diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
-rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 280 |
1 files changed, 169 insertions, 111 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 9b747c266af..4561cd89938 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -336,6 +336,23 @@ static struct em28xx_reg_seq pctv_460e[] = { { -1, -1, -1, -1}, }; +#if 0 +static struct em28xx_reg_seq hauppauge_930c_gpio[] = { + {EM2874_R80_GPIO, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */ + {EM2874_R80_GPIO, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO, 0x4f, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq hauppauge_930c_digital[] = { + {EM2874_R80_GPIO, 0xf6, 0xff, 10}, + {EM2874_R80_GPIO, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO, 0xa6, 0xff, 10}, + { -1, -1, -1, -1}, +}; +#endif + /* * Board definitions */ @@ -839,6 +856,10 @@ struct em28xx_board em28xx_boards[] = { [EM2870_BOARD_KWORLD_355U] = { .name = "Kworld 355 U DVB-T", .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = default_tuner_gpio, + .has_dvb = 1, + .dvb_gpio = default_digital, }, [EM2870_BOARD_PINNACLE_PCTV_DVB] = { .name = "Pinnacle PCTV DVB-T", @@ -887,6 +908,37 @@ struct em28xx_board em28xx_boards[] = { .tuner_addr = 0x41, .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ .tuner_gpio = terratec_h5_gpio, +#else + .tuner_type = TUNER_ABSENT, +#endif + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { + .name = "Hauppauge WinTV HVR 930C", + .has_dvb = 1, +#if 0 /* FIXME: Add analog support */ + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x41, + .dvb_gpio = hauppauge_930c_digital, + .tuner_gpio = hauppauge_930c_gpio, +#else + .tuner_type = TUNER_ABSENT, +#endif + .ir_codes = RC_MAP_HAUPPAUGE, + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + [EM2884_BOARD_CINERGY_HTC_STICK] = { + .name = "Terratec Cinergy HTC Stick", + .has_dvb = 1, +#if 0 + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x41, + .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ + .tuner_gpio = terratec_h5_gpio, #endif .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | EM28XX_I2C_CLK_WAIT_ENABLE | @@ -1127,7 +1179,7 @@ struct em28xx_board em28xx_boards[] = { .name = "Terratec Cinergy 200 USB", .is_em2800 = 1, .has_ir_i2c = 1, - .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tuner_type = TUNER_LG_TALN, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { @@ -1218,7 +1270,7 @@ struct em28xx_board em28xx_boards[] = { }, [EM2820_BOARD_PINNACLE_DVC_90] = { .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " - "/ Kworld DVD Maker 2", + "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", .tuner_type = TUNER_ABSENT, /* capture only board */ .decoder = EM28XX_SAA711X, .input = { { @@ -1840,6 +1892,22 @@ struct em28xx_board em28xx_boards[] = { .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, + /* eb1a:5006 Honestech VIDBOX NW03 + * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ + [EM2860_BOARD_HT_VIDBOX_NW03] = { + .name = "Honestech Vidbox NW03", + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1899,6 +1967,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, { USB_DEVICE(0xeb1a, 0xe357), .driver_info = EM2870_BOARD_KWORLD_355U }, + { USB_DEVICE(0xeb1a, 0xe359), + .driver_info = EM2870_BOARD_KWORLD_355U }, { USB_DEVICE(0x1b80, 0xe302), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ { USB_DEVICE(0x1b80, 0xe304), @@ -1914,17 +1984,23 @@ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0x0ccd, 0x0042), .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x0043), + .driver_info = EM2870_BOARD_TERRATEC_XS }, + { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ + .driver_info = EM2884_BOARD_TERRATEC_H5 }, + { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ + .driver_info = EM2884_BOARD_TERRATEC_H5 }, + { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, - { USB_DEVICE(0x0ccd, 0x10a2), /* Rev. 1 */ + { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, - { USB_DEVICE(0x0ccd, 0x10ad), /* Rev. 2 */ - .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS }, { USB_DEVICE(0x0ccd, 0x0084), .driver_info = EM2860_BOARD_TERRATEC_AV350 }, { USB_DEVICE(0x0ccd, 0x0096), .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, { USB_DEVICE(0x0ccd, 0x10AF), .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, + { USB_DEVICE(0x0ccd, 0x00b2), + .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, { USB_DEVICE(0x0fd9, 0x0033), .