 0x38 | . | addr 0xc6 | +.|____________| | |____________| . |____________| +.................|.............................. + | ____________ ____________ + | | demod | | tuner | + | |------------| |------------| + | | AF9013 | | MXL5003 | + +----I2C-------|-----/ -----|-------I2C-------| | + | addr 0x3a | | addr 0xc6 | + |____________| |____________| +*/ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (msg[i].addr == state->af9013_config[0].i2c_addr || + msg[i].addr == state->af9013_config[1].i2c_addr) { + addr = msg[i].buf[0] << 8; + addr += msg[i].buf[1]; + mbox = msg[i].buf[2]; + addr_len = 3; + } else { + addr = msg[i].buf[0]; + addr_len = 1; + /* mbox is don't care in that case */ + } + + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + if (msg[i].len > 3 || msg[i+1].len > 61) { + ret = -EOPNOTSUPP; + goto error; + } + if (msg[i].addr == state->af9013_config[0].i2c_addr) + req.cmd = READ_MEMORY; + else + req.cmd = READ_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i+1].len; + req.data = &msg[i+1].buf[0]; + ret = af9015_ctrl_msg(d, &req); + i += 2; + } else if (msg[i].flags & I2C_M_RD) { + if (msg[i].len > 61) { + ret = -EOPNOTSUPP; + goto error; + } + if (msg[i].addr == state->af9013_config[0].i2c_addr) { + ret = -EINVAL; + goto error; + } + req.cmd = READ_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i].len; + req.data = &msg[i].buf[0]; + ret = af9015_ctrl_msg(d, &req); + i += 1; + } else { + if (msg[i].len > 21) { + ret = -EOPNOTSUPP; + goto error; + } + if (msg[i].addr == state->af9013_config[0].i2c_addr) + req.cmd = WRITE_MEMORY; + else + req.cmd = WRITE_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i].len-addr_len; + req.data = &msg[i].buf[addr_len]; + ret = af9015_ctrl_msg(d, &req); + i += 1; + } + if (ret) + goto error; + + } + ret = i; + +error: + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +static u32 af9015_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm af9015_i2c_algo = { + .master_xfer = af9015_i2c_xfer, + .functionality = af9015_i2c_func, +}; + +static int af9015_identify_state(struct dvb_usb_device *d, const char **name) +{ + int ret; + u8 reply; + struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; + + ret = af9015_ctrl_msg(d, &req); + if (ret) + return ret; + + dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply); + + if (reply == 0x02) + ret = WARM; + else + ret = COLD; + + return ret; +} + +static int af9015_download_firmware(struct dvb_usb_device *d, + const struct firmware *fw) +{ + struct af9015_state *state = d_to_priv(d); + int i, len, remaining, ret; + struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; + u16 checksum = 0; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + /* calc checksum */ + for (i = 0; i < fw->size; i++) + checksum += fw->data[i]; + + state->firmware_size = fw->size; + state->firmware_checksum = checksum; + + #define FW_ADDR 0x5100 /* firmware start address */ + #define LEN_MAX 55 /* max packet size */ + for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { + len = remaining; + if (len > LEN_MAX) + len = LEN_MAX; + + req.data_len = len; + req.data = (u8 *) &fw->data[fw->size - remaining]; + req.addr = FW_ADDR + fw->size - remaining; + + ret = af9015_ctrl_msg(d, &req); + if (ret) { + dev_err(&d->udev->dev, + "%s: firmware download failed=%d\n", + KBUILD_MODNAME, ret); + goto error; + } + } + + /* firmware loaded, request boot */ + req.cmd = BOOT; + req.data_len = 0; + ret = af9015_ctrl_msg(d, &req); + if (ret) { + dev_err(&d->udev->dev, "%s: firmware boot failed=%d\n", + KBUILD_MODNAME, ret); + goto error; + } + +error: + return ret; +} + +/* hash (and dump) eeprom */ +static int af9015_eeprom_hash(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret, i; + static const unsigned int AF9015_EEPROM_SIZE = 256; + u8 buf[AF9015_EEPROM_SIZE]; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, NULL}; + + /* read eeprom */ + for (i = 0; i < AF9015_EEPROM_SIZE; i++) { + req.addr = i; + req.data = &buf[i]; + ret = af9015_ctrl_msg(d, &req); + if (ret < 0) + goto err; + } + + /* calculate checksum */ + for (i = 0; i < AF9015_EEPROM_SIZE / sizeof(u32); i++) { + state->eeprom_sum *= GOLDEN_RATIO_PRIME_32; + state->eeprom_sum += le32_to_cpu(((u32 *)buf)[i]); + } + + for (i = 0; i < AF9015_EEPROM_SIZE; i += 16) + dev_dbg(&d->udev->dev, "%s: %*ph\n", __func__, 16, buf + i); + + dev_dbg(&d->udev->dev, "%s: eeprom sum=%.8x\n", + __func__, state->eeprom_sum); + return 0; +err: + dev_err(&d->udev->dev, "%s: eeprom failed=%d\n", KBUILD_MODNAME, ret); + return ret; +} + +static int af9015_read_config(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + u8 val, i, offset = 0; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; + + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + /* IR remote controller */ + req.addr = AF9015_EEPROM_IR_MODE; + /* first message will timeout often due to possible hw bug */ + for (i = 0; i < 4; i++) { + ret = af9015_ctrl_msg(d, &req); + if (!ret) + break; + } + if (ret) + goto error; + + ret = af9015_eeprom_hash(d); + if (ret) + goto error; + + state->ir_mode = val; + dev_dbg(&d->udev->dev, "%s: IR mode=%d\n", __func__, val); + + /* TS mode - one or two receivers */ + req.addr = AF9015_EEPROM_TS_MODE; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + + state->dual_mode = val; + dev_dbg(&d->udev->dev, "%s: TS mode=%d\n", __func__, state->dual_mode); + + /* disable 2nd adapter because we don't have PID-filters */ + if (d->udev->speed == USB_SPEED_FULL) + state->dual_mode = 0; + + if (state->dual_mode) { + /* read 2nd demodulator I2C address */ + req.addr = AF9015_EEPROM_DEMOD2_I2C; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + + state->af9013_config[1].i2c_addr = val; + } + + for (i = 0; i < state->dual_mode + 1; i++) { + if (i == 1) + offset = AF9015_EEPROM_OFFSET; + /* xtal */ + req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + switch (val) { + case 0: + state->af9013_config[i].clock = 28800000; + break; + case 1: + state->af9013_config[i].clock = 20480000; + break; + case 2: + state->af9013_config[i].clock = 28000000; + break; + case 3: + state->af9013_config[i].clock = 25000000; + break; + }; + dev_dbg(&d->udev->dev, "%s: [%d] xtal=%d set clock=%d\n", + __func__, i, val, + state->af9013_config[i].clock); + + /* IF frequency */ + req.addr = AF9015_EEPROM_IF1H + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + + state->af9013_config[i].if_frequency = val << 8; + + req.addr = AF9015_EEPROM_IF1L + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + + state->af9013_config[i].if_frequency += val; + state->af9013_config[i].if_frequency *= 1000; + dev_dbg(&d->udev->dev, "%s: [%d] IF frequency=%d\n", __func__, + i, state->af9013_config[i].if_frequency); + + /* MT2060 IF1 */ + req.addr = AF9015_EEPROM_MT2060_IF1H + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + state->mt2060_if1[i] = val << 8; + req.addr = AF9015_EEPROM_MT2060_IF1L + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + state->mt2060_if1[i] += val; + dev_dbg(&d->udev->dev, "%s: [%d] MT2060 IF1=%d\n", __func__, i, + state->mt2060_if1[i]); + + /* tuner */ + req.addr = AF9015_EEPROM_TUNER_ID1 + offset; + ret = af9015_ctrl_msg(d, &req); + if (ret) + goto error; + switch (val) { + case AF9013_TUNER_ENV77H11D5: + case AF9013_TUNER_MT2060: + case AF9013_TUNER_QT1010: + case AF9013_TUNER_UNKNOWN: + case AF9013_TUNER_MT2060_2: + case AF9013_TUNER_TDA18271: + case AF9013_TUNER_QT1010A: + case AF9013_TUNER_TDA18218: + state->af9013_config[i].spec_inv = 1; + break; + case AF9013_TUNER_MXL5003D: + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + case AF9013_TUNER_MXL5007T: + state->af9013_config[i].spec_inv = 0; + break; + case AF9013_TUNER_MC44S803: + state->af9013_config[i].gpio[1] = AF9013_GPIO_LO; + state->af9013_config[i].spec_inv = 1; + break; + default: + dev_err(&d->udev->dev, "%s: tuner id=%d not " \ + "supported, please report!