diff options
Diffstat (limited to 'drivers/media/video/cx23885')
-rw-r--r-- | drivers/media/video/cx23885/Kconfig | 15 | ||||
-rw-r--r-- | drivers/media/video/cx23885/Makefile | 4 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cimax2.c | 472 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cimax2.h | 47 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-417.c | 49 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-cards.c | 94 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-core.c | 43 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-dvb.c | 166 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-i2c.c | 68 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-reg.h | 2 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-video.c | 51 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885.h | 20 | ||||
-rw-r--r-- | drivers/media/video/cx23885/netup-eeprom.c | 107 | ||||
-rw-r--r-- | drivers/media/video/cx23885/netup-eeprom.h | 42 | ||||
-rw-r--r-- | drivers/media/video/cx23885/netup-init.c | 125 | ||||
-rw-r--r-- | drivers/media/video/cx23885/netup-init.h | 25 |
16 files changed, 1189 insertions, 141 deletions
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 00f1e2e8889..fd3fc3e3198 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -15,12 +15,15 @@ config VIDEO_CX23885 select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TDA10048 if !DVB_FE_CUSTOMIZE - select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE - select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE - select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE - select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE - select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE + select DVB_TDA10048 if !DVB_FE_CUSTOMISE + select DVB_LNBP21 if !DVB_FE_CUSTOMISE + select DVB_STV6110 if !DVB_FE_CUSTOMISE + select DVB_STV0900 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE ---help--- This is a video4linux driver for Conexant 23885 based TV cards. diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/video/cx23885/Makefile index 29c23b44c13..ab8ea35c9bf 100644 --- a/drivers/media/video/cx23885/Makefile +++ b/drivers/media/video/cx23885/Makefile @@ -1,4 +1,6 @@ -cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o +cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o \ + cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \ + netup-init.o cimax2.o netup-eeprom.o obj-$(CONFIG_VIDEO_CX23885) += cx23885.o diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/video/cx23885/cimax2.c new file mode 100644 index 00000000000..9a6536998d9 --- /dev/null +++ b/drivers/media/video/cx23885/cimax2.c @@ -0,0 +1,472 @@ +/* + * cimax2.c + * + * CIMax2(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru> + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" +#include "dvb_ca_en50221.h" +/**** Bit definitions for MC417_RWD and MC417_OEN registers *** + bits 31-16 ++-----------+ +| Reserved | ++-----------+ + bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 ++-------+-------+-------+-------+-------+-------+-------+-------+ +| WR# | RD# | | ACK# | ADHI | ADLO | CS1# | CS0# | ++-------+-------+-------+-------+-------+-------+-------+-------+ + bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 ++-------+-------+-------+-------+-------+-------+-------+-------+ +| DATA7| DATA6| DATA5| DATA4| DATA3| DATA2| DATA1| DATA0| ++-------+-------+-------+-------+-------+-------+-------+-------+ +***/ +/* MC417 */ +#define NETUP_DATA 0x000000ff +#define NETUP_WR 0x00008000 +#define NETUP_RD 0x00004000 +#define NETUP_ACK 0x00001000 +#define NETUP_ADHI 0x00000800 +#define NETUP_ADLO 0x00000400 +#define NETUP_CS1 0x00000200 +#define NETUP_CS0 0x00000100 +#define NETUP_EN_ALL 0x00001000 +#define NETUP_CTRL_OFF (NETUP_CS1 | NETUP_CS0 | NETUP_WR | NETUP_RD) +#define NETUP_CI_CTL 0x04 +#define NETUP_CI_RD 1 + + +static unsigned int ci_dbg; +module_param(ci_dbg, int, 0644); +MODULE_PARM_DESC(ci_dbg, "Enable CI debugging"); + +#define ci_dbg_print(args...) \ + do { \ + if (ci_dbg) \ + printk(KERN_DEBUG args); \ + } while (0) + +/* stores all private variables for communication with CI */ +struct netup_ci_state { + struct dvb_ca_en50221 ca; + struct mutex ca_mutex; + struct i2c_adapter *i2c_adap; + u8 ci_i2c_addr; + int status; + struct work_struct work; + void *priv; +}; + +struct mutex gpio_mutex;/* Two CiMax's uses same GPIO lines */ + +int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg, + u8 *buf, int len) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = addr, + .flags = 0, + .buf = ®, + .len = 1 + }, { + .addr = addr, + .flags = I2C_M_RD, + .buf = buf, + .len = len + } + }; + + ret = i2c_transfer(i2c_adap, msg, 2); + + if (ret != 2) { + ci_dbg_print("%s: i2c read error, Reg = 0x%02x, Status = %d\n", + __func__, reg, ret); + + return -1; + } + + ci_dbg_print("%s: i2c read Addr=0x%04x, Reg = 0x%02x, data = %02x\n", + __func__, addr, reg, buf[0]); + + return 0; +} + +int netup_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg, + u8 *buf, int len) +{ + int ret; + u8 buffer[len + 1]; + + struct i2c_msg msg = { + .addr = addr, + .flags = 0, + .buf = &buffer[0], + .len = len + 1 + }; + + buffer[0] = reg; + memcpy(&buffer[1], buf, len); + + ret = i2c_transfer(i2c_adap, &msg, 1); + + if (ret != 1) { + ci_dbg_print("%s: i2c write error, Reg=[0x%02x], Status=%d\n", + __func__, reg, ret); + return -1; + } + + return 0; +} + +int netup_ci_get_mem(struct cx23885_dev *dev) +{ + int mem; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + + for (;;) { + mem = cx_read(MC417_RWD); + if ((mem & NETUP_ACK) == 0) + break; + if (time_after(jiffies, timeout)) + break; + udelay(1); + } + + cx_set(MC417_RWD, NETUP_CTRL_OFF); + + return