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE}, { USB_DEVICE(0x185b, 0x2870), @@ -1963,6 +2039,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, { USB_DEVICE(0x0413, 0x6023), .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, + { USB_DEVICE(0x093b, 0xa003), + .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x093b, 0xa005), .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, { USB_DEVICE(0x04bb, 0x0515), @@ -1975,6 +2053,12 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM28174_BOARD_PCTV_290E }, { USB_DEVICE(0x2013, 0x024c), .driver_info = EM28174_BOARD_PCTV_460E }, + { USB_DEVICE(0x2040, 0x1605), + .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, + { USB_DEVICE(0xeb1a, 0x5006), + .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, + { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ + .driver_info = EM2860_BOARD_EASYCAP }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -2028,10 +2112,10 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg) int rc = 0; struct em28xx *dev = ptr; - if (dev->tuner_type != TUNER_XC2028) + if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) return 0; - if (command != XC2028_TUNER_RESET) + if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) return 0; rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); @@ -2203,7 +2287,8 @@ void em28xx_pre_card_setup(struct em28xx *dev) /* Set the initial XCLK and I2C clock values based on the board definition */ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); - em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); + if (!dev->board.is_em2800) + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); msleep(50); /* request some modules */ @@ -2832,11 +2917,10 @@ void em28xx_release_resources(struct em28xx *dev) * em28xx_init_dev() * allocates and inits the device structs, registers i2c bus and v4l device */ -static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, +static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, struct usb_interface *interface, int minor) { - struct em28xx *dev = *devhandle; int retval; dev->udev = udev; @@ -2931,7 +3015,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, if (!dev->board.is_em2800) { /* Resets I2C speed */ - em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); + retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); if (retval < 0) { em28xx_errdev("%s: em28xx_write_reg failed!" " retval [%d]\n", @@ -3031,12 +3115,11 @@ unregister_dev: static int em28xx_usb_probe(struct usb_interface *interface, const struct usb_device_id *id) { - const struct usb_endpoint_descriptor *endpoint; struct usb_device *udev; struct em28xx *dev = NULL; int retval; - bool is_audio_only = false, has_audio = false; - int i, nr, isoc_pipe; + bool has_audio = false, has_video = false, has_dvb = false; + int i, nr; const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; char *speed; char descr[255] = ""; @@ -3068,54 +3151,65 @@ static int em28xx_usb_probe(struct usb_interface *interface, goto err; } + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + em28xx_err(DRIVER_NAME ": out of memory!\n"); + retval = -ENOMEM; + goto err; + } + + /* compute alternate max packet sizes */ + dev->alt_max_pkt_size = kmalloc(sizeof(dev->alt_max_pkt_size[0]) * + interface->num_altsetting, GFP_KERNEL); + if (dev->alt_max_pkt_size == NULL) { + em28xx_errdev("out of memory!\n"); + kfree(dev); + retval = -ENOMEM; + goto err; + } + /* Get endpoints */ for (i = 0; i < interface->num_altsetting; i++) { int ep; for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { - struct usb_host_endpoint *e; - e = &interface->altsetting[i].endpoint[ep]; - - if (e->desc.bEndpointAddress == 0x83) - has_audio = true; + const struct usb_endpoint_descriptor *e; + int sizedescr, size; + + e = &interface->altsetting[i].endpoint[ep].desc; + + sizedescr = le16_to_cpu(e->wMaxPacketSize); + size = sizedescr & 0x7ff; + + if (udev->speed == USB_SPEED_HIGH) + size = size * hb_mult(sizedescr); + + if (usb_endpoint_xfer_isoc(e) && + usb_endpoint_dir_in(e)) { + switch (e->bEndpointAddress) { + case EM28XX_EP_AUDIO: + has_audio = true; + break; + case EM28XX_EP_ANALOG: + has_video = true; + dev->alt_max_pkt_size[i] = size; + break; + case EM28XX_EP_DIGITAL: + has_dvb = true; + if (size > dev->dvb_max_pkt_size) { + dev->dvb_max_pkt_size = size; + dev->dvb_alt = i; + } + break; + } + } } } - endpoint = &interface->cur_altsetting->endpoint[0].desc; - - /* check if the device has the iso in endpoint at the correct place */ - if (usb_endpoint_xfer_isoc(endpoint) - && - (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) { - /* It's a newer em2874/em2875 device */ - isoc_pipe = 0; - } else { - int check_interface = 1; - isoc_pipe = 1; - endpoint = &interface->cur_altsetting->endpoint[1].desc; - if (!usb_endpoint_xfer_isoc(endpoint)) - check_interface = 0; - - if (usb_endpoint_dir_out(endpoint)) - check_interface = 0; - - if (!check_interface) { - if (has_audio) { - is_audio_only = true; - } else { - em28xx_err(DRIVER_NAME " video device (%04x:%04x): " - "interface %i, class %i found.\n", - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct), - ifnum, - interface->altsetting[0].desc.bInterfaceClass); - em28xx_err(DRIVER_NAME " This is an anciliary " - "interface not used by the driver\n"); - - retval = -ENODEV; - goto err; - } - } + if (!(has_audio || has_video || has_dvb)) { + retval = -ENODEV; + goto err_free; } switch (udev->speed) { @@ -3141,6 +3235,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, strlcat(descr, " ", sizeof(descr)); strlcat(descr, udev->product, sizeof(descr)); } + if (*descr) strlcat(descr, " ", sizeof(descr)); @@ -3157,6 +3252,14 @@ static int em28xx_usb_probe(struct usb_interface *interface, printk(KERN_INFO DRIVER_NAME ": Audio Vendor Class interface %i found\n", ifnum); + if (has_video) + printk(KERN_INFO DRIVER_NAME + ": Video interface %i found\n", + ifnum); + if (has_dvb) + printk(KERN_INFO DRIVER_NAME + ": DVB interface %i found\n", + ifnum); /* * Make sure we have 480 Mbps of bandwidth, otherwise things like @@ -3168,22 +3271,14 @@ static int em28xx_usb_probe(struct usb_interface *interface, printk(DRIVER_NAME ": Device must be connected to a high-speed" " USB 2.0 port.\n"); retval = -ENODEV; - goto err; - } - - /* allocate memory for our device state and initialize it */ - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev == NULL) { - em28xx_err(DRIVER_NAME ": out of memory!\n"); - retval = -ENOMEM; - goto err; + goto err_free; } snprintf(dev->name, sizeof(dev->name), "em28xx #%d", nr); dev->devno = nr; dev->model = id->driver_info; dev->alt = -1; - dev->is_audio_only = is_audio_only; + dev->is_audio_only = has_audio && !(has_video || has_dvb); dev->has_alsa_audio = has_audio; dev->audio_ifnum = ifnum; @@ -3196,26 +3291,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, } } - /* compute alternate max packet sizes */ dev->num_alt = interface->num_altsetting; - dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL); - - if (dev->alt_max_pkt_size == NULL) { - em28xx_errdev("out of memory!\n"); - kfree(dev); - retval = -ENOMEM; - goto err; - } - - for (i = 0; i < dev->num_alt ; i++) { - u16 tmp = le16_to_cpu(interface->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize); - unsigned int size = tmp & 0x7ff; - - if (udev->speed == USB_SPEED_HIGH) - size = size * hb_mult(tmp); - - dev->alt_max_pkt_size[i] = size; - } if ((card[nr] >= 0) && (card[nr] < em28xx_bcount)) dev->model = card[nr]; @@ -3226,12 +3302,9 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* allocate device struct */ mutex_init(&dev->lock); mutex_lock(&dev->lock); - retval = em28xx_init_dev(&dev, udev, interface, nr); + retval = em28xx_init_dev(dev, udev, interface, nr); if (retval) { - mutex_unlock(&dev->lock); - kfree(dev->alt_max_pkt_size); - kfree(dev); - goto err; + goto unlock_and_free; } request_modules(dev); @@ -3250,6 +3323,13 @@ static int em28xx_usb_probe(struct usb_interface *interface, return 0; +unlock_and_free: + mutex_unlock(&dev->lock); + +err_free: + kfree(dev->alt_max_pkt_size); + kfree(dev); + err: clear_bit(nr, &em28xx_devused); @@ -3325,26 +3405,4 @@ static struct usb_driver em28xx_usb_driver = { .id_table = em28xx_id_table, }; -static int __init em28xx_module_init(void) -{ - int result; - - /* register this driver with the USB subsystem */ - result = usb_register(&em28xx_usb_driver); - if (result) - em28xx_err(DRIVER_NAME - " usb_register failed. Error number %d.\n", result); - - printk(KERN_INFO DRIVER_NAME " driver loaded\n"); - - return result; -} - -static void __exit em28xx_module_exit(void) -{ - /* deregister this driver with the USB subsystem */ - usb_deregister(&em28xx_usb_driver); -} - -module_init(em28xx_module_init); -module_exit(em28xx_module_exit); +module_usb_driver(em28xx_usb_driver); |