diff options
Diffstat (limited to 'drivers/media/usb/pvrusb2/pvrusb2-hdw.c')
| -rw-r--r-- | drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 5202 |
1 files changed, 5202 insertions, 0 deletions
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c new file mode 100644 index 00000000000..fb828ba1dbb --- /dev/null +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c @@ -0,0 +1,5202 @@ +/* + * + * + * Copyright (C) 2005 Mike Isely <isely@pobox.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include "pvrusb2.h" +#include "pvrusb2-std.h" +#include "pvrusb2-util.h" +#include "pvrusb2-hdw.h" +#include "pvrusb2-i2c-core.h" +#include "pvrusb2-eeprom.h" +#include "pvrusb2-hdw-internal.h" +#include "pvrusb2-encoder.h" +#include "pvrusb2-debug.h" +#include "pvrusb2-fx2-cmd.h" +#include "pvrusb2-wm8775.h" +#include "pvrusb2-video-v4l.h" +#include "pvrusb2-cx2584x-v4l.h" +#include "pvrusb2-cs53l32a.h" +#include "pvrusb2-audio.h" + +#define TV_MIN_FREQ 55250000L +#define TV_MAX_FREQ 850000000L + +/* This defines a minimum interval that the decoder must remain quiet + before we are allowed to start it running. */ +#define TIME_MSEC_DECODER_WAIT 50 + +/* This defines a minimum interval that the decoder must be allowed to run + before we can safely begin using its streaming output. */ +#define TIME_MSEC_DECODER_STABILIZATION_WAIT 300 + +/* This defines a minimum interval that the encoder must remain quiet + before we are allowed to configure it. */ +#define TIME_MSEC_ENCODER_WAIT 50 + +/* This defines the minimum interval that the encoder must successfully run + before we consider that the encoder has run at least once since its + firmware has been loaded. This measurement is in important for cases + where we can't do something until we know that the encoder has been run + at least once. */ +#define TIME_MSEC_ENCODER_OK 250 + +static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL}; +static DEFINE_MUTEX(pvr2_unit_mtx); + +static int ctlchg; +static int procreload; +static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 }; +static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; +static int video_std[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; +static int init_pause_msec; + +module_param(ctlchg, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value"); +module_param(init_pause_msec, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(init_pause_msec, "hardware initialization settling delay"); +module_param(procreload, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(procreload, + "Attempt init failure recovery with firmware reload"); +module_param_array(tuner, int, NULL, 0444); +MODULE_PARM_DESC(tuner,"specify installed tuner type"); +module_param_array(video_std, int, NULL, 0444); +MODULE_PARM_DESC(video_std,"specify initial video standard"); +module_param_array(tolerance, int, NULL, 0444); +MODULE_PARM_DESC(tolerance,"specify stream error tolerance"); + +/* US Broadcast channel 3 (61.25 MHz), to help with testing */ +static int default_tv_freq = 61250000L; +/* 104.3 MHz, a usable FM station for my area */ +static int default_radio_freq = 104300000L; + +module_param_named(tv_freq, default_tv_freq, int, 0444); +MODULE_PARM_DESC(tv_freq, "specify initial television frequency"); +module_param_named(radio_freq, default_radio_freq, int, 0444); +MODULE_PARM_DESC(radio_freq, "specify initial radio frequency"); + +#define PVR2_CTL_WRITE_ENDPOINT 0x01 +#define PVR2_CTL_READ_ENDPOINT 0x81 + +#define PVR2_GPIO_IN 0x9008 +#define PVR2_GPIO_OUT 0x900c +#define PVR2_GPIO_DIR 0x9020 + +#define trace_firmware(...) pvr2_trace(PVR2_TRACE_FIRMWARE,__VA_ARGS__) + +#define PVR2_FIRMWARE_ENDPOINT 0x02 + +/* size of a firmware chunk */ +#define FIRMWARE_CHUNK_SIZE 0x2000 + +typedef void (*pvr2_subdev_update_func)(struct pvr2_hdw *, + struct v4l2_subdev *); + +static const pvr2_subdev_update_func pvr2_module_update_functions[] = { + [PVR2_CLIENT_ID_WM8775] = pvr2_wm8775_subdev_update, + [PVR2_CLIENT_ID_SAA7115] = pvr2_saa7115_subdev_update, + [PVR2_CLIENT_ID_MSP3400] = pvr2_msp3400_subdev_update, + [PVR2_CLIENT_ID_CX25840] = pvr2_cx25840_subdev_update, + [PVR2_CLIENT_ID_CS53L32A] = pvr2_cs53l32a_subdev_update, +}; + +static const char *module_names[] = { + [PVR2_CLIENT_ID_MSP3400] = "msp3400", + [PVR2_CLIENT_ID_CX25840] = "cx25840", + [PVR2_CLIENT_ID_SAA7115] = "saa7115", + [PVR2_CLIENT_ID_TUNER] = "tuner", + [PVR2_CLIENT_ID_DEMOD] = "tuner", + [PVR2_CLIENT_ID_CS53L32A] = "cs53l32a", + [PVR2_CLIENT_ID_WM8775] = "wm8775", +}; + + +static const unsigned char *module_i2c_addresses[] = { + [PVR2_CLIENT_ID_TUNER] = "\x60\x61\x62\x63", + [PVR2_CLIENT_ID_DEMOD] = "\x43", + [PVR2_CLIENT_ID_MSP3400] = "\x40", + [PVR2_CLIENT_ID_SAA7115] = "\x21", + [PVR2_CLIENT_ID_WM8775] = "\x1b", + [PVR2_CLIENT_ID_CX25840] = "\x44", + [PVR2_CLIENT_ID_CS53L32A] = "\x11", +}; + + +static const char *ir_scheme_names[] = { + [PVR2_IR_SCHEME_NONE] = "none", + [PVR2_IR_SCHEME_29XXX] = "29xxx", + [PVR2_IR_SCHEME_24XXX] = "24xxx (29xxx emulation)", + [PVR2_IR_SCHEME_24XXX_MCE] = "24xxx (MCE device)", + [PVR2_IR_SCHEME_ZILOG] = "Zilog", +}; + + +/* Define the list of additional controls we'll dynamically construct based + on query of the cx2341x module. */ +struct pvr2_mpeg_ids { + const char *strid; + int id; +}; +static const struct pvr2_mpeg_ids mpeg_ids[] = { + { + .strid = "audio_layer", + .id = V4L2_CID_MPEG_AUDIO_ENCODING, + },{ + .strid = "audio_bitrate", + .id = V4L2_CID_MPEG_AUDIO_L2_BITRATE, + },{ + /* Already using audio_mode elsewhere :-( */ + .strid = "mpeg_audio_mode", + .id = V4L2_CID_MPEG_AUDIO_MODE, + },{ + .strid = "mpeg_audio_mode_extension", + .id = V4L2_CID_MPEG_AUDIO_MODE_EXTENSION, + },{ + .strid = "audio_emphasis", + .id = V4L2_CID_MPEG_AUDIO_EMPHASIS, + },{ + .strid = "audio_crc", + .id = V4L2_CID_MPEG_AUDIO_CRC, + },{ + .strid = "video_aspect", + .id = V4L2_CID_MPEG_VIDEO_ASPECT, + },{ + .strid = "video_b_frames", + .id = V4L2_CID_MPEG_VIDEO_B_FRAMES, + },{ + .strid = "video_gop_size", + .id = V4L2_CID_MPEG_VIDEO_GOP_SIZE, + },{ + .strid = "video_gop_closure", + .id = V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, + },{ + .strid = "video_bitrate_mode", + .id = V4L2_CID_MPEG_VIDEO_BITRATE_MODE, + },{ + .strid = "video_bitrate", + .id = V4L2_CID_MPEG_VIDEO_BITRATE, + },{ + .strid = "video_bitrate_peak", + .id = V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, + },{ + .strid = "video_temporal_decimation", + .id = V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, + },{ + .strid = "stream_type", + .id = V4L2_CID_MPEG_STREAM_TYPE, + },{ + .strid = "video_spatial_filter_mode", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE, + },{ + .strid = "video_spatial_filter", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER, + },{ + .strid = "video_luma_spatial_filter_type", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE, + },{ + .strid = "video_chroma_spatial_filter_type", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE, + },{ + .strid = "video_temporal_filter_mode", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE, + },{ + .strid = "video_temporal_filter", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER, + },{ + .strid = "video_median_filter_type", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE, + },{ + .strid = "video_luma_median_filter_top", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP, + },{ + .strid = "video_luma_median_filter_bottom", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM, + },{ + .strid = "video_chroma_median_filter_top", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP, + },{ + .strid = "video_chroma_median_filter_bottom", + .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM, + } +}; +#define MPEGDEF_COUNT ARRAY_SIZE(mpeg_ids) + + +static const char *control_values_srate[] = { + [V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100] = "44.1 kHz", + [V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000] = "48 kHz", + [V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000] = "32 kHz", +}; + + + +static const char *control_values_input[] = { + [PVR2_CVAL_INPUT_TV] = "television", /*xawtv needs this name*/ + [PVR2_CVAL_INPUT_DTV] = "dtv", + [PVR2_CVAL_INPUT_RADIO] = "radio", + [PVR2_CVAL_INPUT_SVIDEO] = "s-video", + [PVR2_CVAL_INPUT_COMPOSITE] = "composite", +}; + + +static const char *control_values_audiomode[] = { + [V4L2_TUNER_MODE_MONO] = "Mono", + [V4L2_TUNER_MODE_STEREO] = "Stereo", + [V4L2_TUNER_MODE_LANG1] = "Lang1", + [V4L2_TUNER_MODE_LANG2] = "Lang2", + [V4L2_TUNER_MODE_LANG1_LANG2] = "Lang1+Lang2", +}; + + +static const char *control_values_hsm[] = { + [PVR2_CVAL_HSM_FAIL] = "Fail", + [PVR2_CVAL_HSM_HIGH] = "High", + [PVR2_CVAL_HSM_FULL] = "Full", +}; + + +static const char *pvr2_state_names[] = { + [PVR2_STATE_NONE] = "none", + [PVR2_STATE_DEAD] = "dead", + [PVR2_STATE_COLD] = "cold", + [PVR2_STATE_WARM] = "warm", + [PVR2_STATE_ERROR] = "error", + [PVR2_STATE_READY] = "ready", + [PVR2_STATE_RUN] = "run", +}; + + +struct pvr2_fx2cmd_descdef { + unsigned char id; + unsigned char *desc; +}; + +static const struct pvr2_fx2cmd_descdef pvr2_fx2cmd_desc[] = { + {FX2CMD_MEM_WRITE_DWORD, "write encoder dword"}, + {FX2CMD_MEM_READ_DWORD, "read encoder dword"}, + {FX2CMD_HCW_ZILOG_RESET, "zilog IR reset control"}, + {FX2CMD_MEM_READ_64BYTES, "read encoder 64bytes"}, + {FX2CMD_REG_WRITE, "write encoder register"}, + {FX2CMD_REG_READ, "read encoder register"}, + {FX2CMD_MEMSEL, "encoder memsel"}, + {FX2CMD_I2C_WRITE, "i2c write"}, + {FX2CMD_I2C_READ, "i2c read"}, + {FX2CMD_GET_USB_SPEED, "get USB speed"}, + {FX2CMD_STREAMING_ON, "stream on"}, + {FX2CMD_STREAMING_OFF, "stream off"}, + {FX2CMD_FWPOST1, "fwpost1"}, + {FX2CMD_POWER_OFF, "power off"}, + {FX2CMD_POWER_ON, "power on"}, + {FX2CMD_DEEP_RESET, "deep reset"}, + {FX2CMD_GET_EEPROM_ADDR, "get rom addr"}, + {FX2CMD_GET_IR_CODE, "get IR code"}, + {FX2CMD_HCW_DEMOD_RESETIN, "hcw demod resetin"}, + {FX2CMD_HCW_DTV_STREAMING_ON, "hcw dtv stream on"}, + {FX2CMD_HCW_DTV_STREAMING_OFF, "hcw dtv stream off"}, + {FX2CMD_ONAIR_DTV_STREAMING_ON, "onair dtv stream on"}, + {FX2CMD_ONAIR_DTV_STREAMING_OFF, "onair dtv stream off"}, + {FX2CMD_ONAIR_DTV_POWER_ON, "onair dtv power on"}, + {FX2CMD_ONAIR_DTV_POWER_OFF, "onair dtv power off"}, +}; + + +static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v); +static void pvr2_hdw_state_sched(struct pvr2_hdw *); +static int pvr2_hdw_state_eval(struct pvr2_hdw *); +static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *,unsigned long); +static void pvr2_hdw_worker_poll(struct work_struct *work); +static int pvr2_hdw_wait(struct pvr2_hdw *,int state); +static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *); +static void pvr2_hdw_state_log_state(struct pvr2_hdw *); +static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl); +static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw); +static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw); +static void pvr2_hdw_quiescent_timeout(unsigned long); +static void pvr2_hdw_decoder_stabilization_timeout(unsigned long); +static void pvr2_hdw_encoder_wait_timeout(unsigned long); +static void pvr2_hdw_encoder_run_timeout(unsigned long); +static int pvr2_issue_simple_cmd(struct pvr2_hdw *,u32); +static int pvr2_send_request_ex(struct pvr2_hdw *hdw, + unsigned int timeout,int probe_fl, + void *write_data,unsigned int write_len, + void *read_data,unsigned int read_len); +static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw); +static v4l2_std_id pvr2_hdw_get_detected_std(struct pvr2_hdw *hdw); + +static void trace_stbit(const char *name,int val) +{ + pvr2_trace(PVR2_TRACE_STBITS, + "State bit %s <-- %s", + name,(val ? "true" : "false")); +} + +static int ctrl_channelfreq_get(struct pvr2_ctrl *cptr,int *vp) +{ + struct pvr2_hdw *hdw = cptr->hdw; + if ((hdw->freqProgSlot > 0) && (hdw->freqProgSlot <= FREQTABLE_SIZE)) { + *vp = hdw->freqTable[hdw->freqProgSlot-1]; + } else { + *vp = 0; + } + return 0; +} + +static int ctrl_channelfreq_set(struct pvr2_ctrl *cptr,int m,int v) +{ + struct pvr2_hdw *hdw = cptr->hdw; + unsigned int slotId = hdw->freqProgSlot; + if ((slotId > 0) && (slotId <= FREQTABLE_SIZE)) { + hdw->freqTable[slotId-1] = v; + /* Handle side effects correctly - if we're tuned to this + slot, then forgot the slot id relation since the stored + frequency has been changed. */ + if (hdw->freqSelector) { + if (hdw->freqSlotRadio == slotId) { + hdw->freqSlotRadio = 0; + } + } else { + if (hdw->freqSlotTelevision == slotId) { + hdw->freqSlotTelevision = 0; + } + } + } + return 0; +} + +static int ctrl_channelprog_get(struct pvr2_ctrl *cptr,int *vp) +{ + *vp = cptr->hdw->freqProgSlot; + return 0; +} + +static int ctrl_channelprog_set(struct pvr2_ctrl *cptr,int m,int v) +{ + struct pvr2_hdw *hdw = cptr->hdw; + if ((v >= 0) && (v <= FREQTABLE_SIZE)) { + hdw->freqProgSlot = v; + } + return 0; +} + +static int ctrl_channel_get(struct pvr2_ctrl *cptr,int *vp) +{ + struct pvr2_hdw *hdw = cptr->hdw; + *vp = hdw->freqSelector ? hdw->freqSlotRadio : hdw->freqSlotTelevision; + return 0; +} + +static int ctrl_channel_set(struct pvr2_ctrl *cptr,int m,int slotId) +{ + unsigned freq = 0; + struct pvr2_hdw *hdw = cptr->hdw; + if ((slotId < 0) || (slotId > FREQTABLE_SIZE)) return 0; + if (slotId > 0) { + freq = hdw->freqTable[slotId-1]; + if (!freq) return 0; + pvr2_hdw_set_cur_freq(hdw,freq); + } + if (hdw->freqSelector) { + hdw->freqSlotRadio = slotId; + } else { + hdw->freqSlotTelevision = slotId; + } + return 0; +} + +static int ctrl_freq_get(struct pvr2_ctrl *cptr,int *vp) +{ + *vp = pvr2_hdw_get_cur_freq(cptr->hdw); + return 0; +} + +static int ctrl_freq_is_dirty(struct pvr2_ctrl *cptr) +{ + return cptr->hdw->freqDirty != 0; +} + +static void ctrl_freq_clear_dirty(struct pvr2_ctrl *cptr) +{ + cptr->hdw->freqDirty = 0; +} + +static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v) +{ + pvr2_hdw_set_cur_freq(cptr->hdw,v); + return 0; +} + +static int ctrl_cropl_min_get(struct pvr2_ctrl *cptr, int *left) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *left = cap->bounds.left; + return 0; +} + +static int ctrl_cropl_max_get(struct pvr2_ctrl *cptr, int *left) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *left = cap->bounds.left; + if (cap->bounds.width > cptr->hdw->cropw_val) { + *left += cap->bounds.width - cptr->hdw->cropw_val; + } + return 0; +} + +static int ctrl_cropt_min_get(struct pvr2_ctrl *cptr, int *top) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *top = cap->bounds.top; + return 0; +} + +static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *top = cap->bounds.top; + if (cap->bounds.height > cptr->hdw->croph_val) { + *top += cap->bounds.height - cptr->hdw->croph_val; + } + return 0; +} + +static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *width) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat, bleftend, cleft; + + stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + bleftend = cap->bounds.left+cap->bounds.width; + cleft = cptr->hdw->cropl_val; + + *width = cleft < bleftend ? bleftend-cleft : 0; + return 0; +} + +static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *height) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat, btopend, ctop; + + stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + btopend = cap->bounds.top+cap->bounds.height; + ctop = cptr->hdw->cropt_val; + + *height = ctop < btopend ? btopend-ctop : 0; + return 0; +} + +static int ctrl_get_cropcapbl(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->bounds.left; + return 0; +} + +static int ctrl_get_cropcapbt(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->bounds.top; + return 0; +} + +static int ctrl_get_cropcapbw(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->bounds.width; + return 0; +} + +static int ctrl_get_cropcapbh(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->bounds.height; + return 0; +} + +static int ctrl_get_cropcapdl(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->defrect.left; + return 0; +} + +static int ctrl_get_cropcapdt(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->defrect.top; + return 0; +} + +static int ctrl_get_cropcapdw(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->defrect.width; + return 0; +} + +static int ctrl_get_cropcapdh(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->defrect.height; + return 0; +} + +static int ctrl_get_cropcappan(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->pixelaspect.numerator; + return 0; +} + +static int ctrl_get_cropcappad(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->pixelaspect.denominator; + return 0; +} + +static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) +{ + /* Actual maximum depends on the video standard in effect. */ + if (cptr->hdw->std_mask_cur & V4L2_STD_525_60) { + *vp = 480; + } else { + *vp = 576; + } + return 0; +} + +static int ctrl_vres_min_get(struct pvr2_ctrl *cptr,int *vp) +{ + /* Actual minimum depends on device digitizer type. */ + if (cptr->hdw->hdw_desc->flag_has_cx25840) { + *vp = 75; + } else { + *vp = 17; + } + return 0; +} + +static int ctrl_get_input(struct pvr2_ctrl *cptr,int *vp) +{ + *vp = cptr->hdw->input_val; + return 0; +} + +static int ctrl_check_input(struct pvr2_ctrl *cptr,int v) +{ + return ((1 << v) & cptr->hdw->input_allowed_mask) != 0; +} + +static int ctrl_set_input(struct pvr2_ctrl *cptr,int m,int v) +{ + return pvr2_hdw_set_input(cptr->hdw,v); +} + +static int ctrl_isdirty_input(struct pvr2_ctrl *cptr) +{ + return cptr->hdw->input_dirty != 0; +} + +static void ctrl_cleardirty_input(struct pvr2_ctrl *cptr) +{ + cptr->hdw->input_dirty = 