summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/gspca
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/gspca')
-rw-r--r--drivers/media/video/gspca/Kconfig10
-rw-r--r--drivers/media/video/gspca/Makefile2
-rw-r--r--drivers/media/video/gspca/gl860/gl860.h1
-rw-r--r--drivers/media/video/gspca/gspca.c23
-rw-r--r--drivers/media/video/gspca/ov519.c133
-rw-r--r--drivers/media/video/gspca/se401.c774
-rw-r--r--drivers/media/video/gspca/se401.h90
-rw-r--r--drivers/media/video/gspca/sonixj.c6
-rw-r--r--drivers/media/video/gspca/sunplus.c3
-rw-r--r--drivers/media/video/gspca/t613.c2
10 files changed, 1002 insertions, 42 deletions
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 34ae2c29979..43d9a20caeb 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -179,6 +179,16 @@ config USB_GSPCA_PAC7311
To compile this driver as a module, choose M here: the
module will be called gspca_pac7311.
+config USB_GSPCA_SE401
+ tristate "SE401 USB Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want support for cameras based on the
+ Endpoints (formerly known as AOX) se401 chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_se401.
+
config USB_GSPCA_SN9C2028
tristate "SONIX Dual-Mode USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 802fbe1bff4..d6364a86333 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_GSPCA_OV534_9) += gspca_ov534_9.o
obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o
obj-$(CONFIG_USB_GSPCA_PAC7302) += gspca_pac7302.o
obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SE401) += gspca_se401.o
obj-$(CONFIG_USB_GSPCA_SN9C2028) += gspca_sn9c2028.o
obj-$(CONFIG_USB_GSPCA_SN9C20X) += gspca_sn9c20x.o
obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o
@@ -58,6 +59,7 @@ gspca_ov534_9-objs := ov534_9.o
gspca_pac207-objs := pac207.o
gspca_pac7302-objs := pac7302.o
gspca_pac7311-objs := pac7311.o
+gspca_se401-objs := se401.o
gspca_sn9c2028-objs := sn9c2028.o
gspca_sn9c20x-objs := sn9c20x.o
gspca_sonixb-objs := sonixb.o
diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/video/gspca/gl860/gl860.h
index 49ad4acbf60..0330a0293b9 100644
--- a/drivers/media/video/gspca/gl860/gl860.h
+++ b/drivers/media/video/gspca/gl860/gl860.h
@@ -18,7 +18,6 @@
*/
#ifndef GL860_DEV_H
#define GL860_DEV_H
-#include <linux/version.h>
#include "gspca.h"
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 08ce9948d99..5da4879f47f 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -24,7 +24,6 @@
#define MODULE_NAME "gspca"
#include <linux/init.h>
-#include <linux/version.h>
#include <linux/fs.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
@@ -51,11 +50,12 @@
#error "DEF_NURBS too big"
#endif
+#define DRIVER_VERSION_NUMBER "2.13.0"
+
MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>");
MODULE_DESCRIPTION("GSPCA USB Camera Driver");
MODULE_LICENSE("GPL");
-
-#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 13, 0)
+MODULE_VERSION(DRIVER_VERSION_NUMBER);
#ifdef GSPCA_DEBUG
int gspca_debug = D_ERR | D_PROBE;
@@ -443,8 +443,11 @@ void gspca_frame_add(struct gspca_dev *gspca_dev,
} else {
