diff options
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-dvb.c')
| -rw-r--r-- | drivers/media/video/cx23885/cx23885-dvb.c | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 1b9a85e43d4..870d6e197d6 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -40,6 +40,8 @@ #include "dvb-pll.h" #include "tuner-xc2028.h" #include "tuner-simple.h" +#include "dib7000p.h" +#include "dibx000_common.h" static unsigned int debug; @@ -189,6 +191,92 @@ static struct tda18271_config hauppauge_hvr1200_tuner_config = { .gate = TDA18271_GATE_ANALOG, }; +struct dibx000_agc_config xc3028_agc_config = { + BAND_VHF | BAND_UHF, /* band_caps */ + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, + * P_agc_nb_est=2, P_agc_write=0 + */ + (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | + (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ + + 712, /* inv_gain */ + 21, /* time_stabiliz */ + + 0, /* alpha_level */ + 118, /* thlock */ + + 0, /* wbd_inv */ + 2867, /* wbd_ref */ + 0, /* wbd_sel */ + 2, /* wbd_alpha */ + + 0, /* agc1_max */ + 0, /* agc1_min */ + 39718, /* agc2_max */ + 9930, /* agc2_min */ + 0, /* agc1_pt1 */ + 0, /* agc1_pt2 */ + 0, /* agc1_pt3 */ + 0, /* agc1_slope1 */ + 0, /* agc1_slope2 */ + 0, /* agc2_pt1 */ + 128, /* agc2_pt2 */ + 29, /* agc2_slope1 */ + 29, /* agc2_slope2 */ + + 17, /* alpha_mant */ + 27, /* alpha_exp */ + 23, /* beta_mant */ + 51, /* beta_exp */ + + 1, /* perform_agc_softsplit */ +}; + +/* PLL Configuration for COFDM BW_MHz = 8.000000 + * With external clock = 30.000000 */ +struct dibx000_bandwidth_config xc3028_bw_config = { + 60000, /* internal */ + 30000, /* sampling */ + 1, /* pll_cfg: prediv */ + 8, /* pll_cfg: ratio */ + 3, /* pll_cfg: range */ + 1, /* pll_cfg: reset */ + 0, /* pll_cfg: bypass */ + 0, /* misc: refdiv */ + 0, /* misc: bypclk_div */ + 1, /* misc: IO_CLK_en_core */ + 1, /* misc: ADClkSrc */ + 0, /* misc: modulo */ + (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ + (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ + 20452225, /* timf */ + 30000000 /* xtal_hz */ +}; + +static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 0, + .update_lna = NULL, + + .agc_config_count = 1, + .agc = &xc3028_agc_config, + .bw = &xc3028_bw_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + .agc_control = NULL, + .spur_protect = 0, + + .output_mode = OUTMODE_MPEG2_SERIAL, +}; + static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) { struct cx23885_tsport *port = ptr; @@ -343,6 +431,31 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_hvr1200_tuner_config); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1400: + i2c_bus = &dev->i2c_bus[0]; + port->dvb.frontend = dvb_attach(dib7000p_attach, + &i2c_bus->i2c_adap, + 0x12, &hauppauge_hvr1400_dib7000_config); + if (port->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x64, + .callback = cx23885_hvr1500_xc3028_callback, + }; + static struct xc2028_ctrl ctl = { + .fname = "xc3028L-v36.fw", + .max_len = 64, + .demod = 5000, + .d2633 = 1 + }; + + fe = dvb_attach(xc2028_attach, + port->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); |