summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/em28xx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/em28xx')
-rw-r--r--drivers/media/video/em28xx/Kconfig5
-rw-r--r--drivers/media/video/em28xx/em28xx-cards.c103
-rw-r--r--drivers/media/video/em28xx/em28xx-dvb.c16
-rw-r--r--drivers/media/video/em28xx/em28xx-input.c80
-rw-r--r--drivers/media/video/em28xx/em28xx-vbi.c1
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c30
-rw-r--r--drivers/media/video/em28xx/em28xx.h4
7 files changed, 155 insertions, 84 deletions
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 66aefd6eef5..985100ea17a 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,9 +1,9 @@
config VIDEO_EM28XX
tristate "Empia EM28xx USB video capture support"
- depends on VIDEO_DEV && I2C && INPUT
+ depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on VIDEO_IR
+ depends on RC_CORE
select VIDEOBUF_VMALLOC
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
@@ -37,6 +37,7 @@ config VIDEO_EM28XX_DVB
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
+ select DVB_S921 if !DVB_FE_CUSTOMISE
select VIDEOBUF_DVB
---help---
This adds support for DVB cards based on the
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index f7e9168157a..87f77a34eea 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -33,6 +33,7 @@
#include <media/saa7115.h>
#include <media/tvp5150.h>
#include <media/tvaudio.h>
+#include <media/mt9v011.h>
#include <media/i2c-addr.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
@@ -268,6 +269,20 @@ static struct em28xx_reg_seq dikom_dk300_digital[] = {
};
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq leadership_digital[] = {
+ {EM2874_R80_GPIO, 0x70, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq leadership_reset[] = {
+ {EM2874_R80_GPIO, 0xf0, 0xff, 10},
+ {EM2874_R80_GPIO, 0xb0, 0xff, 10},
+ {EM2874_R80_GPIO, 0xf0, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+
/*
* Board definitions
*/
@@ -1224,6 +1239,19 @@ struct em28xx_board em28xx_boards[] = {
.vmux = SAA7115_COMPOSITE0,
} },
},
+
+ [EM2874_LEADERSHIP_ISDBT] = {
+ .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
+ EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_100_KHZ,
+ .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
+ .name = "EM2874 Leadership ISDBT",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = leadership_reset,
+ .dvb_gpio = leadership_digital,
+ .has_dvb = 1,
+ },
+
[EM2880_BOARD_MSI_DIGIVOX_AD] = {
.name = "MSI DigiVox A/D",
.valid = EM28XX_BOARD_NOT_VALIDATED,
@@ -1469,7 +1497,7 @@ struct em28xx_board em28xx_boards[] = {
} },
},
[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
- .name = "Terratec Hybrid XS (em2882)",
+ .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
@@ -1633,11 +1661,11 @@ struct em28xx_board em28xx_boards[] = {
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = EM28XX_AMUX_VIDEO2,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = EM28XX_AMUX_VIDEO2,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_TERRATEC_AV350] = {
@@ -1754,6 +1782,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2868),
.driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2875),
+ .driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0xe300),
.driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
{ USB_DEVICE(0xeb1a, 0xe303),
@@ -1791,7 +1821,7 @@ struct usb_device_id em28xx_id_table[] = {
{ USB_DEVICE(0x0ccd, 0x005e),
.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x0042),
- .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
+ .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x0043),
.driver_info = EM2870_BOARD_TERRATEC_XS },
{ USB_DEVICE(0x0ccd, 0x0047),
@@ -1873,6 +1903,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
+ {0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT},
};
/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
@@ -1887,11 +1918,6 @@ static unsigned short tvp5150_addrs[] = {
I2C_CLIENT_END
};
-static unsigned short mt9v011_addrs[] = {
- 0xba >> 1,
- I2C_CLIENT_END
-};
-
static unsigned short msp3400_addrs[] = {
0x80 >> 1,
0x88 >> 1,
@@ -2407,8 +2433,9 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
dev->init_data.ir_codes = RC_MAP_RC5_HAUPPAUGE_NEW;
dev->init_data.get_key = em28xx_get_key_em_haup;
dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
+ break;
case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
- dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;;
+ dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
break;
@@ -2430,8 +2457,36 @@ void em28xx_card_setup(struct em28xx *dev)
dev->board.is_webcam = 0;
else
dev->progressive = 1;
- } else
- em28xx_set_model(dev);
+ }
+
+ if (!dev->board.is_webcam) {
+ switch (dev->model) {
+ case EM2820_BOARD_UNKNOWN:
+ case EM2800_BOARD_UNKNOWN:
+ /*
+ * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
+ *
+ * This occurs because they share identical USB vendor and
+ * product IDs.
