diff options
Diffstat (limited to 'drivers/media/usb/pvrusb2/pvrusb2-hdw.h')
| -rw-r--r-- | drivers/media/usb/pvrusb2/pvrusb2-hdw.h | 360 |
1 files changed, 360 insertions, 0 deletions
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h new file mode 100644 index 00000000000..8060fc666ee --- /dev/null +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h @@ -0,0 +1,360 @@ +/* + * + * + * Copyright (C) 2005 Mike Isely <isely@pobox.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __PVRUSB2_HDW_H +#define __PVRUSB2_HDW_H + +#include <linux/usb.h> +#include <linux/videodev2.h> +#include "pvrusb2-io.h" +#include "pvrusb2-ctrl.h" + + +/* Private internal control ids, look these up with + pvr2_hdw_get_ctrl_by_id() - these are NOT visible in V4L */ +#define PVR2_CID_STDCUR 2 +#define PVR2_CID_STDAVAIL 3 +#define PVR2_CID_INPUT 4 +#define PVR2_CID_AUDIOMODE 5 +#define PVR2_CID_FREQUENCY 6 +#define PVR2_CID_HRES 7 +#define PVR2_CID_VRES 8 +#define PVR2_CID_CROPL 9 +#define PVR2_CID_CROPT 10 +#define PVR2_CID_CROPW 11 +#define PVR2_CID_CROPH 12 +#define PVR2_CID_CROPCAPPAN 13 +#define PVR2_CID_CROPCAPPAD 14 +#define PVR2_CID_CROPCAPBL 15 +#define PVR2_CID_CROPCAPBT 16 +#define PVR2_CID_CROPCAPBW 17 +#define PVR2_CID_CROPCAPBH 18 +#define PVR2_CID_STDDETECT 19 + +/* Legal values for the INPUT state variable */ +#define PVR2_CVAL_INPUT_TV 0 +#define PVR2_CVAL_INPUT_DTV 1 +#define PVR2_CVAL_INPUT_COMPOSITE 2 +#define PVR2_CVAL_INPUT_SVIDEO 3 +#define PVR2_CVAL_INPUT_RADIO 4 + +enum pvr2_config { + pvr2_config_empty, /* No configuration */ + pvr2_config_mpeg, /* Encoded / compressed video */ + pvr2_config_vbi, /* Standard vbi info */ + pvr2_config_pcm, /* Audio raw pcm stream */ + pvr2_config_rawvideo, /* Video raw frames */ +}; + +enum pvr2_v4l_type { + pvr2_v4l_type_video, + pvr2_v4l_type_vbi, + pvr2_v4l_type_radio, +}; + +/* Major states that we can be in: + * + * DEAD - Device is in an unusable state and cannot be recovered. This + * can happen if we completely lose the ability to communicate with it + * (but it might still on the bus). In this state there's nothing we can + * do; it must be replugged in order to recover. + * + * COLD - Device is in an unusable state, needs microcontroller firmware. + * + * WARM - We can communicate with the device and the proper + * microcontroller firmware is running, but other device initialization is + * still needed (e.g. encoder firmware). + * + * ERROR - A problem prevents capture operation (e.g. encoder firmware + * missing). + * + * READY - Device is operational, but not streaming. + * + * RUN - Device is streaming. + * + */ +#define PVR2_STATE_NONE 0 +#define PVR2_STATE_DEAD 1 +#define PVR2_STATE_COLD 2 +#define PVR2_STATE_WARM 3 +#define PVR2_STATE_ERROR 4 +#define PVR2_STATE_READY 5 +#define PVR2_STATE_RUN 6 + +/* Translate configuration enum to a string label */ +const char *pvr2_config_get_name(enum pvr2_config); + +struct pvr2_hdw; + +/* Create and return a structure for interacting with the underlying + hardware */ +struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, + const struct usb_device_id *devid); + +/* Perform second stage initialization, passing in a notification callback + for when the master state changes. */ +int pvr2_hdw_initialize(struct pvr2_hdw *, + void (*callback_func)(void *), + void *callback_data); + +/* Destroy hardware interaction structure */ +void pvr2_hdw_destroy(struct pvr2_hdw *); + +/* Return true if in the ready (normal) state */ +int pvr2_hdw_dev_ok(struct pvr2_hdw *); + +/* Return small integer number [1..N] for logical instance number of this + device. This is useful for indexing array-valued module parameters. */ +int pvr2_hdw_get_unit_number(struct pvr2_hdw *); + +/* Get pointer to underlying USB device */ +struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *); + +/* Retrieve serial number of device */ +unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *); + +/* Retrieve bus location info of device */ +const char *pvr2_hdw_get_bus_info(struct pvr2_hdw *); + +/* Retrieve per-instance string identifier for this specific device */ +const char *pvr2_hdw_get_device_identifier(struct pvr2_hdw *); + +/* Called when hardware has been unplugged */ +void pvr2_hdw_disconnect(struct