mem & 0xff; +} + +int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, + u8 flag, u8 read, int addr, u8 data) +{ + struct netup_ci_state *state = en50221->data; + struct cx23885_tsport *port = state->priv; + struct cx23885_dev *dev = port->dev; + + u8 store; + int mem; + int ret; + + if (0 != slot) + return -EINVAL; + + ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &store, 1); + if (ret != 0) + return ret; + + store &= ~0x0c; + store |= flag; + + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &store, 1); + if (ret != 0) + return ret; + + mutex_lock(&gpio_mutex); + + /* write addr */ + cx_write(MC417_OEN, NETUP_EN_ALL); + cx_write(MC417_RWD, NETUP_CTRL_OFF | + NETUP_ADLO | (0xff & addr)); + cx_clear(MC417_RWD, NETUP_ADLO); + cx_write(MC417_RWD, NETUP_CTRL_OFF | + NETUP_ADHI | (0xff & (addr >> 8))); + cx_clear(MC417_RWD, NETUP_ADHI); + + if (read) /* data in */ + cx_write(MC417_OEN, NETUP_EN_ALL | NETUP_DATA); + else /* data out */ + cx_write(MC417_RWD, NETUP_CTRL_OFF | data); + + /* choose chip */ + cx_clear(MC417_RWD, + (state->ci_i2c_addr == 0x40) ? NETUP_CS0 : NETUP_CS1); + /* read/write */ + cx_clear(MC417_RWD, (read) ? NETUP_RD : NETUP_WR); + mem = netup_ci_get_mem(dev); + + mutex_unlock(&gpio_mutex); + + if (!read) + if (mem < 0) + return -EREMOTEIO; + + ci_dbg_print("%s: %s: addr=[0x%02x], %s=%x\n", __func__, + (read) ? "read" : "write", addr, + (flag == NETUP_CI_CTL) ? "ctl" : "mem", + (read) ? mem : data); + + if (read) + return mem; + + return 0; +} + +int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr) +{ + return netup_ci_op_cam(en50221, slot, 0, NETUP_CI_RD, addr, 0); +} + +int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data) +{ + return netup_ci_op_cam(en50221, slot, 0, 0, addr, data); +} + +int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) +{ + return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, + NETUP_CI_RD, addr, 0); +} + +int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, + u8 addr, u8 data) +{ + return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, 0, addr, data); +} + +int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct netup_ci_state *state = en50221->data; + u8 buf = 0x80; + int ret; + + if (0 != slot) + return -EINVAL; + + udelay(500); + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); + + if (ret != 0) + return ret; + + udelay(500); + + buf = 0x00; + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); + + msleep(1000); + dvb_ca_en50221_camready_irq(&state->ca, 0); + + return 0; + +} + +int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + /* not implemented */ + return 0; +} + +int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot) +{ + struct netup_ci_state *state = en50221->data; + u8 buf = 0x60; + + if (0 != slot) + return -EINVAL; + + return netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); +} + +/* work handler */ +static void netup_read_ci_status(struct work_struct *work) +{ + struct netup_ci_state *state = + container_of(work, struct netup_ci_state, work); + u8 buf[33]; + int ret; + + ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf[0], 33); + + if (ret != 0) + return; + + ci_dbg_print("%s: Slot Status Addr=[0x%04x], Reg=[0x%02x], data=%02x, " + "TS config = %02x\n", __func__, state->ci_i2c_addr, 0, buf[0], + buf[32]); + + if (buf[0] && 1) + state->status = DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + else + state->status = 0; +} + +/* CI irq handler */ +int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status) +{ + struct cx23885_tsport *port = NULL; + struct netup_ci_state *state = NULL; + + if (pci_status & PCI_MSK_GPIO0) + port = &dev->ts1; + else if (pci_status & PCI_MSK_GPIO1) + port = &dev->ts2; + else /* who calls ? */ + return 0; + + state = port->port_priv; + + schedule_work(&state->work); + + return 1; +} + +int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) +{ + struct netup_ci_state *state = en50221->data; + + if (0 != slot) + return -EINVAL; + + return state->status; +} + +int netup_ci_init(struct cx23885_tsport *port) +{ + struct netup_ci_state *state; + u8 cimax_init[34] = { + 0x00, /* module A control*/ + 0x00, /* auto select mask high A */ + 0x00, /* auto select mask low A */ + 0x00, /* auto select pattern high A */ + 0x00, /* auto select pattern low A */ + 0x44, /* memory access time A */ + 0x00, /* invert input A */ + 0x00, /* RFU */ + 0x00, /* RFU */ + 0x00, /* module B control*/ + 0x00, /* auto select mask high B */ + 0x00, /* auto select mask low B */ + 0x00, /* auto select pattern high B */ + 0x00, /* auto select pattern low B */ + 0x44, /* memory access time B */ + 0x00, /* invert input B */ + 0x00, /* RFU */ + 0x00, /* RFU */ + 0x00, /* auto select mask high Ext */ + 0x00, /* auto select mask low Ext */ + 0x00, /* auto select pattern high Ext */ + 0x00, /* auto select pattern low Ext */ + 0x00, /* RFU */ + 0x02, /* destination - module A */ + 0x01, /* power on (use it like store place) */ + 0x00, /* RFU */ + 0x00, /* int status read only */ + 0x01, /* all int unmasked */ + 0x04, /* int config */ + 0x00, /* USCG1 */ + 0x04, /* ack active low */ + 0x00, /* LOCK = 0 */ + 0x33, /* serial mode, rising in, rising out, MSB first*/ + 0x31, /* syncronization */ + }; + int ret; + + ci_dbg_print("%s\n", __func__); + state = kzalloc(sizeof(struct netup_ci_state), GFP_KERNEL); + if (!state) { + ci_dbg_print("%s: Unable create CI structure!