diff options
Diffstat (limited to 'drivers/media/video/Kconfig')
| -rw-r--r-- | drivers/media/video/Kconfig | 297 |
1 files changed, 0 insertions, 297 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig deleted file mode 100644 index 28b25bf3580..00000000000 --- a/drivers/media/video/Kconfig +++ /dev/null @@ -1,297 +0,0 @@ -if MEDIA_CAMERA_SUPPORT - -config VIDEO_VIVI - tristate "Virtual Video Driver" - depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 - depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE - select FONT_8x16 - select VIDEOBUF2_VMALLOC - default n - ---help--- - Enables a virtual video driver. This device shows a color bar - and a timestamp, as a real device would generate by using V4L2 - api. - Say Y here if you want to test video apps or debug V4L devices. - In doubt, say N. - -# -# Platform drivers -# All drivers here are currently for webcam support - -menuconfig V4L_PLATFORM_DRIVERS - bool "V4L platform devices" - depends on MEDIA_CAMERA_SUPPORT - default n - ---help--- - Say Y here to enable support for platform-specific V4L drivers. - -if V4L_PLATFORM_DRIVERS - -source "drivers/media/video/marvell-ccic/Kconfig" - -config VIDEO_VIA_CAMERA - tristate "VIAFB camera controller support" - depends on FB_VIA - select VIDEOBUF_DMA_SG - select VIDEO_OV7670 - help - Driver support for the integrated camera controller in VIA - Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems - with ov7670 sensors. - -# -# Platform multimedia device configuration -# - -source "drivers/media/video/davinci/Kconfig" - -source "drivers/media/video/omap/Kconfig" - -source "drivers/media/video/blackfin/Kconfig" - -config VIDEO_SH_VOU - tristate "SuperH VOU video output driver" - depends on VIDEO_DEV && ARCH_SHMOBILE - select VIDEOBUF_DMA_CONTIG - help - Support for the Video Output Unit (VOU) on SuperH SoCs. - -config VIDEO_VIU - tristate "Freescale VIU Video Driver" - depends on VIDEO_V4L2 && PPC_MPC512x - select VIDEOBUF_DMA_CONTIG - default y - ---help--- - Support for Freescale VIU video driver. This device captures - video data, or overlays video on DIU frame buffer. - - Say Y here if you want to enable VIU device on MPC5121e Rev2+. - In doubt, say N. - -config VIDEO_TIMBERDALE - tristate "Support for timberdale Video In/LogiWIN" - depends on VIDEO_V4L2 && I2C && DMADEVICES - select DMA_ENGINE - select TIMB_DMA - select VIDEO_ADV7180 - select VIDEOBUF_DMA_CONTIG - ---help--- - Add support for the Video In peripherial of the timberdale FPGA. - -config VIDEO_VINO - tristate "SGI Vino Video For Linux" - depends on I2C && SGI_IP22 && VIDEO_V4L2 - select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO - help - Say Y here to build in support for the Vino video input system found - on SGI Indy machines. - -config VIDEO_M32R_AR - tristate "AR devices" - depends on M32R && VIDEO_V4L2 - ---help--- - This is a video4linux driver for the Renesas AR (Artificial Retina) - camera module. - -config VIDEO_M32R_AR_M64278 - tristate "AR device with color module M64278(VGA)" - depends on PLAT_M32700UT - select VIDEO_M32R_AR - ---help--- - This is a video4linux driver for the Renesas AR (Artificial - Retina) with M64278E-800 camera module. - This module supports VGA(640x480 pixels) resolutions. - - To compile this driver as a module, choose M here: the - module will be called arv. - -config VIDEO_OMAP3 - tristate "OMAP 3 Camera support (EXPERIMENTAL)" - depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL - ---help--- - Driver for an OMAP 3 camera controller. - -config VIDEO_OMAP3_DEBUG - bool "OMAP 3 Camera debug messages" - depends on VIDEO_OMAP3 - ---help--- - Enable debug messages on OMAP 3 camera controller driver. - -config SOC_CAMERA - tristate "SoC camera support" - depends on VIDEO_V4L2 && HAS_DMA && I2C - select VIDEOBUF_GEN - select VIDEOBUF2_CORE - help - SoC Camera is a common API to several cameras, not connecting - over a bus like PCI or USB. For example some i2c camera connected - directly to the data bus of an SoC. - - -config SOC_CAMERA_PLATFORM - tristate "platform camera support" - depends on SOC_CAMERA - help - This is a generic SoC camera platform driver, useful for testing - -config MX1_VIDEO - bool - -config VIDEO_MX1 - tristate "i.MX1/i.MXL CMOS Sensor Interface driver" - depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA - select FIQ - select VIDEOBUF_DMA_CONTIG - select MX1_VIDEO - ---help--- - This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface - -config MX3_VIDEO - bool - -config VIDEO_MX3 - tristate "i.MX3x Camera Sensor Interface driver" - depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA - select VIDEOBUF2_DMA_CONTIG - select MX3_VIDEO - ---help--- - This is a v4l2 driver for the i.MX3x Camera Sensor Interface - -config VIDEO_PXA27x - tristate "PXA27x Quick Capture Interface driver" - depends on VIDEO_DEV && PXA27x && SOC_CAMERA - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the PXA27x Quick Capture Interface - -config VIDEO_SH_MOBILE_CSI2 - tristate "SuperH Mobile MIPI CSI-2 Interface driver" - depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK - ---help--- - This is a v4l2 driver for the SuperH MIPI CSI-2 Interface - -config VIDEO_SH_MOBILE_CEU - tristate "SuperH Mobile CEU Interface driver" - depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK - select VIDEOBUF2_DMA_CONTIG - ---help--- - This is a v4l2 driver for the SuperH Mobile CEU Interface - -config VIDEO_OMAP1 - tristate "OMAP1 Camera Interface driver" - depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA - select VIDEOBUF_DMA_CONTIG - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the TI OMAP1 camera interface - -config VIDEO_OMAP2 - tristate "OMAP2 Camera Capture Interface driver" - depends on VIDEO_DEV && ARCH_OMAP2 - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the TI OMAP2 camera capture interface - -config VIDEO_MX2_HOSTSUPPORT - bool - -config VIDEO_MX2 - tristate "i.MX27/i.MX25 Camera Sensor Interface driver" - depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN)) - select VIDEOBUF2_DMA_CONTIG - select VIDEO_MX2_HOSTSUPPORT - ---help--- - This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor - Interface - -config VIDEO_ATMEL_ISI - tristate "ATMEL Image Sensor Interface (ISI) support" - depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91 - select VIDEOBUF2_DMA_CONTIG - ---help--- - This module makes the ATMEL Image Sensor Interface available - as a v4l2 device. - -source "drivers/media/video/s5p-fimc/Kconfig" -source "drivers/media/video/s5p-tv/Kconfig" - -endif # V4L_PLATFORM_DRIVERS - -menuconfig V4L_MEM2MEM_DRIVERS - bool "Memory-to-memory multimedia devices" - depends on VIDEO_V4L2 - default n - ---help--- - Say Y here to enable selecting drivers for V4L devices that - use system memory for both source and destination buffers, as opposed - to capture and output drivers, which use memory buffers for just - one of those. - -if V4L_MEM2MEM_DRIVERS - -config VIDEO_MEM2MEM_TESTDEV - tristate "Virtual test device for mem2mem framework" - depends on VIDEO_DEV && VIDEO_V4L2 - select VIDEOBUF2_VMALLOC - select V4L2_MEM2MEM_DEV - default n - ---help--- - This is a virtual test device for the memory-to-memory driver - framework. - -config VIDEO_CODA - tristate "Chips&Media Coda multi-standard codec IP" - depends on VIDEO_DEV && VIDEO_V4L2 - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - ---help--- - Coda is a range of video codec IPs that supports - H.264, MPEG-4, and other video formats. - -config VIDEO_MEM2MEM_DEINTERLACE - tristate "Deinterlace support" - depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - help - Generic deinterlacing V4L2 driver. - -config VIDEO_SAMSUNG_S5P_G2D - tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - default n - ---help--- - This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D - 2d graphics accelerator. - -config VIDEO_SAMSUNG_S5P_JPEG - tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - ---help--- - This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec - -config VIDEO_SAMSUNG_S5P_MFC - tristate "Samsung S5P MFC 5.1 Video Codec" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P - select VIDEOBUF2_DMA_CONTIG - default n - help - MFC 5.1 driver for V4L2. - -config VIDEO_MX2_EMMAPRP - tristate "MX2 eMMa-PrP support" - depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27 - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - help - MX2X chips have a PrP that can be used to process buffers from - memory to memory. Operations include resizing and format - conversion. - -endif # V4L_MEM2MEM_DRIVERS - -endif # MEDIA_CAMERA_SUPPORT |