diff options
Diffstat (limited to 'drivers/media/usb/dvb-usb/vp702x.h')
-rw-r--r-- | drivers/media/usb/dvb-usb/vp702x.h | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/drivers/media/usb/dvb-usb/vp702x.h b/drivers/media/usb/dvb-usb/vp702x.h new file mode 100644 index 00000000000..20b90055e7a --- /dev/null +++ b/drivers/media/usb/dvb-usb/vp702x.h @@ -0,0 +1,113 @@ +#ifndef _DVB_USB_VP7021_H_ +#define _DVB_USB_VP7021_H_ + +#define DVB_USB_LOG_PREFIX "vp702x" +#include "dvb-usb.h" + +extern int dvb_usb_vp702x_debug; +#define deb_info(args...) dprintk(dvb_usb_vp702x_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_vp702x_debug,0x02,args) +#define deb_rc(args...) dprintk(dvb_usb_vp702x_debug,0x04,args) +#define deb_fe(args...) dprintk(dvb_usb_vp702x_debug,0x08,args) + +/* commands are read and written with USB control messages */ + +/* consecutive read/write operation */ +#define REQUEST_OUT 0xB2 +#define REQUEST_IN 0xB3 + +/* the out-buffer of these consecutive operations contain sub-commands when b[0] = 0 + * request: 0xB2; i: 0; v: 0; b[0] = 0, b[1] = subcmd, additional buffer + * the returning buffer looks as follows + * request: 0xB3; i: 0; v: 0; b[0] = 0xB3, additional buffer */ + +#define GET_TUNER_STATUS 0x05 +/* additional in buffer: + * 0 1 2 3 4 5 6 7 8 + * N/A N/A 0x05 signal-quality N/A N/A signal-strength lock==0 N/A */ + +#define GET_SYSTEM_STRING 0x06 +/* additional in buffer: + * 0 1 2 3 4 5 6 7 8 + * N/A 'U' 'S' 'B' '7' '0' '2' 'X' N/A */ + +#define SET_DISEQC_CMD 0x08 +/* additional out buffer: + * 0 1 2 3 4 + * len X1 X2 X3 X4 + * additional in buffer: + * 0 1 2 + * N/A 0 0 b[1] == b[2] == 0 -> success, failure otherwise */ + +#define SET_LNB_POWER 0x09 +/* additional out buffer: + * 0 1 2 + * 0x00 0xff 1 = on, 0 = off + * additional in buffer: + * 0 1 2 + * N/A 0 0 b[1] == b[2] == 0 -> success failure otherwise */ + +#define GET_MAC_ADDRESS 0x0A +/* #define GET_MAC_ADDRESS 0x0B */ +/* additional in buffer: + * 0 1 2 3 4 5 6 7 8 + * N/A N/A 0x0A or 0x0B MAC0 MAC1 MAC2 MAC3 MAC4 MAC5 */ + +#define SET_PID_FILTER 0x11 +/* additional in buffer: + * 0 1 ... 14 15 16 + * PID0_MSB PID0_LSB ... PID7_MSB PID7_LSB PID_active (bits) */ + +/* request: 0xB2; i: 0; v: 0; + * b[0] != 0 -> tune and lock a channel + * 0 1 2 3 4 5 6 7 + * freq0 freq1 divstep srate0 srate1 srate2 flag chksum + */ + +/* one direction requests */ +#define READ_REMOTE_REQ 0xB4 +/* IN i: 0; v: 0; b[0] == request, b[1] == key */ + +#define READ_PID_NUMBER_REQ 0xB5 +/* IN i: 0; v: 0; b[0] == request, b[1] == 0, b[2] = pid number */ + +#define WRITE_EEPROM_REQ 0xB6 +/* OUT i: offset; v: value to write; no extra buffer */ + +#define READ_EEPROM_REQ 0xB7 +/* IN i: bufferlen; v: offset; buffer with bufferlen bytes */ + +#define READ_STATUS 0xB8 +/* IN i: 0; v: 0; bufferlen 10 */ + +#define READ_TUNER_REG_REQ 0xB9 +/* IN i: 0; v: register; b[0] = value */ + +#define READ_FX2_REG_REQ 0xBA +/* IN i: offset; v: 0; b[0] = value */ + +#define WRITE_FX2_REG_REQ 0xBB +/* OUT i: offset; v: value to write; 1 byte extra buffer */ + +#define SET_TUNER_POWER_REQ 0xBC +/* IN i: 0 = power off, 1 = power on */ + +#define WRITE_TUNER_REG_REQ 0xBD +/* IN i: register, v: value to write, no extra buffer */ + +#define RESET_TUNER 0xBE +/* IN i: 0, v: 0, no extra buffer */ + +struct vp702x_device_state { + struct mutex buf_mutex; + int buf_len; + u8 *buf; +}; + + +extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d); + +extern int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec); +extern int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); + +#endif |