\n", __func__); + ret = -ENOMEM; + goto err; + } + + port->port_priv = state; + + switch (port->nr) { + case 1: + state->ci_i2c_addr = 0x40; + mutex_init(&gpio_mutex); + break; + case 2: + state->ci_i2c_addr = 0x41; + break; + } + + state->i2c_adap = &port->dev->i2c_bus[0].i2c_adap; + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = netup_ci_read_attribute_mem; + state->ca.write_attribute_mem = netup_ci_write_attribute_mem; + state->ca.read_cam_control = netup_ci_read_cam_ctl; + state->ca.write_cam_control = netup_ci_write_cam_ctl; + state->ca.slot_reset = netup_ci_slot_reset; + state->ca.slot_shutdown = netup_ci_slot_shutdown; + state->ca.slot_ts_enable = netup_ci_slot_ts_ctl; + state->ca.poll_slot_status = netup_poll_ci_slot_status; + state->ca.data = state; + state->priv = port; + + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &cimax_init[0], 34); + /* lock registers */ + ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0x1f, &cimax_init[0x18], 1); + /* power on slots */ + ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0x18, &cimax_init[0x18], 1); + + if (0 != ret) + goto err; + + ret = dvb_ca_en50221_init(&port->frontends.adapter, + &state->ca, + /* flags */ 0, + /* n_slots */ 1); + if (0 != ret) + goto err; + + INIT_WORK(&state->work, netup_read_ci_status); + + ci_dbg_print("%s: CI initialized!\n", __func__); + + return 0; +err: + ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret); + kfree(state); + return ret; +} + +void netup_ci_exit(struct cx23885_tsport *port) +{ + struct netup_ci_state *state; + + if (NULL == port) + return; + + state = (struct netup_ci_state *)port->port_priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + dvb_ca_en50221_release(&state->ca); + kfree(state); +} diff --git a/drivers/media/video/cx23885/cimax2.h b/drivers/media/video/cx23885/cimax2.h new file mode 100644 index 00000000000..518744a4c8a --- /dev/null +++ b/drivers/media/video/cx23885/cimax2.h @@ -0,0 +1,47 @@ +/* + * cimax2.h + * + * CIMax(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru> + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef CIMAX2_H +#define CIMAX2_H +#include "dvb_ca_en50221.h" + +extern int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr); +extern int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data); +extern int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, + int slot, u8 addr); +extern int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, + int slot, u8 addr, u8 data); +extern int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot); +extern int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot); +extern int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot); +extern int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status); +extern int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, + int slot, int open); +extern int netup_ci_init(struct cx23885_tsport *port); +extern void netup_ci_exit(struct cx23885_tsport *port); + +#endif diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index bfe25841dbf..6f5df90af93 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -896,7 +896,7 @@ static int cx23885_load_firmware(struct cx23885_dev *dev) if (retval != 0) { printk(KERN_ERR "ERROR: Hotplug firmware request failed (%s).\n", - CX2341X_FIRM_ENC_FILENAME); + CX23885_FIRM_IMAGE_NAME); printk(KERN_ERR "Please fix your hotplug setup, the board will " "not work without firmware loaded!\n"); return -1; @@ -1198,21 +1198,16 @@ static int vidioc_enum_input(struct file *file, void *priv, struct cx23885_fh *fh = file->private_data; struct cx23885_dev *dev = fh->dev; struct cx23885_input *input; - unsigned int n; + int n; - n = i->index; - - if (n >= 4) + if (i->index >= 4) return -EINVAL; - input = &cx23885_boards[dev->board].input[n]; + input = &cx23885_boards[dev->board].input[i->index]; if (input->type == 0) return -EINVAL; - memset(i, 0, sizeof(*i)); - i->index = n; - /* FIXME * strcpy(i->name, input->name); */ strcpy(i->name, "unset"); @@ -1255,10 +1250,8 @@ static int vidioc_g_tuner(struct file *file, void *priv, return -EINVAL; if (0 != t->index) return -EINVAL; - memset(t, 0, sizeof(*t)); strcpy(t->name, "Television"); - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_TUNER, t); - cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_G_TUNER, t); + call_all(dev, tuner, g_tuner, t); dprintk(1, "VIDIOC_G_TUNER: tuner type %d\n", t->type); @@ -1275,7 +1268,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, return -EINVAL; /* Update the A/V core */ - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_TUNER, t); + call_all(dev, tuner, s_tuner, t); return 0; } @@ -1286,14 +1279,12 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct cx23885_fh *fh = file->private_data; struct cx23885_dev *dev = fh->dev; - memset(f, 0, sizeof(*f)); if (UNSET == dev->tuner_type) return -EINVAL; f->type = V4L2_TUNER_ANALOG_TV; f->frequency = dev->freq; - /* Assumption that tuner is always on bus 1 */ - cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_G_FREQUENCY, f); + call_all(dev, tuner, g_frequency, f); return 0; } @@ -1320,8 +1311,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, return -EINVAL; dev->freq = f->frequency; - /* Assumption that tuner is always on bus 1 */ - cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_S_FREQUENCY, f); + call_all(dev, tuner, s_frequency, f); cx23885_initialize_codec(dev); @@ -1335,7 +1325,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct cx23885_dev *dev = fh->dev; /* Update the A/V core */ - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_CTRL, ctl); + call_all(dev, core, s_ctrl, ctl); return 0; } @@ -1346,7 +1336,6 @@ static int vidioc_querycap(struct file *file, void *priv, struct cx23885_dev *dev = fh->dev; struct cx23885_tsport *tsport = &dev->ts1; - memset(cap, 0, sizeof(*cap)); strcpy(cap->driver, dev->name); strlcpy(cap->card, cx23885_boards[tsport->dev->board].name, sizeof(cap->card)); @@ -1366,16 +1355,10 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - int index; - - index = f->index; - if (index != 0) + if (f->index != 0) return -EINVAL; - memset(f, 0, sizeof(*f)); - f->index = index; strlcpy(f->description, "MPEG", sizeof(f->description)); - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; f->pixelformat = V4L2_PIX_FMT_MPEG; return 0; @@ -1387,8 +1370,6 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, struct cx23885_fh *fh = file->private_data; struct cx23885_dev *dev = fh->dev; - memset(f, 0, sizeof(*f)); - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; f->fmt.pix.bytesperline = 0; f->fmt.pix.sizeimage = @@ -1408,12 +1389,10 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, struct cx23885_fh *fh = file->private_data; struct cx23885_dev *dev = fh->dev; - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; f->fmt.pix.bytesperline = 0; f->fmt.pix.sizeimage = dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; - f->fmt.pix.sizeimage = f->fmt.pix.colorspace = 0; dprintk(1, "VIDIOC_TRY_FMT: w: %d, h: %d, f: %d\n", dev->ts1.width, dev->ts1.height, fh->mpegq.field); @@ -1426,7 +1405,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct cx23885_fh *fh = file->private_data; struct cx23885_dev *dev = fh->dev; - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; f->fmt.pix.bytesperline = 0; f->fmt.pix.sizeimage = @@ -1543,12 +1521,7 @@ static int vidioc_log_status(struct file *file, void *priv) printk(KERN_INFO "%s/2: ============ START LOG STATUS ============\n", dev->name); - cx23885_call_i2c_clients(&dev->i2c_bus[0], VIDIOC_LOG_STATUS, - NULL); - cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_LOG_STATUS, - NULL); - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_LOG_STATUS, - NULL); + call_all(dev, core, log_status); cx2341x_log_status(&dev->mpeg_params, name); printk(KERN_INFO "%s/2: ============= END LOG STATUS =============\n", diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index caa098beeec..5e4b7e790d9 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -27,6 +27,7 @@ #include "cx23885.h" #include "tuner-xc2028.h" +#include "netup-init.h" /* ------------------------------------------------------------------ */ /* board config info */ @@ -162,6 +163,24 @@ struct cx23885_board cx23885_boards[] = { .name = "Compro VideoMate E650F", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_TBS_6920] = { + .name = "TurboSight TBS 6920", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_TEVII_S470] = { + .name = "TeVii S470", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_DVBWORLD_2005] = { + .name = "DVBWorld DVB-S2 2005", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = { + .cimax = 1, + .name = "NetUP Dual DVB-S2 CI", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -245,6 +264,22 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x185b, .subdevice = 0xe800, .card = CX23885_BOARD_COMPRO_VIDEOMATE_E650F, + }, { + .subvendor = 0x6920, + .subdevice = 0x8888, + .card = CX23885_BOARD_TBS_6920, + }, { + .subvendor = 0xd470, + .subdevice = 0x9022, + .card = CX23885_BOARD_TEVII_S470, + }, { + .subvendor = 0x0001, + .subdevice = 0x2005, + .card = CX23885_BOARD_DVBWORLD_2005, + }, { + .subvendor = 0x1b55, + .subdevice = 0x2a2c, + .card = CX23885_BOARD_NETUP_DUAL_DVBS2_CI, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -552,6 +587,38 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(20); cx_set(GP0_IO, 0x00040004); break; + case CX23885_BOARD_TBS_6920: + case CX23885_BOARD_TEVII_S470: + cx_write(MC417_CTL, 0x00000036); + cx_write(MC417_OEN, 0x00001000); + cx_write(MC417_RWD, 0x00001800); + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + /* GPIO-0 INTA from CiMax1 + GPIO-1 INTB from CiMax2 + GPIO-2 reset chips + GPIO-3 to GPIO-10 data/addr for CA + GPIO-11 ~CS0 to CiMax1 + GPIO-12 ~CS1 to CiMax2 + GPIO-13 ADL0 load LSB addr + GPIO-14 ADL1 load MSB addr + GPIO-15 ~RDY from CiMax + GPIO-17 ~RD to CiMax + GPIO-18 ~WR to CiMax + */ + cx_set(GP0_IO, 0x00040000); /* GPIO as out */ + /* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */ + cx_clear(GP0_IO, 0x00030004); + mdelay(100);/* reset delay */ + cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */ + cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */ + /* GPIO-15 IN as ~ACK, rest as OUT */ + cx_write(MC417_OEN, 0x00001000); + /* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */ + cx_write(MC417_RWD, 0x0000c300); + /* enable irq */ + cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ + break; } } @@ -632,6 +699,21 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_TBS_6920: + case CX23885_BOARD_DVBWORLD_2005: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: @@ -656,7 +738,17 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: - request_module("cx25840"); + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->i2c_bus[2].i2c_adap, + "cx25840", "cx25840", 0x88 >> 1); + v4l2_subdev_call(dev->sd_cx25840, core, init, 0); + break; + } + + /* AUX-PLL 27MHz CLK */ + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + netup_initialize(dev); break; } } diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 8f6fb2add7d..dc7fff22cfd 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -31,6 +31,7 @@ #include <asm/div64.h> #include "cx23885.h" +#include "cimax2.h" MODULE_DESCRIPTION("Driver for cx23885 based TV cards"); MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); @@ -791,6 +792,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) dev->pci_bus = dev->pci->bus->number; dev->pci_slot = PCI_SLOT(dev->pci->devfn); dev->pci_irqmask = 0x001f00; + if (cx23885_boards[dev->board].cimax > 0) + dev->pci_irqmask |= 0x01800000; /* for