\n", + KBUILD_MODNAME, val); + return -ENODEV; + }; + + state->af9013_config[i].tuner = val; + dev_dbg(&d->udev->dev, "%s: [%d] tuner id=%d\n", + __func__, i, val); + } + +error: + if (ret) + dev_err(&d->udev->dev, "%s: eeprom read failed=%d\n", + KBUILD_MODNAME, ret); + + /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM + content :-( Override some wrong values here. Ditto for the + AVerTV Red HD+ (A850T) device. */ + if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA && + ((le16_to_cpu(d->udev->descriptor.idProduct) == + USB_PID_AVERMEDIA_A850) || + (le16_to_cpu(d->udev->descriptor.idProduct) == + USB_PID_AVERMEDIA_A850T))) { + dev_dbg(&d->udev->dev, + "%s: AverMedia A850: overriding config\n", + __func__); + /* disable dual mode */ + state->dual_mode = 0; + + /* set correct IF */ + state->af9013_config[0].if_frequency = 4570000; + } + + return ret; +} + +static int af9015_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, + struct usb_data_stream_properties *stream) +{ + struct dvb_usb_device *d = fe_to_d(fe); + dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, fe_to_adap(fe)->id); + + if (d->udev->speed == USB_SPEED_FULL) + stream->u.bulk.buffersize = TS_USB11_FRAME_SIZE; + + return 0; +} + +static int af9015_get_adapter_count(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + return state->dual_mode + 1; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_set_frontend(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->set_frontend[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_read_status(struct dvb_frontend *fe, + fe_status_t *status) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->read_status[fe_to_adap(fe)->id](fe, status); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_init(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->init[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_sleep(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->sleep[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override tuner callbacks for resource locking */ +static int af9015_tuner_init(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->tuner_init[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +/* override tuner callbacks for resource locking */ +static int af9015_tuner_sleep(struct dvb_frontend *fe) +{ + int ret; + struct af9015_state *state = fe_to_priv(fe); + + if (mutex_lock_interruptible(&state->fe_mutex)) + return -EAGAIN; + + ret = state->tuner_sleep[fe_to_adap(fe)->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +static int af9015_copy_firmware(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + u8 fw_params[4]; + u8 val, i; + struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), + fw_params }; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + fw_params[0] = state->firmware_size >> 8; + fw_params[1] = state->firmware_size & 0xff; + fw_params[2] = state->firmware_checksum >> 8; + fw_params[3] = state->firmware_checksum & 0xff; + + /* wait 2nd demodulator ready */ + msleep(100); + + ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr, + 0x98be, &val); + if (ret) + goto error; + else + dev_dbg(&d->udev->dev, "%s: firmware status=%02x\n", + __func__, val); + + if (val == 0x0c) /* fw is running, no need for download */ + goto exit; + + /* set I2C master clock to fast (to speed up firmware copy) */ + ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ + if (ret) + goto error; + + msleep(50); + + /* copy firmware */ + ret = af9015_ctrl_msg(d, &req); + if (ret) + dev_err(&d->udev->dev, "%s: firmware copy cmd failed=%d\n", + KBUILD_MODNAME, ret); + + dev_dbg(&d->udev->dev, "%s: firmware copy done\n", __func__); + + /* set I2C master clock back to normal */ + ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ + if (ret) + goto error; + + /* request boot firmware */ + ret = af9015_write_reg_i2c(d, state->af9013_config[1].i2c_addr, + 0xe205, 1); + dev_dbg(&d->udev->dev, "%s: firmware boot cmd status=%d\n", + __func__, ret); + if (ret) + goto error; + + for (i = 0; i < 15; i++) { + msleep(100); + + /* check firmware status */ + ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr, + 0x98be, &val); + dev_dbg(&d->udev->dev, "%s: firmware status cmd status=%d " \ + "firmware status=%02x\n", __func__, ret, val); + if (ret) + goto error; + + if (val == 0x0c || val == 0x04) /* success or fail */ + break; + } + + if (val == 0x04) { + dev_err(&d->udev->dev, "%s: firmware did not run\n", + KBUILD_MODNAME); + ret = -ETIMEDOUT; + } else if (val != 0x0c) { + dev_err(&d->udev->dev, "%s: firmware boot timeout\n", + KBUILD_MODNAME); + ret = -ETIMEDOUT; + } + +error: +exit: + return ret; +} + +static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct af9015_state *state = adap_to_priv(adap); + + if (adap->id == 0) { + state->af9013_config[0].ts_mode = AF9013_TS_USB; + memcpy(state->af9013_config[0].api_version, "\x0\x1\x9\x0", 4); + state->af9013_config[0].gpio[0] = AF9013_GPIO_HI; + state->af9013_config[0].gpio[3] = AF9013_GPIO_TUNER_ON; + } else if (adap->id == 1) { + state->af9013_config[1].ts_mode = AF9013_TS_SERIAL; + memcpy(state->af9013_config[1].api_version, "\x0\x1\x9\x0", 4); + state->af9013_config[1].gpio[0] = AF9013_GPIO_TUNER_ON; + state->af9013_config[1].gpio[1] = AF9013_GPIO_LO; + + /* copy firmware to 2nd demodulator */ + if (state->dual_mode) { + ret = af9015_copy_firmware(adap_to_d(adap)); + if (ret) { + dev_err(&adap_to_d(adap)->udev->dev, + "%s: firmware copy to 2nd " \ + "frontend failed, will " \ + "disable it\n", KBUILD_MODNAME); + state->dual_mode = 0; + return -ENODEV; + } + } else { + return -ENODEV; + } + } + + /* attach demodulator */ + adap->fe[0] = dvb_attach(af9013_attach, + &state->af9013_config[adap->id], &adap_to_d(adap)->i2c_adap); + + /* + * AF9015 firmware does not like if it gets interrupted by I2C adapter + * request on some critical phases. During normal operation I2C adapter + * is used only 2nd demodulator and tuner on dual tuner devices. + * Override demodulator callbacks and use mutex for limit access to + * those "critical" paths to keep AF9015 happy. + */ + if (adap->fe[0]) { + state->set_frontend[adap->id] = + adap->fe[0]->ops.set_frontend; + adap->fe[0]->ops.set_frontend = + af9015_af9013_set_frontend; + + state->read_status[adap->id] = + adap->fe[0]->ops.read_status; + adap->fe[0]->ops.read_status = + af9015_af9013_read_status; + + state->init[adap->id] = adap->fe[0]->ops.init; + adap->fe[0]->ops.init = af9015_af9013_init; + + state->sleep[adap->id] = adap->fe[0]->ops.sleep; + adap->fe[0]->ops.sleep = af9015_af9013_sleep; + } + + return adap->fe[0] == NULL ? -ENODEV : 0; +} + +static struct mt2060_config af9015_mt2060_config = { + .i2c_address = 0xc0, + .clock_out = 0, +}; + +static struct qt1010_config af9015_qt1010_config = { + .i2c_address = 0xc4, +}; + +static struct tda18271_config af9015_tda18271_config = { + .gate = TDA18271_GATE_DIGITAL, + .small_i2c = TDA18271_16_BYTE_CHUNK_INIT, +}; + +static struct mxl5005s_config af9015_mxl5003_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_DEFAULT, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static struct mxl5005s_config af9015_mxl5005_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_OFF, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static struct mc44s803_config af9015_mc44s803_config = { + .i2c_address = 0xc0, + .dig_out = 1, +}; + +static struct tda18218_config af9015_tda18218_config = { + .i2c_address = 0xc0, + .i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */ +}; + +static struct mxl5007t_config af9015_mxl5007t_config = { + .xtal_freq_hz = MxL_XTAL_24_MHZ, + .if_freq_hz = MxL_IF_4_57_MHZ, +}; + +static int af9015_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct af9015_state *state = d_to_priv(d); + int ret; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + switch (state->af9013_config[adap->id].tuner) { + case AF9013_TUNER_MT2060: + case AF9013_TUNER_MT2060_2: + ret = dvb_attach(mt2060_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, &af9015_mt2060_config, + state->mt2060_if1[adap->id]) + == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_QT1010: + case AF9013_TUNER_QT1010A: + ret = dvb_attach(qt1010_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_qt1010_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_TDA18271: + ret = dvb_attach(tda18271_attach, adap->fe[0], 0xc0, + &adap_to_d(adap)->i2c_adap, + &af9015_tda18271_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_TDA18218: + ret = dvb_attach(tda18218_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_tda18218_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5003D: + ret = dvb_attach(mxl5005s_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_mxl5003_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + ret = dvb_attach(mxl5005s_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_mxl5005_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_ENV77H11D5: + ret = dvb_attach(dvb_pll_attach, adap->fe[0], 0xc0, + &adap_to_d(adap)->i2c_adap, + DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MC44S803: + ret = dvb_attach(mc44s803_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + &af9015_mc44s803_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5007T: + ret = dvb_attach(mxl5007t_attach, adap->fe[0], + &adap_to_d(adap)->i2c_adap, + 0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_UNKNOWN: + default: + dev_err(&d->udev->dev, "%s: unknown tuner id=%d\n", + KBUILD_MODNAME, + state->af9013_config[adap->id].tuner); + ret = -ENODEV; + } + + if (adap->fe[0]->ops.tuner_ops.init) { + state->tuner_init[adap->id] = + adap->fe[0]->ops.tuner_ops.init; + adap->fe[0]->ops.tuner_ops.init = af9015_tuner_init; + } + + if (adap->fe[0]->ops.tuner_ops.sleep) { + state->tuner_sleep[adap->id] = + adap->fe[0]->ops.tuner_ops.sleep; + adap->fe[0]->ops.tuner_ops.sleep = af9015_tuner_sleep; + } + + return ret; +} + +static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct dvb_usb_device *d = adap_to_d(adap); + int ret; + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); + + if (onoff) + ret = af9015_set_reg_bit(d, 0xd503, 0); + else + ret = af9015_clear_reg_bit(d, 0xd503, 0); + + return ret; +} + +static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + struct dvb_usb_device *d = adap_to_d(adap); + int ret; + u8 idx; + dev_dbg(&d->udev->dev, "%s: index=%d pid=%04x onoff=%d\n", + __func__, index, pid, onoff); + + ret = af9015_write_reg(d, 0xd505, (pid & 0xff)); + if (ret) + goto error; + + ret = af9015_write_reg(d, 0xd506, (pid >> 8)); + if (ret) + goto error; + + idx = ((index & 0x1f) | (1 << 5)); + ret = af9015_write_reg(d, 0xd504, idx); + +error: + return ret; +} + +static int af9015_init_endpoint(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + u16 frame_size; + u8 packet_size; + dev_dbg(&d->udev->dev, "%s: USB speed=%d\n", __func__, d->udev->speed); + + if (d->udev->speed == USB_SPEED_FULL) { + frame_size = TS_USB11_FRAME_SIZE/4; + packet_size = TS_USB11_MAX_PACKET_SIZE/4; + } else { + frame_size = TS_USB20_FRAME_SIZE/4; + packet_size = TS_USB20_MAX_PACKET_SIZE/4; + } + + ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ + if (ret) + goto error; + if (state->dual_mode) { + ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ + if (ret) + goto error; + } + ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ + if (ret) + goto error; + if (state->dual_mode) { + ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ + if (ret) + goto error; + } + /* EP4 xfer length */ + ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); + if (ret) + goto error; + /* EP5 xfer length */ + ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ + if (ret) + goto error; + if (state->dual_mode) { + ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ + if (ret) + goto error; + } + + /* enable / disable mp2if2 */ + if (state->dual_mode) + ret = af9015_set_reg_bit(d, 0xd50b, 0); + else + ret = af9015_clear_reg_bit(d, 0xd50b, 0); + +error: + if (ret) + dev_err(&d->udev->dev, "%s: endpoint init failed=%d\n", + KBUILD_MODNAME, ret); + + return ret; +} + +static int af9015_init(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + mutex_init(&state->fe_mutex); + + /* init RC canary */ + ret = af9015_write_reg(d, 0x98e9, 0xff); + if (ret) + goto error; + + ret = af9015_init_endpoint(d); + if (ret) + goto error; + +error: + return ret; +} + +struct af9015_rc_setup { + unsigned int id; + char *rc_codes; +}; + +static char *af9015_rc_setup_match(unsigned int id, + const struct af9015_rc_setup *table) +{ + for (; table->rc_codes; table++) + if (table->id == id) + return table->rc_codes; + return NULL; +} + +static const struct af9015_rc_setup af9015_rc_setup_modparam[] = { + { AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M }, + { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II }, + { AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND }, + { AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE }, + { AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS }, + { } +}; + +static const struct af9015_rc_setup af9015_rc_setup_hashes[] = { + { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II }, + { 0xa3703d00, RC_MAP_ALINK_DTU_M }, + { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */ + { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */ + { } +}; + +static int af9015_rc_query(struct dvb_usb_device *d) +{ + struct af9015_state *state = d_to_priv(d); + int ret; + u8 buf[17]; + + /* read registers needed to detect remote controller code */ + ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf)); + if (ret) + goto error; + + /* If any of these are non-zero, assume invalid data */ + if (buf[1] || buf[2] || buf[3]) { + dev_dbg(&d->udev->dev, "%s: invalid data\n", __func__); + return ret; + } + + /* Check for repeat of previous code */ + if ((state->rc_repeat != buf[6] || buf[0]) && + !memcmp(&buf[12], state->rc_last, 4)) { + dev_dbg(&d->udev->dev, "%s: key repeated\n", __func__); + rc_keydown(d->rc_dev, state->rc_keycode, 0); + state->rc_repeat = buf[6]; + return ret; + } + + /* Only process key if canary killed */ + if (buf[16] != 0xff && buf[0] != 0x01) { + dev_dbg(&d->udev->dev, "%s: key pressed %*ph\n", + __func__, 4, buf + 12); + + /* Reset the canary */ + ret = af9015_write_reg(d, 0x98e9, 0xff); + if (ret) + goto error; + + /* Remember this key */ + memcpy(state->rc_last, &buf[12], 4); + if (buf[14] == (u8) ~buf[15]) { + if (buf[12] == (u8) ~buf[13]) { + /* NEC */ + state->rc_keycode = buf[12] << 8 | buf[14]; + } else { + /* NEC extended*/ + state->rc_keycode = buf[12] << 16 | + buf[13] << 8 | buf[14]; + } + } else { + /* 32 bit NEC */ + state->rc_keycode = buf[12] << 24 | buf[13] << 16 | + buf[14] << 8 | buf[15]; + } + rc_keydown(d->rc_dev, state->rc_keycode, 0); + } else { + dev_dbg(&d->udev->dev, "%s: no key press\n", __func__); + /* Invalidate last keypress */ + /* Not really needed, but helps with debug */ + state->rc_last[2] = state->rc_last[3]; + } + + state->rc_repeat = buf[6]; + state->rc_failed = false; + +error: + if (ret) { + dev_warn(&d->udev->dev, "%s: rc query failed=%d\n", + KBUILD_MODNAME, ret); + + /* allow random errors as dvb-usb will stop polling on error */ + if (!state->rc_failed) + ret = 0; + + state->rc_failed = true; + } + + return ret; +} + +static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) +{ + struct af9015_state *state = d_to_priv(d); + u16 vid = le16_to_cpu(d->udev->descriptor.idVendor); + + if (state->ir_mode == AF9015_IR_MODE_DISABLED) + return 0; + + /* try to load remote based module param */ + if (!rc->map_name) + rc->map_name = af9015_rc_setup_match(dvb_usb_af9015_remote, + af9015_rc_setup_modparam); + + /* try to load remote based eeprom hash */ + if (!rc->map_name) + rc->map_name = af9015_rc_setup_match(state->eeprom_sum, + af9015_rc_setup_hashes); + + /* try to load remote based USB iManufacturer string */ + if (!rc->map_name && vid == USB_VID_AFATECH) { + /* Check USB manufacturer and product strings and try + to determine correct remote in case of chip vendor + reference IDs are used. + DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */ + char manufacturer[10]; + memset(manufacturer, 0, sizeof(manufacturer)); + usb_string(d->udev, d->udev->descriptor.iManufacturer, + manufacturer, sizeof(manufacturer)); + if (!strcmp("MSI", manufacturer)) { + /* iManufacturer 1 MSI + iProduct 2 MSI K-VOX */ + rc->map_name = af9015_rc_setup_match( + AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, + af9015_rc_setup_modparam); + } + } + + /* load empty to enable rc */ + if (!rc->map_name) + rc->map_name = RC_MAP_EMPTY; + + rc->allowed_protos = RC_TYPE_NEC; + rc->query = af9015_rc_query; + rc->interval = 500; + + return 0; +} + +/* interface 0 is used by DVB-T receiver and + interface 1 is for remote controller (HID) */ +static struct dvb_usb_device_properties af9015_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct af9015_state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .identify_state = af9015_identify_state, + .firmware = AF9015_FIRMWARE, + .download_firmware = af9015_download_firmware, + + .i2c_algo = &af9015_i2c_algo, + .read_config = af9015_read_config, + .frontend_attach = af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .init = af9015_init, + .get_rc_config = af9015_get_rc_config, + .get_stream_config = af9015_get_stream_config, + + .get_adapter_count = af9015_get_adapter_count, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = af9015_pid_filter, + .pid_filter_ctrl = af9015_pid_filter_ctrl, + + .stream = DVB_USB_STREAM_BULK(0x84, 8, TS_USB20_FRAME_SIZE), + }, { + .stream = DVB_USB_STREAM_BULK(0x85, 8, TS_USB20_FRAME_SIZE), + }, + }, +}; + +static const struct usb_device_id af9015_id_table[] = { + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015, + &af9015_props, "Afatech AF9015 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016, + &af9015_props, "Afatech AF9015 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD, + &af9015_props, "Leadtek WinFast DTV Dongle Gold", RC_MAP_LEADTEK_Y04G0051) }, + { DVB_USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E, + &af9015_props, "Pinnacle PCTV 71e", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U, + &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN, + &af9015_props, "DigitalNow TinyTwin", RC_MAP_AZUREWAVE_AD_TU700) }, + { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700, + &af9015_props, "TwinHan AzureWave AD-TU700(704J)", RC_MAP_AZUREWAVE_AD_TU700) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2, + &af9015_props, "TerraTec Cinergy T USB XE", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T, + &af9015_props, "KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X, + &af9015_props, "AVerMedia AVerTV DVB-T Volar X", RC_MAP_AVERMEDIA_M135A) }, + { DVB_USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380, + &af9015_props, "Xtensions XD-380", NULL) }, + { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO, + &af9015_props, "MSI DIGIVOX Duo", RC_MAP_MSI_DIGIVOX_III) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2, + &af9015_props, "Fujitsu-Siemens Slim Mobile USB DVB-T", NULL) }, + { DVB_USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2, + &af9015_props, "Telestar Starstick 2", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309, + &af9015_props, "AVerMedia A309", NULL) }, + { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III, + &af9015_props, "MSI Digi VOX mini III", RC_MAP_MSI_DIGIVOX_III) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT, + &af9015_props, "TrekStor DVB-T USB Stick", RC_MAP_TREKSTOR) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850, + &af9015_props, "AverMedia AVerTV Volar Black HD (A850)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805, + &af9015_props, "AverMedia AVerTV Volar GPS 805 (A805)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU, + &af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810, + &af9015_props, "KWorld Digial MC-810", NULL) }, + { DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03, + &af9015_props, "Genius TVGo DVB-T03", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2, + &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T, + &af9015_props, "KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20, + &af9015_props, "Sveon STV20 Tuner USB DVB-T HDTV", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2, + &af9015_props, "DigitalNow TinyTwin v2", RC_MAP_DIGITALNOW_TINYTWIN) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS, + &af9015_props, "Leadtek WinFast DTV2000DS", RC_MAP_LEADTEK_Y04G0051) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T, + &af9015_props, "KWorld USB DVB-T Stick Mobile (UB383-T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M, + &af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC, + &af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC, + &af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T, + &af9015_props, "AverMedia AVerTV Red HD+ (A850T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3, + &af9015_props, "DigitalNow TinyTwin v3", RC_MAP_DIGITALNOW_TINYTWIN) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22, + &af9015_props, "Sveon STV22 Dual USB DVB-T Tuner HDTV", RC_MAP_MSI_DIGIVOX_III) }, + { } +}; +MODULE_DEVICE_TABLE(usb, af9015_id_table); + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver af9015_usb_driver = { + .name = KBUILD_MODNAME, + .id_table = af9015_id_table, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .reset_resume = dvb_usbv2_reset_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, +}; + +module_usb_driver(af9015_usb_driver); + +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Afatech AF9015 driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(AF9015_FIRMWARE); |