0; +} + + +static int ctrl_freq_max_get(struct pvr2_ctrl *cptr, int *vp) +{ + unsigned long fv; + struct pvr2_hdw *hdw = cptr->hdw; + if (hdw->tuner_signal_stale) { + pvr2_hdw_status_poll(hdw); + } + fv = hdw->tuner_signal_info.rangehigh; + if (!fv) { + /* Safety fallback */ + *vp = TV_MAX_FREQ; + return 0; + } + if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) { + fv = (fv * 125) / 2; + } else { + fv = fv * 62500; + } + *vp = fv; + return 0; +} + +static int ctrl_freq_min_get(struct pvr2_ctrl *cptr, int *vp) +{ + unsigned long fv; + struct pvr2_hdw *hdw = cptr->hdw; + if (hdw->tuner_signal_stale) { + pvr2_hdw_status_poll(hdw); + } + fv = hdw->tuner_signal_info.rangelow; + if (!fv) { + /* Safety fallback */ + *vp = TV_MIN_FREQ; + return 0; + } + if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) { + fv = (fv * 125) / 2; + } else { + fv = fv * 62500; + } + *vp = fv; + return 0; +} + +static int ctrl_cx2341x_is_dirty(struct pvr2_ctrl *cptr) +{ + return cptr->hdw->enc_stale != 0; +} + +static void ctrl_cx2341x_clear_dirty(struct pvr2_ctrl *cptr) +{ + cptr->hdw->enc_stale = 0; + cptr->hdw->enc_unsafe_stale = 0; +} + +static int ctrl_cx2341x_get(struct pvr2_ctrl *cptr,int *vp) +{ + int ret; + struct v4l2_ext_controls cs; + struct v4l2_ext_control c1; + memset(&cs,0,sizeof(cs)); + memset(&c1,0,sizeof(c1)); + cs.controls = &c1; + cs.count = 1; + c1.id = cptr->info->v4l_id; + ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state, 0, &cs, + VIDIOC_G_EXT_CTRLS); + if (ret) return ret; + *vp = c1.value; + return 0; +} + +static int ctrl_cx2341x_set(struct pvr2_ctrl *cptr,int m,int v) +{ + int ret; + struct pvr2_hdw *hdw = cptr->hdw; + struct v4l2_ext_controls cs; + struct v4l2_ext_control c1; + memset(&cs,0,sizeof(cs)); + memset(&c1,0,sizeof(c1)); + cs.controls = &c1; + cs.count = 1; + c1.id = cptr->info->v4l_id; + c1.value = v; + ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state, + hdw->state_encoder_run, &cs, + VIDIOC_S_EXT_CTRLS); + if (ret == -EBUSY) { + /* Oops. cx2341x is telling us it's not safe to change + this control while we're capturing. Make a note of this + fact so that the pipeline will be stopped the next time + controls are committed. Then go on ahead and store this + change anyway. */ + ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state, + 0, &cs, + VIDIOC_S_EXT_CTRLS); + if (!ret) hdw->enc_unsafe_stale = !0; + } + if (ret) return ret; + hdw->enc_stale = !0; + return 0; +} + +static unsigned int ctrl_cx2341x_getv4lflags(struct pvr2_ctrl *cptr) +{ + struct v4l2_queryctrl qctrl; + struct pvr2_ctl_info *info; + qctrl.id = cptr->info->v4l_id; + cx2341x_ctrl_query(&cptr->hdw->enc_ctl_state,&qctrl); + /* Strip out the const so we can adjust a function pointer. It's + OK to do this here because we know this is a dynamically created + control, so the underlying storage for the info pointer is (a) + private to us, and (b) not in read-only storage. Either we do + this or we significantly complicate the underlying control + implementation. */ + info = (struct pvr2_ctl_info *)(cptr->info); + if (qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY) { + if (info->set_value) { + info->set_value = NULL; + } + } else { + if (!(info->set_value)) { + info->set_value = ctrl_cx2341x_set; + } + } + return qctrl.flags; +} + +static int ctrl_streamingenabled_get(struct pvr2_ctrl *cptr,int *vp) +{ + *vp = cptr->hdw->state_pipeline_req; + return 0; +} + +static int ctrl_masterstate_get(struct pvr2_ctrl *cptr,int *vp) +{ + *vp = cptr->hdw->master_state; + return 0; +} + +static int ctrl_hsm_get(struct pvr2_ctrl *cptr,int *vp) +{ + int result = pvr2_hdw_is_hsm(cptr->hdw); + *vp = PVR2_CVAL_HSM_FULL; + if (result < 0) *vp = PVR2_CVAL_HSM_FAIL; + if (result) *vp = PVR2_CVAL_HSM_HIGH; + return 0; +} + +static int ctrl_stddetect_get(struct pvr2_ctrl *cptr, int *vp) +{ + *vp = pvr2_hdw_get_detected_std(cptr->hdw); + return 0; +} + +static int ctrl_stdavail_get(struct pvr2_ctrl *cptr,int *vp) +{ + *vp = cptr->hdw->std_mask_avail; + return 0; +} + +static int ctrl_stdavail_set(struct pvr2_ctrl *cptr,int m,int v) +{ + struct pvr2_hdw *hdw = cptr->hdw; + v4l2_std_id ns; + ns = hdw->std_mask_avail; + ns = (ns & ~m) | (v & m); + if (ns == hdw->std_mask_avail) return 0; + hdw->std_mask_avail = ns; + hdw->std_info_cur.def.type_bitmask.valid_bits = hdw->std_mask_avail; + return 0; +} + +static int ctrl_std_val_to_sym(struct pvr2_ctrl *cptr,int msk,int val, + char *bufPtr,unsigned int bufSize, + unsigned int *len) +{ + *len = pvr2_std_id_to_str(bufPtr,bufSize,msk & val); + return 0; +} + +static int ctrl_std_sym_to_val(struct pvr2_ctrl *cptr, + const char *bufPtr,unsigned int bufSize, + int *mskp,int *valp) +{ + int ret; + v4l2_std_id id; + ret = pvr2_std_str_to_id(&id,bufPtr,bufSize); + if (ret < 0) return ret; + if (mskp) *mskp = id; + if (valp) *valp = id; + return 0; +} + +static int ctrl_stdcur_get(struct pvr2_ctrl *cptr,int *vp) +{ + *vp = cptr->hdw->std_mask_cur; + return 0; +} + +static int ctrl_stdcur_set(struct pvr2_ctrl *cptr,int m,int v) +{ + struct pvr2_hdw *hdw = cptr->hdw; + v4l2_std_id ns; + ns = hdw->std_mask_cur; + ns = (ns & ~m) | (v & m); + if (ns == hdw->std_mask_cur) return 0; + hdw->std_mask_cur = ns; + hdw->std_dirty = !0; + return 0; +} + +static int ctrl_stdcur_is_dirty(struct pvr2_ctrl *cptr) +{ + return cptr->hdw->std_dirty != 0; +} + +static void ctrl_stdcur_clear_dirty(struct pvr2_ctrl *cptr) +{ + cptr->hdw->std_dirty = 0; +} + +static int ctrl_signal_get(struct pvr2_ctrl *cptr,int *vp) +{ + struct pvr2_hdw *hdw = cptr->hdw; + pvr2_hdw_status_poll(hdw); + *vp = hdw->tuner_signal_info.signal; + return 0; +} + +static int ctrl_audio_modes_present_get(struct pvr2_ctrl *cptr,int *vp) +{ + int val = 0; + unsigned int subchan; + struct pvr2_hdw *hdw = cptr->hdw; + pvr2_hdw_status_poll(hdw); + subchan = hdw->tuner_signal_info.rxsubchans; + if (subchan & V4L2_TUNER_SUB_MONO) { + val |= (1 << V4L2_TUNER_MODE_MONO); + } + if (subchan & V4L2_TUNER_SUB_STEREO) { + val |= (1 << V4L2_TUNER_MODE_STEREO); + } + if (subchan & V4L2_TUNER_SUB_LANG1) { + val |= (1 << V4L2_TUNER_MODE_LANG1); + } + if (subchan & V4L2_TUNER_SUB_LANG2) { + val |= (1 << V4L2_TUNER_MODE_LANG2); + } + *vp = val; + return 0; +} + + +#define DEFINT(vmin,vmax) \ + .type = pvr2_ctl_int, \ + .def.type_int.min_value = vmin, \ + .def.type_int.max_value = vmax + +#define DEFENUM(tab) \ + .type = pvr2_ctl_enum, \ + .def.type_enum.count = ARRAY_SIZE(tab), \ + .def.type_enum.value_names = tab + +#define DEFBOOL \ + .type = pvr2_ctl_bool + +#define DEFMASK(msk,tab) \ + .type = pvr2_ctl_bitmask, \ + .def.type_bitmask.valid_bits = msk, \ + .def.type_bitmask.bit_names = tab + +#define DEFREF(vname) \ + .set_value = ctrl_set_##vname, \ + .get_value = ctrl_get_##vname, \ + .is_dirty = ctrl_isdirty_##vname, \ + .clear_dirty = ctrl_cleardirty_##vname + + +#define VCREATE_FUNCS(vname) \ +static int ctrl_get_##vname(struct pvr2_ctrl *cptr,int *vp) \ +{*vp = cptr->hdw->vname##_val; return 0;} \ +static int ctrl_set_##vname(struct pvr2_ctrl *cptr,int m,int v) \ +{cptr->hdw->vname##_val = v; cptr->hdw->vname##_dirty = !0; return 0;} \ +static int ctrl_isdirty_##vname(struct pvr2_ctrl *cptr) \ +{return cptr->hdw->vname##_dirty != 0;} \ +static void ctrl_cleardirty_##vname(struct pvr2_ctrl *cptr) \ +{cptr->hdw->vname##_dirty = 0;} + +VCREATE_FUNCS(brightness) +VCREATE_FUNCS(contrast) +VCREATE_FUNCS(saturation) +VCREATE_FUNCS(hue) +VCREATE_FUNCS(volume) +VCREATE_FUNCS(balance) +VCREATE_FUNCS(bass) +VCREATE_FUNCS(treble) +VCREATE_FUNCS(mute) +VCREATE_FUNCS(cropl) +VCREATE_FUNCS(cropt) +VCREATE_FUNCS(cropw) +VCREATE_FUNCS(croph) +VCREATE_FUNCS(audiomode) +VCREATE_FUNCS(res_hor) +VCREATE_FUNCS(res_ver) +VCREATE_FUNCS(srate) + +/* Table definition of all controls which can be manipulated */ +static const struct pvr2_ctl_info control_defs[] = { + { + .v4l_id = V4L2_CID_BRIGHTNESS, + .desc = "Brightness", + .name = "brightness", + .default_value = 128, + DEFREF(brightness), + DEFINT(0,255), + },{ + .v4l_id = V4L2_CID_CONTRAST, + .desc = "Contrast", + .name = "contrast", + .default_value = 68, + DEFREF(contrast), + DEFINT(0,127), + },{ + .v4l_id = V4L2_CID_SATURATION, + .desc = "Saturation", + .name = "saturation", + .default_value = 64, + DEFREF(saturation), + DEFINT(0,127), + },{ + .v4l_id = V4L2_CID_HUE, + .desc = "Hue", + .name = "hue", + .default_value = 0, + DEFREF(hue), + DEFINT(-128,127), + },{ + .v4l_id = V4L2_CID_AUDIO_VOLUME, + .desc = "Volume", + .name = "volume", + .default_value = 62000, + DEFREF(volume), + DEFINT(0,65535), + },{ + .v4l_id = V4L2_CID_AUDIO_BALANCE, + .desc = "Balance", + .name = "balance", + .default_value = 0, + DEFREF(balance), + DEFINT(-32768,32767), + },{ + .v4l_id = V4L2_CID_AUDIO_BASS, + .desc = "Bass", + .name = "bass", + .default_value = 0, + DEFREF(bass), + DEFINT(-32768,32767), + },{ + .v4l_id = V4L2_CID_AUDIO_TREBLE, + .desc = "Treble", + .name = "treble", + .default_value = 0, + DEFREF(treble), + DEFINT(-32768,32767), + },{ + .v4l_id = V4L2_CID_AUDIO_MUTE, + .desc = "Mute", + .name = "mute", + .default_value = 0, + DEFREF(mute), + DEFBOOL, + }, { + .desc = "Capture crop left margin", + .name = "crop_left", + .internal_id = PVR2_CID_CROPL, + .default_value = 0, + DEFREF(cropl), + DEFINT(-129, 340), + .get_min_value = ctrl_cropl_min_get, + .get_max_value = ctrl_cropl_max_get, + .get_def_value = ctrl_get_cropcapdl, + }, { + .desc = "Capture crop top margin", + .name = "crop_top", + .internal_id = PVR2_CID_CROPT, + .default_value = 0, + DEFREF(cropt), + DEFINT(-35, 544), + .get_min_value = ctrl_cropt_min_get, + .get_max_value = ctrl_cropt_max_get, + .get_def_value = ctrl_get_cropcapdt, + }, { + .desc = "Capture crop width", + .name = "crop_width", + .internal_id = PVR2_CID_CROPW, + .default_value = 720, + DEFREF(cropw), + DEFINT(0, 864), + .get_max_value = ctrl_cropw_max_get, + .get_def_value = ctrl_get_cropcapdw, + }, { + .desc = "Capture crop height", + .name = "crop_height", + .internal_id = PVR2_CID_CROPH, + .default_value = 480, + DEFREF(croph), + DEFINT(0, 576), + .get_max_value = ctrl_croph_max_get, + .get_def_value = ctrl_get_cropcapdh, + }, { + .desc = "Capture capability pixel aspect numerator", + .name = "cropcap_pixel_numerator", + .internal_id = PVR2_CID_CROPCAPPAN, + .get_value = ctrl_get_cropcappan, + }, { + .desc = "Capture capability pixel aspect denominator", + .name = "cropcap_pixel_denominator", + .internal_id = PVR2_CID_CROPCAPPAD, + .get_value = ctrl_get_cropcappad, + }, { + .desc = "Capture capability bounds top", + .name = "cropcap_bounds_top", + .internal_id = PVR2_CID_CROPCAPBT, + .get_value = ctrl_get_cropcapbt, + }, { + .desc = "Capture capability bounds left", + .name = "cropcap_bounds_left", + .internal_id = PVR2_CID_CROPCAPBL, + .get_value = ctrl_get_cropcapbl, + }, { + .desc = "Capture capability bounds width", + .name = "cropcap_bounds_width", + .internal_id = PVR2_CID_CROPCAPBW, + .get_value = ctrl_get_cropcapbw, + }, { + .desc = "Capture capability bounds height", + .name = "cropcap_bounds_height", + .internal_id = PVR2_CID_CROPCAPBH, + .get_value = ctrl_get_cropcapbh, + },{ + .desc = "Video Source", + .name = "input", + .internal_id = PVR2_CID_INPUT, + .default_value = PVR2_CVAL_INPUT_TV, + .check_value = ctrl_check_input, + DEFREF(input), + DEFENUM(control_values_input), + },{ + .desc = "Audio Mode", + .name = "audio_mode", + .internal_id = PVR2_CID_AUDIOMODE, + .default_value = V4L2_TUNER_MODE_STEREO, + DEFREF(audiomode), + DEFENUM(control_values_audiomode), + },{ + .desc = "Horizontal capture resolution", + .name = "resolution_hor", + .internal_id = PVR2_CID_HRES, + .default_value = 720, + DEFREF(res_hor), + DEFINT(19,720), + },{ + .desc = "Vertical capture resolution", + .name = "resolution_ver", + .internal_id = PVR2_CID_VRES, + .default_value = 480, + DEFREF(res_ver), + DEFINT(17,576), + /* Hook in check for video standard and adjust maximum + depending on the standard. */ + .get_max_value = ctrl_vres_max_get, + .get_min_value = ctrl_vres_min_get, + },{ + .v4l_id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ, + .default_value = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, + .desc = "Audio Sampling Frequency", + .name = "srate", + DEFREF(srate), + DEFENUM(control_values_srate), + },{ + .desc = "Tuner Frequency (Hz)", + .name = "frequency", + .internal_id = PVR2_CID_FREQUENCY, + .default_value = 0, + .set_value = ctrl_freq_set, + .get_value = ctrl_freq_get, + .is_dirty = ctrl_freq_is_dirty, + .clear_dirty = ctrl_freq_clear_dirty, + DEFINT(0,0), + /* Hook in check for input value (tv/radio) and adjust + max/min values accordingly */ + .get_max_value = ctrl_freq_max_get, + .get_min_value = ctrl_freq_min_get, + },{ + .desc = "Channel", + .name = "channel", + .set_value = ctrl_channel_set, + .get_value = ctrl_channel_get, + DEFINT(0,FREQTABLE_SIZE), + },{ + .desc = "Channel Program Frequency", + .name = "freq_table_value", + .set_value = ctrl_channelfreq_set, + .get_value = ctrl_channelfreq_get, + DEFINT(0,0), + /* Hook in check for input value (tv/radio) and adjust + max/min values accordingly */ + .get_max_value = ctrl_freq_max_get, + .get_min_value = ctrl_freq_min_get, + },{ + .desc = "Channel Program ID", + .name = "freq_table_channel", + .set_value = ctrl_channelprog_set, + .get_value = ctrl_channelprog_get, + DEFINT(0,FREQTABLE_SIZE), + },{ + .desc = "Streaming Enabled", + .name = "streaming_enabled", + .get_value = ctrl_streamingenabled_get, + DEFBOOL, + },{ + .desc = "USB Speed", + .name = "usb_speed", + .get_value = ctrl_hsm_get, + DEFENUM(control_values_hsm), + },{ + .desc = "Master State", + .name = "master_state", + .get_value = ctrl_masterstate_get, + DEFENUM(pvr2_state_names), + },{ + .desc = "Signal Present", + .name = "signal_present", + .get_value = ctrl_signal_get, + DEFINT(0,65535), + },{ + .desc = "Audio Modes Present", + .name = "audio_modes_present", + .get_value = ctrl_audio_modes_present_get, + /* For this type we "borrow" the V4L2_TUNER_MODE enum from + v4l. Nothing outside of this module cares about this, + but I reuse it in order to also reuse the + control_values_audiomode string table. */ + DEFMASK(((1 << V4L2_TUNER_MODE_MONO)| + (1 << V4L2_TUNER_MODE_STEREO)| + (1 << V4L2_TUNER_MODE_LANG1)| + (1 << V4L2_TUNER_MODE_LANG2)), + control_values_audiomode), + },{ + .desc = "Video Standards Available Mask", + .name = "video_standard_mask_available", + .internal_id = PVR2_CID_STDAVAIL, + .skip_init = !0, + .get_value = ctrl_stdavail_get, + .set_value = ctrl_stdavail_set, + .val_to_sym = ctrl_std_val_to_sym, + .sym_to_val = ctrl_std_sym_to_val, + .type = pvr2_ctl_bitmask, + },{ + .desc = "Video Standards In Use Mask", + .name = "video_standard_mask_active", + .internal_id = PVR2_CID_STDCUR, + .skip_init = !0, + .get_value = ctrl_stdcur_get, + .set_value = ctrl_stdcur_set, + .is_dirty = ctrl_stdcur_is_dirty, + .clear_dirty = ctrl_stdcur_clear_dirty, + .val_to_sym = ctrl_std_val_to_sym, + .sym_to_val = ctrl_std_sym_to_val, + .type = pvr2_ctl_bitmask, + },{ + .desc = "Video Standards Detected Mask", + .name = "video_standard_mask_detected", + .internal_id = PVR2_CID_STDDETECT, + .skip_init = !0, + .get_value = ctrl_stddetect_get, + .val_to_sym = ctrl_std_val_to_sym, + .sym_to_val = ctrl_std_sym_to_val, + .type = pvr2_ctl_bitmask, + } +}; + +#define CTRLDEF_COUNT ARRAY_SIZE(control_defs) + + +const char *pvr2_config_get_name(enum pvr2_config cfg) +{ + switch (cfg) { + case pvr2_config_empty: return "empty"; + case pvr2_config_mpeg: return "mpeg"; + case pvr2_config_vbi: return "vbi"; + case pvr2_config_pcm: return "pcm"; + case pvr2_config_rawvideo: return "raw video"; + } + return "<unknown>"; +} + + +struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *hdw) +{ + return hdw->usb_dev; +} + + +unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *hdw) +{ + return hdw->serial_number; +} + + +const char *pvr2_hdw_get_bus_info(struct pvr2_hdw *hdw) +{ + return hdw->bus_info; +} + + +const char *pvr2_hdw_get_device_identifier(struct pvr2_hdw *hdw) +{ + return hdw->identifier; +} + + +unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *hdw) +{ + return hdw->freqSelector ? hdw->freqValTelevision : hdw->freqValRadio; +} + +/* Set the currently tuned frequency and account for all possible + driver-core side effects of this action. */ +static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *hdw,unsigned long val) +{ + if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { + if (hdw->freqSelector) { + /* Swing over to radio frequency selection */ + hdw->freqSelector = 0; + hdw->freqDirty = !0; + } + if (hdw->freqValRadio != val) { + hdw->freqValRadio = val; + hdw->freqSlotRadio = 0; + hdw->freqDirty = !0; + } + } else { + if (!