diff options
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-dvb.c')
| -rw-r--r-- | drivers/media/video/cx23885/cx23885-dvb.c | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 022aa391937..0a2e6558cd6 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -31,6 +31,7 @@ #include <media/v4l2-common.h> #include "s5h1409.h" +#include "s5h1411.h" #include "mt2131.h" #include "tda8290.h" #include "tda18271.h" @@ -164,12 +165,38 @@ static struct s5h1409_config hauppauge_hvr1500q_config = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; +static struct s5h1409_config dvico_s5h1409_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1411_config dvico_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_ON, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, .tuner_callback = cx23885_tuner_callback }; +static struct xc5000_config dvico_xc5000_tunerconfig = { + .i2c_address = 0x64, + .if_khz = 5380, + .tuner_callback = cx23885_tuner_callback +}; + static struct tda829x_config tda829x_no_probe = { .probe_tuner = TDA829X_DONT_PROBE, }; @@ -453,6 +480,21 @@ static int dvb_register(struct cx23885_tsport *port) fe->ops.tuner_ops.set_config(fe, &ctl); } break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + i2c_bus = &dev->i2c_bus[port->nr - 1]; + + port->dvb.frontend = dvb_attach(s5h1409_attach, + &dvico_s5h1409_config, + &i2c_bus->i2c_adap); + if (port->dvb.frontend == NULL) + port->dvb.frontend = dvb_attach(s5h1411_attach, + &dvico_s5h1411_config, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) + dvb_attach(xc5000_attach, port->dvb.frontend, + &i2c_bus->i2c_adap, + &dvico_xc5000_tunerconfig, i2c_bus); + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); |