+ *
+ * What we do here is look up the EEPROM hash of the K-WORLD
+ * and if it is found then we decide that we do not have
+ * a DIGIVOX and reset the device to the K-WORLD instead.
+ *
+ * This solution is only valid if they do not share eeprom
+ * hash identities which has not been determined as yet.
+ */
+ if (em28xx_hint_board(dev) < 0)
+ em28xx_errdev("Board not discovered\n");
+ else {
+ em28xx_set_model(dev);
+ em28xx_pre_card_setup(dev);
+ }
+ break;
+ default:
+ em28xx_set_model(dev);
+ }
+ }
em28xx_info("Identified as %s (card=%d)\n",
dev->board.name, dev->model);
@@ -2565,11 +2620,17 @@ void em28xx_card_setup(struct em28xx *dev)
"tvp5150", 0, tvp5150_addrs);
if (dev->em28xx_sensor == EM28XX_MT9V011) {
+ struct mt9v011_platform_data pdata;
+ struct i2c_board_info mt9v011_info = {
+ .type = "mt9v011",
+ .addr = 0xba >> 1,
+ .platform_data = &pdata,
+ };
struct v4l2_subdev *sd;
- sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, "mt9v011", 0, mt9v011_addrs);
- v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
+ pdata.xtal = dev->sensor_xtal;
+ sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
+ &mt9v011_info, NULL);
}
@@ -2632,8 +2693,14 @@ static void request_modules(struct em28xx *dev)
INIT_WORK(&dev->request_module_wk, request_module_async);
schedule_work(&dev->request_module_wk);
}
+
+static void flush_request_modules(struct em28xx *dev)
+{
+ flush_work_sync(&dev->request_module_wk);
+}
#else
#define request_modules(dev)
+#define flush_request_modules(dev)
#endif /* CONFIG_MODULES */
/*
@@ -2749,8 +2816,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
em28xx_pre_card_setup(dev);
if (!dev->board.is_em2800) {
- /* Sets I2C speed to 100 KHz */
- retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
+ /* Resets I2C speed */
+ em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
if (retval < 0) {
em28xx_errdev("%s: em28xx_write_regs_req failed!"
" retval [%d]\n",
@@ -3060,6 +3127,8 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
em28xx_info("disconnecting %s\n", dev->vdev->name);
+ flush_request_modules(dev);
+
/* wait until all current v4l2 io is finished then deallocate
resources */
mutex_lock(&dev->lock);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 3ac8d3025fe..c7c04bf712a 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -37,6 +37,7 @@
#include "mt352_priv.h" /* FIXME */
#include "tda1002x.h"
#include "tda18271.h"
+#include "s921.h"
MODULE_DESCRIPTION("driver for em28xx based DVB cards");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -245,6 +246,10 @@ static struct lgdt3305_config em2870_lgdt3304_dev = {
.qam_if_khz = 4000,
};
+static struct s921_config sharp_isdbt = {
+ .demod_address = 0x30 >> 1
+};
+
static struct zl10353_config em28xx_zl10353_with_xc3028 = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
@@ -481,6 +486,7 @@ static int dvb_init(struct em28xx *dev)
if (!dev->board.has_dvb) {
/* This device does not support the extension */
+ printk(KERN_INFO "em28xx_dvb: This device does not support the extension\n");
return 0;
}
@@ -496,6 +502,16 @@ static int dvb_init(struct em28xx *dev)
em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
/* init frontend */
switch (dev->model) {
+ case EM2874_LEADERSHIP_ISDBT:
+ dvb->frontend = dvb_attach(s921_attach,
+ &sharp_isdbt, &dev->i2c_adap);
+
+ if (!dvb->frontend) {
+ result = -EINVAL;
+ goto out_free;
+ }
+
+ break;
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 6759cd5570d..ba1ba8648c8 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -25,7 +25,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/input.h>
#include <linux/usb.h>
#include <linux/slab.h>
@@ -64,7 +63,7 @@ struct em28xx_ir_poll_result {
struct em28xx_IR {
struct em28xx *dev;
- struct input_dev *input;
+ struct rc_dev *rc;
char name[32];
char phys[32];
@@ -75,10 +74,6 @@ struct em28xx_IR {
