summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/em28xx/em28xx-cards.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
-rw-r--r--drivers/media/video/em28xx/em28xx-cards.c103
1 files changed, 86 insertions, 17 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index f7e9168157a..87f77a34eea 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -33,6 +33,7 @@
#include <media/saa7115.h>
#include <media/tvp5150.h>
#include <media/tvaudio.h>
+#include <media/mt9v011.h>
#include <media/i2c-addr.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
@@ -268,6 +269,20 @@ static struct em28xx_reg_seq dikom_dk300_digital[] = {
};
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq leadership_digital[] = {
+ {EM2874_R80_GPIO, 0x70, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq leadership_reset[] = {
+ {EM2874_R80_GPIO, 0xf0, 0xff, 10},
+ {EM2874_R80_GPIO, 0xb0, 0xff, 10},
+ {EM2874_R80_GPIO, 0xf0, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+
/*
* Board definitions
*/
@@ -1224,6 +1239,19 @@ struct em28xx_board em28xx_boards[] = {
.vmux = SAA7115_COMPOSITE0,
} },
},
+
+ [EM2874_LEADERSHIP_ISDBT] = {
+ .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
+ EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_100_KHZ,
+ .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
+ .name = "EM2874 Leadership ISDBT",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = leadership_reset,
+ .dvb_gpio = leadership_digital,
+ .has_dvb = 1,
+ },
+
[EM2880_BOARD_MSI_DIGIVOX_AD] = {
.name = "MSI DigiVox A/D",
.valid = EM28XX_BOARD_NOT_VALIDATED,
@@ -1469,7 +1497,7 @@ struct em28xx_board em28xx_boards[] = {
} },
},
[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
- .name = "Terratec Hybrid XS (em2882)",
+ .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
@@ -1633,11 +1661,11 @@ struct em28xx_board em28xx_boards[] = {
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = EM28XX_AMUX_VIDEO2,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = EM28XX_AMUX_VIDEO2,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_TERRATEC_AV350] = {
@@ -1754,6 +1782,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2868),
.driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2875),
+ .driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0xe300),
.driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
{ USB_DEVICE(0xeb1a, 0xe303),
@@ -1791,7 +1821,7 @@ struct usb_device_id em28xx_id_table[] = {
{ USB_DEVICE(0x0ccd, 0x005e),
.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x0042),
- .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
+ .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x0043),
.driver_info = EM2870_BOARD_TERRATEC_XS },
{ USB_DEVICE(0x0ccd, 0x0047),
@@ -1873,6 +1903,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
+ {0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT},
};
/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
@@ -1887,11 +1918,6 @@ static unsigned short tvp5150_addrs[] = {
I2C_CLIENT_END
};
-static unsigned short mt9v011_addrs[] = {
- 0xba >> 1,
- I2C_CLIENT_END
-};
-
static unsigned short msp3400_addrs[] = {
0x80 >> 1,
0x88 >> 1,
@@ -2407,8 +2433,9 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
dev->init_data.ir_codes = RC_MAP_RC5_HAUPPAUGE_NEW;
dev->init_data.get_key = em28xx_get_key_em_haup;
dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
+ break;
case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
- dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;;
+ dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
break;
@@ -2430,8 +2457,36 @@ void em28xx_card_setup(struct em28xx *dev)
dev->board.is_webcam = 0;
else
dev->progressive = 1;
- } else
- em28xx_set_model(dev);
+ }
+
+ if (!dev->board.is_webcam) {
+ switch (dev->model) {
+ case EM2820_BOARD_UNKNOWN:
+ case EM2800_BOARD_UNKNOWN:
+ /*
+ * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
+ *
+ * This occurs because they share identical USB vendor and
+ * product IDs.
+ *
+ * What we do here is look up the EEPROM hash of the K-WORLD
+ * and if it is found then we decide that we do not have
+ * a DIGIVOX and reset the device to the K-WORLD instead.
+ *
+ * This solution is only valid if they do not share eeprom
+ * hash identities which has not been determined as yet.
+ */
+ if (em28xx_hint_board(dev) < 0)
+ em28xx_errdev("Board not discovered\n");
+ else {
+ em28xx_set_model(dev);
+ em28xx_pre_card_setup(dev);
+ }
+ break;
+ default:
+ em28xx_set_model(dev);
+ }
+ }
em28xx_info("Identified as %s (card=%d)\n",
dev->board.name, dev->model);
@@ -2565,11 +2620,17 @@ void em28xx_card_setup(struct em28xx *dev)
"tvp5150", 0, tvp5150_addrs);
if (dev->em28xx_sensor == EM28XX_MT9V011) {
+ struct mt9v011_platform_data pdata;
+ struct i2c_board_info mt9v011_info = {
+ .type = "mt9v011",
+ .addr = 0xba >> 1,
+ .platform_data = &pdata,
+ };
struct v4l2_subdev *sd;
- sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, "mt9v011", 0, mt9v011_addrs);
- v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
+ pdata.xtal = dev->sensor_xtal;
+ sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
+ &mt9v011_info, NULL);
}
@@ -2632,8 +2693,14 @@ static void request_modules(struct em28xx *dev)
INIT_WORK(&dev->request_module_wk, request_module_async);
schedule_work(&dev->request_module_wk);
}
+
+static void flush_request_modules(struct em28xx *dev)
+{
+ flush_work_sync(&dev->request_module_wk);
+}
#else
#define request_modules(dev)
+#define flush_request_modules(dev)
#endif /* CONFIG_MODULES */
/*
@@ -2749,8 +2816,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
em28xx_pre_card_setup(dev);
if (!dev->board.is_em2800) {
- /* Sets I2C speed to 100 KHz */
- retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
+ /* Resets I2C speed */
+ em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
if (retval < 0) {
em28xx_errdev("%s: em28xx_write_regs_req failed!"
" retval [%d]\n",
@@ -3060,6 +3127,8 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
em28xx_info("disconnecting %s\n", dev->vdev->name);
+ flush_request_modules(dev);
+
/* wait until all current v4l2 io is finished then deallocate
resources */
mutex_lock(&dev->lock);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 09:00:51 +0000