(hdw->freqSelector)) { + /* Swing over to television frequency selection */ + hdw->freqSelector = 1; + hdw->freqDirty = !0; + } + if (hdw->freqValTelevision != val) { + hdw->freqValTelevision = val; + hdw->freqSlotTelevision = 0; + hdw->freqDirty = !0; + } + } +} + +int pvr2_hdw_get_unit_number(struct pvr2_hdw *hdw) +{ + return hdw->unit_number; +} + + +/* Attempt to locate one of the given set of files. Messages are logged + appropriate to what has been found. The return value will be 0 or + greater on success (it will be the index of the file name found) and + fw_entry will be filled in. Otherwise a negative error is returned on + failure. If the return value is -ENOENT then no viable firmware file + could be located. */ +static int pvr2_locate_firmware(struct pvr2_hdw *hdw, + const struct firmware **fw_entry, + const char *fwtypename, + unsigned int fwcount, + const char *fwnames[]) +{ + unsigned int idx; + int ret = -EINVAL; + for (idx = 0; idx < fwcount; idx++) { + ret = request_firmware(fw_entry, + fwnames[idx], + &hdw->usb_dev->dev); + if (!ret) { + trace_firmware("Located %s firmware: %s;" + " uploading...", + fwtypename, + fwnames[idx]); + return idx; + } + if (ret == -ENOENT) continue; + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "request_firmware fatal error with code=%d",ret); + return ret; + } + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "***WARNING***" + " Device %s firmware" + " seems to be missing.", + fwtypename); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Did you install the pvrusb2 firmware files" + " in their proper location?"); + if (fwcount == 1) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "request_firmware unable to locate %s file %s", + fwtypename,fwnames[0]); + } else { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "request_firmware unable to locate" + " one of the following %s files:", + fwtypename); + for (idx = 0; idx < fwcount; idx++) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "request_firmware: Failed to find %s", + fwnames[idx]); + } + } + return ret; +} + + +/* + * pvr2_upload_firmware1(). + * + * Send the 8051 firmware to the device. After the upload, arrange for + * device to re-enumerate. + * + * NOTE : the pointer to the firmware data given by request_firmware() + * is not suitable for an usb transaction. + * + */ +static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) +{ + const struct firmware *fw_entry = NULL; + void *fw_ptr; + unsigned int pipe; + unsigned int fwsize; + int ret; + u16 address; + + if (!hdw->hdw_desc->fx2_firmware.cnt) { + hdw->fw1_state = FW1_STATE_OK; + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Connected device type defines" + " no firmware to upload; ignoring firmware"); + return -ENOTTY; + } + + hdw->fw1_state = FW1_STATE_FAILED; // default result + + trace_firmware("pvr2_upload_firmware1"); + + ret = pvr2_locate_firmware(hdw,&fw_entry,"fx2 controller", + hdw->hdw_desc->fx2_firmware.cnt, + hdw->hdw_desc->fx2_firmware.lst); + if (ret < 0) { + if (ret == -ENOENT) hdw->fw1_state = FW1_STATE_MISSING; + return ret; + } + + usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f)); + + pipe = usb_sndctrlpipe(hdw->usb_dev, 0); + fwsize = fw_entry->size; + + if ((fwsize != 0x2000) && + (!(hdw->hdw_desc->flag_fx2_16kb && (fwsize == 0x4000)))) { + if (hdw->hdw_desc->flag_fx2_16kb) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Wrong fx2 firmware size" + " (expected 8192 or 16384, got %u)", + fwsize); + } else { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Wrong fx2 firmware size" + " (expected 8192, got %u)", + fwsize); + } + release_firmware(fw_entry); + return -ENOMEM; + } + + fw_ptr = kmalloc(0x800, GFP_KERNEL); + if (fw_ptr == NULL){ + release_firmware(fw_entry); + return -ENOMEM; + } + + /* We have to hold the CPU during firmware upload. */ + pvr2_hdw_cpureset_assert(hdw,1); + + /* upload the firmware to address 0000-1fff in 2048 (=0x800) bytes + chunk. */ + + ret = 0; + for (address = 0; address < fwsize; address += 0x800) { + memcpy(fw_ptr, fw_entry->data + address, 0x800); + ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address, + 0, fw_ptr, 0x800, HZ); + } + + trace_firmware("Upload done, releasing device's CPU"); + + /* Now release the CPU. It will disconnect and reconnect later. */ + pvr2_hdw_cpureset_assert(hdw,0); + + kfree(fw_ptr); + release_firmware(fw_entry); + + trace_firmware("Upload done (%d bytes sent)",ret); + + /* We should have written fwsize bytes */ + if (ret == fwsize) { + hdw->fw1_state = FW1_STATE_RELOAD; + return 0; + } + + return -EIO; +} + + +/* + * pvr2_upload_firmware2() + * + * This uploads encoder firmware on endpoint 2. + * + */ + +int pvr2_upload_firmware2(struct pvr2_hdw *hdw) +{ + const struct firmware *fw_entry = NULL; + void *fw_ptr; + unsigned int pipe, fw_len, fw_done, bcnt, icnt; + int actual_length; + int ret = 0; + int fwidx; + static const char *fw_files[] = { + CX2341X_FIRM_ENC_FILENAME, + }; + + if (hdw->hdw_desc->flag_skip_cx23416_firmware) { + return 0; + } + + trace_firmware("pvr2_upload_firmware2"); + + ret = pvr2_locate_firmware(hdw,&fw_entry,"encoder", + ARRAY_SIZE(fw_files), fw_files); + if (ret < 0) return ret; + fwidx = ret; + ret = 0; + /* Since we're about to completely reinitialize the encoder, + invalidate our cached copy of its configuration state. Next + time we configure the encoder, then we'll fully configure it. */ + hdw->enc_cur_valid = 0; + + /* Encoder is about to be reset so note that as far as we're + concerned now, the encoder has never been run. */ + del_timer_sync(&hdw->encoder_run_timer); + if (hdw->state_encoder_runok) { + hdw->state_encoder_runok = 0; + trace_stbit("state_encoder_runok",hdw->state_encoder_runok); + } + + /* First prepare firmware loading */ + ret |= pvr2_write_register(hdw, 0x0048, 0xffffffff); /*interrupt mask*/ + ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000088); /*gpio dir*/ + ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/ + ret |= pvr2_hdw_cmd_deep_reset(hdw); + ret |= pvr2_write_register(hdw, 0xa064, 0x00000000); /*APU command*/ + ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000408); /*gpio dir*/ + ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/ + ret |= pvr2_write_register(hdw, 0x9058, 0xffffffed); /*VPU ctrl*/ + ret |= pvr2_write_register(hdw, 0x9054, 0xfffffffd); /*reset hw blocks*/ + ret |= pvr2_write_register(hdw, 0x07f8, 0x80000800); /*encoder SDRAM refresh*/ + ret |= pvr2_write_register(hdw, 0x07fc, 0x0000001a); /*encoder SDRAM pre-charge*/ + ret |= pvr2_write_register(hdw, 0x0700, 0x00000000); /*I2C clock*/ + ret |= pvr2_write_register(hdw, 0xaa00, 0x00000000); /*unknown*/ + ret |= pvr2_write_register(hdw, 0xaa04, 0x00057810); /*unknown*/ + ret |= pvr2_write_register(hdw, 0xaa10, 0x00148500); /*unknown*/ + ret |= pvr2_write_register(hdw, 0xaa18, 0x00840000); /*unknown*/ + ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_FWPOST1); + ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16)); + + if (ret) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "firmware2 upload prep failed, ret=%d",ret); + release_firmware(fw_entry); + goto done; + } + + /* Now send firmware */ + + fw_len = fw_entry->size; + + if (fw_len % sizeof(u32)) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "size of %s firmware" + " must be a multiple of %zu bytes", + fw_files[fwidx],sizeof(u32)); + release_firmware(fw_entry); + ret = -EINVAL; + goto done; + } + + fw_ptr = kmalloc(FIRMWARE_CHUNK_SIZE, GFP_KERNEL); + if (fw_ptr == NULL){ + release_firmware(fw_entry); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "failed to allocate memory for firmware2 upload"); + ret = -ENOMEM; + goto done; + } + + pipe = usb_sndbulkpipe(hdw->usb_dev, PVR2_FIRMWARE_ENDPOINT); + + fw_done = 0; + for (fw_done = 0; fw_done < fw_len;) { + bcnt = fw_len - fw_done; + if (bcnt > FIRMWARE_CHUNK_SIZE) bcnt = FIRMWARE_CHUNK_SIZE; + memcpy(fw_ptr, fw_entry->data + fw_done, bcnt); + /* Usbsnoop log shows that we must swap bytes... */ + /* Some background info: The data being swapped here is a + firmware image destined for the mpeg encoder chip that + lives at the other end of a USB endpoint. The encoder + chip always talks in 32 bit chunks and its storage is + organized into 32 bit words. However from the file + system to the encoder chip everything is purely a byte + stream. The firmware file's contents are always 32 bit + swapped from what the encoder expects. Thus the need + always exists to swap the bytes regardless of the endian + type of the host processor and therefore swab32() makes + the most sense. */ + for (icnt = 0; icnt < bcnt/4 ; icnt++) + ((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]); + + ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt, + &actual_length, HZ); + ret |= (actual_length != bcnt); + if (ret) break; + fw_done += bcnt; + } + + trace_firmware("upload of %s : %i / %i ", + fw_files[fwidx],fw_done,fw_len); + + kfree(fw_ptr); + release_firmware(fw_entry); + + if (ret) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "firmware2 upload transfer failure"); + goto done; + } + + /* Finish upload */ + + ret |= pvr2_write_register(hdw, 0x9054, 0xffffffff); /*reset hw blocks*/ + ret |= pvr2_write_register(hdw, 0x9058, 0xffffffe8); /*VPU ctrl*/ + ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16)); + + if (ret) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "firmware2 upload post-proc failure"); + } + + done: + if (hdw->hdw_desc->signal_routing_scheme == + PVR2_ROUTING_SCHEME_GOTVIEW) { + /* Ensure that GPIO 11 is set to output for GOTVIEW + hardware. */ + pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0); + } + return ret; +} + + +static const char *pvr2_get_state_name(unsigned int st) +{ + if (st < ARRAY_SIZE(pvr2_state_names)) { + return pvr2_state_names[st]; + } + return "???"; +} + +static int pvr2_decoder_enable(struct pvr2_hdw *hdw,int enablefl) +{ + /* Even though we really only care about the video decoder chip at + this point, we'll broadcast stream on/off to all sub-devices + anyway, just in case somebody else wants to hear the + command... */ + pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 stream=%s", + (enablefl ? "on" : "off")); + v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_stream, enablefl); + v4l2_device_call_all(&hdw->v4l2_dev, 0, audio, s_stream, enablefl); + if (hdw->decoder_client_id) { + /* We get here if the encoder has been noticed. Otherwise + we'll issue a warning to the user (which should + normally never happen). */ + return 0; + } + if (!hdw->flag_decoder_missed) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "WARNING: No decoder present"); + hdw->flag_decoder_missed = !0; + trace_stbit("flag_decoder_missed", + hdw->flag_decoder_missed); + } + return -EIO; +} + + +int pvr2_hdw_get_state(struct pvr2_hdw *hdw) +{ + return hdw->master_state; +} + + +static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *hdw) +{ + if (!hdw->flag_tripped) return 0; + hdw->flag_tripped = 0; + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Clearing driver error statuss"); + return !0; +} + + +int pvr2_hdw_untrip(struct pvr2_hdw *hdw) +{ + int fl; + LOCK_TAKE(hdw->big_lock); do { + fl = pvr2_hdw_untrip_unlocked(hdw); + } while (0); LOCK_GIVE(hdw->big_lock); + if (fl) pvr2_hdw_state_sched(hdw); + return 0; +} + + + + +int pvr2_hdw_get_streaming(struct pvr2_hdw *hdw) +{ + return hdw->state_pipeline_req != 0; +} + + +int pvr2_hdw_set_streaming(struct pvr2_hdw *hdw,int enable_flag) +{ + int ret,st; + LOCK_TAKE(hdw->big_lock); do { + pvr2_hdw_untrip_unlocked(hdw); + if ((!enable_flag) != !(hdw->state_pipeline_req)) { + hdw->state_pipeline_req = enable_flag != 0; + pvr2_trace(PVR2_TRACE_START_STOP, + "/*--TRACE_STREAM--*/ %s", + enable_flag ? "enable" : "disable"); + } + pvr2_hdw_state_sched(hdw); + } while (0); LOCK_GIVE(hdw->big_lock); + if ((ret = pvr2_hdw_wait(hdw,0)) < 0) return ret; + if (enable_flag) { + while ((st = hdw->master_state) != PVR2_STATE_RUN) { + if (st != PVR2_STATE_READY) return -EIO; + if ((ret = pvr2_hdw_wait(hdw,st)) < 0) return ret; + } + } + return 0; +} + + +int pvr2_hdw_set_stream_type(struct pvr2_hdw *hdw,enum pvr2_config config) +{ + int fl; + LOCK_TAKE(hdw->big_lock); + if ((fl = (hdw->desired_stream_type != config)) != 0) { + hdw->desired_stream_type = config; + hdw->state_pipeline_config = 0; + trace_stbit("state_pipeline_config", + hdw->state_pipeline_config); + pvr2_hdw_state_sched(hdw); + } + LOCK_GIVE(hdw->big_lock); + if (fl) return 0; + return pvr2_hdw_wait(hdw,0); +} + + +static int get_default_tuner_type(struct pvr2_hdw *hdw) +{ + int unit_number = hdw->unit_number; + int tp = -1; + if ((unit_number >= 0) && (unit_number < PVR_NUM)) { + tp = tuner[unit_number]; + } + if (tp < 0) return -EINVAL; + hdw->tuner_type = tp; + hdw->tuner_updated = !0; + return 0; +} + + +static v4l2_std_id get_default_standard(struct pvr2_hdw *hdw) +{ + int unit_number = hdw->unit_number; + int tp = 0; + if ((unit_number >= 0) && (unit_number < PVR_NUM)) { + tp = video_std[unit_number]; + if (tp) return tp; + } + return 0; +} + + +static unsigned int get_default_error_tolerance(struct pvr2_hdw *hdw) +{ + int unit_number = hdw->unit_number; + int tp = 0; + if ((unit_number >= 0) && (unit_number < PVR_NUM)) { + tp = tolerance[unit_number]; + } + return tp; +} + + +static int pvr2_hdw_check_firmware(struct pvr2_hdw *hdw) +{ + /* Try a harmless request to fetch the eeprom's address over + endpoint 1. See what happens. Only the full FX2 image can + respond to this. If this probe fails then likely the FX2 + firmware needs be loaded. */ + int result; + LOCK_TAKE(hdw->ctl_lock); do { + hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR; + result = pvr2_send_request_ex(hdw,HZ*1,!0, + hdw->cmd_buffer,1, + hdw->cmd_buffer,1); + if (result < 0) break; + } while(0); LOCK_GIVE(hdw->ctl_lock); + if (result) { + pvr2_trace(PVR2_TRACE_INIT, + "Probe of device endpoint 1 result status %d", + result); + } else { + pvr2_trace(PVR2_TRACE_INIT, + "Probe of device endpoint 1 succeeded"); + } + return result == 0; +} + +struct pvr2_std_hack { + v4l2_std_id pat; /* Pattern to match */ + v4l2_std_id msk; /* Which bits we care about */ + v4l2_std_id std; /* What additional standards or default to set */ +}; + +/* This data structure labels specific combinations of standards from + tveeprom that we'll try to recognize. If we recognize one, then assume + a specified default standard to use. This is here because tveeprom only + tells us about available standards not the intended default standard (if + any) for the device in question. We guess the default based on what has + been reported as available. Note that this is only for guessing a + default - which can always be overridden explicitly - and if the user + has otherwise named a default then that default will always be used in + place of this table. */ +static const struct pvr2_std_hack std_eeprom_maps[] = { + { /* PAL(B/G) */ + .pat = V4L2_STD_B|V4L2_STD_GH, + .std = V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_PAL_G, + }, + { /* NTSC(M) */ + .pat = V4L2_STD_MN, + .std = V4L2_STD_NTSC_M, + }, + { /* PAL(I) */ + .pat = V4L2_STD_PAL_I, + .std = V4L2_STD_PAL_I, + }, + { /* SECAM(L/L') */ + .pat = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC, + .std = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC, + }, + { /* PAL(D/D1/K) */ + .pat = V4L2_STD_DK, + .std = V4L2_STD_PAL_D|V4L2_STD_PAL_D1|V4L2_STD_PAL_K, + }, +}; + +static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) +{ + char buf[40]; + unsigned int bcnt; + v4l2_std_id std1,std2,std3; + + std1 = get_default_standard(hdw); + std3 = std1 ? 0 : hdw->hdw_desc->default_std_mask; + + bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom); + pvr2_trace(PVR2_TRACE_STD, + "Supported video standard(s) reported available" + " in hardware: %.*s", + bcnt,buf); + + hdw->std_mask_avail = hdw->std_mask_eeprom; + + std2 = (std1|std3) & ~hdw->std_mask_avail; + if (std2) { + bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2); + pvr2_trace(PVR2_TRACE_STD, + "Expanding supported video standards" + " to include: %.*s", + bcnt,buf); + hdw->std_mask_avail |= std2; + } + + hdw->std_info_cur.def.type_bitmask.valid_bits = hdw->std_mask_avail; + + if (std1) { + bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std1); + pvr2_trace(PVR2_TRACE_STD, + "Initial video standard forced to %.*s", + bcnt,buf); + hdw->std_mask_cur = std1; + hdw->std_dirty = !0; + return; + } + if (std3) { + bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std3); + pvr2_trace(PVR2_TRACE_STD, + "Initial video standard" + " (determined by device type): %.*s",bcnt,buf); + hdw->std_mask_cur = std3; + hdw->std_dirty = !0; + return; + } + + { + unsigned int idx; + for (idx = 0; idx < ARRAY_SIZE(std_eeprom_maps); idx++) { + if (std_eeprom_maps[idx].msk ? + ((std_eeprom_maps[idx].pat ^ + hdw->std_mask_eeprom) & + std_eeprom_maps[idx].msk) : + (std_eeprom_maps[idx].pat != + hdw->std_mask_eeprom)) continue; + bcnt = pvr2_std_id_to_str(buf,sizeof(buf), + std_eeprom_maps[idx].std); + pvr2_trace(PVR2_TRACE_STD, + "Initial video standard guessed as %.