diff options
Diffstat (limited to 'drivers/media/video/Kconfig')
| -rw-r--r-- | drivers/media/video/Kconfig | 244 |
1 files changed, 77 insertions, 167 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index f8fc8654693..2e15903b976 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -45,6 +45,10 @@ config VIDEO_TUNER tristate depends on MEDIA_TUNER +config V4L2_MEM2MEM_DEV + tristate + depends on VIDEOBUF_GEN + # # Multimedia Video device configuration # @@ -361,7 +365,7 @@ config VIDEO_SAA717X config VIDEO_SAA7191 tristate "Philips SAA7191 video decoder" - depends on VIDEO_V4L1 && I2C + depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7191 video decoder. @@ -480,6 +484,12 @@ config VIDEO_ADV7343 To compile this driver as a module, choose M here: the module will be called adv7343. +config VIDEO_AK881X + tristate "AK8813/AK8814 video encoders" + depends on I2C + help + Video output driver for AKM AK8813 and AK8814 TV encoders + comment "Video improvement chips" config VIDEO_UPD64031A @@ -507,42 +517,30 @@ config VIDEO_UPD64083 endmenu # encoder / decoder chips -config DISPLAY_DAVINCI_DM646X_EVM - tristate "DM646x EVM Video Display" - depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM +config VIDEO_SH_VOU + tristate "SuperH VOU video output driver" + depends on VIDEO_DEV && ARCH_SHMOBILE select VIDEOBUF_DMA_CONTIG - select VIDEO_DAVINCI_VPIF - select VIDEO_ADV7343 - select VIDEO_THS7303 help - Support for DM6467 based display device. - - To compile this driver as a module, choose M here: the - module will be called vpif_display. + Support for the Video Output Unit (VOU) on SuperH SoCs. -config CAPTURE_DAVINCI_DM646X_EVM - tristate "DM646x EVM Video Capture" - depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM +config VIDEO_VIU + tristate "Freescale VIU Video Driver" + depends on VIDEO_V4L2 && PPC_MPC512x select VIDEOBUF_DMA_CONTIG - select VIDEO_DAVINCI_VPIF - help - Support for DM6467 based capture device. - - To compile this driver as a module, choose M here: the - module will be called vpif_capture. - -config VIDEO_DAVINCI_VPIF - tristate "DaVinci VPIF Driver" - depends on DISPLAY_DAVINCI_DM646X_EVM - help - Support for DaVinci VPIF Driver. + default y + ---help--- + Support for Freescale VIU video driver. This device captures + video data, or overlays video on DIU frame buffer. - To compile this driver as a module, choose M here: the - module will be called vpif. + Say Y here if you want to enable VIU device on MPC5121e Rev2+. + In doubt, say N. config VIDEO_VIVI tristate "Virtual Video Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 + depends on (FRAMEBUFFER_CONSOLE || STI_CONSOLE) && FONTS + select FONT_8x16 select VIDEOBUF_VMALLOC default n ---help--- @@ -552,66 +550,9 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. -config VIDEO_VPSS_SYSTEM - tristate "VPSS System module driver" - depends on ARCH_DAVINCI - help - Support for vpss system module for video driver - -config VIDEO_VPFE_CAPTURE - tristate "VPFE Video Capture Driver" - depends on VIDEO_V4L2 && ARCH_DAVINCI - select VIDEOBUF_DMA_CONTIG - help - Support for DMXXXX VPFE based frame grabber. This is the - common V4L2 module for following DMXXX SoCs from Texas - Instruments:- DM6446 & DM355. - - To compile this driver as a module, choose M here: the - module will be called vpfe-capture. - -config VIDEO_DM6446_CCDC - tristate "DM6446 CCDC HW module" - depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from slave decoders. - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_DM355_CCDC - tristate "DM355 CCDC HW module" - depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DM355 CCD hw module. DM355 CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from a slave decoders - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_ISIF - tristate "ISIF HW module" - depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables ISIF hw module. This is the hardware module for - configuring ISIF in VPFE to capture Raw Bayer RGB data from - a image sensor or YUV data from a YUV source. +source "drivers/media/video/davinci/Kconfig" - To compile this driver as a module, choose M here: the - module will be called vpfe. +source "drivers/media/video/omap/Kconfig" source "drivers/media/video/bt8xx/Kconfig" @@ -626,7 +567,7 @@ config VIDEO_PMS config VIDEO_BWQCAM tristate "Quickcam BW Video For Linux" - depends on PARPORT && VIDEO_V4L1 + depends on PARPORT && VIDEO_V4L2 help Say Y have if you the black and white version of the QuickCam camera. See the next option for the color version. @@ -636,7 +577,7 @@ config VIDEO_BWQCAM config VIDEO_CQCAM tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)" - depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1 + depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2 help This is the video4linux driver for the colour version of the Connectix QuickCam. If you have one of these cameras, say Y here, @@ -647,7 +588,7 @@ config VIDEO_CQCAM config VIDEO_W9966 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" - depends on PARPORT_1284 && PARPORT && VIDEO_V4L1 + depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 help Video4linux driver for Winbond's w9966 based Webcams. Currently tested with the LifeView FlyCam Supra. @@ -740,7 +681,7 @@ source "drivers/media/video/zoran/Kconfig" config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" - depends on PCI && SONY_LAPTOP && VIDEO_V4L1 + depends on PCI && SONY_LAPTOP && VIDEO_V4L2 ---help--- This is the video4linux driver for the Motion Eye camera found in the Vaio Picturebook laptops. Please read the material in @@ -756,7 +697,7 @@ source "drivers/media/video/saa7134/Kconfig" config VIDEO_MXB tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" - depends on PCI && VIDEO_V4L1 && I2C + depends on PCI && VIDEO_V4L2 && I2C select VIDEO_SAA7146_VV select VIDEO_TUNER select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO @@ -807,7 +748,7 @@ source "drivers/media/video/saa7164/Kconfig" config VIDEO_M32R_AR tristate "AR devices" - depends on M32R && VIDEO_V4L1 + depends on M32R && VIDEO_V4L2 ---help--- This is a video4linux driver for the Renesas AR (Artificial Retina) camera module. @@ -935,6 +876,12 @@ config VIDEO_PXA27x ---help--- This is a v4l2 driver for the PXA27x Quick Capture Interface +config VIDEO_SH_MOBILE_CSI2 + tristate "SuperH Mobile MIPI CSI-2 Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK + ---help--- + This is a v4l2 driver for the SuperH MIPI CSI-2 Interface + config VIDEO_SH_MOBILE_CEU tristate "SuperH Mobile CEU Interface driver" depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK @@ -949,6 +896,19 @@ config VIDEO_OMAP2 ---help--- This is a v4l2 driver for the TI OMAP2 camera capture interface +config VIDEO_MX2_HOSTSUPPORT + bool + +config VIDEO_MX2 + tristate "i.MX27/i.MX25 Camera Sensor Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25) + select VIDEOBUF_DMA_CONTIG + select VIDEO_MX2_HOSTSUPPORT + ---help--- + This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor + Interface + + # # USB Multimedia device configuration # @@ -980,61 +940,6 @@ source "drivers/media/video/usbvideo/Kconfig" source "drivers/media/video/et61x251/Kconfig" -config VIDEO_OVCAMCHIP - tristate "OmniVision Camera Chip support (DEPRECATED)" - depends on I2C && VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca ov519 module - instead. Note that for the ov511 / ov518 support of the gspca module - you need atleast version 0.6.0 of libv4l and for the w9968cf - atleast version 0.6.3 of libv4l. - - Support for the OmniVision OV6xxx and OV7xxx series of camera chips. - This driver is intended to be used with the ov511 and w9968cf USB - camera drivers. - - To compile this driver as a module, choose M here: the - module will be called ovcamchip. - -config USB_W9968CF - tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)" - depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP - default n - ---help--- - This driver is DEPRECATED please use the gspca ov519 module - instead. Note that for the w9968cf support of the gspca module - you need atleast version 0.6.3 of libv4l. - - Say Y here if you want support for cameras based on OV681 or - Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. - - This driver has an optional plugin, which is distributed as a - separate module only (released under GPL). It allows to use higher - resolutions and framerates, but cannot be included in the official - Linux kernel for performance purposes. - - See <file:Documentation/video4linux/w9968cf.txt> for more info. - - To compile this driver as a module, choose M here: the - module will be called w9968cf. - -config USB_OV511 - tristate "USB OV511 Camera support (DEPRECATED)" - depends on VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca ov519 module - instead. Note that for the ov511 / ov518 support of the gspca module - you need atleast version 0.6.0 of libv4l. - - Say Y here if you want to connect this type of camera to your - computer's USB port. See <file:Documentation/video4linux/ov511.txt> - for more information and for a list of supported cameras. - - To compile this driver as a module, choose M here: the - module will be called ov511. - config USB_SE401 tristate "USB SE401 Camera support" depends on VIDEO_V4L1 @@ -1048,25 +953,6 @@ config USB_SE401 source "drivers/media/video/sn9c102/Kconfig" -config USB_STV680 - tristate "USB STV680 (Pencam) Camera support (DEPRECATED)" - depends on VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca stv0680 module - instead. Note that for the gspca stv0680 module you need - atleast version 0.6.3 of libv4l. - - Say Y here if you want to connect this type of camera to your - computer's USB port. This includes the Pencam line of cameras. - See <file:Documentation/video4linux/stv680.txt> for more information - and for a list of supported cameras. - - To compile this driver as a module, choose M here: the - module will be called stv680. - -source "drivers/media/video/zc0301/Kconfig" - source "drivers/media/video/pwc/Kconfig" config USB_ZR364XX @@ -1107,3 +993,27 @@ config USB_S2255 endif # V4L_USB_DRIVERS endif # VIDEO_CAPTURE_DRIVERS + +menuconfig V4L_MEM2MEM_DRIVERS + bool "Memory-to-memory multimedia devices" + depends on VIDEO_V4L2 + default n + ---help--- + Say Y here to enable selecting drivers for V4L devices that + use system memory for both source and destination buffers, as opposed + to capture and output drivers, which use memory buffers for just + one of those. + +if V4L_MEM2MEM_DRIVERS + +config VIDEO_MEM2MEM_TESTDEV + tristate "Virtual test device for mem2mem framework" + depends on VIDEO_DEV && VIDEO_V4L2 + select VIDEOBUF_VMALLOC + select V4L2_MEM2MEM_DEV + default n + ---help--- + This is a virtual test device for the memory-to-memory driver + framework. + +endif # V4L_MEM2MEM_DRIVERS |