diff options
Diffstat (limited to 'drivers/media/usb/dvb-usb-v2/af9035.c')
-rw-r--r-- | drivers/media/usb/dvb-usb-v2/af9035.c | 66 |
1 files changed, 44 insertions, 22 deletions
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index b638fc1cd57..1ea17dc2a76 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -55,7 +55,7 @@ static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) || req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) { dev_err(&d->udev->dev, "%s: too much data wlen=%d rlen=%d\n", - __func__, req->wlen, req->rlen); + KBUILD_MODNAME, req->wlen, req->rlen); ret = -EINVAL; goto exit; } @@ -91,9 +91,10 @@ static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) checksum = af9035_checksum(state->buf, rlen - 2); tmp_checksum = (state->buf[rlen - 2] << 8) | state->buf[rlen - 1]; if (tmp_checksum != checksum) { - dev_err(&d->udev->dev, "%s: command=%02x checksum mismatch " \ - "(%04x != %04x)\n", KBUILD_MODNAME, req->cmd, - tmp_checksum, checksum); + dev_err(&d->udev->dev, + "%s: command=%02x checksum mismatch (%04x != %04x)\n", + KBUILD_MODNAME, req->cmd, tmp_checksum, + checksum); ret = -EIO; goto exit; } @@ -268,11 +269,29 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, memcpy(&buf[5], msg[0].buf, msg[0].len); ret = af9035_ctrl_msg(d, &req); } + } else if (num == 1 && (msg[0].flags & I2C_M_RD)) { + if (msg[0].len > 40) { + /* TODO: correct limits > 40 */ + ret = -EOPNOTSUPP; + } else { + /* I2C */ + u8 buf[5]; + struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf), + buf, msg[0].len, msg[0].buf }; + req.mbox |= ((msg[0].addr & 0x80) >> 3); + buf[0] = msg[0].len; + buf[1] = msg[0].addr << 1; + buf[2] = 0x00; /* reg addr len */ + buf[3] = 0x00; /* reg addr MSB */ + buf[4] = 0x00; /* reg addr LSB */ + ret = af9035_ctrl_msg(d, &req); + } } else { /* - * We support only two kind of I2C transactions: - * 1) 1 x read + 1 x write + * We support only three kind of I2C transactions: + * 1) 1 x read + 1 x write (repeated start) * 2) 1 x write + * 3) 1 x read */ ret = -EOPNOTSUPP; } @@ -317,8 +336,8 @@ static int af9035_identify_state(struct dvb_usb_device *d, const char **name) dev_info(&d->udev->dev, "%s: prechip_version=%02x chip_version=%02x chip_type=%04x\n", - __func__, state->prechip_version, state->chip_version, - state->chip_type); + KBUILD_MODNAME, state->prechip_version, + state->chip_version, state->chip_type); if (state->chip_type == 0x9135) { if (state->chip_version == 0x02) @@ -382,9 +401,10 @@ static int af9035_download_firmware_old(struct dvb_usb_device *d, hdr_checksum = fw->data[fw->size - i + 5] << 8; hdr_checksum |= fw->data[fw->size - i + 6] << 0; - dev_dbg(&d->udev->dev, "%s: core=%d addr=%04x data_len=%d " \ - "checksum=%04x\n", __func__, hdr_core, hdr_addr, - hdr_data_len, hdr_checksum); + dev_dbg(&d->udev->dev, + "%s: core=%d addr=%04x data_len=%d checksum=%04x\n", + __func__, hdr_core, hdr_addr, hdr_data_len, + hdr_checksum); if (((hdr_core != 1) && (hdr_core != 2)) || (hdr_data_len > i)) { @@ -489,7 +509,7 @@ static int af9035_download_firmware(struct dvb_usb_device *d, u8 rbuf[4]; u8 tmp; struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; - struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ; + struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf }; dev_dbg(&d->udev->dev, "%s:\n", __func__); /* @@ -498,11 +518,11 @@ static int af9035_download_firmware(struct dvb_usb_device *d, * which is done by master demod. * Master feeds also clock and controls power via GPIO. */ - ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_DUAL_MODE, &tmp); + ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp); if (ret < 0) goto err; - if (tmp) { + if (tmp == 1 || tmp == 3) { /* configure gpioh1, reset & power slave demod */ ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01); if (ret < 0) @@ -620,13 +640,15 @@ static int af9035_read_config(struct dvb_usb_device *d) } /* check if there is dual tuners */ - ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_DUAL_MODE, &tmp); + ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp); if (ret < 0) goto err; - state->dual_mode = tmp; - dev_dbg(&d->udev->dev, "%s: dual mode=%d\n", __func__, - state->dual_mode); + if (tmp == 1 || tmp == 3) + state->dual_mode = true; + + dev_dbg(&d->udev->dev, "%s: ts mode=%d dual mode=%d\n", __func__, + tmp, state->dual_mode); if (state->dual_mode) { /* read 2nd demodulator I2C address */ @@ -1200,9 +1222,9 @@ static int af9035_init(struct dvb_usb_device *d) { 0x80f9a4, 0x00, 0x01 }, }; - dev_dbg(&d->udev->dev, "%s: USB speed=%d frame_size=%04x " \ - "packet_size=%02x\n", __func__, - d->udev->speed, frame_size, packet_size); + dev_dbg(&d->udev->dev, + "%s: USB speed=%d frame_size=%04x packet_size=%02x\n", + __func__, d->udev->speed, frame_size, packet_size); /* init endpoints */ for (i = 0; i < ARRAY_SIZE(tab); i++) { @@ -1477,7 +1499,7 @@ static const struct usb_device_id af9035_id_table[] = { &af9035_props, "AVerMedia Twinstar (A825)", NULL) }, { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS, &af9035_props, "Asus U3100Mini Plus", NULL) }, - { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa, + { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa, &af9035_props, "TerraTec Cinergy T Stick (rev. 2)", NULL) }, /* IT9135 devices */ #if 0 |