diff options
Diffstat (limited to 'drivers/media/video/bt8xx/bttv-cards.c')
| -rw-r--r-- | drivers/media/video/bt8xx/bttv-cards.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 7f58756d72c..3c9e6c7e7b5 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -2244,8 +2244,8 @@ struct tvcard bttv_tvcards[] = { }, [BTTV_BOARD_PICOLO_TETRA_CHIP] = { /*Eric DEBIEF <debief@telemsa.com>*/ - /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/ - /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ + /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ + /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ /*0x79 in bttv.h*/ .name = "Euresys Picolo Tetra", .video_inputs = 4, @@ -3616,7 +3616,7 @@ void __devinit bttv_init_tuner(struct bttv *btv) &btv->c.i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); - tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; + tun_setup.mode_mask = T_ANALOG_TV; tun_setup.type = btv->tuner_type; tun_setup.addr = addr; @@ -4567,7 +4567,7 @@ static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) * at one input while the monitor is looking at another. * * Since I've couldn't be bothered figuring out how to add an - * independant muxsel for the monitor bus, I've just set it to + * independent muxsel for the monitor bus, I've just set it to * whatever the card is looking at. * * OUT0 of the TDA8540's is connected to MUX0 (0x03) |