diff options
Diffstat (limited to 'drivers/media/video/cx18/cx18-ioctl.c')
-rw-r--r-- | drivers/media/video/cx18/cx18-ioctl.c | 273 |
1 files changed, 227 insertions, 46 deletions
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 7086aaba77d..e4c9e3d8bac 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -58,12 +58,21 @@ u16 cx18_service2vbi(int type) } } +/* Check if VBI services are allowed on the (field, line) for the video std */ static int valid_service_line(int field, int line, int is_pal) { - return (is_pal && line >= 6 && (line != 23 || field == 0)) || + return (is_pal && line >= 6 && + ((field == 0 && line <= 23) || (field == 1 && line <= 22))) || (!is_pal && line >= 10 && line < 22); } +/* + * For a (field, line, std) and inbound potential set of services for that line, + * return the first valid service of those passed in the incoming set for that + * line in priority order: + * CC, VPS, or WSS over TELETEXT for well known lines + * TELETEXT, before VPS, before CC, before WSS, for other lines + */ static u16 select_service_from_set(int field, int line, u16 set, int is_pal) { u16 valid_set = (is_pal ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525); @@ -90,6 +99,10 @@ static u16 select_service_from_set(int field, int line, u16 set, int is_pal) return 0; } +/* + * Expand the service_set of *fmt into valid service_lines for the std, + * and clear the passed in fmt->service_set + */ void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) { u16 set = fmt->service_set; @@ -102,7 +115,25 @@ void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) } } +/* + * Sanitize the service_lines in *fmt per the video std, and return 1 + * if any service_line is left as valid after santization + */ +static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +{ + int f, l; + u16 set = 0; + + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + fmt->service_lines[f][l] = select_service_from_set(f, l, fmt->service_lines[f][l], is_pal); + set |= fmt->service_lines[f][l]; + } + } + return set != 0; +} +/* Compute the service_set from the assumed valid service_lines of *fmt */ u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt) { int f, l; @@ -129,10 +160,8 @@ static int cx18_g_fmt_vid_cap(struct file *file, void *fh, pixfmt->priv = 0; if (id->type == CX18_ENC_STREAM_TYPE_YUV) { pixfmt->pixelformat = V4L2_PIX_FMT_HM12; - /* YUV size is (Y=(h*w) + UV=(h*(w/2))) */ - pixfmt->sizeimage = - pixfmt->height * pixfmt->width + - pixfmt->height * (pixfmt->width / 2); + /* YUV size is (Y=(h*720) + UV=(h*(720/2))) */ + pixfmt->sizeimage = pixfmt->height * 720 * 3 / 2; pixfmt->bytesperline = 720; } else { pixfmt->pixelformat = V4L2_PIX_FMT_MPEG; @@ -149,8 +178,8 @@ static int cx18_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_vbi_format *vbifmt = &fmt->fmt.vbi; vbifmt->sampling_rate = 27000000; - vbifmt->offset = 248; - vbifmt->samples_per_line = cx->vbi.raw_decoder_line_size - 4; + vbifmt->offset = 248; /* FIXME - slightly wrong for both 50 & 60 Hz */ + vbifmt->samples_per_line = vbi_active_samples - 4; vbifmt->sample_format = V4L2_PIX_FMT_GREY; vbifmt->start[0] = cx->vbi.start[0]; vbifmt->start[1] = cx->vbi.start[1]; @@ -164,7 +193,30 @@ static int cx18_g_fmt_vbi_cap(struct file *file, void *fh, static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - return -EINVAL; + struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + /* sane, V4L2 spec compliant, defaults */ + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + memset(vbifmt->service_lines, 0, sizeof(vbifmt->service_lines)); + vbifmt->service_set = 0; + + /* + * Fetch the configured service_lines and total service_set from the + * digitizer/slicer. Note, cx18_av_vbi() wipes the passed in + * fmt->fmt.sliced under valid calling conditions + */ + if (v4l2_subdev_call(cx->sd_av, video, g_fmt, fmt)) + return -EINVAL; + + /* Ensure V4L2 spec compliant output */ + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + vbifmt->service_set = cx18_get_service_set(vbifmt); + return 0; } static int cx18_try_fmt_vid_cap(struct file *file, void *fh, @@ -174,11 +226,18 @@ static int cx18_try_fmt_vid_cap(struct file *file, void *fh, struct cx18 *cx = id->cx; int w = fmt->fmt.pix.width; int h = fmt->fmt.pix.height; + int min_h = 2; w = min(w, 720); - w = max(w, 1); + w = max(w, 2); + if (id->type == CX18_ENC_STREAM_TYPE_YUV) { + /* YUV height must be a multiple of 32 */ + h &= ~0x1f; + min_h = 32; + } h = min(h, cx->is_50hz ? 