pvr2_hdw *); + +/* Get the number of defined controls */ +unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *); + +/* Retrieve a control handle given its index (0..count-1) */ +struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *,unsigned int); + +/* Retrieve a control handle given its internal ID (if any) */ +struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *,unsigned int); + +/* Retrieve a control handle given its V4L ID (if any) */ +struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *,unsigned int ctl_id); + +/* Retrieve a control handle given its immediate predecessor V4L ID (if any) */ +struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *, + unsigned int ctl_id); + +/* Commit all control changes made up to this point */ +int pvr2_hdw_commit_ctl(struct pvr2_hdw *); + +/* Return a bit mask of valid input selections for this device. Mask bits + * will be according to PVR_CVAL_INPUT_xxxx definitions. */ +unsigned int pvr2_hdw_get_input_available(struct pvr2_hdw *); + +/* Return a bit mask of allowed input selections for this device. Mask bits + * will be according to PVR_CVAL_INPUT_xxxx definitions. */ +unsigned int pvr2_hdw_get_input_allowed(struct pvr2_hdw *); + +/* Change the set of allowed input selections for this device. Both + change_mask and change_valu are mask bits according to + PVR_CVAL_INPUT_xxxx definitions. The change_mask parameter indicate + which settings are being changed and the change_val parameter indicates + whether corresponding settings are being set or cleared. */ +int pvr2_hdw_set_input_allowed(struct pvr2_hdw *, + unsigned int change_mask, + unsigned int change_val); + +/* Return name for this driver instance */ +const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *); + +/* Mark tuner status stale so that it will be re-fetched */ +void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *); + +/* Return information about the tuner */ +int pvr2_hdw_get_tuner_status(struct pvr2_hdw *,struct v4l2_tuner *); + +/* Return information about cropping capabilities */ +int pvr2_hdw_get_cropcap(struct pvr2_hdw *, struct v4l2_cropcap *); + +/* Query device and see if it thinks it is on a high-speed USB link */ +int pvr2_hdw_is_hsm(struct pvr2_hdw *); + +/* Return a string token representative of the hardware type */ +const char *pvr2_hdw_get_type(struct pvr2_hdw *); + +/* Return a single line description of the hardware type */ +const char *pvr2_hdw_get_desc(struct pvr2_hdw *); + +/* Turn streaming on/off */ +int pvr2_hdw_set_streaming(struct pvr2_hdw *,int); + +/* Find out if streaming is on */ +int pvr2_hdw_get_streaming(struct pvr2_hdw *); + +/* Retrieve driver overall state */ +int pvr2_hdw_get_state(struct pvr2_hdw *); + +/* Configure the type of stream to generate */ +int pvr2_hdw_set_stream_type(struct pvr2_hdw *, enum pvr2_config); + +/* Get handle to video output stream */ +struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *); + +/* Enable / disable retrieval of CPU firmware or prom contents. This must + be enabled before pvr2_hdw_cpufw_get() will function. Note that doing + this may prevent the device from running (and leaving this mode may + imply a device reset). */ +void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *, + int mode, /* 0=8KB FX2, 1=16KB FX2, 2=PROM */ + int enable_flag); + +/* Return true if we're in a mode for retrieval CPU firmware */ +int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *); + +/* Retrieve a piece of the CPU's firmware at the given offset. Return + value is the number of bytes retrieved or zero if we're past the end or + an error otherwise (e.g. if firmware retrieval is not enabled). */ +int pvr2_hdw_cpufw_get(struct pvr2_hdw *,unsigned int offs, + char *buf,unsigned int cnt); + +/* Retrieve a previously stored v4l minor device number */ +int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *,enum pvr2_v4l_type index); + +/* Store a v4l minor device number */ +void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *, + enum pvr2_v4l_type index,int); + +/* Direct read/write access to chip's registers: + match - specify criteria to identify target chip (this is a v4l dbg struct) + reg_id - register number to access + setFl - true to set