diff options
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-417.c')
| -rw-r--r-- | drivers/media/video/cx23885/cx23885-417.c | 64 |
1 files changed, 41 insertions, 23 deletions
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 2943bfd32a9..6c3b51ce337 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -31,6 +31,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/firmware.h> +#include <linux/smp_lock.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> #include <media/cx2341x.h> @@ -57,7 +58,8 @@ MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages"); #define dprintk(level, fmt, arg...)\ do { if (v4l_debug >= level) \ - printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\ + printk(KERN_DEBUG "%s: " fmt, \ + (dev) ? dev->name : "cx23885[?]", ## arg); \ } while (0) static struct cx23885_tvnorm cx23885_tvnorms[] = { @@ -628,6 +630,39 @@ int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value) return retval; } +void mc417_gpio_set(struct cx23885_dev *dev, u32 mask) +{ + u32 val; + + /* Set the gpio value */ + mc417_register_read(dev, 0x900C, &val); + val |= (mask & 0x000ffff); + mc417_register_write(dev, 0x900C, val); +} + +void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask) +{ + u32 val; + + /* Clear the gpio value */ + mc417_register_read(dev, 0x900C, &val); + val &= ~(mask & 0x0000ffff); + mc417_register_write(dev, 0x900C, val); +} + +void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput) +{ + u32 val; + + /* Enable GPIO direction bits */ + mc417_register_read(dev, 0x9020, &val); + if (asoutput) + val |= (mask & 0x0000ffff); + else + val &= ~(mask & 0x0000ffff); + + mc417_register_write(dev, 0x9020, val); +} /* ------------------------------------------------------------------ */ /* MPEG encoder API */ @@ -953,25 +988,8 @@ static int cx23885_load_firmware(struct cx23885_dev *dev) retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); - /* Restore GPIO settings, make sure EIO14 is enabled as an output. */ - dprintk(2, "%s: GPIO output EIO 0-15 was = 0x%x\n", - __func__, gpio_output); - /* Power-up seems to have GPIOs AFU. This was causing digital side - * to fail at power-up. Seems GPIOs should be set to 0x10ff0411 at - * power-up. - * gpio_output |= (1<<14); - */ - /* Note: GPIO14 is specific to the HVR1800 here */ - gpio_output = 0x10ff0411 | (1<<14); - retval |= mc417_register_write(dev, 0x9020, gpio_output | (1<<14)); - dprintk(2, "%s: GPIO output EIO 0-15 now = 0x%x\n", - __func__, gpio_output); - - dprintk(1, "%s: GPIO value EIO 0-15 was = 0x%x\n", - __func__, value); - value |= (1<<14); - dprintk(1, "%s: GPIO value EIO 0-15 now = 0x%x\n", - __func__, value); + /* F/W power up disturbs the GPIOs, restore state */ + retval |= mc417_register_write(dev, 0x9020, gpio_output); retval |= mc417_register_write(dev, 0x900C, value); retval |= mc417_register_read(dev, IVTV_REG_VPU, &value); @@ -1676,6 +1694,7 @@ static struct v4l2_file_operations mpeg_fops = { .read = mpeg_read, .poll = mpeg_poll, .mmap = mpeg_mmap, + .ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { @@ -1712,6 +1731,8 @@ static struct video_device cx23885_mpeg_template = { .fops = &mpeg_fops, .ioctl_ops = &mpeg_ioctl_ops, .minor = -1, + .tvnorms = CX23885_NORMS, + .current_norm = V4L2_STD_NTSC_M, }; void cx23885_417_unregister(struct cx23885_dev *dev) @@ -1783,9 +1804,6 @@ int cx23885_417_register(struct cx23885_dev *dev) return err; } - /* Initialize MC417 registers */ - cx23885_mc417_init(dev); - printk(KERN_INFO "%s: registered device video%d [mpeg]\n", dev->name, dev->v4l_device->num); |