576 : 480); - h = max(h, 2); + h = max(h, min_h); + cx18_g_fmt_vid_cap(file, fh, fmt); fmt->fmt.pix.width = w; fmt->fmt.pix.height = h; @@ -194,7 +253,20 @@ static int cx18_try_fmt_vbi_cap(struct file *file, void *fh, static int cx18_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - return -EINVAL; + struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; + vbifmt->reserved[0] = 0; + vbifmt->reserved[1] = 0; + + /* If given a service set, expand it validly & clear passed in set */ + if (vbifmt->service_set) + cx18_expand_service_set(vbifmt, cx->is_50hz); + /* Sanitize the service_lines, and compute the new set if any valid */ + if (check_service_set(vbifmt, cx->is_50hz)) + vbifmt->service_set = cx18_get_service_set(vbifmt); + return 0; } static int cx18_s_fmt_vid_cap(struct file *file, void *fh, @@ -223,7 +295,7 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh, cx->params.width = w; cx->params.height = h; - cx18_av_cmd(cx, VIDIOC_S_FMT, fmt); + v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt); return cx18_g_fmt_vid_cap(file, fh, fmt); } @@ -238,54 +310,131 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh, if (ret) return ret; + /* + * Changing the Encoder's Raw VBI parameters won't have any effect + * if any analog capture is ongoing + */ if (!cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0) return -EBUSY; + /* + * Set the digitizer registers for raw active VBI. + * Note cx18_av_vbi_wipes out alot of the passed in fmt under valid + * calling conditions + */ + ret = v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt); + if (ret) + return ret; + + /* Store our new v4l2 (non-)sliced VBI state */ cx->vbi.sliced_in->service_set = 0; cx->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; - cx18_av_cmd(cx, VIDIOC_S_FMT, fmt); + return cx18_g_fmt_vbi_cap(file, fh, fmt); } static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - return -EINVAL; + struct cx18_open_id *id = fh; + struct cx18 *cx = id->cx; + int ret; + struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; + + ret = v4l2_prio_check(&cx->prio, &id->prio); + if (ret) + return ret; + + cx18_try_fmt_sliced_vbi_cap(file, fh, fmt); + + /* + * Changing the Encoder's Raw VBI parameters won't have any effect + * if any analog capture is ongoing + */ + if (cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0) + return -EBUSY; + + /* + * Set the service_lines requested in the digitizer/slicer registers. + * Note, cx18_av_vbi() wipes some "impossible" service lines in the + * passed in fmt->fmt.sliced under valid calling conditions + */ + ret = v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt); + if (ret) + return ret; + /* Store our current v4l2 sliced VBI settings */ + cx->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in)); + return 0; } static int cx18_g_chip_ident(struct file *file, void *fh, struct v4l2_dbg_chip_ident *chip) { struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + int err = 0; chip->ident = V4L2_IDENT_NONE; chip->revision = 0; - if (v4l2_chip_match_host(&chip->match)) { - chip->ident = V4L2_IDENT_CX23418; - return 0; + switch (chip->match.type) { + case V4L2_CHIP_MATCH_HOST: + switch (chip->match.addr) { + case 0: + chip->ident = V4L2_IDENT_CX23418; + chip->revision = cx18_read_reg(cx, 0xC72028); + break; + case 1: + /* + * The A/V decoder is always present, but in the rare + * case that the card doesn't have analog, we don't + * use it. We find it w/o using the cx->sd_av pointer + */ + cx18_call_hw(cx, CX18_HW_418_AV, + core, g_chip_ident, chip); + break; + default: + /* + * Could return ident = V4L2_IDENT_UNKNOWN if we had + * other host