CiMaxes */ /* External Master 1 Bus */ dev->i2c_bus[0].nr = 0; @@ -872,7 +875,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_i2c_register(&dev->i2c_bus[1]); cx23885_i2c_register(&dev->i2c_bus[2]); cx23885_card_setup(dev); - cx23885_call_i2c_clients(&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL); + call_all(dev, core, s_standby, 0); cx23885_ir_init(dev); if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) { @@ -1643,7 +1646,9 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) (pci_status & PCI_MSK_VID_B) || (pci_status & PCI_MSK_VID_A) || (pci_status & PCI_MSK_AUD_INT) || - (pci_status & PCI_MSK_AUD_EXT)) { + (pci_status & PCI_MSK_AUD_EXT) || + (pci_status & PCI_MSK_GPIO0) || + (pci_status & PCI_MSK_GPIO1)) { if (pci_status & PCI_MSK_RISC_RD) dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", @@ -1685,8 +1690,20 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", PCI_MSK_AUD_EXT); + if (pci_status & PCI_MSK_GPIO0) + dprintk(7, " (PCI_MSK_GPIO0 0x%08x)\n", + PCI_MSK_GPIO0); + + if (pci_status & PCI_MSK_GPIO1) + dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n", + PCI_MSK_GPIO1); } + if (cx23885_boards[dev->board].cimax > 0 && + ((pci_status & PCI_MSK_GPIO0) || (pci_status & PCI_MSK_GPIO1))) + /* handled += cx23885_irq_gpio(dev, pci_status); */ + handled += netup_ci_slot_status(dev, pci_status); + if (ts1_status) { if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) handled += cx23885_irq_ts(ts1, ts1_status); @@ -1722,16 +1739,20 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev, if (NULL == dev) return -ENOMEM; + err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev); + if (err < 0) + goto fail_free; + /* pci init */ dev->pci = pci_dev; if (pci_enable_device(pci_dev)) { err = -EIO; - goto fail_free; + goto fail_unreg; } if (cx23885_dev_setup(dev) < 0) { err = -EINVAL; - goto fail_free; + goto fail_unreg; } /* print pci info */ @@ -1758,11 +1779,18 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev, goto fail_irq; } - pci_set_drvdata(pci_dev, dev); + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + cx_set(PCI_INT_MSK, 0x01800000); /* for NetUP */ + break; + } + return 0; fail_irq: cx23885_dev_unregister(dev); +fail_unreg: + v4l2_device_unregister(&dev->v4l2_dev); fail_free: kfree(dev); return err; @@ -1770,7 +1798,8 @@ fail_free: static void __devexit cx23885_finidev(struct pci_dev *pci_dev) { - struct cx23885_dev *dev = pci_get_drvdata(pci_dev); + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct cx23885_dev *dev = to_cx23885(v4l2_dev); cx23885_shutdown(dev); @@ -1778,13 +1807,13 @@ static void __devexit cx23885_finidev(struct pci_dev *pci_dev) /* unregister stuff */ free_irq(pci_dev->irq, dev); - pci_set_drvdata(pci_dev, NULL); mutex_lock(&devlist); list_del(&dev->devlist); mutex_unlock(&devlist); cx23885_dev_unregister(dev); + v4l2_device_unregister(v4l2_dev); kfree(dev); } diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 1c454128a9d..d43c7439676 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -30,6 +30,7 @@ #include "cx23885.h" #include <media/v4l2-common.h> +#include "dvb_ca_en50221.h" #include "s5h1409.h" #include "s5h1411.h" #include "mt2131.h" @@ -43,6 +44,13 @@ #include "dib7000p.h" #include "dibx000_common.h" #include "zl10353.h" +#include "stv0900.h" +#include "stv6110.h" +#include "lnbh24.h" +#include "cx24116.h" +#include "cimax2.h" +#include "netup-eeprom.h" +#include "netup-init.h" static unsigned int debug; @@ -308,11 +316,63 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = { .no_tuner = 1, }; +static struct stv0900_config netup_stv0900_config = { + .demod_address = 0x68, + .xtal = 27000000, + .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ + .diseqc_mode = 2,/* 2/3 PWM */ + .path1_mode = 2,/*Serial continues clock */ + .path2_mode = 2,/*Serial continues clock */ + .tun1_maddress = 0,/* 0x60 */ + .tun2_maddress = 3,/* 0x63 */ + .tun1_adc = 1,/* 1 Vpp */ + .tun2_adc = 1,/* 1 Vpp */ +}; + +static struct stv6110_config netup_stv6110_tunerconfig_a = { + .i2c_address = 0x60, + .mclk = 27000000, + .iq_wiring = 0, +}; + +static struct stv6110_config netup_stv6110_tunerconfig_b = { + .i2c_address = 0x63, + .mclk = 27000000, + .iq_wiring = 1, +}; + +static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + if (voltage == SEC_VOLTAGE_18) + cx_write(MC417_RWD, 0x00001e00);/* GPIO-13 high */ + else if (voltage == SEC_VOLTAGE_13) + cx_write(MC417_RWD, 0x00001a00);/* GPIO-13 low */ + else + cx_write(MC417_RWD, 0x00001800);/* GPIO-12 low */ + return 0; +} + +static struct cx24116_config tbs_cx24116_config = { + .demod_address = 0x05, +}; + +static struct cx24116_config tevii_cx24116_config = { + .demod_address = 0x55, +}; + +static struct cx24116_config dvbworld_cx24116_config = { + .demod_address = 0x05, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; struct cx23885_i2c *i2c_bus = NULL; struct videobuf_dvb_frontend *fe0; + int ret; /* Get the first frontend */ fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); @@ -526,6 +586,78 @@ static int dvb_register(struct cx23885_tsport *port) fe->ops.tuner_ops.set_config(fe, &ctl); } break; + case CX23885_BOARD_TBS_6920: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &tbs_cx24116_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage; + + break; + case CX23885_BOARD_TEVII_S470: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &tevii_cx24116_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage; + + break; + case CX23885_BOARD_DVBWORLD_2005: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &dvbworld_cx24116_config, + &i2c_bus->i2c_adap); + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + i2c_bus = &dev->i2c_bus[0]; + switch (port->nr) { + /* port B */ + case 1: + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &netup_stv0900_config, + &i2c_bus->i2c_adap, 0); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(stv6110_attach, + fe0->dvb.frontend, + &netup_stv6110_tunerconfig_a, + &i2c_bus->i2c_adap)) { + if (!dvb_attach(lnbh24_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + LNBH24_PCL, 0, 0x09)) + printk(KERN_ERR + "No LNBH24 found!