diff options
Diffstat (limited to 'drivers/media/video/cx88/cx88-dvb.c')
| -rw-r--r-- | drivers/media/video/cx88/cx88-dvb.c | 47 |
1 files changed, 44 insertions, 3 deletions
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 78d223257a6..cc71cafc2cb 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -1,5 +1,4 @@ /* - * $Id: cx88-dvb.c,v 1.58 2005/08/07 09:24:08 mkrufky Exp $ * * device driver for Conexant 2388x based TV cards * MPEG Transport Stream (DVB) routines @@ -31,6 +30,7 @@ #include <linux/suspend.h> #include <linux/config.h> + #include "cx88.h" #include "dvb-pll.h" @@ -210,16 +210,26 @@ static struct or51132_config pchdtv_hd3000 = { static int lgdt330x_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { + /* FIXME make this routine use the tuner-simple code. + * It could probably be shared with a number of ATSC + * frontends. Many share the same tuner with analog TV. */ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; u8 buf[4]; struct i2c_msg msg = { .addr = dev->core->pll_addr, .flags = 0, .buf = buf, .len = 4 }; int err; - dvb_pll_configure(dev->core->pll_desc, buf, params->frequency, 0); + /* Put the analog decoder in standby to keep it quiet */ + if (core->tda9887_conf) { + cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); + } + + dvb_pll_configure(core->pll_desc, buf, params->frequency, 0); dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n", __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]); - if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) { + if ((err = i2c_transfer(&core->i2c_adap, &msg, 1)) != 1) { printk(KERN_WARNING "cx88-dvb: %s error " "(addr %02x <- %02x, err = %i)\n", __FUNCTION__, buf[0], buf[1], err); @@ -228,6 +238,13 @@ static int lgdt330x_pll_set(struct dvb_frontend* fe, else return -EREMOTEIO; } + if (core->tuner_type == TUNER_LG_TDVS_H062F) { + /* Set the Auxiliary Byte. */ + buf[2] &= ~0x20; + buf[2] |= 0x18; + buf[3] = 0x50; + i2c_transfer(&core->i2c_adap, &msg, 1); + } return 0; } @@ -261,6 +278,14 @@ static struct lgdt330x_config fusionhdtv_3_gold = { .pll_set = lgdt330x_pll_set, .set_ts_params = lgdt330x_set_ts_param, }; + +static struct lgdt330x_config fusionhdtv_5_gold = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */ + .pll_set = lgdt330x_pll_set, + .set_ts_params = lgdt330x_set_ts_param, +}; #endif static int dvb_register(struct cx8802_dev *dev) @@ -346,6 +371,22 @@ static int dvb_register(struct cx8802_dev *dev) &dev->core->i2c_adap); } break; + case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD: + dev->ts_gen_cntrl = 0x08; + { + /* Do a hardware reset of chip before using it. */ + struct cx88_core *core = dev->core; + + cx_clear(MO_GP0_IO, 1); + mdelay(100); + cx_set(MO_GP0_IO, 1); + mdelay(200); + dev->core->pll_addr = 0x61; + dev->core->pll_desc = &dvb_pll_tdvs_tua6034; + dev->dvb.frontend = lgdt330x_attach(&fusionhdtv_5_gold, + &dev->core->i2c_adap); + } + break; #endif default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", |