chips at higher addresses, but we don't + */ + err = -EINVAL; /* per V4L2 spec */ + break; + } + break; + case V4L2_CHIP_MATCH_I2C_DRIVER: + /* If needed, returns V4L2_IDENT_AMBIGUOUS without extra work */ + cx18_call_all(cx, core, g_chip_ident, chip); + break; + case V4L2_CHIP_MATCH_I2C_ADDR: + /* + * We could return V4L2_IDENT_UNKNOWN, but we don't do the work + * to look if a chip is at the address with no driver. That's a + * dangerous thing to do with EEPROMs anyway. + */ + cx18_call_all(cx, core, g_chip_ident, chip); + break; + default: + err = -EINVAL; + break; } - cx18_call_i2c_clients(cx, VIDIOC_DBG_G_CHIP_IDENT, chip); - return 0; + return err; } #ifdef CONFIG_VIDEO_ADV_DEBUG static int cx18_cxc(struct cx18 *cx, unsigned int cmd, void *arg) { struct v4l2_dbg_register *regs = arg; - unsigned long flags; if (!capable(CAP_SYS_ADMIN)) return -EPERM; if (regs->reg >= CX18_MEM_OFFSET + CX18_MEM_SIZE) return -EINVAL; - spin_lock_irqsave(&cx18_cards_lock, flags); regs->size = 4; - if (cmd == VIDIOC_DBG_G_REGISTER) - regs->val = cx18_read_enc(cx, regs->reg); - else + if (cmd == VIDIOC_DBG_S_REGISTER) cx18_write_enc(cx, regs->val, regs->reg); - spin_unlock_irqrestore(&cx18_cards_lock, flags); + else + regs->val = cx18_read_enc(cx, regs->reg); return 0; } @@ -296,7 +445,8 @@ static int cx18_g_register(struct file *file, void *fh, if (v4l2_chip_match_host(®->match)) return cx18_cxc(cx, VIDIOC_DBG_G_REGISTER, reg); - cx18_call_i2c_clients(cx, VIDIOC_DBG_G_REGISTER, reg); + /* FIXME - errors shouldn't be ignored */ + cx18_call_all(cx, core, g_register, reg); return 0; } @@ -307,7 +457,8 @@ static int cx18_s_register(struct file *file, void *fh, if (v4l2_chip_match_host(®->match)) return cx18_cxc(cx, VIDIOC_DBG_S_REGISTER, reg); - cx18_call_i2c_clients(cx, VIDIOC_DBG_S_REGISTER, reg); + /* FIXME - errors shouldn't be ignored */ + cx18_call_all(cx, core, s_register, reg); return 0; } #endif @@ -335,7 +486,8 @@ static int cx18_querycap(struct file *file, void *fh, strlcpy(vcap->driver, CX18_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, cx->card_name, sizeof(vcap->card)); - snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(cx->dev)); + snprintf(vcap->bus_info, sizeof(vcap->bus_info), + "PCI:%s", pci_name(cx->pci_dev)); vcap->version = CX18_DRIVER_VERSION; /* version */ vcap->capabilities = cx->v4l2_cap; /* capabilities */ return 0; @@ -403,7 +555,8 @@ static int cx18_s_crop(struct file *file, void *fh, struct v4l2_crop *crop) if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - return cx18_av_cmd(cx, VIDIOC_S_CROP, crop); + CX18_DEBUG_WARN("VIDIOC_S_CROP not implemented\n"); + return -EINVAL; } static int cx18_g_crop(struct file *file, void *fh, struct v4l2_crop *crop) @@ -412,7 +565,8 @@ static int cx18_g_crop(struct file *file, void *fh, struct v4l2_crop *crop) if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - return cx18_av_cmd(cx, VIDIOC_G_CROP, crop); + CX18_DEBUG_WARN("VIDIOC_G_CROP not implemented\n"); + return -EINVAL; } static int cx18_enum_fmt_vid_cap(struct file *file, void *fh, @@ -483,7 +637,7 @@ static int cx18_g_frequency(struct file *file, void *fh, if (vf->tuner != 0) return -EINVAL; - cx18_call_i2c_clients(cx, VIDIOC_G_FREQUENCY, vf); + cx18_call_all(cx, tuner, g_frequency, vf); return 0; } @@ -502,7 +656,7 @@ int cx18_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) cx18_mute(cx); CX18_DEBUG_INFO("v4l2 ioctl: set frequency %d\n", vf->frequency); - cx18_call_i2c_clients(cx, VIDIOC_S_FREQUENCY, vf); + cx18_call_all(cx, tuner, s_frequency, vf); cx18_unmute(cx); return 0; } @@ -547,12 +701,11 @@ int cx18_s_std(struct file *file, void *fh, v4l2_std_id *std) cx->vbi.count = cx->is_50hz ? 18 : 12; cx->vbi.start[0] = cx->is_50hz ? 6 : 10; cx->vbi.start[1] = cx->is_50hz ? 318 : 273; - cx->vbi.sliced_decoder_line_size = cx->is_60hz ? 272 : 284; CX18_DEBUG_INFO("Switching standard to %llx.