\n"); + + } + } + break; + /* port C */ + case 2: + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &netup_stv0900_config, + &i2c_bus->i2c_adap, 1); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(stv6110_attach, + fe0->dvb.frontend, + &netup_stv6110_tunerconfig_b, + &i2c_bus->i2c_adap)) { + if (!dvb_attach(lnbh24_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + LNBH24_PCL, 0, 0x0a)) + printk(KERN_ERR + "No LNBH24 found!\n"); + + } + } + break; + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", @@ -541,15 +673,39 @@ static int dvb_register(struct cx23885_tsport *port) fe0->dvb.frontend->callback = cx23885_tuner_callback; /* Put the analog decoder in standby to keep it quiet */ - cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL); + call_all(dev, core, s_standby, 0); if (fe0->dvb.frontend->ops.analog_ops.standby) fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend); /* register everything */ - return videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, + ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, &dev->pci->dev, adapter_nr, 0); + /* init CI & MAC */ + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: { + static struct netup_card_info cinfo; + + netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); + memcpy(port->frontends.adapter.proposed_mac, + cinfo.port[port->nr - 1].mac, 6); + printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=" + "%02X:%02X:%02X:%02X:%02X:%02X\n", + port->nr, + port->frontends.adapter.proposed_mac[0], + port->frontends.adapter.proposed_mac[1], + port->frontends.adapter.proposed_mac[2], + port->frontends.adapter.proposed_mac[3], + port->frontends.adapter.proposed_mac[4], + port->frontends.adapter.proposed_mac[5]); + + netup_ci_init(port); + break; + } + } + + return ret; } int cx23885_dvb_register(struct cx23885_tsport *port) @@ -622,6 +778,12 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port) if (fe0->dvb.frontend) videobuf_dvb_unregister_bus(&port->frontends); + switch (port->dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + netup_ci_exit(port); + break; + } + return 0; } diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index bb7f71a1fcb..3421bd12056 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -268,64 +268,6 @@ static int i2c_xfer(struct i2c_adapter *i2c_adap, return retval; } -static int attach_inform(struct i2c_client *client) -{ - struct cx23885_i2c *bus = i2c_get_adapdata(client->adapter); - struct cx23885_dev *dev = bus->dev; - struct tuner_setup tun_setup; - - dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n", - client->driver->driver.name, client->addr, client->name); - - if (!client->driver->command) - return 0; - - if (dev->tuner_type != UNSET) { - - dprintk(1, "%s (tuner) i2c attach [addr=0x%x,client=%s]\n", - client->driver->driver.name, client->addr, - client->name); - - if ((dev->tuner_addr == ADDR_UNSET) || - (dev->tuner_addr == client->addr)) { - - dprintk(1, "%s (tuner || addr UNSET)\n", - client->driver->driver.name); - - dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n", - client->driver->driver.name, - client->addr, client->name); - - tun_setup.mode_mask = T_ANALOG_TV; - tun_setup.type = dev->tuner_type; - tun_setup.addr = dev->tuner_addr; - - client->driver->command(client, TUNER_SET_TYPE_ADDR, - &tun_setup); - } - } - - return 0; -} - -static int detach_inform(struct i2c_client *client) -{ - struct cx23885_dev *dev = i2c_get_adapdata(client->adapter); - - dprintk(1, "i2c detach [client=%s]\n", client->name); - - return 0; -} - -void cx23885_call_i2c_clients(struct cx23885_i2c *bus, - unsigned int cmd, void *arg) -{ - if (bus->i2c_rc != 0) - return; - - i2c_clients_command(&bus->i2c_adap, cmd, arg); -} - static u32 cx23885_functionality(struct i2c_adapter *adap) { return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; @@ -343,9 +285,6 @@ static struct i2c_adapter cx23885_i2c_adap_template = { .owner = THIS_MODULE, .id = I2C_HW_B_CX23885, .algo = &cx23885_i2c_algo_template, - .class = I2C_CLASS_TV_ANALOG, - .client_register = attach_inform, - .client_unregister = detach_inform, }; static struct i2c_client cx23885_i2c_client_template = { @@ -402,15 +341,18 @@ int cx23885_i2c_register(struct cx23885_i2c *bus) bus->i2c_algo.data = bus; bus->i2c_adap.algo_data = bus; - i2c_set_adapdata(&bus->i2c_adap, bus); + i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev); i2c_add_adapter(&bus->i2c_adap); bus->i2c_client.adapter = &bus->i2c_adap; if (0 == bus->i2c_rc) { dprintk(1, "%s: i2c bus %d registered\n", dev->name, bus->nr); - if (i2c_scan) + if (i2c_scan) { + printk(KERN_INFO "%s: scan bus %d:\n", + dev->name, bus->nr); do_i2c_scan(dev->name, &bus->i2c_client); + } } else printk(KERN_WARNING "%s: i2c bus %d register FAILED\n", dev->name, bus->nr); diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h index 20b68a23626..eafbe5226ba 100644 --- a/drivers/media/video/cx23885/cx23885-reg.h +++ b/drivers/media/video/cx23885/cx23885-reg.h @@ -212,6 +212,8 @@ Channel manager Data Structure entry = 20 DWORD #define DEV_CNTRL2 0x00040000 +#define PCI_MSK_GPIO1 (1 << 24) +#define PCI_MSK_GPIO0 (1 << 23) #define PCI_MSK_APB_DMA (1 << 12) #define PCI_MSK_AL_WR (1 << 11) #define PCI_MSK_AL_RD (1 << 10) diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index