diff options
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-dvb.c')
| -rw-r--r-- | drivers/media/video/cx23885/cx23885-dvb.c | 166 |
1 files changed, 164 insertions, 2 deletions
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 1c454128a9d..d43c7439676 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -30,6 +30,7 @@ #include "cx23885.h" #include <media/v4l2-common.h> +#include "dvb_ca_en50221.h" #include "s5h1409.h" #include "s5h1411.h" #include "mt2131.h" @@ -43,6 +44,13 @@ #include "dib7000p.h" #include "dibx000_common.h" #include "zl10353.h" +#include "stv0900.h" +#include "stv6110.h" +#include "lnbh24.h" +#include "cx24116.h" +#include "cimax2.h" +#include "netup-eeprom.h" +#include "netup-init.h" static unsigned int debug; @@ -308,11 +316,63 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = { .no_tuner = 1, }; +static struct stv0900_config netup_stv0900_config = { + .demod_address = 0x68, + .xtal = 27000000, + .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ + .diseqc_mode = 2,/* 2/3 PWM */ + .path1_mode = 2,/*Serial continues clock */ + .path2_mode = 2,/*Serial continues clock */ + .tun1_maddress = 0,/* 0x60 */ + .tun2_maddress = 3,/* 0x63 */ + .tun1_adc = 1,/* 1 Vpp */ + .tun2_adc = 1,/* 1 Vpp */ +}; + +static struct stv6110_config netup_stv6110_tunerconfig_a = { + .i2c_address = 0x60, + .mclk = 27000000, + .iq_wiring = 0, +}; + +static struct stv6110_config netup_stv6110_tunerconfig_b = { + .i2c_address = 0x63, + .mclk = 27000000, + .iq_wiring = 1, +}; + +static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + if (voltage == SEC_VOLTAGE_18) + cx_write(MC417_RWD, 0x00001e00);/* GPIO-13 high */ + else if (voltage == SEC_VOLTAGE_13) + cx_write(MC417_RWD, 0x00001a00);/* GPIO-13 low */ + else + cx_write(MC417_RWD, 0x00001800);/* GPIO-12 low */ + return 0; +} + +static struct cx24116_config tbs_cx24116_config = { + .demod_address = 0x05, +}; + +static struct cx24116_config tevii_cx24116_config = { + .demod_address = 0x55, +}; + +static struct cx24116_config dvbworld_cx24116_config = { + .demod_address = 0x05, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; struct cx23885_i2c *i2c_bus = NULL; struct videobuf_dvb_frontend *fe0; + int ret; /* Get the first frontend */ fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); @@ -526,6 +586,78 @@ static int dvb_register(struct cx23885_tsport *port) fe->ops.tuner_ops.set_config(fe, &ctl); } break; + case CX23885_BOARD_TBS_6920: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &tbs_cx24116_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage; + + break; + case CX23885_BOARD_TEVII_S470: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &tevii_cx24116_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage; + + break; + case CX23885_BOARD_DVBWORLD_2005: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &dvbworld_cx24116_config, + &i2c_bus->i2c_adap); + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + i2c_bus = &dev->i2c_bus[0]; + switch (port->nr) { + /* port B */ + case 1: + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &netup_stv0900_config, + &i2c_bus->i2c_adap, 0); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(stv6110_attach, + fe0->dvb.frontend, + &netup_stv6110_tunerconfig_a, + &i2c_bus->i2c_adap)) { + if (!dvb_attach(lnbh24_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + LNBH24_PCL, 0, 0x09)) + printk(KERN_ERR + "No LNBH24 found!\n"); + + } + } + break; + /* port C */ + case 2: + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &netup_stv0900_config, + &i2c_bus->i2c_adap, 1); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(stv6110_attach, + fe0->dvb.frontend, + &netup_stv6110_tunerconfig_b, + &i2c_bus->i2c_adap)) { + if (!dvb_attach(lnbh24_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + LNBH24_PCL, 0, 0x0a)) + printk(KERN_ERR + "No LNBH24 found!\n"); + + } + } + break; + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", @@ -541,15 +673,39 @@ static int dvb_register(struct cx23885_tsport *port) fe0->dvb.frontend->callback = cx23885_tuner_callback; /* Put the analog decoder in standby to keep it quiet */ - cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL); + call_all(dev, core, s_standby, 0); if (fe0->dvb.frontend->ops.analog_ops.standby) fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend); /* register everything */ - return videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, + ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, &dev->pci->dev, adapter_nr, 0); + /* init CI & MAC */ + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: { + static struct netup_card_info cinfo; + + netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); + memcpy(port->frontends.adapter.proposed_mac, + cinfo.port[port->nr - 1].mac, 6); + printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=" + "%02X:%02X:%02X:%02X:%02X:%02X\n", + port->nr, + port->frontends.adapter.proposed_mac[0], + port->frontends.adapter.proposed_mac[1], + port->frontends.adapter.proposed_mac[2], + port->frontends.adapter.proposed_mac[3], + port->frontends.adapter.proposed_mac[4], + port->frontends.adapter.proposed_mac[5]); + + netup_ci_init(port); + break; + } + } + + return ret; } int cx23885_dvb_register(struct cx23885_tsport *port) @@ -622,6 +778,12 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port) if (fe0->dvb.frontend) videobuf_dvb_unregister_bus(&port->frontends); + switch (port->dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + netup_ci_exit(port); + break; + } + return 0; } |