*s", + bcnt,buf); + hdw->std_mask_cur = std_eeprom_maps[idx].std; + hdw->std_dirty = !0; + return; + } + } + +} + + +static unsigned int pvr2_copy_i2c_addr_list( + unsigned short *dst, const unsigned char *src, + unsigned int dst_max) +{ + unsigned int cnt = 0; + if (!src) return 0; + while (src[cnt] && (cnt + 1) < dst_max) { + dst[cnt] = src[cnt]; + cnt++; + } + dst[cnt] = I2C_CLIENT_END; + return cnt; +} + + +static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw) +{ + /* + Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness + for cx25840 causes that module to correctly set up its video + scaling. This is really a problem in the cx25840 module itself, + but we work around it here. The problem has not been seen in + ivtv because there VBI is supported and set up. We don't do VBI + here (at least not yet) and thus we never attempted to even set + it up. + */ + struct v4l2_format fmt; + if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) { + /* We're not using a cx25840 so don't enable the hack */ + return; + } + + pvr2_trace(PVR2_TRACE_INIT, + "Module ID %u:" + " Executing cx25840 VBI hack", + hdw->decoder_client_id); + memset(&fmt, 0, sizeof(fmt)); + fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + fmt.fmt.sliced.service_lines[0][21] = V4L2_SLICED_CAPTION_525; + fmt.fmt.sliced.service_lines[1][21] = V4L2_SLICED_CAPTION_525; + v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, + vbi, s_sliced_fmt, &fmt.fmt.sliced); +} + + +static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, + const struct pvr2_device_client_desc *cd) +{ + const char *fname; + unsigned char mid; + struct v4l2_subdev *sd; + unsigned int i2ccnt; + const unsigned char *p; + /* Arbitrary count - max # i2c addresses we will probe */ + unsigned short i2caddr[25]; + + mid = cd->module_id; + fname = (mid < ARRAY_SIZE(module_names)) ? module_names[mid] : NULL; + if (!fname) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Module ID %u for device %s has no name?" + " The driver might have a configuration problem.", + mid, + hdw->hdw_desc->description); + return -EINVAL; + } + pvr2_trace(PVR2_TRACE_INIT, + "Module ID %u (%s) for device %s being loaded...", + mid, fname, + hdw->hdw_desc->description); + + i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, cd->i2c_address_list, + ARRAY_SIZE(i2caddr)); + if (!i2ccnt && ((p = (mid < ARRAY_SIZE(module_i2c_addresses)) ? + module_i2c_addresses[mid] : NULL) != NULL)) { + /* Second chance: Try default i2c address list */ + i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, p, + ARRAY_SIZE(i2caddr)); + if (i2ccnt) { + pvr2_trace(PVR2_TRACE_INIT, + "Module ID %u:" + " Using default i2c address list", + mid); + } + } + + if (!i2ccnt) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Module ID %u (%s) for device %s:" + " No i2c addresses." + " The driver might have a configuration problem.", + mid, fname, hdw->hdw_desc->description); + return -EINVAL; + } + + if (i2ccnt == 1) { + pvr2_trace(PVR2_TRACE_INIT, + "Module ID %u:" + " Setting up with specified i2c address 0x%x", + mid, i2caddr[0]); + sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, + fname, i2caddr[0], NULL); + } else { + pvr2_trace(PVR2_TRACE_INIT, + "Module ID %u:" + " Setting up with address probe list", + mid); + sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, + fname, 0, i2caddr); + } + + if (!sd) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Module ID %u (%s) for device %s failed to load." + " Possible missing sub-device kernel module or" + " initialization failure within module.", + mid, fname, hdw->hdw_desc->description); + return -EIO; + } + + /* Tag this sub-device instance with the module ID we know about. + In other places we'll use that tag to determine if the instance + requires special handling. */ + sd->grp_id = mid; + + pvr2_trace(PVR2_TRACE_INFO, "Attached sub-driver %s", fname); + + + /* client-specific setup... */ + switch (mid) { + case PVR2_CLIENT_ID_CX25840: + case PVR2_CLIENT_ID_SAA7115: + hdw->decoder_client_id = mid; + break; + default: break; + } + + return 0; +} + + +static void pvr2_hdw_load_modules(struct pvr2_hdw *hdw) +{ + unsigned int idx; + const struct pvr2_string_table *cm; + const struct pvr2_device_client_table *ct; + int okFl = !0; + + cm = &hdw->hdw_desc->client_modules; + for (idx = 0; idx < cm->cnt; idx++) { + request_module(cm->lst[idx]); + } + + ct = &hdw->hdw_desc->client_table; + for (idx = 0; idx < ct->cnt; idx++) { + if (pvr2_hdw_load_subdev(hdw, &ct->lst[idx]) < 0) okFl = 0; + } + if (!okFl) { + hdw->flag_modulefail = !0; + pvr2_hdw_render_useless(hdw); + } +} + + +static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) +{ + int ret; + unsigned int idx; + struct pvr2_ctrl *cptr; + int reloadFl = 0; + if (hdw->hdw_desc->fx2_firmware.cnt) { + if (!reloadFl) { + reloadFl = + (hdw->usb_intf->cur_altsetting->desc.bNumEndpoints + == 0); + if (reloadFl) { + pvr2_trace(PVR2_TRACE_INIT, + "USB endpoint config looks strange" + "; possibly firmware needs to be" + " loaded"); + } + } + if (!reloadFl) { + reloadFl = !pvr2_hdw_check_firmware(hdw); + if (reloadFl) { + pvr2_trace(PVR2_TRACE_INIT, + "Check for FX2 firmware failed" + "; possibly firmware needs to be" + " loaded"); + } + } + if (reloadFl) { + if (pvr2_upload_firmware1(hdw) != 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Failure uploading firmware1"); + } + return; + } + } + hdw->fw1_state = FW1_STATE_OK; + + if (!pvr2_hdw_dev_ok(hdw)) return; + + hdw->force_dirty = !0; + + if (!hdw->hdw_desc->flag_no_powerup) { + pvr2_hdw_cmd_powerup(hdw); + if (!pvr2_hdw_dev_ok(hdw)) return; + } + + /* Take the IR chip out of reset, if appropriate */ + if (hdw->ir_scheme_active == PVR2_IR_SCHEME_ZILOG) { + pvr2_issue_simple_cmd(hdw, + FX2CMD_HCW_ZILOG_RESET | + (1 << 8) | + ((0) << 16)); + } + + // This step MUST happen after the earlier powerup step. + pvr2_i2c_core_init(hdw); + if (!pvr2_hdw_dev_ok(hdw)) return; + + pvr2_hdw_load_modules(hdw); + if (!pvr2_hdw_dev_ok(hdw)) return; + + v4l2_device_call_all(&hdw->v4l2_dev, 0, core, load_fw); + + for (idx = 0; idx < CTRLDEF_COUNT; idx++) { + cptr = hdw->controls + idx; + if (cptr->info->skip_init) continue; + if (!cptr->info->set_value) continue; + cptr->info->set_value(cptr,~0,cptr->info->default_value); + } + + pvr2_hdw_cx25840_vbi_hack(hdw); + + /* Set up special default values for the television and radio + frequencies here. It's not really important what these defaults + are, but I set them to something usable in the Chicago area just + to make driver testing a little easier. */ + + hdw->freqValTelevision = default_tv_freq; + hdw->freqValRadio = default_radio_freq; + + // Do not use pvr2_reset_ctl_endpoints() here. It is not + // thread-safe against the normal pvr2_send_request() mechanism. + // (We should make it thread safe). + + if (hdw->hdw_desc->flag_has_hauppauge_rom) { + ret = pvr2_hdw_get_eeprom_addr(hdw); + if (!pvr2_hdw_dev_ok(hdw)) return; + if (ret < 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Unable to determine location of eeprom," + " skipping"); + } else { + hdw->eeprom_addr = ret; + pvr2_eeprom_analyze(hdw); + if (!pvr2_hdw_dev_ok(hdw)) return; + } + } else { + hdw->tuner_type = hdw->hdw_desc->default_tuner_type; + hdw->tuner_updated = !0; + hdw->std_mask_eeprom = V4L2_STD_ALL; + } + + if (hdw->serial_number) { + idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1, + "sn-%lu", hdw->serial_number); + } else if (hdw->unit_number >= 0) { + idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1, + "unit-%c", + hdw->unit_number + 'a'); + } else { + idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1, + "unit-??"); + } + hdw->identifier[idx] = 0; + + pvr2_hdw_setup_std(hdw); + + if (!get_default_tuner_type(hdw)) { + pvr2_trace(PVR2_TRACE_INIT, + "pvr2_hdw_setup: Tuner type overridden to %d", + hdw->tuner_type); + } + + + if (!pvr2_hdw_dev_ok(hdw)) return; + + if (hdw->hdw_desc->signal_routing_scheme == + PVR2_ROUTING_SCHEME_GOTVIEW) { + /* Ensure that GPIO 11 is set to output for GOTVIEW + hardware. */ + pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0); + } + + pvr2_hdw_commit_setup(hdw); + + hdw->vid_stream = pvr2_stream_create(); + if (!pvr2_hdw_dev_ok(hdw)) return; + pvr2_trace(PVR2_TRACE_INIT, + "pvr2_hdw_setup: video stream is %p",hdw->vid_stream); + if (hdw->vid_stream) { + idx = get_default_error_tolerance(hdw); + if (idx) { + pvr2_trace(PVR2_TRACE_INIT, + "pvr2_hdw_setup: video stream %p" + " setting tolerance %u", + hdw->vid_stream,idx); + } + pvr2_stream_setup(hdw->vid_stream,hdw->usb_dev, + PVR2_VID_ENDPOINT,idx); + } + + if (!pvr2_hdw_dev_ok(hdw)) return; + + hdw->flag_init_ok = !0; + + pvr2_hdw_state_sched(hdw); +} + + +/* Set up the structure and attempt to put the device into a usable state. + This can be a time-consuming operation, which is why it is not done + internally as part of the create() step. */ +static void pvr2_hdw_setup(struct pvr2_hdw *hdw) +{ + pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) begin",hdw); + do { + pvr2_hdw_setup_low(hdw); + pvr2_trace(PVR2_TRACE_INIT, + "pvr2_hdw_setup(hdw=%p) done, ok=%d init_ok=%d", + hdw,pvr2_hdw_dev_ok(hdw),hdw->flag_init_ok); + if (pvr2_hdw_dev_ok(hdw)) { + if (hdw->flag_init_ok) { + pvr2_trace( + PVR2_TRACE_INFO, + "Device initialization" + " completed successfully."); + break; + } + if (hdw->fw1_state == FW1_STATE_RELOAD) { + pvr2_trace( + PVR2_TRACE_INFO, + "Device microcontroller firmware" + " (re)loaded; it should now reset" + " and reconnect."); + break; + } + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Device initialization was not successful."); + if (hdw->fw1_state == FW1_STATE_MISSING) { + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Giving up since device" + " microcontroller firmware" + " appears to be missing."); + break; + } + } + if (hdw->flag_modulefail) { + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "***WARNING*** pvrusb2 driver initialization" + " failed due to the failure of one or more" + " sub-device kernel modules."); + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "You need to resolve the failing condition" + " before this driver can function. There" + " should be some earlier messages giving more" + " information about the problem."); + break; + } + if (procreload) { + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Attempting pvrusb2 recovery by reloading" + " primary firmware."); + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "If this works, device should disconnect" + " and reconnect in a sane state."); + hdw->fw1_state = FW1_STATE_UNKNOWN; + pvr2_upload_firmware1(hdw); + } else { + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "***WARNING*** pvrusb2 device hardware" + " appears to be jammed" + " and I can't clear it."); + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "You might need to power cycle" + " the pvrusb2 device" + " in order to recover."); + } + } while (0); + pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) end",hdw); +} + + +/* Perform second stage initialization. Set callback pointer first so that + we can avoid a possible initialization race (if the kernel thread runs + before the callback has been set). */ +int pvr2_hdw_initialize(struct pvr2_hdw *hdw, + void (*callback_func)(void *), + void *callback_data) +{ + LOCK_TAKE(hdw->big_lock); do { + if (hdw->flag_disconnected) { + /* Handle a race here: If we're already + disconnected by this point, then give up. If we + get past this then we'll remain connected for + the duration of initialization since the entire + initialization sequence is now protected by the + big_lock. */ + break; + } + hdw->state_data = callback_data; + hdw->state_func = callback_func; + pvr2_hdw_setup(hdw); + } while (0); LOCK_GIVE(hdw->big_lock); + return hdw->flag_init_ok; +} + + +/* Create, set up, and return a structure for interacting with the + underlying hardware. */ +struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, + const struct usb_device_id *devid) +{ + unsigned int idx,cnt1,cnt2,m; + struct pvr2_hdw *hdw = NULL; + int valid_std_mask; + struct pvr2_ctrl *cptr; + struct usb_device *usb_dev; + const struct pvr2_device_desc *hdw_desc; + __u8 ifnum; + struct v4l2_queryctrl qctrl; + struct pvr2_ctl_info *ciptr; + + usb_dev = interface_to_usbdev(intf); + + hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info); + + if (hdw_desc == NULL) { + pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create:" + " No device description pointer," + " unable to continue."); + pvr2_trace(PVR2_TRACE_INIT, "If you have a new device type," + " please contact Mike Isely <isely@pobox.com>" + " to get it included in the driver\n"); + goto fail; + } + + hdw = kzalloc(sizeof(*hdw),GFP_KERNEL); + pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"", + hdw,hdw_desc->description); + pvr2_trace(PVR2_TRACE_INFO, "Hardware description: %s", + hdw_desc->description); + if (hdw_desc->flag_is_experimental) { + pvr2_trace(PVR2_TRACE_INFO, "**********"); + pvr2_trace(PVR2_TRACE_INFO, + "WARNING: Support for this device (%s) is" + " experimental.", hdw_desc->description); + pvr2_trace(PVR2_TRACE_INFO, + "Important functionality might not be" + " entirely working."); + pvr2_trace(PVR2_TRACE_INFO, + "Please consider contacting the driver author to" + " help with further stabilization of the driver."); + pvr2_trace(PVR2_TRACE_INFO, "**********"); + } + if (!hdw) goto fail; + + init_timer(&hdw->quiescent_timer); + hdw->quiescent_timer.data = (unsigned long)hdw; + hdw->quiescent_timer.function = pvr2_hdw_quiescent_timeout; + + init_timer(&hdw->decoder_stabilization_timer); + hdw->decoder_stabilization_timer.data = (unsigned long)hdw; + hdw->decoder_stabilization_timer.function = + pvr2_hdw_decoder_stabilization_timeout; + + init_timer(&hdw->encoder_wait_timer); + hdw->encoder_wait_timer.data = (unsigned long)hdw; + hdw->encoder_wait_timer.function = pvr2_hdw_encoder_wait_timeout; + + init_timer(&hdw->encoder_run_timer); + hdw->encoder_run_timer.data = (unsigned long)hdw; + hdw->encoder_run_timer.function = pvr2_hdw_encoder_run_timeout; + + hdw->master_state = PVR2_STATE_DEAD; + + init_waitqueue_head(&hdw->state_wait_data); + + hdw->tuner_signal_stale = !0; + cx2341x_fill_defaults(&hdw->enc_ctl_state); + + /* Calculate which inputs are OK */ + m = 0; + if (hdw_desc->flag_has_analogtuner) m |= 1 << PVR2_CVAL_INPUT_TV; + if (hdw_desc->digital_control_scheme != PVR2_DIGITAL_SCHEME_NONE) { + m |= 1 << PVR2_CVAL_INPUT_DTV; + } + if (hdw_desc->flag_has_svideo) m |= 1 << PVR2_CVAL_INPUT_SVIDEO; + if (hdw_desc->flag_has_composite) m |= 1 << PVR2_CVAL_INPUT_COMPOSITE; + if (hdw_desc->flag_has_fmradio) m |= 1 << PVR2_CVAL_INPUT_RADIO; + hdw->input_avail_mask = m; + hdw->input_allowed_mask = hdw->input_avail_mask; + + /* If not a hybrid device, pathway_state never changes. So + initialize it here to what it should forever be. */ + if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_DTV))) { + hdw->pathway_state = PVR2_PATHWAY_ANALOG; + } else if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_TV))) { + hdw->pathway_state = PVR2_PATHWAY_DIGITAL; + } + + hdw->control_cnt = CTRLDEF_COUNT; + hdw->control_cnt += MPEGDEF_COUNT; + hdw->controls = kzalloc(sizeof(struct pvr2_ctrl) * hdw->control_cnt, + GFP_KERNEL); + if (!hdw->controls) goto fail; + hdw->hdw_desc = hdw_desc; + hdw->ir_scheme_active = hdw->hdw_desc->ir_scheme; + for (idx = 0; idx < hdw->control_cnt; idx++) { + cptr = hdw->controls + idx; + cptr->hdw = hdw; + } + for (idx = 0; idx < 32; idx++) { + hdw->std_mask_ptrs[idx] = hdw->std_mask_names[idx]; + } + for (idx = 0; idx < CTRLDEF_COUNT; idx++) { + cptr = hdw->controls + idx; + cptr->info = control_defs+idx; + } + + /* Ensure that default input choice is a valid one. */ + m = hdw->input_avail_mask; + if (m) for (idx = 0; idx < (sizeof(m) << 3); idx++) { + if (!((1 << idx) & m)) continue; + hdw->input_val = idx; + break; + } + + /* Define and configure additional controls from cx2341x module. */ + hdw->mpeg_ctrl_info = kcalloc(MPEGDEF_COUNT, + sizeof(*(hdw->mpeg_ctrl_info)), + GFP_KERNEL); + if (!hdw->mpeg_ctrl_info) goto fail; + for (idx = 0; idx < MPEGDEF_COUNT; idx++) { + cptr = hdw->controls + idx + CTRLDEF_COUNT; + ciptr = &(hdw->mpeg_ctrl_info[idx].info); + ciptr->desc = hdw->mpeg_ctrl_info[idx].desc; + ciptr->name = mpeg_ids[idx].strid; + ciptr->v4l_id = mpeg_ids[idx].id; + ciptr->skip_init = !0; + ciptr->get_value = ctrl_cx2341x_get; + ciptr->get_v4lflags = ctrl_cx2341x_getv4lflags; + ciptr->is_dirty = ctrl_cx2341x_is_dirty; + if (!idx) ciptr->clear_dirty = ctrl_cx2341x_clear_dirty; + qctrl.id = ciptr->v4l_id; + cx2341x_ctrl_query(&hdw->enc_ctl_state,&qctrl); + if (!(qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY)) { + ciptr->set_value = ctrl_cx2341x_set; + } + strncpy(hdw->mpeg_ctrl_info[idx].desc,qctrl.name, + PVR2_CTLD_INFO_DESC_SIZE); + hdw->mpeg_ctrl_info[idx].desc[PVR2_CTLD_INFO_DESC_SIZE-1] = 0; + ciptr->default_value = qctrl.default_value; + switch (qctrl.type) { + default: + case V4L2_CTRL_TYPE_INTEGER: + ciptr->type = pvr2_ctl_int; + ciptr->def.type_int.min_value = qctrl.minimum; + ciptr->def.type_int.max_value = qctrl.maximum; + break; + case V4L2_CTRL_TYPE_BOOLEAN: + ciptr->type = pvr2_ctl_bool; + break; + case V4L2_CTRL_TYPE_MENU: + ciptr->type = pvr2_ctl_enum; + ciptr->def.type_enum.value_names = + cx2341x_ctrl_get_menu(&hdw->enc_ctl_state, + ciptr->v4l_id); + for (cnt1 = 0; + ciptr->def.type_enum.value_names[cnt1] != NULL; + cnt1++) { } + ciptr->def.type_enum.count = cnt1; + break; + } + cptr->info = ciptr; + } + + // Initialize control data regarding video standard masks + valid_std_mask = pvr2_std_get_usable(); + for (idx = 0; idx < 32; idx++) { + if (!