diff options
Diffstat (limited to 'drivers/media/usb/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/usb/em28xx/em28xx-cards.c | 47 |
1 files changed, 31 insertions, 16 deletions
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index 50aa5a5317f..15ad4704555 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -467,6 +467,18 @@ static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { { -1, -1, -1, -1}, }; +static struct em28xx_reg_seq pctv_292e[] = { + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, + {0x0d, 0xff, 0xff, 950}, + {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, + {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, + {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, + {0x0d, 0x42, 0xff, 50}, + {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, + {-1, -1, -1, -1}, +}; + /* * Button definitions */ @@ -2220,6 +2232,17 @@ struct em28xx_board em28xx_boards[] = { .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, + /* 2013:025f PCTV tripleStick (292e). + * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */ + [EM28178_BOARD_PCTV_292E] = { + .name = "PCTV tripleStick (292e)", + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_292e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + }, }; EXPORT_SYMBOL_GPL(em28xx_boards); @@ -2397,6 +2420,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, { USB_DEVICE(0x2013, 0x0258), .driver_info = EM28178_BOARD_PCTV_461E }, + { USB_DEVICE(0x2013, 0x025f), + .driver_info = EM28178_BOARD_PCTV_292E }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -2682,8 +2707,6 @@ static void em28xx_card_setup(struct em28xx *dev) if (dev->board.is_webcam) { if (em28xx_detect_sensor(dev) < 0) dev->board.is_webcam = 0; - else - dev->progressive = 1; } switch (dev->model) { @@ -2718,11 +2741,6 @@ static void em28xx_card_setup(struct em28xx *dev) dev->board.name, dev->model); dev->tuner_type = em28xx_boards[dev->model].tuner_type; - if (em28xx_boards[dev->model].tuner_addr) - dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; - - if (em28xx_boards[dev->model].tda9887_conf) - dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; /* request some modules */ switch (dev->model) { @@ -2991,8 +3009,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, const char *chip_name = default_chip_name; dev->udev = udev; - mutex_init(&dev->vb_queue_lock); - mutex_init(&dev->vb_vbi_queue_lock); mutex_init(&dev->ctrl_urb_lock); spin_lock_init(&dev->slock); @@ -3416,15 +3432,14 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* Select USB transfer types to use */ if (has_video) { - if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) - dev->analog_xfer_bulk = 1; - em28xx_info("analog set to %s mode.\n", - dev->analog_xfer_bulk ? "bulk" : "isoc"); + if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) + dev->analog_xfer_bulk = 1; + em28xx_info("analog set to %s mode.\n", + dev->analog_xfer_bulk ? "bulk" : "isoc"); } if (has_dvb) { - if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) - dev->dvb_xfer_bulk = 1; - + if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) + dev->dvb_xfer_bulk = 1; em28xx_info("dvb set to %s mode.\n", dev->dvb_xfer_bulk ? "bulk" : "isoc"); } |