diff options
Diffstat (limited to 'drivers/media/video/Kconfig')
| -rw-r--r-- | drivers/media/video/Kconfig | 85 |
1 files changed, 65 insertions, 20 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 99937c94d7d..c128fac0ce2 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -5,7 +5,7 @@ config VIDEO_V4L2 tristate depends on VIDEO_DEV && VIDEO_V4L2_COMMON - default VIDEO_DEV && VIDEO_V4L2_COMMON + default y config VIDEOBUF_GEN tristate @@ -73,6 +73,7 @@ config VIDEOBUF2_DMA_SG menuconfig VIDEO_CAPTURE_DRIVERS bool "Video capture adapters" depends on VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT default y ---help--- Say Y here to enable selecting the video adapters for @@ -461,6 +462,15 @@ config VIDEO_ADV7343 To compile this driver as a module, choose M here: the module will be called adv7343. +config VIDEO_ADV7393 + tristate "ADV7393 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7393 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7393. + config VIDEO_AK881X tristate "AK8813/AK8814 video encoders" depends on I2C @@ -478,6 +488,7 @@ config VIDEO_SMIAPP_PLL config VIDEO_OV7670 tristate "OmniVision OV7670 sensor support" depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT ---help--- This is a Video4Linux2 sensor-level driver for the OmniVision OV7670 VGA camera. It currently only works with the M88ALP01 @@ -486,6 +497,7 @@ config VIDEO_OV7670 config VIDEO_VS6624 tristate "ST VS6624 sensor support" depends on VIDEO_V4L2 && I2C + depends on MEDIA_CAMERA_SUPPORT ---help--- This is a Video4Linux2 sensor-level driver for the ST VS6624 camera. @@ -496,6 +508,7 @@ config VIDEO_VS6624 config VIDEO_MT9M032 tristate "MT9M032 camera sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT select VIDEO_APTINA_PLL ---help--- This driver supports MT9M032 camera sensors from Aptina, monochrome @@ -504,6 +517,7 @@ config VIDEO_MT9M032 config VIDEO_MT9P031 tristate "Aptina MT9P031 support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT select VIDEO_APTINA_PLL ---help--- This is a Video4Linux2 sensor-level driver for the Aptina @@ -512,6 +526,7 @@ config VIDEO_MT9P031 config VIDEO_MT9T001 tristate "Aptina MT9T001 support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT ---help--- This is a Video4Linux2 sensor-level driver for the Aptina (Micron) mt0t001 3 Mpixel camera. @@ -519,6 +534,7 @@ config VIDEO_MT9T001 config VIDEO_MT9V011 tristate "Micron mt9v011 sensor support" depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT ---help--- This is a Video4Linux2 sensor-level driver for the Micron mt0v011 1.3 Mpixel camera. It currently only works with the @@ -527,6 +543,7 @@ config VIDEO_MT9V011 config VIDEO_MT9V032 tristate "Micron MT9V032 sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT ---help--- This is a Video4Linux2 sensor-level driver for the Micron MT9V032 752x480 CMOS sensor. @@ -534,6 +551,7 @@ config VIDEO_MT9V032 config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT ---help--- This is a driver for the Toshiba TCM825x VGA camera sensor. It is used for example in Nokia N800. @@ -541,12 +559,14 @@ config VIDEO_TCM825X config VIDEO_SR030PC30 tristate "Siliconfile SR030PC30 sensor support" depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT ---help--- This driver supports SR030PC30 VGA camera from Siliconfile config VIDEO_NOON010PC30 tristate "Siliconfile NOON010PC30 sensor support" depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT ---help--- This driver supports NOON010PC30 CIF camera from Siliconfile @@ -554,6 +574,7 @@ source "drivers/media/video/m5mols/Kconfig" config VIDEO_S5K6AA tristate "Samsung S5K6AAFX sensor support" + depends on MEDIA_CAMERA_SUPPORT depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API ---help--- This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M @@ -566,6 +587,7 @@ comment "Flash devices" config VIDEO_ADP1653 tristate "ADP1653 flash support" depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT ---help--- This is a driver for the ADP1653 flash controller. It is used for example in Nokia N900. @@ -573,6 +595,7 @@ config VIDEO_ADP1653 config VIDEO_AS3645A tristate "AS3645A flash driver support" depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT ---help--- This is a driver for the AS3645A and LM3555 flash controllers. It has build in control for flash, torch and indicator LEDs. @@ -647,30 +670,14 @@ menuconfig V4L_USB_DRIVERS depends on USB default y -if V4L_USB_DRIVERS +if V4L_USB_DRIVERS && MEDIA_CAMERA_SUPPORT -source "drivers/media/video/au0828/Kconfig" + comment "Webcam devices" source "drivers/media/video/uvc/Kconfig" source "drivers/media/video/gspca/Kconfig" -source "drivers/media/video/pvrusb2/Kconfig" - -source "drivers/media/video/hdpvr/Kconfig" - -source "drivers/media/video/em28xx/Kconfig" - -source "drivers/media/video/tlg2300/Kconfig" - -source "drivers/media/video/cx231xx/Kconfig" - -source "drivers/media/video/tm6000/Kconfig" - -source "drivers/media/video/usbvision/Kconfig" - -source "drivers/media/video/sn9c102/Kconfig" - source "drivers/media/video/pwc/Kconfig" source "drivers/media/video/cpia2/Kconfig" @@ -711,15 +718,46 @@ config USB_S2255 Say Y here if you want support for the Sensoray 2255 USB device. This driver can be compiled as a module, called s2255drv. +source "drivers/media/video/sn9c102/Kconfig" + +endif # V4L_USB_DRIVERS && MEDIA_CAMERA_SUPPORT + +if V4L_USB_DRIVERS + + comment "Webcam and/or TV USB devices" + +source "drivers/media/video/em28xx/Kconfig" + +endif + +if V4L_USB_DRIVERS && MEDIA_ANALOG_TV_SUPPORT + + comment "TV USB devices" + +source "drivers/media/video/au0828/Kconfig" + +source "drivers/media/video/pvrusb2/Kconfig" + +source "drivers/media/video/hdpvr/Kconfig" + +source "drivers/media/video/tlg2300/Kconfig" + +source "drivers/media/video/cx231xx/Kconfig" + +source "drivers/media/video/tm6000/Kconfig" + +source "drivers/media/video/usbvision/Kconfig" + endif # V4L_USB_DRIVERS # -# PCI drivers configuration +# PCI drivers configuration - No devices here are for webcams # menuconfig V4L_PCI_DRIVERS bool "V4L PCI(e) devices" depends on PCI + depends on MEDIA_ANALOG_TV_SUPPORT default y ---help--- Say Y here to enable support for these PCI(e) drivers. @@ -814,11 +852,13 @@ endif # V4L_PCI_DRIVERS # # ISA & parallel port drivers configuration +# All devices here are webcam or grabber devices # menuconfig V4L_ISA_PARPORT_DRIVERS bool "V4L ISA and parallel port devices" depends on ISA || PARPORT + depends on MEDIA_CAMERA_SUPPORT default n ---help--- Say Y here to enable support for these ISA and parallel port drivers. @@ -871,8 +911,13 @@ config VIDEO_W9966 endif # V4L_ISA_PARPORT_DRIVERS +# +# Platform drivers +# All drivers here are currently for webcam support + menuconfig V4L_PLATFORM_DRIVERS bool "V4L platform devices" + depends on MEDIA_CAMERA_SUPPORT default n ---help--- Say Y here to enable support for platform-specific V4L drivers. |