unsigned int last_readcount;
int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
-
- /* IR device properties */
-
- struct ir_dev_props props;
};
/**********************************************************
@@ -302,12 +297,12 @@ static void em28xx_ir_handle_key(struct em28xx_IR *ir)
poll_result.toggle_bit, poll_result.read_count,
poll_result.rc_address, poll_result.rc_data[0]);
if (ir->full_code)
- ir_keydown(ir->input,
+ rc_keydown(ir->rc,
poll_result.rc_address << 8 |
poll_result.rc_data[0],
poll_result.toggle_bit);
else
- ir_keydown(ir->input,
+ rc_keydown(ir->rc,
poll_result.rc_data[0],
poll_result.toggle_bit);
@@ -331,9 +326,9 @@ static void em28xx_ir_work(struct work_struct *work)
schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
}
-static int em28xx_ir_start(void *priv)
+static int em28xx_ir_start(struct rc_dev *rc)
{
- struct em28xx_IR *ir = priv;
+ struct em28xx_IR *ir = rc->priv;
INIT_DELAYED_WORK(&ir->work, em28xx_ir_work);
schedule_delayed_work(&ir->work, 0);
@@ -341,30 +336,30 @@ static int em28xx_ir_start(void *priv)
return 0;
}
-static void em28xx_ir_stop(void *priv)
+static void em28xx_ir_stop(struct rc_dev *rc)
{
- struct em28xx_IR *ir = priv;
+ struct em28xx_IR *ir = rc->priv;
cancel_delayed_work_sync(&ir->work);
}
-int em28xx_ir_change_protocol(void *priv, u64 ir_type)
+int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
{
int rc = 0;
- struct em28xx_IR *ir = priv;
+ struct em28xx_IR *ir = rc_dev->priv;
struct em28xx *dev = ir->dev;
u8 ir_config = EM2874_IR_RC5;
/* Adjust xclk based o IR table for RC5/NEC tables */
- if (ir_type == IR_TYPE_RC5) {
+ if (rc_type == RC_TYPE_RC5) {
dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
ir->full_code = 1;
- } else if (ir_type == IR_TYPE_NEC) {
+ } else if (rc_type == RC_TYPE_NEC) {
dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
ir_config = EM2874_IR_NEC;
ir->full_code = 1;
- } else if (ir_type != IR_TYPE_UNKNOWN)
+ } else if (rc_type != RC_TYPE_UNKNOWN)
rc = -EINVAL;
em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
@@ -391,7 +386,7 @@ int em28xx_ir_change_protocol(void *priv, u64 ir_type)
int em28xx_ir_init(struct em28xx *dev)
{
struct em28xx_IR *ir;
- struct input_dev *input_dev;
+ struct rc_dev *rc;
int err = -ENOMEM;
if (dev->board.ir_codes == NULL) {
@@ -400,28 +395,27 @@ int em28xx_ir_init(struct em28xx *dev)
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev)
+ rc = rc_allocate_device();
+ if (!ir || !rc)
goto err_out_free;
/* record handles to ourself */
ir->dev = dev;
dev->ir = ir;
-
- ir->input = input_dev;
+ ir->rc = rc;
/*
* em2874 supports more protocols. For now, let's just announce
* the two protocols that were already tested
*/
- ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
- ir->props.priv = ir;
- ir->props.change_protocol = em28xx_ir_change_protocol;
- ir->props.open = em28xx_ir_start;
- ir->props.close = em28xx_ir_stop;
+ rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
+ rc->priv = ir;
+ rc->change_protocol = em28xx_ir_change_protocol;
+ rc->open = em28xx_ir_start;
+ rc->close = em28xx_ir_stop;
/* By default, keep protocol field untouched */
- err = em28xx_ir_change_protocol(ir, IR_TYPE_UNKNOWN);
+ err = em28xx_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
if (err)
goto err_out_free;
@@ -435,27 +429,27 @@ int em28xx_ir_init(struct em28xx *dev)
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
- input_dev->name = ir->name;
- input_dev->phys = ir->phys;
- input_dev->id.bustype = BUS_USB;
- input_dev->id.version = 1;
- input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
- input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
-
- input_dev->dev.parent = &dev->udev->dev;
-
-
+ rc->input_name = ir->name;
+ rc->input_phys = ir->phys;
+ rc->input_id.bustype = BUS_USB;
+ rc->input_id.version = 1;
+ rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+ rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+ rc->dev.parent = &dev->udev->dev;
+ rc->map_name = dev->board.ir_codes;
+ rc->driver_name = MODULE_NAME;
/* all done */
- err = ir_input_register(ir->input, dev->board.ir_codes,
- &ir->props, MODULE_NAME);
+ err = rc_register_device(rc);
if (err)
goto err_out_stop;
return 0;
+
err_out_stop:
dev->ir = NULL;
err_out_free:
+ rc_free_device(rc);
kfree(ir);
return err;
}
@@ -468,8 +462,8 @@ int em28xx_ir_fini(struct em28xx *dev)
if (!ir)
return 0;
- em28xx_ir_stop(ir);
- ir_input_unregister(ir->input);
+ em28xx_ir_stop(ir->rc);
+ rc_unregister_device(ir->rc);
kfree(ir);
/* done */
@@ -557,7 +551,7 @@ void em28xx_deregister_snapshot_button(struct em28xx *dev)
{
if (dev->sbutton_input_dev != NULL) {
em28xx_info("Deregistering snapshot button\n");
- cancel_rearming_delayed_work(&dev->sbutton_query_work);
+ cancel_delayed_work_sync(&dev->sbutton_query_work);
input_unregister_device(dev->sbutton_input_dev);
dev->sbutton_input_dev = NULL;
}
diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/video/em28xx/em28xx-vbi.c
index 7f1c4a2173b..2b4c9cba2d6 100644
--- a/drivers/media/video/em28xx/em28xx-vbi.c
+++ b/drivers/media/video/em28xx/em28xx-vbi.c
@@ -23,6 +23,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/hardirq.h>
#include <linux/init.h>
#include "em28xx.h"
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 2c300728003..f34d524ccb0 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1434,7 +1434,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
/* It isn't an AC97 control. Sends it to the v4l2 dev interface */
if (rc == 1) {
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_ctrl, ctrl);
+ rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0, core, s_ctrl, ctrl);
/*
* In the case of non-AC97 volume controls, we still need
@@ -1708,11 +1708,15 @@ static int vidioc_streamoff(struct file *file, void *priv,
fh, type, fh->resources, dev->resources);
if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- videobuf_streamoff(&fh->vb_vidq);
- res_free(fh, EM28XX_RESOURCE_VIDEO);
+ if (res_check(fh, EM28XX_RESOURCE_VIDEO)) {
+ videobuf_streamoff(&fh->vb_vidq);
+ res_free(fh, EM28XX_RESOURCE_VIDEO);
+ }
} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
- videobuf_streamoff(&fh->vb_vbiq);
- res_free(fh, EM28XX_RESOURCE_VBI);
+ if (res_check(fh, EM28XX_RESOURCE_VBI)) {
+ videobuf_streamoff(&fh->vb_vbiq);
+ res_free(fh, EM28XX_RESOURCE_VBI);
+ }
}
return 0;
@@ -1934,19 +1938,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
O_NONBLOCK);
}
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
- struct em28xx_fh *fh = priv;
-
- if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
- else
- return videobuf_cgmbuf(&fh->vb_vbiq, mbuf, 8);
-}
-#endif
-
-
/* ----------------------------------------------------------- */
/* RADIO ESPECIFIC IOCTLS */
/* ----------------------------------------------------------- */
@@ -2359,9 +2350,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
.vidioc_s_register = vidioc_s_register,
.vidioc_g_chip_ident = vidioc_g_chip_ident,
#endif
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
- .vidiocgmbuf = vidiocgmbuf,
-#endif
};
static const struct video_device em28xx_video_template = {
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 6a75e6a4fc2..6f2795a3d4b 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -33,7 +33,7 @@
#include <media/videobuf-vmalloc.h>
#include <media/v4l2-device.h>
#include <media/ir-kbd-i2c.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
#include <media/videobuf-dvb.h>
#endif
@@ -117,6 +117,8 @@
#define EM2800_BOARD_VC211A 74
#define EM2882_BOARD_DIKOM_DK300 75
#define EM2870_BOARD_KWORLD_A340 76
+#define EM2874_LEADERSHIP_ISDBT 77
+
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 11:51:49 +0000