diff options
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-cards.c')
-rw-r--r-- | drivers/media/video/cx23885/cx23885-cards.c | 91 |
1 files changed, 85 insertions, 6 deletions
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index ce29b5e34a1..bfdf79f1033 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -201,6 +201,19 @@ struct cx23885_board cx23885_boards[] = { .name = "Mygica X8506 DMB-TH", .portb = CX23885_MPEG_DVB, }, + [CX23885_BOARD_MAGICPRO_PROHDTVE2] = { + .name = "Magic-Pro ProHDTV Extreme 2", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1850] = { + .name = "Hauppauge WinTV-HVR1850", + .portb = CX23885_MPEG_ENCODER, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_COMPRO_VIDEOMATE_E800] = { + .name = "Compro VideoMate E800", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -324,6 +337,18 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x14f1, .subdevice = 0x8651, .card = CX23885_BOARD_MYGICA_X8506, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8657, + .card = CX23885_BOARD_MAGICPRO_PROHDTVE2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8541, + .card = CX23885_BOARD_HAUPPAUGE_HVR1850, + }, { + .subvendor = 0x1858, + .subdevice = 0xe800, + .card = CX23885_BOARD_COMPRO_VIDEOMATE_E800, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -483,8 +508,13 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) /* WinTV-HVR1700 (PCIe, OEM, No IR, full height) * DVB-T and MPEG2 HW Encoder */ break; + case 85021: + /* WinTV-HVR1850 (PCIe, OEM, RCA in, IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + break; default: - printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n", + printk(KERN_WARNING "%s: warning: " + "unknown hauppauge model #%d\n", dev->name, tv.model); break; } @@ -514,6 +544,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: /* Tuner Reset Command */ bitmask = 0x04; break; @@ -574,13 +605,23 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* CX23417 GPIO's */ /* EIO15 Zilog Reset */ /* EIO14 S5H1409/CX24227 Reset */ + mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1); + + /* Put the demod into reset and protect the eeprom */ + mc417_gpio_clear(dev, GPIO_15 | GPIO_14); + mdelay(100); + + /* Bring the demod and blaster out of reset */ + mc417_gpio_set(dev, GPIO_15 | GPIO_14); + mdelay(100); /* Force the TDA8295A into reset and back */ - cx_set(GP0_IO, 0x00040004); + cx23885_gpio_enable(dev, GPIO_2, 1); + cx23885_gpio_set(dev, GPIO_2); mdelay(20); - cx_clear(GP0_IO, 0x00000004); + cx23885_gpio_clear(dev, GPIO_2); mdelay(20); - cx_set(GP0_IO, 0x00040004); + cx23885_gpio_set(dev, GPIO_2); mdelay(20); break; case CX23885_BOARD_HAUPPAUGE_HVR1200: @@ -655,6 +696,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) break; case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: /* GPIO-2 xc3028 tuner reset */ /* The following GPIO's are on the internal AVCore (cx25840) */ @@ -715,14 +757,45 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx23885_gpio_set(dev, GPIO_9); break; case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: /* GPIO-1 reset XC5000 */ - /* GPIO-2 reset LGS8GL5 */ + /* GPIO-2 reset LGS8GL5 / LGS8G75 */ cx_set(GP0_IO, 0x00060000); cx_clear(GP0_IO, 0x00000006); mdelay(100); cx_set(GP0_IO, 0x00060006); mdelay(100); break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + /* GPIO-0 656_CLK */ + /* GPIO-1 656_D0 */ + /* GPIO-2 Wake# */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + /* GPIO-19 IR_RX */ + /* GPIO-20 C_IR_TX */ + /* GPIO-21 I2S DAT */ + /* GPIO-22 I2S WCLK */ + /* GPIO-23 I2S BCLK */ + /* ALT GPIO: EXP GPIO LATCH */ + + /* CX23417 GPIO's */ + /* GPIO-14 S5H1411/CX24228 Reset */ + /* GPIO-13 EEPROM write protect */ + mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1); + + /* Put the demod into reset and protect the eeprom */ + mc417_gpio_clear(dev, GPIO_14 | GPIO_13); + mdelay(100); + + /* Bring the demod out of reset */ + mc417_gpio_set(dev, GPIO_14); + mdelay(100); + + /* CX24228 GPIO */ + /* Connected to IF / Mux */ + break; } } @@ -739,6 +812,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_HAUPPAUGE_HVR1850: /* FIXME: Implement me */ break; case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: @@ -778,6 +852,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_HAUPPAUGE_HVR1850: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xc0); break; @@ -827,6 +902,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: ts1->gen_ctrl_val = 0x5; /* Parallel */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; @@ -844,6 +920,8 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ @@ -860,9 +938,10 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[2].i2c_adap, - "cx25840", "cx25840", 0x88 >> 1); + "cx25840", "cx25840", 0x88 >> 1, NULL); v4l2_subdev_call(dev->sd_cx25840, core, load_fw); break; } |