switch (gspca_dev->last_packet_type) {
case DISCARD_PACKET:
- if (packet_type == LAST_PACKET)
+ if (packet_type == LAST_PACKET) {
gspca_dev->last_packet_type = packet_type;
+ gspca_dev->image = NULL;
+ gspca_dev->image_len = 0;
+ }
return;
case LAST_PACKET:
return;
@@ -1278,10 +1281,10 @@ static int vidioc_querycap(struct file *file, void *priv,
ret = -ENODEV;
goto out;
}
- strncpy((char *) cap->driver, gspca_dev->sd_desc->name,
+ strlcpy((char *) cap->driver, gspca_dev->sd_desc->name,
sizeof cap->driver);
if (gspca_dev->dev->product != NULL) {
- strncpy((char *) cap->card, gspca_dev->dev->product,
+ strlcpy((char *) cap->card, gspca_dev->dev->product,
sizeof cap->card);
} else {
snprintf((char *) cap->card, sizeof cap->card,
@@ -1291,7 +1294,6 @@ static int vidioc_querycap(struct file *file, void *priv,
}
usb_make_path(gspca_dev->dev, (char *) cap->bus_info,
sizeof(cap->bus_info));
- cap->version = DRIVER_VERSION_NUMBER;
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
| V4L2_CAP_STREAMING
| V4L2_CAP_READWRITE;
@@ -1460,7 +1462,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
return -EINVAL;
input->type = V4L2_INPUT_TYPE_CAMERA;
input->status = gspca_dev->cam.input_flags;
- strncpy(input->name, gspca_dev->sd_desc->name,
+ strlcpy(input->name, gspca_dev->sd_desc->name,
sizeof input->name);
return 0;
}
@@ -2478,10 +2480,7 @@ EXPORT_SYMBOL(gspca_auto_gain_n_exposure);
/* -- module insert / remove -- */
static int __init gspca_init(void)
{
- info("v%d.%d.%d registered",
- (DRIVER_VERSION_NUMBER >> 16) & 0xff,
- (DRIVER_VERSION_NUMBER >> 8) & 0xff,
- DRIVER_VERSION_NUMBER & 0xff);
+ info("v" DRIVER_VERSION_NUMBER " registered");
return 0;
}
static void __exit gspca_exit(void)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 057e287b915..18305c89083 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -134,6 +134,7 @@ enum sensors {
SEN_OV7670,
SEN_OV76BE,
SEN_OV8610,
+ SEN_OV9600,
};
/* Note this is a bit of a hack, but the w9968cf driver needs the code for all
@@ -340,6 +341,10 @@ static const unsigned ctrl_dis[] = {
(1 << EXPOSURE) |
(1 << AUTOGAIN) |
(1 << FREQ),
+[SEN_OV9600] = ((1 << NCTRL) - 1) /* no control */
+ ^ ((1 << EXPOSURE) /* but exposure */
+ | (1 << AUTOGAIN)), /* and autogain */
+
};
static const struct v4l2_pix_format ov519_vga_mode[] = {
@@ -525,6 +530,17 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 0},
};
+static const struct v4l2_pix_format ovfx2_ov9600_mode[] = {
+ {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 1280,
+ .sizeimage = 1280 * 1024,
+ .colorspace = V4L2_COLORSPACE_SRGB},
+};
/* Registers common to OV511 / OV518 */
#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */
@@ -1807,6 +1823,22 @@ static const struct ov_i2c_regvals norm_7660[] = {
| OV7670_COM8_AEC},
{0xa1, 0xc8}
};
+static const struct ov_i2c_regvals norm_9600[] = {
+ {0x12, 0x80},
+ {0x0c, 0x28},
+ {0x11, 0x80},
+ {0x13, 0xb5},
+ {0x14, 0x3e},
+ {0x1b, 0x04},
+ {0x24, 0xb0},
+ {0x25, 0x90},
+ {0x26, 0x94},
+ {0x35, 0x90},
+ {0x37, 0x07},
+ {0x38, 0x08},
+ {0x01, 0x8e},
+ {0x02, 0x85}
+};