the register, false to read it + val_ptr - storage location for source / result. */ +int pvr2_hdw_register_access(struct pvr2_hdw *, + struct v4l2_dbg_match *match, u64 reg_id, + int setFl, u64 *val_ptr); + +/* The following entry points are all lower level things you normally don't + want to worry about. */ + +/* Issue a command and get a response from the device. LOTS of higher + level stuff is built on this. */ +int pvr2_send_request(struct pvr2_hdw *, + void *write_ptr,unsigned int write_len, + void *read_ptr,unsigned int read_len); + +/* Slightly higher level device communication functions. */ +int pvr2_write_register(struct pvr2_hdw *, u16, u32); + +/* Call if for any reason we can't talk to the hardware anymore - this will + cause the driver to stop flailing on the device. */ +void pvr2_hdw_render_useless(struct pvr2_hdw *); + +/* Set / clear 8051's reset bit */ +void pvr2_hdw_cpureset_assert(struct pvr2_hdw *,int); + +/* Execute a USB-commanded device reset */ +void pvr2_hdw_device_reset(struct pvr2_hdw *); + +/* Reset worker's error trapping circuit breaker */ +int pvr2_hdw_untrip(struct pvr2_hdw *); + +/* Execute hard reset command (after this point it's likely that the + encoder will have to be reconfigured). This also clears the "useless" + state. */ +int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *); + +/* Execute simple reset command */ +int pvr2_hdw_cmd_powerup(struct pvr2_hdw *); + +/* suspend */ +int pvr2_hdw_cmd_powerdown(struct pvr2_hdw *); + +/* Order decoder to reset */ +int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *); + +/* Direct manipulation of GPIO bits */ +int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *); +int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *); +int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *); +int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val); +int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val); + +/* This data structure is specifically for the next function... */ +struct pvr2_hdw_debug_info { + int big_lock_held; + int ctl_lock_held; + int flag_disconnected; + int flag_init_ok; + int flag_ok; + int fw1_state; + int flag_decoder_missed; + int flag_tripped; + int state_encoder_ok; + int state_encoder_run; + int state_decoder_run; + int state_decoder_ready; + int state_usbstream_run; + int state_decoder_quiescent; + int state_pipeline_config; + int state_pipeline_req; + int state_pipeline_pause; + int state_pipeline_idle; + int cmd_debug_state; + int cmd_debug_write_len; + int cmd_debug_read_len; + int cmd_debug_write_pend; + int cmd_debug_read_pend; + int cmd_debug_timeout; + int cmd_debug_rstatus; + int cmd_debug_wstatus; + unsigned char cmd_code; +}; + +/* Non-intrusively retrieve internal state info - this is useful for + diagnosing lockups. Note that this operation is completed without any + kind of locking and so it is not atomic and may yield inconsistent + results. This is *purely* a debugging aid. */ +void pvr2_hdw_get_debug_info_unlocked(const struct pvr2_hdw *hdw, + struct pvr2_hdw_debug_info *); + +/* Intrusively retrieve internal state info - this is useful for + diagnosing overall driver state. This operation synchronizes against + the overall driver mutex - so if there are locking problems this will + likely hang! This is *purely* a debugging aid. */ +void pvr2_hdw_get_debug_info_locked(struct pvr2_hdw *hdw, + struct pvr2_hdw_debug_info *); + +/* Report out several lines of text that describes driver internal state. + Results are written into the passed-in buffer. */ +unsigned int pvr2_hdw_state_report(struct pvr2_hdw *hdw, + char *buf_ptr,unsigned int buf_size); + +/* Cause modules to log their state once */ +void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw); + +/* Cause encoder firmware to be uploaded into the device. This is normally + done autonomously, but the interface is exported here because it is also + a debugging aid. */ +int pvr2_upload_firmware2(struct pvr2_hdw *hdw); + +#endif /* __PVRUSB2_HDW_H */ + +/* + Stuff for Emacs to see, in order to encourage consistent editing style: + *** Local Variables: *** + *** mode: c *** + *** fill-column: 75 *** + *** tab-width: 8 *** + *** c-basic-offset: 8 *** + *** End: *** + */ |