diff options
Diffstat (limited to 'drivers/media/video/cafe_ccic.c')
| -rw-r--r-- | drivers/media/video/cafe_ccic.c | 35 |
1 files changed, 32 insertions, 3 deletions
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index c08f650df42..ef5361824f8 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -356,6 +356,7 @@ static int cafe_smbus_write_data(struct cafe_camera *cam, { unsigned int rval; unsigned long flags; + DEFINE_WAIT(the_wait); spin_lock_irqsave(&cam->dev_lock, flags); rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); @@ -369,10 +370,29 @@ static int cafe_smbus_write_data(struct cafe_camera *cam, rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); cafe_reg_write(cam, REG_TWSIC1, rval); spin_unlock_irqrestore(&cam->dev_lock, flags); - msleep(2); /* Required or things flake */ + /* + * Time to wait for the write to complete. THIS IS A RACY + * WAY TO DO IT, but the sad fact is that reading the TWSIC1 + * register too quickly after starting the operation sends + * the device into a place that may be kinder and better, but + * which is absolutely useless for controlling the sensor. In + * practice we have plenty of time to get into our sleep state + * before the interrupt hits, and the worst case is that we + * time out and then see that things completed, so this seems + * the best way for now. + */ + do { + prepare_to_wait(&cam->smbus_wait, &the_wait, + TASK_UNINTERRUPTIBLE); + schedule_timeout(1); /* even 1 jiffy is too long */ + finish_wait(&cam->smbus_wait, &the_wait); + } while (!cafe_smbus_write_done(cam)); + +#ifdef IF_THE_CAFE_HARDWARE_WORKED_RIGHT wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(cam), CAFE_SMBUS_TIMEOUT); +#endif spin_lock_irqsave(&cam->dev_lock, flags); rval = cafe_reg_read(cam, REG_TWSIC1); spin_unlock_irqrestore(&cam->dev_lock, flags); @@ -710,7 +730,7 @@ static void cafe_ctlr_init(struct cafe_camera *cam) * Here we must wait a bit for the controller to come around. */ spin_unlock_irqrestore(&cam->dev_lock, flags); - mdelay(5); /* FIXME revisit this */ + msleep(5); spin_lock_irqsave(&cam->dev_lock, flags); cafe_reg_write(cam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC); @@ -2233,12 +2253,21 @@ static int cafe_pci_resume(struct pci_dev *pdev) if (ret) return ret; ret = pci_enable_device(pdev); + if (ret) { cam_warn(cam, "Unable to re-enable device on resume!\n"); return ret; } cafe_ctlr_init(cam); - cafe_ctlr_power_up(cam); + cafe_ctlr_power_down(cam); + + mutex_lock(&cam->s_mutex); + if (cam->users > 0) { + cafe_ctlr_power_up(cam); + __cafe_cam_reset(cam); + } + mutex_unlock(&cam->s_mutex); + set_bit(CF_CONFIG_NEEDED, &cam->flags); if (cam->state == S_SPECREAD) cam->state = S_IDLE; /* Don't bother restarting */ |