(valid_std_mask & (1 << idx))) continue; + cnt1 = pvr2_std_id_to_str( + hdw->std_mask_names[idx], + sizeof(hdw->std_mask_names[idx])-1, + 1 << idx); + hdw->std_mask_names[idx][cnt1] = 0; + } + cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDAVAIL); + if (cptr) { + memcpy(&hdw->std_info_avail,cptr->info, + sizeof(hdw->std_info_avail)); + cptr->info = &hdw->std_info_avail; + hdw->std_info_avail.def.type_bitmask.bit_names = + hdw->std_mask_ptrs; + hdw->std_info_avail.def.type_bitmask.valid_bits = + valid_std_mask; + } + cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDCUR); + if (cptr) { + memcpy(&hdw->std_info_cur,cptr->info, + sizeof(hdw->std_info_cur)); + cptr->info = &hdw->std_info_cur; + hdw->std_info_cur.def.type_bitmask.bit_names = + hdw->std_mask_ptrs; + hdw->std_info_cur.def.type_bitmask.valid_bits = + valid_std_mask; + } + cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDDETECT); + if (cptr) { + memcpy(&hdw->std_info_detect,cptr->info, + sizeof(hdw->std_info_detect)); + cptr->info = &hdw->std_info_detect; + hdw->std_info_detect.def.type_bitmask.bit_names = + hdw->std_mask_ptrs; + hdw->std_info_detect.def.type_bitmask.valid_bits = + valid_std_mask; + } + + hdw->cropcap_stale = !0; + hdw->eeprom_addr = -1; + hdw->unit_number = -1; + hdw->v4l_minor_number_video = -1; + hdw->v4l_minor_number_vbi = -1; + hdw->v4l_minor_number_radio = -1; + hdw->ctl_write_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL); + if (!hdw->ctl_write_buffer) goto fail; + hdw->ctl_read_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL); + if (!hdw->ctl_read_buffer) goto fail; + hdw->ctl_write_urb = usb_alloc_urb(0,GFP_KERNEL); + if (!hdw->ctl_write_urb) goto fail; + hdw->ctl_read_urb = usb_alloc_urb(0,GFP_KERNEL); + if (!hdw->ctl_read_urb) goto fail; + + if (v4l2_device_register(&intf->dev, &hdw->v4l2_dev) != 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Error registering with v4l core, giving up"); + goto fail; + } + mutex_lock(&pvr2_unit_mtx); do { + for (idx = 0; idx < PVR_NUM; idx++) { + if (unit_pointers[idx]) continue; + hdw->unit_number = idx; + unit_pointers[idx] = hdw; + break; + } + } while (0); mutex_unlock(&pvr2_unit_mtx); + + cnt1 = 0; + cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"pvrusb2"); + cnt1 += cnt2; + if (hdw->unit_number >= 0) { + cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"_%c", + ('a' + hdw->unit_number)); + cnt1 += cnt2; + } + if (cnt1 >= sizeof(hdw->name)) cnt1 = sizeof(hdw->name)-1; + hdw->name[cnt1] = 0; + + hdw->workqueue = create_singlethread_workqueue(hdw->name); + INIT_WORK(&hdw->workpoll,pvr2_hdw_worker_poll); + + pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s", + hdw->unit_number,hdw->name); + + hdw->tuner_type = -1; + hdw->flag_ok = !0; + + hdw->usb_intf = intf; + hdw->usb_dev = usb_dev; + + usb_make_path(hdw->usb_dev, hdw->bus_info, sizeof(hdw->bus_info)); + + ifnum = hdw->usb_intf->cur_altsetting->desc.bInterfaceNumber; + usb_set_interface(hdw->usb_dev,ifnum,0); + + mutex_init(&hdw->ctl_lock_mutex); + mutex_init(&hdw->big_lock_mutex); + + return hdw; + fail: + if (hdw) { + del_timer_sync(&hdw->quiescent_timer); + del_timer_sync(&hdw->decoder_stabilization_timer); + del_timer_sync(&hdw->encoder_run_timer); + del_timer_sync(&hdw->encoder_wait_timer); + if (hdw->workqueue) { + flush_workqueue(hdw->workqueue); + destroy_workqueue(hdw->workqueue); + hdw->workqueue = NULL; + } + usb_free_urb(hdw->ctl_read_urb); + usb_free_urb(hdw->ctl_write_urb); + kfree(hdw->ctl_read_buffer); + kfree(hdw->ctl_write_buffer); + kfree(hdw->controls); + kfree(hdw->mpeg_ctrl_info); + kfree(hdw); + } + return NULL; +} + + +/* Remove _all_ associations between this driver and the underlying USB + layer. */ +static void pvr2_hdw_remove_usb_stuff(struct pvr2_hdw *hdw) +{ + if (hdw->flag_disconnected) return; + pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_remove_usb_stuff: hdw=%p",hdw); + if (hdw->ctl_read_urb) { + usb_kill_urb(hdw->ctl_read_urb); + usb_free_urb(hdw->ctl_read_urb); + hdw->ctl_read_urb = NULL; + } + if (hdw->ctl_write_urb) { + usb_kill_urb(hdw->ctl_write_urb); + usb_free_urb(hdw->ctl_write_urb); + hdw->ctl_write_urb = NULL; + } + if (hdw->ctl_read_buffer) { + kfree(hdw->ctl_read_buffer); + hdw->ctl_read_buffer = NULL; + } + if (hdw->ctl_write_buffer) { + kfree(hdw->ctl_write_buffer); + hdw->ctl_write_buffer = NULL; + } + hdw->flag_disconnected = !0; + /* If we don't do this, then there will be a dangling struct device + reference to our disappearing device persisting inside the V4L + core... */ + v4l2_device_disconnect(&hdw->v4l2_dev); + hdw->usb_dev = NULL; + hdw->usb_intf = NULL; + pvr2_hdw_render_useless(hdw); +} + + +/* Destroy hardware interaction structure */ +void pvr2_hdw_destroy(struct pvr2_hdw *hdw) +{ + if (!hdw) return; + pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_destroy: hdw=%p",hdw); + if (hdw->workqueue) { + flush_workqueue(hdw->workqueue); + destroy_workqueue(hdw->workqueue); + hdw->workqueue = NULL; + } + del_timer_sync(&hdw->quiescent_timer); + del_timer_sync(&hdw->decoder_stabilization_timer); + del_timer_sync(&hdw->encoder_run_timer); + del_timer_sync(&hdw->encoder_wait_timer); + if (hdw->fw_buffer) { + kfree(hdw->fw_buffer); + hdw->fw_buffer = NULL; + } + if (hdw->vid_stream) { + pvr2_stream_destroy(hdw->vid_stream); + hdw->vid_stream = NULL; + } + pvr2_i2c_core_done(hdw); + v4l2_device_unregister(&hdw->v4l2_dev); + pvr2_hdw_remove_usb_stuff(hdw); + mutex_lock(&pvr2_unit_mtx); do { + if ((hdw->unit_number >= 0) && + (hdw->unit_number < PVR_NUM) && + (unit_pointers[hdw->unit_number] == hdw)) { + unit_pointers[hdw->unit_number] = NULL; + } + } while (0); mutex_unlock(&pvr2_unit_mtx); + kfree(hdw->controls); + kfree(hdw->mpeg_ctrl_info); + kfree(hdw); +} + + +int pvr2_hdw_dev_ok(struct pvr2_hdw *hdw) +{ + return (hdw && hdw->flag_ok); +} + + +/* Called when hardware has been unplugged */ +void pvr2_hdw_disconnect(struct pvr2_hdw *hdw) +{ + pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw); + LOCK_TAKE(hdw->big_lock); + LOCK_TAKE(hdw->ctl_lock); + pvr2_hdw_remove_usb_stuff(hdw); + LOCK_GIVE(hdw->ctl_lock); + LOCK_GIVE(hdw->big_lock); +} + + +/* Get the number of defined controls */ +unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *hdw) +{ + return hdw->control_cnt; +} + + +/* Retrieve a control handle given its index (0..count-1) */ +struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *hdw, + unsigned int idx) +{ + if (idx >= hdw->control_cnt) return NULL; + return hdw->controls + idx; +} + + +/* Retrieve a control handle given its index (0..count-1) */ +struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *hdw, + unsigned int ctl_id) +{ + struct pvr2_ctrl *cptr; + unsigned int idx; + int i; + + /* This could be made a lot more efficient, but for now... */ + for (idx = 0; idx < hdw->control_cnt; idx++) { + cptr = hdw->controls + idx; + i = cptr->info->internal_id; + if (i && (i == ctl_id)) return cptr; + } + return NULL; +} + + +/* Given a V4L ID, retrieve the control structure associated with it. */ +struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *hdw,unsigned int ctl_id) +{ + struct pvr2_ctrl *cptr; + unsigned int idx; + int i; + + /* This could be made a lot more efficient, but for now... */ + for (idx = 0; idx < hdw->control_cnt; idx++) { + cptr = hdw->controls + idx; + i = cptr->info->v4l_id; + if (i && (i == ctl_id)) return cptr; + } + return NULL; +} + + +/* Given a V4L ID for its immediate predecessor, retrieve the control + structure associated with it. */ +struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *hdw, + unsigned int ctl_id) +{ + struct pvr2_ctrl *cptr,*cp2; + unsigned int idx; + int i; + + /* This could be made a lot more efficient, but for now... */ + cp2 = NULL; + for (idx = 0; idx < hdw->control_cnt; idx++) { + cptr = hdw->controls + idx; + i = cptr->info->v4l_id; + if (!i) continue; + if (i <= ctl_id) continue; + if (cp2 && (cp2->info->v4l_id < i)) continue; + cp2 = cptr; + } + return cp2; + return NULL; +} + + +static const char *get_ctrl_typename(enum pvr2_ctl_type tp) +{ + switch (tp) { + case pvr2_ctl_int: return "integer"; + case pvr2_ctl_enum: return "enum"; + case pvr2_ctl_bool: return "boolean"; + case pvr2_ctl_bitmask: return "bitmask"; + } + return ""; +} + + +static void pvr2_subdev_set_control(struct pvr2_hdw *hdw, int id, + const char *name, int val) +{ + struct v4l2_control ctrl; + pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 %s=%d", name, val); + memset(&ctrl, 0, sizeof(ctrl)); + ctrl.id = id; + ctrl.value = val; + v4l2_device_call_all(&hdw->v4l2_dev, 0, core, s_ctrl, &ctrl); +} + +#define PVR2_SUBDEV_SET_CONTROL(hdw, id, lab) \ + if ((hdw)->lab##_dirty || (hdw)->force_dirty) { \ + pvr2_subdev_set_control(hdw, id, #lab, (hdw)->lab##_val); \ + } + +v4l2_std_id pvr2_hdw_get_detected_std(struct pvr2_hdw *hdw) +{ + v4l2_std_id std; + std = (v4l2_std_id)hdw->std_mask_avail; + v4l2_device_call_all(&hdw->v4l2_dev, 0, + video, querystd, &std); + return std; +} + +/* Execute whatever commands are required to update the state of all the + sub-devices so that they match our current control values. */ +static void pvr2_subdev_update(struct pvr2_hdw *hdw) +{ + struct v4l2_subdev *sd; + unsigned int id; + pvr2_subdev_update_func fp; + + pvr2_trace(PVR2_TRACE_CHIPS, "subdev update..."); + + if (hdw->tuner_updated || hdw->force_dirty) { + struct tuner_setup setup; + pvr2_trace(PVR2_TRACE_CHIPS, "subdev tuner set_type(%d)", + hdw->tuner_type); + if (((int)(hdw->tuner_type)) >= 0) { + memset(&setup, 0, sizeof(setup)); + setup.addr = ADDR_UNSET; + setup.type = hdw->tuner_type; + setup.mode_mask = T_RADIO | T_ANALOG_TV; + v4l2_device_call_all(&hdw->v4l2_dev, 0, + tuner, s_type_addr, &setup); + } + } + + if (hdw->input_dirty || hdw->std_dirty || hdw->force_dirty) { + pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_standard"); + if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { + v4l2_device_call_all(&hdw->v4l2_dev, 0, + tuner, s_radio); + } else { + v4l2_std_id vs; + vs = hdw->std_mask_cur; + v4l2_device_call_all(&hdw->v4l2_dev, 0, + core, s_std, vs); + pvr2_hdw_cx25840_vbi_hack(hdw); + } + hdw->tuner_signal_stale = !0; + hdw->cropcap_stale = !0; + } + + PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_BRIGHTNESS, brightness); + PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_CONTRAST, contrast); + PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_SATURATION, saturation); + PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_HUE, hue); + PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_MUTE, mute); + PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_VOLUME, volume); + PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BALANCE, balance); + PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BASS, bass); + PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_TREBLE, treble); + + if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) { + struct v4l2_tuner vt; + memset(&vt, 0, sizeof(vt)); + vt.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; + vt.audmode = hdw->audiomode_val; + v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt); + } + + if (hdw->freqDirty || hdw->force_dirty) { + unsigned long fv; + struct v4l2_frequency freq; + fv = pvr2_hdw_get_cur_freq(hdw); + pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_freq(%lu)", fv); + if (hdw->tuner_signal_stale) pvr2_hdw_status_poll(hdw); + memset(&freq, 0, sizeof(freq)); + if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) { + /* ((fv * 1000) / 62500) */ + freq.frequency = (fv * 2) / 125; + } else { + freq.frequency = fv / 62500; + } + /* tuner-core currently doesn't seem to care about this, but + let's set it anyway for completeness. */ + if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { + freq.type = V4L2_TUNER_RADIO; + } else { + freq.type = V4L2_TUNER_ANALOG_TV; + } + freq.tuner = 0; + v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, + s_frequency, &freq); + } + + if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) { + struct v4l2_mbus_framefmt fmt; + memset(&fmt, 0, sizeof(fmt)); + fmt.width = hdw->res_hor_val; + fmt.height = hdw->res_ver_val; + fmt.code = V4L2_MBUS_FMT_FIXED; + pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_size(%dx%d)", + fmt.width, fmt.height); + v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_mbus_fmt, &fmt); + } + + if (hdw->srate_dirty || hdw->force_dirty) { + u32 val; + pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_audio %d", + hdw->srate_val); + switch (hdw->srate_val) { + default: + case V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000: + val = 48000; + break; + case V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100: + val = 44100; + break; + case V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000: + val = 32000; + break; + } + v4l2_device_call_all(&hdw->v4l2_dev, 0, + audio, s_clock_freq, val); + } + + /* Unable to set crop parameters; there is apparently no equivalent + for VIDIOC_S_CROP */ + + v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) { + id = sd->grp_id; + if (id >= ARRAY_SIZE(pvr2_module_update_functions)) continue; + fp = pvr2_module_update_functions[id]; + if (!fp) continue; + (*fp)(hdw, sd); + } + + if (hdw->tuner_signal_stale || hdw->cropcap_stale) { + pvr2_hdw_status_poll(hdw); + } +} + + +/* Figure out if we need to commit control changes. If so, mark internal + state flags to indicate this fact and return true. Otherwise do nothing + else and return false. */ +static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw) +{ + unsigned int idx; + struct pvr2_ctrl *cptr; + int value; + int commit_flag = hdw->force_dirty; + char buf[100]; + unsigned int bcnt,ccnt; + + for (idx = 0; idx < hdw->control_cnt; idx++) { + cptr = hdw->controls + idx; + if (!cptr->info->is_dirty) continue; + if (!cptr->info->is_dirty(cptr)) continue; + commit_flag = !0; + + if (!(pvrusb2_debug & PVR2_TRACE_CTL)) continue; + bcnt = scnprintf(buf,sizeof(buf),"\"%s\" <-- ", + cptr->info->name); + value = 0; + cptr->info->get_value(cptr,&value); + pvr2_ctrl_value_to_sym_internal(cptr,~0,value, + buf+bcnt, + sizeof(buf)-bcnt,&ccnt); + bcnt += ccnt; + bcnt += scnprintf(buf+bcnt,sizeof(buf)-bcnt," <%s>", + get_ctrl_typename(cptr->info->type)); + pvr2_trace(PVR2_TRACE_CTL, + "/*--TRACE_COMMIT--*/ %.*s", + bcnt,buf); + } + + if (!commit_flag) { + /* Nothing has changed */ + return 0; + } + + hdw->state_pipeline_config = 0; + trace_stbit("state_pipeline_config",hdw->state_pipeline_config); + pvr2_hdw_state_sched(hdw); + + return !0; +} + + +/* Perform all operations needed to commit all control changes. This must + be performed in synchronization with the pipeline state and is thus + expected to be called as part of the driver's worker thread. Return + true if commit successful, otherwise return false to indicate that + commit isn't possible at this time. */ +static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) +{ + unsigned int idx; + struct pvr2_ctrl *cptr; + int disruptive_change; + + if (hdw->input_dirty && hdw->state_pathway_ok && + (((hdw->input_val == PVR2_CVAL_INPUT_DTV) ? + PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG) != + hdw->pathway_state)) { + /* Change of mode being asked for... */ + hdw->state_pathway_ok = 0; + trace_stbit("state_pathway_ok", hdw->state_pathway_ok); + } + if (!hdw->state_pathway_ok) { + /* Can't commit anything until pathway is ok. */ + return 0; + } + + /* Handle some required side effects when the video standard is + changed.... */ + if (hdw->std_dirty) { + int nvres; + int gop_size; + if (hdw->std_mask_cur & V4L2_STD_525_60) { + nvres = 480; + gop_size = 15; + } else { + nvres = 576; + gop_size = 12; + } + /* Rewrite the vertical resolution to be appropriate to the + video standard that has been selected. */ + if (nvres != hdw->res_ver_val) { + hdw->res_ver_val = nvres; + hdw->res_ver_dirty = !0; + } + /* Rewrite the GOP size to be appropriate to the video + standard that has been selected. */ + if (gop_size != hdw->enc_ctl_state.video_gop_size) { + struct v4l2_ext_controls cs; + struct v4l2_ext_control c1; + memset(&cs, 0, sizeof(cs)); + memset(&c1, 0, sizeof(c1)); + cs.controls = &c1; + cs.count = 1; + c1.id = V4L2_CID_MPEG_VIDEO_GOP_SIZE; + c1.value = gop_size; + cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs, + VIDIOC_S_EXT_CTRLS); + } + } + + /* The broadcast decoder can only scale down, so if + * res_*_dirty && crop window < output format ==> enlarge crop. + * + * The mpeg encoder receives fields of res_hor_val dots and + * res_ver_val halflines. Limits: hor<=720, ver<=576. + */ + if (hdw->res_hor_dirty && hdw->cropw_val < hdw->res_hor_val) { + hdw->cropw_val = hdw->res_hor_val; + hdw->cropw_dirty = !0; + } else if (hdw->cropw_dirty) { + hdw->res_hor_dirty = !0; /* must rescale */ + hdw->res_hor_val = min(720, hdw->cropw_val); + } + if (hdw->res_ver_dirty && hdw->croph_val < hdw->res_ver_val) { + hdw->croph_val = hdw->res_ver_val; + hdw->croph_dirty = !0; + } else if (hdw->croph_dirty) { + int nvres = hdw->std_mask_cur & V4L2_STD_525_60 ? 