\n", (unsigned long long) cx->std); /* Tuner */ - cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std); + cx18_call_all(cx, tuner, s_std, cx->std); return 0; } @@ -569,9 +722,7 @@ static int cx18_s_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) if (vt->index != 0) return -EINVAL; - /* Setting tuner can only set audio mode */ - cx18_call_i2c_clients(cx, VIDIOC_S_TUNER, vt); - + cx18_call_all(cx, tuner, s_tuner, vt); return 0; } @@ -582,7 +733,7 @@ static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) if (vt->index != 0) return -EINVAL; - cx18_call_i2c_clients(cx, VIDIOC_G_TUNER, vt); + cx18_call_all(cx, tuner, g_tuner, vt); if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name)); @@ -598,7 +749,30 @@ static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) static int cx18_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced_vbi_cap *cap) { - return -EINVAL; + struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + int set = cx->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525; + int f, l; + + if (cap->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + + cap->service_set = 0; + for (f = 0; f < 2; f++) { + for (l = 0; l < 24; l++) { + if (valid_service_line(f, l, cx->is_50hz)) { + /* + * We can find all v4l2 supported vbi services + * for the standard, on a valid line for the std + */ + cap->service_lines[f][l] = set; + cap->service_set |= set; + } else + cap->service_lines[f][l] = 0; + } + } + for (f = 0; f < 3; f++) + cap->reserved[f] = 0; + return 0; } static int cx18_g_enc_index(struct file *file, void *fh, @@ -708,13 +882,15 @@ static int cx18_log_status(struct file *file, void *fh) struct v4l2_audio audin; int i; - CX18_INFO("================= START STATUS CARD #%d =================\n", cx->num); + CX18_INFO("================= START STATUS CARD #%d " + "=================\n", cx->instance); + CX18_INFO("Version: %s Card: %s\n", CX18_VERSION, cx->card_name); if (cx->hw_flags & CX18_HW_TVEEPROM) { struct tveeprom tv; cx18_read_eeprom(cx, &tv); } - cx18_call_i2c_clients(cx, VIDIOC_LOG_STATUS, NULL); + cx18_call_all(cx, core, log_status); cx18_get_input(cx, cx->active_input, &vidin); cx18_get_audio_input(cx, cx->audio_input, &audin); CX18_INFO("Video Input: %s\n", vidin.name); @@ -725,12 +901,12 @@ static int cx18_log_status(struct file *file, void *fh) mutex_unlock(&cx->gpio_lock); CX18_INFO("Tuner: %s\n", test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ? "Radio" : "TV"); - cx2341x_log_status(&cx->params, cx->name); + cx2341x_log_status(&cx->params, cx->v4l2_dev.name); CX18_INFO("Status flags: 0x%08lx\n", cx->i_flags); for (i = 0; i < CX18_MAX_STREAMS; i++) { struct cx18_stream *s = &cx->streams[i]; - if (s->v4l2dev == NULL || s->buffers == 0) + if (s->video_dev == NULL || s->buffers == 0) continue; CX18_INFO("Stream %s: status 0x%04lx, %d%% of %d KiB (%d buffers) in use\n", s->name, s->s_flags, @@ -740,7 +916,8 @@ static int cx18_log_status(struct file *file, void *fh) CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n", (long long)cx->mpg_data_received, (long long)cx->vbi_data_inserted); - CX18_INFO("================== END STATUS CARD #%d ==================\n", cx->num); + CX18_INFO("================== END STATUS CARD #%d " + "==================\n", cx->instance); return 0; } @@ -754,7 +931,8 @@ static long cx18_default(struct file *file, void *fh, int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_INT_S_AUDIO_ROUTING(%d, %d)\n", route->input, route->output); - cx18_audio_set_route(cx, route); + cx18_call_hw(cx, cx->card->hw_audio_ctrl, audio, s_routing, + route); break; } @@ -762,7 +940,8 @@ static long cx18_default(struct file *file, void *fh, int cmd, void *arg) u32 val = *(u32 *)arg; if ((val == 0) || (val & 0x01)) - cx18_reset_ir_gpio(&cx->i2c_algo_cb_data[0]); + cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL, core, reset, + (u32) CX18_GPIO_RESET_Z8F0811); break; } @@ -782,6 +961,8 @@ long cx18_v4l2_ioctl(struct file *filp, unsigned int cmd, mutex_lock(&cx->serialize_lock); + /* FIXME - consolidate v4l2_prio_check()'s here */ + if (cx18_debug & CX18_DBGFLG_IOCTL) vfd->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; res = video_ioctl2(filp, cmd, arg); |