diff options
Diffstat (limited to 'drivers/media/usb/stk1160/stk1160-reg.h')
| -rw-r--r-- | drivers/media/usb/stk1160/stk1160-reg.h | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/drivers/media/usb/stk1160/stk1160-reg.h b/drivers/media/usb/stk1160/stk1160-reg.h new file mode 100644 index 00000000000..3e49da6e7ed --- /dev/null +++ b/drivers/media/usb/stk1160/stk1160-reg.h @@ -0,0 +1,93 @@ +/* + * STK1160 driver + * + * Copyright (C) 2012 Ezequiel Garcia + * <elezegarcia--a.t--gmail.com> + * + * Based on Easycap driver by R.M. Thomas + * Copyright (C) 2010 R.M. Thomas + * <rmthomas--a.t--sciolus.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +/* GPIO Control */ +#define STK1160_GCTRL 0x000 + +/* Remote Wakup Control */ +#define STK1160_RMCTL 0x00c + +/* + * Decoder Control Register: + * This byte controls capture start/stop + * with bit #7 (0x?? OR 0x80 to activate). + */ +#define STK1160_DCTRL 0x100 + +/* Capture Frame Start Position */ +#define STK116_CFSPO 0x110 +#define STK116_CFSPO_STX_L 0x110 +#define STK116_CFSPO_STX_H 0x111 +#define STK116_CFSPO_STY_L 0x112 +#define STK116_CFSPO_STY_H 0x113 + +/* Capture Frame End Position */ +#define STK116_CFEPO 0x114 +#define STK116_CFEPO_ENX_L 0x114 +#define STK116_CFEPO_ENX_H 0x115 +#define STK116_CFEPO_ENY_L 0x116 +#define STK116_CFEPO_ENY_H 0x117 + +/* Serial Interface Control */ +#define STK1160_SICTL 0x200 +#define STK1160_SICTL_CD 0x202 +#define STK1160_SICTL_SDA 0x203 + +/* Serial Bus Write */ +#define STK1160_SBUSW 0x204 +#define STK1160_SBUSW_WA 0x204 +#define STK1160_SBUSW_WD 0x205 + +/* Serial Bus Read */ +#define STK1160_SBUSR 0x208 +#define STK1160_SBUSR_RA 0x208 +#define STK1160_SBUSR_RD 0x209 + +/* Alternate Serial Inteface Control */ +#define STK1160_ASIC 0x2fc + +/* PLL Select Options */ +#define STK1160_PLLSO 0x018 + +/* PLL Frequency Divider */ +#define STK1160_PLLFD 0x01c + +/* Timing Generator */ +#define STK1160_TIGEN 0x300 + +/* Timing Control Parameter */ +#define STK1160_TICTL 0x350 + +/* AC97 Audio Control */ +#define STK1160_AC97CTL_0 0x500 +#define STK1160_AC97CTL_1 0x504 + +/* Use [0:6] bits of register 0x504 to set codec command address */ +#define STK1160_AC97_ADDR 0x504 +/* Use [16:31] bits of register 0x500 to set codec command data */ +#define STK1160_AC97_CMD 0x502 + +/* Audio I2S Interface */ +#define STK1160_I2SCTL 0x50c + +/* EEPROM Interface */ +#define STK1160_EEPROM_SZ 0x5f0 |