480 : 576; + hdw->res_ver_dirty = !0; + hdw->res_ver_val = min(nvres, hdw->croph_val); + } + + /* If any of the below has changed, then we can't do the update + while the pipeline is running. Pipeline must be paused first + and decoder -> encoder connection be made quiescent before we + can proceed. */ + disruptive_change = + (hdw->std_dirty || + hdw->enc_unsafe_stale || + hdw->srate_dirty || + hdw->res_ver_dirty || + hdw->res_hor_dirty || + hdw->cropw_dirty || + hdw->croph_dirty || + hdw->input_dirty || + (hdw->active_stream_type != hdw->desired_stream_type)); + if (disruptive_change && !hdw->state_pipeline_idle) { + /* Pipeline is not idle; we can't proceed. Arrange to + cause pipeline to stop so that we can try this again + later.... */ + hdw->state_pipeline_pause = !0; + return 0; + } + + if (hdw->srate_dirty) { + /* Write new sample rate into control structure since + * the master copy is stale. We must track srate + * separate from the mpeg control structure because + * other logic also uses this value. */ + struct v4l2_ext_controls cs; + struct v4l2_ext_control c1; + memset(&cs,0,sizeof(cs)); + memset(&c1,0,sizeof(c1)); + cs.controls = &c1; + cs.count = 1; + c1.id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ; + c1.value = hdw->srate_val; + cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,VIDIOC_S_EXT_CTRLS); + } + + if (hdw->active_stream_type != hdw->desired_stream_type) { + /* Handle any side effects of stream config here */ + hdw->active_stream_type = hdw->desired_stream_type; + } + + if (hdw->hdw_desc->signal_routing_scheme == + PVR2_ROUTING_SCHEME_GOTVIEW) { + u32 b; + /* Handle GOTVIEW audio switching */ + pvr2_hdw_gpio_get_out(hdw,&b); + if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { + /* Set GPIO 11 */ + pvr2_hdw_gpio_chg_out(hdw,(1 << 11),~0); + } else { + /* Clear GPIO 11 */ + pvr2_hdw_gpio_chg_out(hdw,(1 << 11),0); + } + } + + /* Check and update state for all sub-devices. */ + pvr2_subdev_update(hdw); + + hdw->tuner_updated = 0; + hdw->force_dirty = 0; + for (idx = 0; idx < hdw->control_cnt; idx++) { + cptr = hdw->controls + idx; + if (!cptr->info->clear_dirty) continue; + cptr->info->clear_dirty(cptr); + } + + if ((hdw->pathway_state == PVR2_PATHWAY_ANALOG) && + hdw->state_encoder_run) { + /* If encoder isn't running or it can't be touched, then + this will get worked out later when we start the + encoder. */ + if (pvr2_encoder_adjust(hdw) < 0) return !0; + } + + hdw->state_pipeline_config = !0; + /* Hardware state may have changed in a way to cause the cropping + capabilities to have changed. So mark it stale, which will + cause a later re-fetch. */ + trace_stbit("state_pipeline_config",hdw->state_pipeline_config); + return !0; +} + + +int pvr2_hdw_commit_ctl(struct pvr2_hdw *hdw) +{ + int fl; + LOCK_TAKE(hdw->big_lock); + fl = pvr2_hdw_commit_setup(hdw); + LOCK_GIVE(hdw->big_lock); + if (!fl) return 0; + return pvr2_hdw_wait(hdw,0); +} + + +static void pvr2_hdw_worker_poll(struct work_struct *work) +{ + int fl = 0; + struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,workpoll); + LOCK_TAKE(hdw->big_lock); do { + fl = pvr2_hdw_state_eval(hdw); + } while (0); LOCK_GIVE(hdw->big_lock); + if (fl && hdw->state_func) { + hdw->state_func(hdw->state_data); + } +} + + +static int pvr2_hdw_wait(struct pvr2_hdw *hdw,int state) +{ + return wait_event_interruptible( + hdw->state_wait_data, + (hdw->state_stale == 0) && + (!state || (hdw->master_state != state))); +} + + +/* Return name for this driver instance */ +const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw) +{ + return hdw->name; +} + + +const char *pvr2_hdw_get_desc(struct pvr2_hdw *hdw) +{ + return hdw->hdw_desc->description; +} + + +const char *pvr2_hdw_get_type(struct pvr2_hdw *hdw) +{ + return hdw->hdw_desc->shortname; +} + + +int pvr2_hdw_is_hsm(struct pvr2_hdw *hdw) +{ + int result; + LOCK_TAKE(hdw->ctl_lock); do { + hdw->cmd_buffer[0] = FX2CMD_GET_USB_SPEED; + result = pvr2_send_request(hdw, + hdw->cmd_buffer,1, + hdw->cmd_buffer,1); + if (result < 0) break; + result = (hdw->cmd_buffer[0] != 0); + } while(0); LOCK_GIVE(hdw->ctl_lock); + return result; +} + + +/* Execute poll of tuner status */ +void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *hdw) +{ + LOCK_TAKE(hdw->big_lock); do { + pvr2_hdw_status_poll(hdw); + } while (0); LOCK_GIVE(hdw->big_lock); +} + + +static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw) +{ + if (!hdw->cropcap_stale) { + return 0; + } + pvr2_hdw_status_poll(hdw); + if (hdw->cropcap_stale) { + return -EIO; + } + return 0; +} + + +/* Return information about cropping capabilities */ +int pvr2_hdw_get_cropcap(struct pvr2_hdw *hdw, struct v4l2_cropcap *pp) +{ + int stat = 0; + LOCK_TAKE(hdw->big_lock); + stat = pvr2_hdw_check_cropcap(hdw); + if (!stat) { + memcpy(pp, &hdw->cropcap_info, sizeof(hdw->cropcap_info)); + } + LOCK_GIVE(hdw->big_lock); + return stat; +} + + +/* Return information about the tuner */ +int pvr2_hdw_get_tuner_status(struct pvr2_hdw *hdw,struct v4l2_tuner *vtp) +{ + LOCK_TAKE(hdw->big_lock); do { + if (hdw->tuner_signal_stale) { + pvr2_hdw_status_poll(hdw); + } + memcpy(vtp,&hdw->tuner_signal_info,sizeof(struct v4l2_tuner)); + } while (0); LOCK_GIVE(hdw->big_lock); + return 0; +} + + +/* Get handle to video output stream */ +struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *hp) +{ + return hp->vid_stream; +} + + +void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw) +{ + int nr = pvr2_hdw_get_unit_number(hdw); + LOCK_TAKE(hdw->big_lock); do { + printk(KERN_INFO "pvrusb2: ================= START STATUS CARD #%d =================\n", nr); + v4l2_device_call_all(&hdw->v4l2_dev, 0, core, log_status); + pvr2_trace(PVR2_TRACE_INFO,"cx2341x config:"); + cx2341x_log_status(&hdw->enc_ctl_state, "pvrusb2"); + pvr2_hdw_state_log_state(hdw); + printk(KERN_INFO "pvrusb2: ================== END STATUS CARD #%d ==================\n", nr); + } while (0); LOCK_GIVE(hdw->big_lock); +} + + +/* Grab EEPROM contents, needed for direct method. */ +#define EEPROM_SIZE 8192 +#define trace_eeprom(...) pvr2_trace(PVR2_TRACE_EEPROM,__VA_ARGS__) +static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw) +{ + struct i2c_msg msg[2]; + u8 *eeprom; + u8 iadd[2]; + u8 addr; + u16 eepromSize; + unsigned int offs; + int ret; + int mode16 = 0; + unsigned pcnt,tcnt; + eeprom = kmalloc(EEPROM_SIZE,GFP_KERNEL); + if (!eeprom) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Failed to allocate memory" + " required to read eeprom"); + return NULL; + } + + trace_eeprom("Value for eeprom addr from controller was 0x%x", + hdw->eeprom_addr); + addr = hdw->eeprom_addr; + /* Seems that if the high bit is set, then the *real* eeprom + address is shifted right now bit position (noticed this in + newer PVR USB2 hardware) */ + if (addr & 0x80) addr >>= 1; + + /* FX2 documentation states that a 16bit-addressed eeprom is + expected if the I2C address is an odd number (yeah, this is + strange but it's what they do) */ + mode16 = (addr & 1); + eepromSize = (mode16 ? EEPROM_SIZE : 256); + trace_eeprom("Examining %d byte eeprom at location 0x%x" + " using %d bit addressing",eepromSize,addr, + mode16 ? 16 : 8); + + msg[0].addr = addr; + msg[0].flags = 0; + msg[0].len = mode16 ? 2 : 1; + msg[0].buf = iadd; + msg[1].addr = addr; + msg[1].flags = I2C_M_RD; + + /* We have to do the actual eeprom data fetch ourselves, because + (1) we're only fetching part of the eeprom, and (2) if we were + getting the whole thing our I2C driver can't grab it in one + pass - which is what tveeprom is otherwise going to attempt */ + memset(eeprom,0,EEPROM_SIZE); + for (tcnt = 0; tcnt < EEPROM_SIZE; tcnt += pcnt) { + pcnt = 16; + if (pcnt + tcnt > EEPROM_SIZE) pcnt = EEPROM_SIZE-tcnt; + offs = tcnt + (eepromSize - EEPROM_SIZE); + if (mode16) { + iadd[0] = offs >> 8; + iadd[1] = offs; + } else { + iadd[0] = offs; + } + msg[1].len = pcnt; + msg[1].buf = eeprom+tcnt; + if ((ret = i2c_transfer(&hdw->i2c_adap, + msg,ARRAY_SIZE(msg))) != 2) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "eeprom fetch set offs err=%d",ret); + kfree(eeprom); + return NULL; + } + } + return eeprom; +} + + +void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw, + int mode, + int enable_flag) +{ + int ret; + u16 address; + unsigned int pipe; + LOCK_TAKE(hdw->big_lock); do { + if ((hdw->fw_buffer == NULL) == !enable_flag) break; + + if (!enable_flag) { + pvr2_trace(PVR2_TRACE_FIRMWARE, + "Cleaning up after CPU firmware fetch"); + kfree(hdw->fw_buffer); + hdw->fw_buffer = NULL; + hdw->fw_size = 0; + if (hdw->fw_cpu_flag) { + /* Now release the CPU. It will disconnect + and reconnect later. */ + pvr2_hdw_cpureset_assert(hdw,0); + } + break; + } + + hdw->fw_cpu_flag = (mode != 2); + if (hdw->fw_cpu_flag) { + hdw->fw_size = (mode == 1) ? 0x4000 : 0x2000; + pvr2_trace(PVR2_TRACE_FIRMWARE, + "Preparing to suck out CPU firmware" + " (size=%u)", hdw->fw_size); + hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL); + if (!hdw->fw_buffer) { + hdw->fw_size = 0; + break; + } + + /* We have to hold the CPU during firmware upload. */ + pvr2_hdw_cpureset_assert(hdw,1); + + /* download the firmware from address 0000-1fff in 2048 + (=0x800) bytes chunk. */ + + pvr2_trace(PVR2_TRACE_FIRMWARE, + "Grabbing CPU firmware"); + pipe = usb_rcvctrlpipe(hdw->usb_dev, 0); + for(address = 0; address < hdw->fw_size; + address += 0x800) { + ret = usb_control_msg(hdw->usb_dev,pipe, + 0xa0,0xc0, + address,0, + hdw->fw_buffer+address, + 0x800,HZ); + if (ret < 0) break; + } + + pvr2_trace(PVR2_TRACE_FIRMWARE, + "Done grabbing CPU firmware"); + } else { + pvr2_trace(PVR2_TRACE_FIRMWARE, + "Sucking down EEPROM contents"); + hdw->fw_buffer = pvr2_full_eeprom_fetch(hdw); + if (!hdw->fw_buffer) { + pvr2_trace(PVR2_TRACE_FIRMWARE, + "EEPROM content suck failed."); + break; + } + hdw->fw_size = EEPROM_SIZE; + pvr2_trace(PVR2_TRACE_FIRMWARE, + "Done sucking down EEPROM contents"); + } + + } while (0); LOCK_GIVE(hdw->big_lock); +} + + +/* Return true if we're in a mode for retrieval CPU firmware */ +int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw) +{ + return hdw->fw_buffer != NULL; +} + + +int pvr2_hdw_cpufw_get(struct pvr2_hdw *hdw,unsigned int offs, + char *buf,unsigned int cnt) +{ + int ret = -EINVAL; + LOCK_TAKE(hdw->big_lock); do { + if (!buf) break; + if (!cnt) break; + + if (!hdw->fw_buffer) { + ret = -EIO; + break; + } + + if (offs >= hdw->fw_size) { + pvr2_trace(PVR2_TRACE_FIRMWARE, + "Read firmware data offs=%d EOF", + offs); + ret = 0; + break; + } + + if (offs + cnt > hdw->fw_size) cnt = hdw->fw_size - offs; + + memcpy(buf,hdw->fw_buffer+offs,cnt); + + pvr2_trace(PVR2_TRACE_FIRMWARE, + "Read firmware data offs=%d cnt=%d", + offs,cnt); + ret = cnt; + } while (0); LOCK_GIVE(hdw->big_lock); + + return ret; +} + + +int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *hdw, + enum pvr2_v4l_type index) +{ + switch (index) { + case pvr2_v4l_type_video: return hdw->v4l_minor_number_video; + case pvr2_v4l_type_vbi: return hdw->v4l_minor_number_vbi; + case pvr2_v4l_type_radio: return hdw->v4l_minor_number_radio; + default: return -1; + } +} + + +/* Store a v4l minor device number */ +void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *hdw, + enum pvr2_v4l_type index,int v) +{ + switch (index) { + case pvr2_v4l_type_video: hdw->v4l_minor_number_video = v; + case pvr2_v4l_type_vbi: hdw->v4l_minor_number_vbi = v; + case pvr2_v4l_type_radio: hdw->v4l_minor_number_radio = v; + default: break; + } +} + + +static void pvr2_ctl_write_complete(struct urb *urb) +{ + struct pvr2_hdw *hdw = urb->context; + hdw->ctl_write_pend_flag = 0; + if (hdw->ctl_read_pend_flag) return; + complete(&hdw->ctl_done); +} + + +static void pvr2_ctl_read_complete(struct urb *urb) +{ + struct pvr2_hdw *hdw = urb->context; + hdw->ctl_read_pend_flag = 0; + if (hdw->ctl_write_pend_flag) return; + complete(&hdw->ctl_done); +} + + +static void pvr2_ctl_timeout(unsigned long data) +{ + struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; + if (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) { + hdw->ctl_timeout_flag = !0; + if (hdw->ctl_write_pend_flag) + usb_unlink_urb(hdw->ctl_write_urb); + if (hdw->ctl_read_pend_flag) + usb_unlink_urb(hdw->ctl_read_urb); + } +} + + +/* Issue a command and get a response from the device. This extended + version includes a probe flag (which if set means that device errors + should not be logged or treated as fatal) and a timeout in jiffies. + This can be used to non-lethally probe the health of endpoint 1. */ +static int pvr2_send_request_ex(struct pvr2_hdw *hdw, + unsigned int timeout,int probe_fl, + void *write_data,unsigned int write_len, + void *read_data,unsigned int read_len) +{ + unsigned int idx; + int status = 0; + struct timer_list timer; + if (!hdw->ctl_lock_held) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Attempted to execute control transfer" + " without lock!!"); + return -EDEADLK; + } + if (!hdw->flag_ok && !probe_fl) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Attempted to execute control transfer" + " when device not ok"); + return -EIO; + } + if (!(hdw->ctl_read_urb && hdw->ctl_write_urb)) { + if (!probe_fl) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Attempted to execute control transfer" + " when USB is disconnected"); + } + return -ENOTTY; + } + + /* Ensure that we have sane parameters */ + if (!write_data) write_len = 0; + if (!read_data) read_len = 0; + if (write_len > PVR2_CTL_BUFFSIZE) { + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Attempted to execute %d byte" + " control-write transfer (limit=%d)", + write_len,PVR2_CTL_BUFFSIZE); + return -EINVAL; + } + if (read_len > PVR2_CTL_BUFFSIZE) { + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Attempted to execute %d byte" + " control-read transfer (limit=%d)", + write_len,PVR2_CTL_BUFFSIZE); + return -EINVAL; + } + if ((!write_len) && (!read_len)) { + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Attempted to execute null control transfer?"); + return -EINVAL; + } + + + hdw->cmd_debug_state = 1; + if (write_len) { + hdw->cmd_debug_code = ((unsigned char *)write_data)[0]; + } else { + hdw->cmd_debug_code = 0; + } + hdw->cmd_debug_write_len = write_len; + hdw->cmd_debug_read_len = read_len; + + /* Initialize common stuff */ + init_completion(&hdw->ctl_done); + hdw->ctl_timeout_flag = 0; + hdw->ctl_write_pend_flag = 0; + hdw->ctl_read_pend_flag = 0; + init_timer(&timer); + timer.expires = jiffies + timeout; + timer.data = (unsigned long)hdw; + timer.function = pvr2_ctl_timeout; + + if (write_len) { + hdw->cmd_debug_state = 2; + /* Transfer write data to internal buffer */ + for (idx = 0; idx < write_len; idx++) { + hdw->ctl_write_buffer[idx] = + ((unsigned char *)write_data)[idx]; + } + /* Initiate a write request */ + usb_fill_bulk_urb(hdw->ctl_write_urb, + hdw->usb_dev, + usb_sndbulkpipe(hdw->usb_dev, + PVR2_CTL_WRITE_ENDPOINT), + hdw->ctl_write_buffer, + write_len, + pvr2_ctl_write_complete, + hdw); + hdw->ctl_write_urb->actual_length = 0; + hdw->ctl_write_pend_flag = !0; + status = usb_submit_urb(hdw->ctl_write_urb,GFP_KERNEL); + if (status < 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Failed to submit write-control" + " URB status=%d",status); + hdw->ctl_write_pend_flag = 0; + goto done; + } + } + + if (read_len) { + hdw->cmd_debug_state = 3; + memset(hdw->ctl_read_buffer,0x43,read_len); + /* Initiate a read request */ + usb_fill_bulk_urb(hdw->ctl_read_urb, + hdw->usb_dev, + usb_rcvbulkpipe(hdw->usb_dev, + PVR2_CTL_READ_ENDPOINT), + hdw->ctl_read_buffer, + read_len, + pvr2_ctl_read_complete, + hdw); + hdw->ctl_read_urb->actual_length = 0; + hdw->ctl_read_pend_flag = !0; + status = usb_submit_urb(hdw->ctl_read_urb,GFP_KERNEL); + if (status < 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Failed to submit read-control" + " URB status=%d",status); + hdw->ctl_read_pend_flag = 0; + goto done; + } + } + + /* Start timer */ + add_timer(&timer); + + /* Now wait for all I/O to complete */ + hdw->cmd_debug_state = 4; + while (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) { + wait_for_completion(&hdw->ctl_done); + } + hdw->cmd_debug_state = 5; + + /* Stop timer */ + del_timer_sync(&timer); + + hdw->cmd_debug_state = 6; + status = 0; + + if (hdw->ctl_timeout_flag) { + status = -ETIMEDOUT; + if (!probe_fl) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Timed out control-write"); + } + goto done; + } + + if (write_len) { + /* Validate results of write request */ + if ((hdw->ctl_write_urb->status != 0) && + (hdw->ctl_write_urb->status != -ENOENT) && + (hdw->ctl_write_urb->status != -ESHUTDOWN) && + (hdw->ctl_write_urb->status != -ECONNRESET)) { + /* USB subsystem is reporting some kind of failure + on the write */ + status = hdw->ctl_write_urb->status; + if (!probe_fl) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "control-write URB failure," + " status=%d", + status); + } + goto done; + } + if (hdw->ctl_write_urb->actual_length < write_len) { + /* Failed to write enough data */ + status = -EIO; + if (!probe_fl) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "control-write URB short," + " expected=%d got=%d", + write_len, + hdw->ctl_write_urb->actual_length); + } + goto done; + } + } + if (read_len) { + /* Validate results of read request */ + if ((hdw->ctl_read_urb->status != 0) && + (hdw->ctl_read_urb->status != -ENOENT) && + (hdw->ctl_read_urb->status != -ESHUTDOWN) && + (hdw->ctl_read_urb->status != -ECONNRESET)) { + /* USB subsystem is reporting some kind of failure + on the read */ + status = hdw->ctl_read_urb->status; + if (!probe_fl) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "control-read URB failure," + " status=%d", + status); + } + goto done; + } + if (hdw->ctl_read_urb->actual_length < read_len) { + /* Failed to read enough data */ + status = -EIO; + if (!probe_fl) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "control-read URB short," + " expected=%d got=%d", + read_len, + hdw->ctl_read_urb->actual_length); + } + goto done; + } + /* Transfer retrieved data out from internal buffer */ + for (idx = 0; idx < read_len; idx++) { + ((unsigned char *)read_data)[idx] = + hdw->ctl_read_buffer[idx]; + } + } + + done: + + hdw->cmd_debug_state = 0; + if ((status < 0) && (!probe_fl)) { + pvr2_hdw_render_useless(hdw); + } + return status; +} + + +int pvr2_send_request(struct pvr2_hdw *hdw, + void *write_data,unsigned int write_len, + void *read_data,unsigned int read_len) +{ + return pvr2_send_request_ex(hdw,HZ*4,0, + write_data,write_len, + read_data,read_len); +} + + +static int pvr2_issue_simple_cmd(struct pvr2_hdw *hdw,u32 cmdcode) +{ + int ret; + unsigned int cnt = 1; + unsigned int args = 0; + LOCK_TAKE(hdw->ctl_lock); + hdw->cmd_buffer[0] = cmdcode & 0xffu; + args = (cmdcode >> 8) & 0xffu; + args = (args > 2) ? 2 : args; + if (args) { + cnt += args; + hdw->cmd_buffer[1] = (cmdcode >> 16) & 0xffu; + if (args > 1) { + hdw->cmd_buffer[2] = (cmdcode >> 24) & 0xffu; + } + } + if (pvrusb2_debug & PVR2_TRACE_INIT) { + unsigned int idx; + unsigned int ccnt,bcnt; + char tbuf[50]; + cmdcode &= 0xffu; + bcnt = 0; + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + "Sending FX2 command 0x%x",cmdcode); + bcnt += ccnt; + for (idx = 0; idx < ARRAY_SIZE(pvr2_fx2cmd_desc); idx++) { + if (pvr2_fx2cmd_desc[idx].id == cmdcode) { + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + " \"%s\"", + pvr2_fx2cmd_desc[idx].desc); + bcnt += ccnt; + break; + } + } + if (args) { + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + " (%u",hdw->cmd_buffer[1]); + bcnt += ccnt; + if (args > 1) { + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + ",%u",hdw->cmd_buffer[2]); + bcnt += ccnt; + } + ccnt = scnprintf(tbuf+bcnt, + sizeof(tbuf)-bcnt, + ")"); + bcnt += ccnt; + } + pvr2_trace(PVR2_TRACE_INIT,"%.