eaa11893bfe..f0ac62c5dc8 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -35,11 +35,6 @@ #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> -#ifdef CONFIG_VIDEO_V4L1_COMPAT -/* Include V4L1 specific functions. Should be removed soon */ -#include <linux/videodev.h> -#endif - MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards"); MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); MODULE_LICENSE("GPL"); @@ -244,6 +239,7 @@ static struct cx23885_ctrl cx23885_ctls[] = { }; static const int CX23885_CTLS = ARRAY_SIZE(cx23885_ctls); +/* Must be sorted from low to high control ID! */ static const u32 cx23885_user_ctrls[] = { V4L2_CID_USER_CLASS, V4L2_CID_BRIGHTNESS, @@ -303,11 +299,7 @@ static int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) dev->tvnorm = norm; - /* Tell the analog tuner/demods */ - cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_S_STD, &norm); - - /* Tell the internal A/V decoder */ - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_STD, &norm); + call_all(dev, tuner, s_std, norm); return 0; } @@ -324,8 +316,8 @@ static struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, if (NULL == vfd) return NULL; *vfd = *template; - vfd->minor = -1; - vfd->parent = &pci->dev; + vfd->minor = -1; + vfd->v4l2_dev = &dev->v4l2_dev; vfd->release = video_device_release; snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, type, cx23885_boards[dev->board].name); @@ -414,8 +406,7 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) route.input = INPUT(input)->vmux; /* Tell the internal A/V decoder */ - cx23885_call_i2c_clients(&dev->i2c_bus[2], - VIDIOC_INT_S_VIDEO_ROUTING, &route); + v4l2_subdev_call(dev->sd_cx25840, video, s_routing, &route); return 0; } @@ -891,7 +882,7 @@ static int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl) { dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__); - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_CTRL, ctl); + call_all(dev, core, g_ctrl, ctl); return 0; } @@ -1005,7 +996,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->vidq.field = f->fmt.pix.field; dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width, fh->height, fh->vidq.field); - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_FMT, f); + call_all(dev, video, s_fmt, f); return 0; } @@ -1285,7 +1276,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; f->frequency = dev->freq; - cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_G_FREQUENCY, f); + call_all(dev, tuner, g_frequency, f); return 0; } @@ -1300,7 +1291,7 @@ static int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f) mutex_lock(&dev->lock); dev->freq = f->frequency; - cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_S_FREQUENCY, f); + call_all(dev, tuner, s_frequency, f); /* When changing channels it is required to reset TVAUDIO */ msleep(10); @@ -1334,7 +1325,7 @@ static int vidioc_g_register(struct file *file, void *fh, if (!v4l2_chip_match_host(®->match)) return -EINVAL; - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_DBG_G_REGISTER, reg); + call_all(dev, core, g_register, reg); return 0; } @@ -1347,7 +1338,7 @@ static int vidioc_s_register(struct file *file, void *fh, if (!v4l2_chip_match_host(®->match)) return -EINVAL; - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_DBG_S_REGISTER, reg); + call_all(dev, core, s_register, reg); return 0; } @@ -1528,6 +1519,26 @@ int cx23885_video_register(struct cx23885_dev *dev) /* Don't enable VBI yet */ cx_set(PCI_INT_MSK, 1); + if (TUNER_ABSENT != dev->tuner_type) { + struct v4l2_subdev *sd = NULL; + + if (dev->tuner_addr) + sd = v4l2_i2c_new_subdev(&dev->i2c_bus[1].i2c_adap, + "tuner", "tuner", dev->tuner_addr); + else + sd = v4l2_i2c_new_probed_subdev(&dev->i2c_bus[1].i2c_adap, + "tuner", "tuner", v4l2_i2c_tuner_addrs(ADDRS_TV)); + if (sd) { + struct tuner_setup tun_setup; + + tun_setup.mode_mask = T_ANALOG_TV; + tun_setup.type = dev->tuner_type; + tun_setup.addr = v4l2_i2c_subdev_addr(sd); + + v4l2_subdev_call(sd, tuner, s_type_addr, &tun_setup); + } + } + /* register v4l devices */ dev->video_dev = cx23885_vdev_init(dev, dev->pci, diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 67828029fc6..02d980a2996 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -24,7 +24,7 @@ #include <linux/i2c-algo-bit.h> #include <linux/kdev_t.h> -#include <media/v4l2-common.h> +#include <media/v4l2-device.h> #include <media/tuner.h> #include <media/tveeprom.h> #include <media/videobuf-dma-sg.h> @@ -67,6 +67,10 @@ #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11 #define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12 #define CX23885_BOARD_COMPRO_VIDEOMATE_E650F 13 +#define CX23885_BOARD_TBS_6920 14 +#define CX23885_BOARD_TEVII_S470 15 +#define CX23885_BOARD_DVBWORLD_2005 16 +#define CX23885_BOARD_NETUP_DUAL_DVBS2_CI 17 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ @@ -184,6 +188,7 @@ struct cx23885_board { */ u32 clk_freq; struct cx23885_input input[MAX_CX23885_INPUT]; + int cimax; /* for NetUP */ }; struct cx23885_subid { @@ -266,11 +271,13 @@ struct cx23885_tsport { /* Allow a single tsport to have multiple frontends */ u32 num_frontends; + void *port_priv; }; struct cx23885_dev { struct list_head devlist; atomic_t refcount; + struct v4l2_device v4l2_dev; /* pci stuff */ struct pci_dev *pci; @@ -316,6 +323,7 @@ struct cx23885_dev { unsigned int radio_type; unsigned char radio_addr; unsigned int has_radio; + struct v4l2_subdev *sd_cx25840; /* V4l */ u32 freq; @@ -336,6 +344,14 @@ struct cx23885_dev { }; +static inline struct cx23885_dev *to_cx23885(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct cx23885_dev, v4l2_dev); +} + +#define call_all(dev, o, f, args...) \ + v4l2_device_call_all(&dev->v4l2_dev, 0, o, f, ##args) + extern struct list_head cx23885_devlist; #define SRAM_CH01 0 /* Video A */ @@ -452,8 +468,6 @@ extern struct videobuf_queue_ops cx23885_vbi_qops; /* cx23885-i2c.c */ extern int cx23885_i2c_register(struct cx23885_i2c *bus); extern int cx23885_i2c_unregister(struct cx23885_i2c *bus); -extern void cx23885_call_i2c_clients(struct cx23885_i2c *bus, unsigned int cmd, - void *arg); extern void cx23885_av_clk(struct cx23885_dev *dev, int enable); /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/cx23885/netup-eeprom.c b/drivers/media/video/cx23885/netup-eeprom.c new file mode 100644 index 00000000000..042bbbbd48f --- /dev/null +++ b/drivers/media/video/cx23885/netup-eeprom.c @@ -0,0 +1,107 @@ + +/* + * netup-eeprom.c + * + * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +# +#include "cx23885.h" +#include "netup-eeprom.h" + +#define EEPROM_I2C_ADDR 0x50 + +int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr) +{ + int ret; + unsigned char buf[2]; + + /* Read from EEPROM */ + struct i2c_msg msg[] = { + { + .addr = EEPROM_I2C_ADDR, + .flags = 0, + .buf = &buf[0], + .len = 1 + }, { + .addr = EEPROM_I2C_ADDR, + .flags = I2C_M_RD, + .buf = &buf[1], + .len = 1 + } + + }; + + buf[0] = addr; + buf[1] = 0x0; + + ret = i2c_transfer(i2c_adap, msg, 2); + + if (ret != 2) { + printk(KERN_ERR "eeprom i2c read error, status=%d\n", ret); + return -1; + } + + return buf[1]; +}; + +int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data) +{ + int ret; + unsigned char bufw[2]; + + /* Write into EEPROM */ + struct i2c_msg msg[] = { + { + .addr = EEPROM_I2C_ADDR, + .flags = 0, + .buf = &bufw[0], + .len = 2 + } + }; + + bufw[0] = addr; + bufw[1] = data; + + ret = i2c_transfer(i2c_adap, msg, 1); + + if (ret != 1) { + printk(KERN_ERR "eeprom i2c write error, status=%d\n", ret); + return -1; + } + + mdelay(10); /* prophylactic delay, datasheet write cycle time = 5 ms */ + return 0; +}; + +void netup_get_card_info(struct i2c_adapter *i2c_adap, + struct netup_card_info *cinfo) +{ + int i, j; + + cinfo->rev = netup_eeprom_read(i2c_adap, 13); + + for (i = 0, j = 0; i < 6; i++, j++) + cinfo->port[0].mac[j] = netup_eeprom_read(i2c_adap, i); + + for (i = 6, j = 0; i < 12; i++, j++) + cinfo->port[1].mac[j] = netup_eeprom_read(i2c_adap, i); +}; diff --git a/drivers/media/video/cx23885/netup-eeprom.h b/drivers/media/video/cx23885/netup-eeprom.h new file mode 100644 index 00000000000..13926e18feb --- /dev/null +++ b/drivers/media/video/cx23885/netup-eeprom.h @@ -0,0 +1,42 @@ +/* + * netup-eeprom.h + * + * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef NETUP_EEPROM_H +#define NETUP_EEPROM_H + +struct netup_port_info { + u8 mac[6];/* card MAC address */ +}; + +struct netup_card_info { + struct netup_port_info port[2];/* ports - 1,2 */ + u8 rev;/* card revision */ +}; + +extern int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr); +extern int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data); +extern void netup_get_card_info(struct i2c_adapter *i2c_adap, + struct netup_card_info *cinfo); + +#endif diff --git a/drivers/media/video/cx23885/netup-init.c b/drivers/media/video/cx23885/netup-init.c new file mode 100644 index 00000000000..f4893e69cd8 --- /dev/null +++ b/drivers/media/video/cx23885/netup-init.c @@ -0,0 +1,125 @@ +/* + * netup-init.c + * + * NetUP Dual DVB-S2 CI driver + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru> + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" + +static void i2c_av_write(struct i2c_adapter *i2c, u16 reg, u8 val) +{ + int ret; + u8 buf[3]; + struct i2c_msg msg = { + .addr = 0x88 >> 1, + .flags = 0, + .buf = buf, + .len = 3 + }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + buf[2] = val; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); +} + +static void i2c_av_write4(struct i2c_adapter *i2c, u16 reg, u32 val) +{ + int ret; + u8 buf[6]; + struct i2c_msg msg = { + .addr = 0x88 >> 1, + .flags = 0, + .buf = buf, + .len = 6 + }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + buf[2] = val & 0xff; + buf[3] = (val >> 8) & 0xff; + buf[4] = (val >> 16) & 0xff; + buf[5] = val >> 24; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); +} + +static u8 i2c_av_read(struct i2c_adapter *i2c, u16 reg) +{ + int ret; + u8 buf[2]; + struct i2c_msg msg = { + .addr = 0x88 >> 1, + .flags = 0, + .buf = buf, + .len = 2 + }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); + + msg.flags = I2C_M_RD; + msg.len = 1; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c read error!\n", __func__); + + return buf[0]; +} + +static void i2c_av_and_or(struct i2c_adapter *i2c, u16 reg, unsigned and_mask, + u8 or_value) +{ + i2c_av_write(i2c, reg, (i2c_av_read(i2c, reg) & and_mask) | or_value); +} +/* set 27MHz on AUX_CLK */ +void netup_initialize(struct cx23885_dev *dev) +{ + struct cx23885_i2c *i2c_bus = &dev->i2c_bus[2]; + struct i2c_adapter *i2c = &i2c_bus->i2c_adap; + + /* Stop microcontroller */ + i2c_av_and_or(i2c, 0x803, ~0x10, 0x00); + + /* Aux PLL frac for 27 MHz */ + i2c_av_write4(i2c, 0x114, 0xea0eb3); + + /* Aux PLL int for 27 MHz */ + i2c_av_write4(i2c, 0x110, 0x090319); + + /* start microcontroller */ + i2c_av_and_or(i2c, 0x803, ~0x10, 0x10); +} diff --git a/drivers/media/video/cx23885/netup-init.h b/drivers/media/video/cx23885/netup-init.h new file mode 100644 index 00000000000..d26ae4b1590 --- /dev/null +++ b/drivers/media/video/cx23885/netup-init.h @@ -0,0 +1,25 @@ +/* + * netup-init.h + * + * NetUP Dual DVB-S2 CI driver + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru> + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +extern void netup_initialize(struct cx23885_dev *dev); |