*s",bcnt,tbuf); + } + ret = pvr2_send_request(hdw,hdw->cmd_buffer,cnt,NULL,0); + LOCK_GIVE(hdw->ctl_lock); + return ret; +} + + +int pvr2_write_register(struct pvr2_hdw *hdw, u16 reg, u32 data) +{ + int ret; + + LOCK_TAKE(hdw->ctl_lock); + + hdw->cmd_buffer[0] = FX2CMD_REG_WRITE; /* write register prefix */ + PVR2_DECOMPOSE_LE(hdw->cmd_buffer,1,data); + hdw->cmd_buffer[5] = 0; + hdw->cmd_buffer[6] = (reg >> 8) & 0xff; + hdw->cmd_buffer[7] = reg & 0xff; + + + ret = pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 0); + + LOCK_GIVE(hdw->ctl_lock); + + return ret; +} + + +static int pvr2_read_register(struct pvr2_hdw *hdw, u16 reg, u32 *data) +{ + int ret = 0; + + LOCK_TAKE(hdw->ctl_lock); + + hdw->cmd_buffer[0] = FX2CMD_REG_READ; /* read register prefix */ + hdw->cmd_buffer[1] = 0; + hdw->cmd_buffer[2] = 0; + hdw->cmd_buffer[3] = 0; + hdw->cmd_buffer[4] = 0; + hdw->cmd_buffer[5] = 0; + hdw->cmd_buffer[6] = (reg >> 8) & 0xff; + hdw->cmd_buffer[7] = reg & 0xff; + + ret |= pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 4); + *data = PVR2_COMPOSE_LE(hdw->cmd_buffer,0); + + LOCK_GIVE(hdw->ctl_lock); + + return ret; +} + + +void pvr2_hdw_render_useless(struct pvr2_hdw *hdw) +{ + if (!hdw->flag_ok) return; + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Device being rendered inoperable"); + if (hdw->vid_stream) { + pvr2_stream_setup(hdw->vid_stream,NULL,0,0); + } + hdw->flag_ok = 0; + trace_stbit("flag_ok",hdw->flag_ok); + pvr2_hdw_state_sched(hdw); +} + + +void pvr2_hdw_device_reset(struct pvr2_hdw *hdw) +{ + int ret; + pvr2_trace(PVR2_TRACE_INIT,"Performing a device reset..."); + ret = usb_lock_device_for_reset(hdw->usb_dev,NULL); + if (ret == 0) { + ret = usb_reset_device(hdw->usb_dev); + usb_unlock_device(hdw->usb_dev); + } else { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Failed to lock USB device ret=%d",ret); + } + if (init_pause_msec) { + pvr2_trace(PVR2_TRACE_INFO, + "Waiting %u msec for hardware to settle", + init_pause_msec); + msleep(init_pause_msec); + } + +} + + +void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val) +{ + char *da; + unsigned int pipe; + int ret; + + if (!hdw->usb_dev) return; + + da = kmalloc(16, GFP_KERNEL); + + if (da == NULL) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Unable to allocate memory to control CPU reset"); + return; + } + + pvr2_trace(PVR2_TRACE_INIT,"cpureset_assert(%d)",val); + + da[0] = val ? 0x01 : 0x00; + + /* Write the CPUCS register on the 8051. The lsb of the register + is the reset bit; a 1 asserts reset while a 0 clears it. */ + pipe = usb_sndctrlpipe(hdw->usb_dev, 0); + ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,HZ); + if (ret < 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "cpureset_assert(%d) error=%d",val,ret); + pvr2_hdw_render_useless(hdw); + } + + kfree(da); +} + + +int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *hdw) +{ + return pvr2_issue_simple_cmd(hdw,FX2CMD_DEEP_RESET); +} + + +int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw) +{ + return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_ON); +} + + +int pvr2_hdw_cmd_powerdown(struct pvr2_hdw *hdw) +{ + return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_OFF); +} + + +int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) +{ + pvr2_trace(PVR2_TRACE_INIT, + "Requesting decoder reset"); + if (hdw->decoder_client_id) { + v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, + core, reset, 0); + pvr2_hdw_cx25840_vbi_hack(hdw); + return 0; + } + pvr2_trace(PVR2_TRACE_INIT, + "Unable to reset decoder: nothing attached"); + return -ENOTTY; +} + + +static int pvr2_hdw_cmd_hcw_demod_reset(struct pvr2_hdw *hdw, int onoff) +{ + hdw->flag_ok = !0; + return pvr2_issue_simple_cmd(hdw, + FX2CMD_HCW_DEMOD_RESETIN | + (1 << 8) | + ((onoff ? 1 : 0) << 16)); +} + + +static int pvr2_hdw_cmd_onair_fe_power_ctrl(struct pvr2_hdw *hdw, int onoff) +{ + hdw->flag_ok = !0; + return pvr2_issue_simple_cmd(hdw,(onoff ? + FX2CMD_ONAIR_DTV_POWER_ON : + FX2CMD_ONAIR_DTV_POWER_OFF)); +} + + +static int pvr2_hdw_cmd_onair_digital_path_ctrl(struct pvr2_hdw *hdw, + int onoff) +{ + return pvr2_issue_simple_cmd(hdw,(onoff ? + FX2CMD_ONAIR_DTV_STREAMING_ON : + FX2CMD_ONAIR_DTV_STREAMING_OFF)); +} + + +static void pvr2_hdw_cmd_modeswitch(struct pvr2_hdw *hdw,int digitalFl) +{ + int cmode; + /* Compare digital/analog desired setting with current setting. If + they don't match, fix it... */ + cmode = (digitalFl ? PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG); + if (cmode == hdw->pathway_state) { + /* They match; nothing to do */ + return; + } + + switch (hdw->hdw_desc->digital_control_scheme) { + case PVR2_DIGITAL_SCHEME_HAUPPAUGE: + pvr2_hdw_cmd_hcw_demod_reset(hdw,digitalFl); + if (cmode == PVR2_PATHWAY_ANALOG) { + /* If moving to analog mode, also force the decoder + to reset. If no decoder is attached, then it's + ok to ignore this because if/when the decoder + attaches, it will reset itself at that time. */ + pvr2_hdw_cmd_decoder_reset(hdw); + } + break; + case PVR2_DIGITAL_SCHEME_ONAIR: + /* Supposedly we should always have the power on whether in + digital or analog mode. But for now do what appears to + work... */ + pvr2_hdw_cmd_onair_fe_power_ctrl(hdw,digitalFl); + break; + default: break; + } + + pvr2_hdw_untrip_unlocked(hdw); + hdw->pathway_state = cmode; +} + + +static void pvr2_led_ctrl_hauppauge(struct pvr2_hdw *hdw, int onoff) +{ + /* change some GPIO data + * + * note: bit d7 of dir appears to control the LED, + * so we shut it off here. + * + */ + if (onoff) { + pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000481); + } else { + pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000401); + } + pvr2_hdw_gpio_chg_out(hdw, 0xffffffff, 0x00000000); +} + + +typedef void (*led_method_func)(struct pvr2_hdw *,int); + +static led_method_func led_methods[] = { + [PVR2_LED_SCHEME_HAUPPAUGE] = pvr2_led_ctrl_hauppauge, +}; + + +/* Toggle LED */ +static void pvr2_led_ctrl(struct pvr2_hdw *hdw,int onoff) +{ + unsigned int scheme_id; + led_method_func fp; + + if ((!onoff) == (!hdw->led_on)) return; + + hdw->led_on = onoff != 0; + + scheme_id = hdw->hdw_desc->led_scheme; + if (scheme_id < ARRAY_SIZE(led_methods)) { + fp = led_methods[scheme_id]; + } else { + fp = NULL; + } + + if (fp) (*fp)(hdw,onoff); +} + + +/* Stop / start video stream transport */ +static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl) +{ + int ret; + + /* If we're in analog mode, then just issue the usual analog + command. */ + if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) { + return pvr2_issue_simple_cmd(hdw, + (runFl ? + FX2CMD_STREAMING_ON : + FX2CMD_STREAMING_OFF)); + /*Note: Not reached */ + } + + if (hdw->pathway_state != PVR2_PATHWAY_DIGITAL) { + /* Whoops, we don't know what mode we're in... */ + return -EINVAL; + } + + /* To get here we have to be in digital mode. The mechanism here + is unfortunately different for different vendors. So we switch + on the device's digital scheme attribute in order to figure out + what to do. */ + switch (hdw->hdw_desc->digital_control_scheme) { + case PVR2_DIGITAL_SCHEME_HAUPPAUGE: + return pvr2_issue_simple_cmd(hdw, + (runFl ? + FX2CMD_HCW_DTV_STREAMING_ON : + FX2CMD_HCW_DTV_STREAMING_OFF)); + case PVR2_DIGITAL_SCHEME_ONAIR: + ret = pvr2_issue_simple_cmd(hdw, + (runFl ? + FX2CMD_STREAMING_ON : + FX2CMD_STREAMING_OFF)); + if (ret) return ret; + return pvr2_hdw_cmd_onair_digital_path_ctrl(hdw,runFl); + default: + return -EINVAL; + } +} + + +/* Evaluate whether or not state_pathway_ok can change */ +static int state_eval_pathway_ok(struct pvr2_hdw *hdw) +{ + if (hdw->state_pathway_ok) { + /* Nothing to do if pathway is already ok */ + return 0; + } + if (!hdw->state_pipeline_idle) { + /* Not allowed to change anything if pipeline is not idle */ + return 0; + } + pvr2_hdw_cmd_modeswitch(hdw,hdw->input_val == PVR2_CVAL_INPUT_DTV); + hdw->state_pathway_ok = !0; + trace_stbit("state_pathway_ok",hdw->state_pathway_ok); + return !0; +} + + +/* Evaluate whether or not state_encoder_ok can change */ +static int state_eval_encoder_ok(struct pvr2_hdw *hdw) +{ + if (hdw->state_encoder_ok) return 0; + if (hdw->flag_tripped) return 0; + if (hdw->state_encoder_run) return 0; + if (hdw->state_encoder_config) return 0; + if (hdw->state_decoder_run) return 0; + if (hdw->state_usbstream_run) return 0; + if (hdw->pathway_state == PVR2_PATHWAY_DIGITAL) { + if (!hdw->hdw_desc->flag_digital_requires_cx23416) return 0; + } else if (hdw->pathway_state != PVR2_PATHWAY_ANALOG) { + return 0; + } + + if (pvr2_upload_firmware2(hdw) < 0) { + hdw->flag_tripped = !0; + trace_stbit("flag_tripped",hdw->flag_tripped); + return !0; + } + hdw->state_encoder_ok = !0; + trace_stbit("state_encoder_ok",hdw->state_encoder_ok); + return !0; +} + + +/* Evaluate whether or not state_encoder_config can change */ +static int state_eval_encoder_config(struct pvr2_hdw *hdw) +{ + if (hdw->state_encoder_config) { + if (hdw->state_encoder_ok) { + if (hdw->state_pipeline_req && + !hdw->state_pipeline_pause) return 0; + } + hdw->state_encoder_config = 0; + hdw->state_encoder_waitok = 0; + trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok); + /* paranoia - solve race if timer just completed */ + del_timer_sync(&hdw->encoder_wait_timer); + } else { + if (!hdw->state_pathway_ok || + (hdw->pathway_state != PVR2_PATHWAY_ANALOG) || + !hdw->state_encoder_ok || + !hdw->state_pipeline_idle || + hdw->state_pipeline_pause || + !hdw->state_pipeline_req || + !hdw->state_pipeline_config) { + /* We must reset the enforced wait interval if + anything has happened that might have disturbed + the encoder. This should be a rare case. */ + if (timer_pending(&hdw->encoder_wait_timer)) { + del_timer_sync(&hdw->encoder_wait_timer); + } + if (hdw->state_encoder_waitok) { + /* Must clear the state - therefore we did + something to a state bit and must also + return true. */ + hdw->state_encoder_waitok = 0; + trace_stbit("state_encoder_waitok", + hdw->state_encoder_waitok); + return !0; + } + return 0; + } + if (!hdw->state_encoder_waitok) { + if (!timer_pending(&hdw->encoder_wait_timer)) { + /* waitok flag wasn't set and timer isn't + running. Check flag once more to avoid + a race then start the timer. This is + the point when we measure out a minimal + quiet interval before doing something to + the encoder. */ + if (!hdw->state_encoder_waitok) { + hdw->encoder_wait_timer.expires = + jiffies + + (HZ * TIME_MSEC_ENCODER_WAIT + / 1000); + add_timer(&hdw->encoder_wait_timer); + } + } + /* We can't continue until we know we have been + quiet for the interval measured by this + timer. */ + return 0; + } + pvr2_encoder_configure(hdw); + if (hdw->state_encoder_ok) hdw->state_encoder_config = !0; + } + trace_stbit("state_encoder_config",hdw->state_encoder_config); + return !0; +} + + +/* Return true if the encoder should not be running. */ +static int state_check_disable_encoder_run(struct pvr2_hdw *hdw) +{ + if (!hdw->state_encoder_ok) { + /* Encoder isn't healthy at the moment, so stop it. */ + return !0; + } + if (!hdw->state_pathway_ok) { + /* Mode is not understood at the moment (i.e. it wants to + change), so encoder must be stopped. */ + return !0; + } + + switch (hdw->pathway_state) { + case PVR2_PATHWAY_ANALOG: + if (!hdw->state_decoder_run) { + /* We're in analog mode and the decoder is not + running; thus the encoder should be stopped as + well. */ + return !0; + } + break; + case PVR2_PATHWAY_DIGITAL: + if (hdw->state_encoder_runok) { + /* This is a funny case. We're in digital mode so + really the encoder should be stopped. However + if it really is running, only kill it after + runok has been set. This gives a chance for the + onair quirk to function (encoder must run + briefly first, at least once, before onair + digital streaming can work). */ + return !0; + } + break; + default: + /* Unknown mode; so encoder should be stopped. */ + return !0; + } + + /* If we get here, we haven't found a reason to stop the + encoder. */ + return 0; +} + + +/* Return true if the encoder should be running. */ +static int state_check_enable_encoder_run(struct pvr2_hdw *hdw) +{ + if (!hdw->state_encoder_ok) { + /* Don't run the encoder if it isn't healthy... */ + return 0; + } + if (!hdw->state_pathway_ok) { + /* Don't run the encoder if we don't (yet) know what mode + we need to be in... */ + return 0; + } + + switch (hdw->pathway_state) { + case PVR2_PATHWAY_ANALOG: + if (hdw->state_decoder_run && hdw->state_decoder_ready) { + /* In analog mode, if the decoder is running, then + run the encoder. */ + return !0; + } + break; + case PVR2_PATHWAY_DIGITAL: + if ((hdw->hdw_desc->digital_control_scheme == + PVR2_DIGITAL_SCHEME_ONAIR) && + !hdw->state_encoder_runok) { + /* This is a quirk. OnAir hardware won't stream + digital until the encoder has been run at least + once, for a minimal period of time (empiricially + measured to be 1/4 second). So if we're on + OnAir hardware and the encoder has never been + run at all, then start the encoder. Normal + state machine logic in the driver will + automatically handle the remaining bits. */ + return !0; + } + break; + default: + /* For completeness (unknown mode; encoder won't run ever) */ + break; + } + /* If we get here, then we haven't found any reason to run the + encoder, so don't run it. */ + return 0; +} + + +/* Evaluate whether or not state_encoder_run can change */ +static int state_eval_encoder_run(struct pvr2_hdw *hdw) +{ + if (hdw->state_encoder_run) { + if (!state_check_disable_encoder_run(hdw)) return 0; + if (hdw->state_encoder_ok) { + del_timer_sync(&hdw->encoder_run_timer); + if (pvr2_encoder_stop(hdw) < 0) return !0; + } + hdw->state_encoder_run = 0; + } else { + if (!state_check_enable_encoder_run(hdw)) return 0; + if (pvr2_encoder_start(hdw) < 0) return !0; + hdw->state_encoder_run = !0; + if (!hdw->state_encoder_runok) { + hdw->encoder_run_timer.expires = + jiffies + (HZ * TIME_MSEC_ENCODER_OK / 1000); + add_timer(&hdw->encoder_run_timer); + } + } + trace_stbit("state_encoder_run",hdw->state_encoder_run); + return !0; +} + + +/* Timeout function for quiescent timer. */ +static void pvr2_hdw_quiescent_timeout(unsigned long data) +{ + struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; + hdw->state_decoder_quiescent = !0; + trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent); + hdw->state_stale = !0; + queue_work(hdw->workqueue,&hdw->workpoll); +} + + +/* Timeout function for decoder stabilization timer. */ +static void pvr2_hdw_decoder_stabilization_timeout(unsigned long data) +{ + struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; + hdw->state_decoder_ready = !0; + trace_stbit("state_decoder_ready", hdw->state_decoder_ready); + hdw->state_stale = !0; + queue_work(hdw->workqueue, &hdw->workpoll); +} + + +/* Timeout function for encoder wait timer. */ +static void pvr2_hdw_encoder_wait_timeout(unsigned long data) +{ + struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; + hdw->state_encoder_waitok = !0; + trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok); + hdw->state_stale = !0; + queue_work(hdw->workqueue,&hdw->workpoll); +} + + +/* Timeout function for encoder run timer. */ +static void pvr2_hdw_encoder_run_timeout(unsigned long data) +{ + struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; + if (!hdw->state_encoder_runok) { + hdw->state_encoder_runok = !0; + trace_stbit("state_encoder_runok",hdw->state_encoder_runok); + hdw->state_stale = !0; + queue_work(hdw->workqueue,&hdw->workpoll); + } +} + + +/* Evaluate whether or not state_decoder_run can change */ +static int state_eval_decoder_run(struct pvr2_hdw *hdw) +{ + if (hdw->state_decoder_run) { + if (hdw->state_encoder_ok) { + if (hdw->state_pipeline_req && + !hdw->state_pipeline_pause && + hdw->state_pathway_ok) return 0; + } + if (!hdw->flag_decoder_missed) { + pvr2_decoder_enable(hdw,0); + } + hdw->state_decoder_quiescent = 0; + hdw->state_decoder_run = 0; + /* paranoia - solve race if timer(s) just completed */ + del_timer_sync(&hdw->quiescent_timer); + /* Kill the stabilization timer, in case we're killing the + encoder before the previous stabilization interval has + been properly timed. */ + del_timer_sync(&hdw->decoder_stabilization_timer); + hdw->state_decoder_ready = 0; + } else { + if (!hdw->state_decoder_quiescent) { + if (!timer_pending(&hdw->quiescent_timer)) { + /* We don't do something about the + quiescent timer until right here because + we also want to catch cases where the + decoder was already not running (like + after initialization) as opposed to + knowing that we had just stopped it. + The second flag check is here to cover a + race - the timer could have run and set + this flag just after the previous check + but before we did the pending check. */ + if (!hdw->state_decoder_quiescent) { + hdw->quiescent_timer.expires = + jiffies + + (HZ * TIME_MSEC_DECODER_WAIT + / 1000); + add_timer(&hdw->quiescent_timer); + } + } + /* Don't allow decoder to start again until it has + been quiesced first. This little detail should + hopefully further stabilize the encoder. */ + return 0; + } + if (!hdw->state_pathway_ok || + (hdw->pathway_state != PVR2_PATHWAY_ANALOG) || + !hdw->state_pipeline_req || + hdw->state_pipeline_pause || + !hdw->state_pipeline_config || + !hdw->state_encoder_config || + !hdw->state_encoder_ok) return 0; + del_timer_sync(&hdw->quiescent_timer); + if (hdw->flag_decoder_missed) return 0; + if (pvr2_decoder_enable(hdw,!0) < 0) return 0; + hdw->state_decoder_quiescent = 0; + hdw->state_decoder_ready = 0; + hdw->state_decoder_run = !0; + if (hdw->decoder_client_id == PVR2_CLIENT_ID_SAA7115) { + hdw->decoder_stabilization_timer.expires = + jiffies + + (HZ * TIME_MSEC_DECODER_STABILIZATION_WAIT / + 1000); + add_timer(&hdw->decoder_stabilization_timer); + } else { + hdw->state_decoder_ready = !0; + } + } + trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent); + trace_stbit("state_decoder_run",hdw->state_decoder_run); + trace_stbit("state_decoder_ready", hdw->state_decoder_ready); + return !0; +} + + +/* Evaluate whether or not state_usbstream_run can change */ +static int state_eval_usbstream_run(struct pvr2_hdw *hdw) +{ + if (hdw->state_usbstream_run) { + int fl = !0; + if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) { + fl = (hdw->state_encoder_ok && + hdw->state_encoder_run); + } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) && + (hdw->hdw_desc->flag_digital_requires_cx23416)) { + fl = hdw->state_encoder_ok; + } + if (fl && + hdw->state_pipeline_req && + !hdw->state_pipeline_pause && + hdw->state_pathway_ok) { + return 0; + } + pvr2_hdw_cmd_usbstream(hdw,0); + hdw->state_usbstream_run = 0; + } else { + if (!hdw->state_pipeline_req || + hdw->state_pipeline_pause || + !hdw->state_pathway_ok) return 0; + if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) { + if (!hdw->state_encoder_ok || + !hdw->state_encoder_run) return 0; + } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) && + (hdw->hdw_desc->flag_digital_requires_cx23416)) { + if (!hdw->state_encoder_ok) return 0; + if (hdw->state_encoder_run) return 0; + if (hdw->hdw_desc->digital_control_scheme == + PVR2_DIGITAL_SCHEME_ONAIR) { + /* OnAir digital receivers won't stream + unless the analog encoder has run first. + Why? I have no idea. But don't even + try until we know the analog side is + known to have run. */ + if (!hdw->state_encoder_runok) return 0; + } + } + if (pvr2_hdw_cmd_usbstream(hdw,!0) < 0) return 0; + hdw->state_usbstream_run = !0; + } + trace_stbit("state_usbstream_run",hdw->state_usbstream_run); + return !0; +} + + +/* Attempt to configure pipeline, if needed */ +static int state_eval_pipeline_config(struct pvr2_hdw *hdw) +{ + if (hdw->state_pipeline_config || + hdw->state_pipeline_pause) return 0; + pvr2_hdw_commit_execute(hdw); + return !0; +} + + +/* Update pipeline idle and pipeline pause tracking states based on other + inputs. This must be called whenever the other relevant inputs have + changed. */ +static int state_update_pipeline_state(struct pvr2_hdw *hdw) +{ + unsigned int st; + int updatedFl = 0; + /* Update pipeline state */ + st = !(hdw->state_encoder_run || + hdw->state_decoder_run || + hdw->state_usbstream_run || + (!hdw->state_decoder_quiescent)); + if (!st != !hdw->state_pipeline_idle) { + hdw->state_pipeline_idle = st; + updatedFl = !0; + } + if (hdw->state_pipeline_idle && hdw->state_pipeline_pause) { + hdw->state_pipeline_pause = 0; + updatedFl = !0; + } + return updatedFl; +} + + +typedef int (*state_eval_func)(struct pvr2_hdw *); + +/* Set of functions to be run to evaluate various states in the driver. */ +static const state_eval_func eval_funcs[] = { + state_eval_pathway_ok, + state_eval_pipeline_config, + state_eval_encoder_ok, + state_eval_encoder_config, + state_eval_decoder_run, + state_eval_encoder_run, + state_eval_usbstream_run, +}; + + +/* Process various states and return true if we did anything interesting. */ +static int pvr2_hdw_state_update(struct pvr2_hdw *hdw) +{ + unsigned int i; + int state_updated = 0; + int check_flag; + + if (!hdw->state_stale) return 0; + if ((hdw->fw1_state != FW1_STATE_OK) || + !hdw->flag_ok) { + hdw->state_stale = 0; + return !0; + } + /* This loop is the heart of the entire driver. It keeps trying to + evaluate various bits of driver state until nothing changes for + one full iteration. Each "bit of state" tracks some global + aspect of the driver, e.g. whether decoder should run, if + pipeline is configured, usb streaming is on, etc. We separately + evaluate each of those questions based on other driver state to + arrive at the correct running configuration. */ + do { + check_flag = 0; + state_update_pipeline_state(hdw); + /* Iterate over each bit of state */ + for (i = 0; (i<ARRAY_SIZE(eval_funcs)) && hdw->flag_ok; i++) { + if ((*eval_funcs[i])(hdw)) { + check_flag = !0; + state_updated = !0; + state_update_pipeline_state(hdw); + } + } + } while (check_flag && hdw->flag_ok); + hdw->state_stale = 0; + trace_stbit("state_stale",hdw->state_stale); + return state_updated; +} + + +static unsigned int print_input_mask(unsigned int msk, + char *buf,unsigned int acnt) +{ + unsigned int idx,ccnt; + unsigned int tcnt = 0; + for (idx = 0; idx < ARRAY_SIZE(control_values_input); idx++) { + if (!((1 << idx) & msk)) continue; + ccnt = scnprintf(buf+tcnt, + acnt-tcnt, + "%s%s", + (tcnt ? ", " : ""), + control_values_input[idx]); + tcnt += ccnt; + } + return tcnt; +} + + +static const char *pvr2_pathway_state_name(int id) +{ + switch (id) { + case PVR2_PATHWAY_ANALOG: return "analog"; + case PVR2_PATHWAY_DIGITAL: return "digital"; + default: return "unknown"; + } +} + + +static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which, + char *buf,unsigned int acnt) +{ + switch (which) { + case 0: + return scnprintf( + buf,acnt, + "driver:%s%s%s%s%s <mode=%s>", + (hdw->flag_ok ? " <ok>" : " <fail>"), + (hdw->flag_init_ok ? " <init>" : " <uninitialized>"), + (hdw->flag_disconnected ? " <disconnected>" : + " <connected>"), + (hdw->flag_tripped ? " <tripped>" : ""), + (hdw->flag_decoder_missed ? " <no decoder>" : ""), + pvr2_pathway_state_name(hdw->pathway_state)); + + case 1: + return scnprintf( + buf,acnt, + "pipeline:%s%s%s%s", + (hdw->state_pipeline_idle ? " <idle>" : ""), + (hdw->state_pipeline_config ? + " <configok>" : " <stale>"), + (hdw->state_pipeline_req ? " <req>" : ""), + (hdw->state_pipeline_pause ? " <pause>" : "")); + case 2: + return scnprintf( + buf,acnt, + "worker:%s%s%s%s%s%s%s", + (hdw->state_decoder_run ? + (hdw->state_decoder_ready ? + "<decode:run>" : " <decode:start>") : + (hdw->state_decoder_quiescent ? + "" : " <decode:stop>")), + (hdw->state_decoder_quiescent ? + " <decode:quiescent>" : ""), + (hdw->state_encoder_ok ? + "" : " <encode:init>"), + (hdw->state_encoder_run ? + (hdw->state_encoder_runok ? + " <encode:run>" : + " <encode:firstrun>") : + (hdw->state_encoder_runok ? + " <encode:stop>" : + " <encode:virgin>")), + (hdw->state_encoder_config ? + " <encode:configok>" : + (hdw->state_encoder_waitok ? + "" : " <encode:waitok>")), + (hdw->state_usbstream_run ? + " <usb:run>" : " <usb:stop>"), + (hdw->state_pathway_ok ? + " <pathway:ok>" : "")); + case 3: + return scnprintf( + buf,acnt, + "state: %s", + pvr2_get_state_name(hdw->master_state)); + case 4: { + unsigned int tcnt = 0; + unsigned int ccnt; + + ccnt = scnprintf(buf, + acnt, + "Hardware supported inputs: "); + tcnt += ccnt; + tcnt += print_input_mask(hdw->input_avail_mask, + buf+tcnt, + acnt-tcnt); + if (hdw->input_avail_mask != hdw->input_allowed_mask) { + ccnt = scnprintf(buf+tcnt, + acnt-tcnt, + "; allowed inputs: "); + tcnt += ccnt; + tcnt += print_input_mask(hdw->input_allowed_mask, + buf+tcnt, + acnt-tcnt); + } + return tcnt; + } + case 5: { + struct pvr2_stream_stats stats; + if (!hdw->vid_stream) break; + pvr2_stream_get_stats(hdw->vid_stream, + &stats, + 0); + return scnprintf( + buf,acnt, + "Bytes streamed=%u" + " URBs: queued=%u idle=%u ready=%u" + " processed=%u failed=%u", + stats.bytes_processed, + stats.buffers_in_queue, + stats.buffers_in_idle, + stats.buffers_in_ready, + stats.buffers_processed, + stats.buffers_failed); + } + case 6: { + unsigned int id = hdw->ir_scheme_active; + return scnprintf(buf, acnt, "ir scheme: id=%d %s", id, + (id >= ARRAY_SIZE(ir_scheme_names) ? + "?" : ir_scheme_names[id])); + } + default: break; + } + return 0; +} + + +/* Generate report containing info about attached sub-devices and attached + i2c clients, including an indication of which attached i2c clients are + actually sub-devices. */ +static unsigned int pvr2_hdw_report_clients(struct pvr2_hdw *hdw, + char *buf, unsigned int acnt) +{ + struct v4l2_subdev *sd; + unsigned int tcnt = 0; + unsigned int ccnt; + struct i2c_client *client; + const char *p; + unsigned int id; + + ccnt = scnprintf(buf, acnt, "Associated v4l2-subdev drivers and I2C clients:\n"); + tcnt += ccnt; + v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) { + id = sd->grp_id; + p = NULL; + if (id < ARRAY_SIZE(module_names)) p = module_names[id]; + if (p) { + ccnt = scnprintf(buf + tcnt, acnt - tcnt, " %s:", p); + tcnt += ccnt; + } else { + ccnt = scnprintf(buf + tcnt, acnt - tcnt, + " (unknown id=%u):", id); + tcnt += ccnt; + } + client = v4l2_get_subdevdata(sd); + if (client) { + ccnt = scnprintf(buf + tcnt, acnt - tcnt, + " %s @ %02x\n", client->name, + client->addr); + tcnt += ccnt; + } else { + ccnt = scnprintf(buf + tcnt, acnt - tcnt, + " no i2c client\n"); + tcnt += ccnt; + } + } + return tcnt; +} + + +unsigned int pvr2_hdw_state_report(struct pvr2_hdw *hdw, + char *buf,unsigned int acnt) +{ + unsigned int bcnt,ccnt,idx; + bcnt = 0; + LOCK_TAKE(hdw->big_lock); + for (idx = 0; ; idx++) { + ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,acnt); + if (!ccnt) break; + bcnt += ccnt; acnt -= ccnt; buf += ccnt; + if (!acnt) break; + buf[0] = '\n'; ccnt = 1; + bcnt += ccnt; acnt -= ccnt; buf += ccnt; + } + ccnt = pvr2_hdw_report_clients(hdw, buf, acnt); + bcnt += ccnt; acnt -= ccnt; buf += ccnt; + LOCK_GIVE(hdw->big_lock); + return bcnt; +} + + +static void pvr2_hdw_state_log_state(struct pvr2_hdw *hdw) +{ + char buf[256]; + unsigned int idx, ccnt; + unsigned int lcnt, ucnt; + + for (idx = 0; ; idx++) { + ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,sizeof(buf)); + if (!ccnt) break; + printk(KERN_INFO "%s %.*s\n",hdw->name,ccnt,buf); + } + ccnt = pvr2_hdw_report_clients(hdw, buf, sizeof(buf)); + ucnt = 0; + while (ucnt < ccnt) { + lcnt = 0; + while ((lcnt + ucnt < ccnt) && (buf[lcnt + ucnt] != '\n')) { + lcnt++; + } + printk(KERN_INFO "%s %.*s\n", hdw->name, lcnt, buf + ucnt); + ucnt += lcnt + 1; + } +} + + +/* Evaluate and update the driver's current state, taking various actions + as appropriate for the update. */ +static int pvr2_hdw_state_eval(struct pvr2_hdw *hdw) +{ + unsigned int st; + int state_updated = 0; + int callback_flag = 0; + int analog_mode; + + pvr2_trace(PVR2_TRACE_STBITS, + "Drive state check START"); + if (pvrusb2_debug & PVR2_TRACE_STBITS) { + pvr2_hdw_state_log_state(hdw); + } + + /* Process all state and get back over disposition */ + state_updated = pvr2_hdw_state_update(hdw); + + analog_mode = (hdw->pathway_state != PVR2_PATHWAY_DIGITAL); + + /* Update master state based upon all other states. */ + if (!hdw->flag_ok) { + st = PVR2_STATE_DEAD; + } else if (hdw->fw1_state != FW1_STATE_OK) { + st = PVR2_STATE_COLD; + } else if ((analog_mode || + hdw->hdw_desc->flag_digital_requires_cx23416) && + !hdw->state_encoder_ok) { + st = PVR2_STATE_WARM; + } else if (hdw->flag_tripped || + (analog_mode && hdw->flag_decoder_missed)) { + st = PVR2_STATE_ERROR; + } else if (hdw->state_usbstream_run && + (!analog_mode || + (hdw->state_encoder_run && hdw->state_decoder_run))) { + st = PVR2_STATE_RUN; + } else { + st = PVR2_STATE_READY; + } + if (hdw->master_state != st) { + pvr2_trace(PVR2_TRACE_STATE, + "Device state change from %s to %s", + pvr2_get_state_name(hdw->master_state), + pvr2_get_state_name(st)); + pvr2_led_ctrl(hdw,st == PVR2_STATE_RUN); + hdw->master_state = st; + state_updated = !0; + callback_flag = !0; + } + if (state_updated) { + /* Trigger anyone waiting on any state changes here. */ + wake_up(&hdw->state_wait_data); + } + + if (pvrusb2_debug & PVR2_TRACE_STBITS) { + pvr2_hdw_state_log_state(hdw); + } + pvr2_trace(PVR2_TRACE_STBITS, + "Drive state check DONE callback=%d",callback_flag); + + return callback_flag; +} + + +/* Cause kernel thread to check / update driver state */ +static void pvr2_hdw_state_sched(struct pvr2_hdw *hdw) +{ + if (hdw->state_stale) return; + hdw->state_stale = !0; + trace_stbit("state_stale",hdw->state_stale); + queue_work(hdw->workqueue,&hdw->workpoll); +} + + +int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *dp) +{ + return pvr2_read_register(hdw,PVR2_GPIO_DIR,dp); +} + + +int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *dp) +{ + return pvr2_read_register(hdw,PVR2_GPIO_OUT,dp); +} + + +int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *dp) +{ + return pvr2_read_register(hdw,PVR2_GPIO_IN,dp); +} + + +int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val) +{ + u32 cval,nval; + int ret; + if (~msk) { + ret = pvr2_read_register(hdw,PVR2_GPIO_DIR,&cval); + if (ret) return ret; + nval = (cval & ~msk) | (val & msk); + pvr2_trace(PVR2_TRACE_GPIO, + "GPIO direction changing 0x%x:0x%x" + " from 0x%x to 0x%x", + msk,val,cval,nval); + } else { + nval = val; + pvr2_trace(PVR2_TRACE_GPIO, + "GPIO direction changing to 0x%x",nval); + } + return pvr2_write_register(hdw,PVR2_GPIO_DIR,nval); +} + + +int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val) +{ + u32 cval,nval; + int ret; + if (~msk) { + ret = pvr2_read_register(hdw,PVR2_GPIO_OUT,&cval); + if (ret) return ret; + nval = (cval & ~msk) | (val & msk); + pvr2_trace(PVR2_TRACE_GPIO, + "GPIO output changing 0x%x:0x%x from 0x%x to 0x%x", + msk,val,cval,nval); + } else { + nval = val; + pvr2_trace(PVR2_TRACE_GPIO, + "GPIO output changing to 0x%x",nval); + } + return pvr2_write_register(hdw,PVR2_GPIO_OUT,nval); +} + + +void pvr2_hdw_status_poll(struct pvr2_hdw *hdw) +{ + struct v4l2_tuner *vtp = &hdw->tuner_signal_info; + memset(vtp, 0, sizeof(*vtp)); + vtp->type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; + hdw->tuner_signal_stale = 0; + /* Note: There apparently is no replacement for VIDIOC_CROPCAP + using v4l2-subdev - therefore we can't support that AT ALL right + now. (Of course, no sub-drivers seem to implement it either. + But now it's a a chicken and egg problem...) */ + v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner, vtp); + pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll" + " type=%u strength=%u audio=0x%x cap=0x%x" + " low=%u hi=%u", + vtp->type, + vtp->signal, vtp->rxsubchans, vtp->capability, + vtp->rangelow, vtp->rangehigh); + + /* We have to do this to avoid getting into constant polling if + there's nobody to answer a poll of cropcap info. */ + hdw->cropcap_stale = 0; +} + + +unsigned int pvr2_hdw_get_input_available(struct pvr2_hdw *hdw) +{ + return hdw->input_avail_mask; +} + + +unsigned int pvr2_hdw_get_input_allowed(struct pvr2_hdw *hdw) +{ + return hdw->input_allowed_mask; +} + + +static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v) +{ + if (hdw->input_val != v) { + hdw->input_val = v; + hdw->input_dirty = !0; + } + + /* Handle side effects - if we switch to a mode that needs the RF + tuner, then select the right frequency choice as well and mark + it dirty. */ + if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) { + hdw->freqSelector = 0; + hdw->freqDirty = !0; + } else if ((hdw->input_val == PVR2_CVAL_INPUT_TV) || + (hdw->input_val == PVR2_CVAL_INPUT_DTV)) { + hdw->freqSelector = 1; + hdw->freqDirty = !0; + } + return 0; +} + + +int pvr2_hdw_set_input_allowed(struct pvr2_hdw *hdw, + unsigned int change_mask, + unsigned int change_val) +{ + int ret = 0; + unsigned int nv,m,idx; + LOCK_TAKE(hdw->big_lock); + do { + nv = hdw->input_allowed_mask & ~change_mask; + nv |= (change_val & change_mask); + nv &= hdw->input_avail_mask; + if (!nv) { + /* No legal modes left; return error instead. */ + ret = -EPERM; + break; + } + hdw->input_allowed_mask = nv; + if ((1 << hdw->input_val) & hdw->input_allowed_mask) { + /* Current mode is still in the allowed mask, so + we're done. */ + break; + } + /* Select and switch to a mode that is still in the allowed + mask */ + if (!hdw->input_allowed_mask) { + /* Nothing legal; give up */ + break; + } + m = hdw->input_allowed_mask; + for (idx = 0; idx < (sizeof(m) << 3); idx++) { + if (!((1 << idx) & m)) continue; + pvr2_hdw_set_input(hdw,idx); + break; + } + } while (0); + LOCK_GIVE(hdw->big_lock); + return ret; +} + + +/* Find I2C address of eeprom */ +static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw) +{ + int result; + LOCK_TAKE(hdw->ctl_lock); do { + hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR; + result = pvr2_send_request(hdw, + hdw->cmd_buffer,1, + hdw->cmd_buffer,1); + if (result < 0) break; + result = hdw->cmd_buffer[0]; + } while(0); LOCK_GIVE(hdw->ctl_lock); + return result; +} + + +int pvr2_hdw_register_access(struct pvr2_hdw *hdw, + struct v4l2_dbg_match *match, u64 reg_id, + int setFl, u64 *val_ptr) +{ +#ifdef CONFIG_VIDEO_ADV_DEBUG + struct v4l2_dbg_register req; + int stat = 0; + int okFl = 0; + + if (!capable(CAP_SYS_ADMIN)) return -EPERM; + + req.match = *match; + req.reg = reg_id; + if (setFl) req.val = *val_ptr; + /* It would be nice to know if a sub-device answered the request */ + v4l2_device_call_all(&hdw->v4l2_dev, 0, core, g_register, &req); + if (!setFl) *val_ptr = req.val; + if (okFl) { + return stat; + } + return -EINVAL; +#else + return -ENOSYS; +#endif +} + + +/* + Stuff for Emacs to see, in order to encourage consistent editing style: + *** Local Variables: *** + *** mode: c *** + *** fill-column: 75 *** + *** tab-width: 8 *** + *** c-basic-offset: 8 *** + *** End: *** + */ |