/* 7670. Defaults taken from OmniVision provided data,
* as provided by Jonathan Corbet of OLPC */
@@ -2400,9 +2432,12 @@ static int ov518_i2c_r(struct sd *sd, u8 reg)
/* Initiate 2-byte write cycle */
reg_w(sd, R518_I2C_CTL, 0x03);
+ reg_r8(sd, R518_I2C_CTL);
/* Initiate 2-byte read cycle */
reg_w(sd, R518_I2C_CTL, 0x05);
+ reg_r8(sd, R518_I2C_CTL);
+
value = reg_r(sd, R51x_I2C_DATA);
PDEBUG(D_USBI, "ov518_i2c_r %02x %02x", reg, value);
return value;
@@ -2686,7 +2721,7 @@ static void write_i2c_regvals(struct sd *sd,
*
***************************************************************************/
-/* This initializes the OV2x10 / OV3610 / OV3620 */
+/* This initializes the OV2x10 / OV3610 / OV3620 / OV9600 */
static void ov_hires_configure(struct sd *sd)
{
int high, low;
@@ -2702,19 +2737,32 @@ static void ov_hires_configure(struct sd *sd)
high = i2c_r(sd, 0x0a);
low = i2c_r(sd, 0x0b);
/* info("%x, %x", high, low); */
- if (high == 0x96 && low == 0x40) {
- PDEBUG(D_PROBE, "Sensor is an OV2610");
- sd->sensor = SEN_OV2610;
- } else if (high == 0x96 && low == 0x41) {
- PDEBUG(D_PROBE, "Sensor is an OV2610AE");
- sd->sensor = SEN_OV2610AE;
- } else if (high == 0x36 && (low & 0x0f) == 0x00) {
- PDEBUG(D_PROBE, "Sensor is an OV3610");
- sd->sensor = SEN_OV3610;
- } else {
- err("Error unknown sensor type: %02x%02x",
- high, low);
+ switch (high) {
+ case 0x96:
+ switch (low) {
+ case 0x40:
+ PDEBUG(D_PROBE, "Sensor is a OV2610");
+ sd->sensor = SEN_OV2610;
+ return;
+ case 0x41:
+ PDEBUG(D_PROBE, "Sensor is a OV2610AE");
+ sd->sensor = SEN_OV2610AE;
+ return;
+ case 0xb1:
+ PDEBUG(D_PROBE, "Sensor is a OV9600");
+ sd->sensor = SEN_OV9600;
+ return;
+ }
+ break;
+ case 0x36:
+ if ((low & 0x0f) == 0x00) {
+ PDEBUG(D_PROBE, "Sensor is a OV3610");
+ sd->sensor = SEN_OV3610;
+ return;
+ }
+ break;
}
+ err("Error unknown sensor type: %02x%02x", high, low);
}
/* This initializes the OV8110, OV8610 sensor. The OV8110 uses
@@ -2810,7 +2858,6 @@ static void ov7xx0_configure(struct sd *sd)
case 0x60:
PDEBUG(D_PROBE, "Sensor is a OV7660");
sd->sensor = SEN_OV7660;
- sd->invert_led = 0;
break;
default:
PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
@@ -3289,7 +3336,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
case BRIDGE_OV519:
cam->cam_mode = ov519_vga_mode;
cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
- sd->invert_led = !sd->invert_led;
break;
case BRIDGE_OVFX2:
cam->cam_mode = ov519_vga_mode;
@@ -3400,6 +3446,10 @@ static int sd_init(struct gspca_dev *gspca_dev)
cam->cam_mode = ovfx2_ov3610_mode;
cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode);
break;
+ case SEN_OV9600:
+ cam->cam_mode = ovfx2_ov9600_mode;
+ cam->nmodes = ARRAY_SIZE(ovfx2_ov9600_mode);
+ break;
default:
if (sd->sif) {
cam->cam_mode = ov519_sif_mode;
@@ -3497,6 +3547,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
case SEN_OV8610:
write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610));
break;
+ case SEN_OV9600:
+ write_i2c_regvals(sd, norm_9600, ARRAY_SIZE(norm_9600));
+
+ /* enable autoexpo */
+/* i2c_w_mask(sd, 0x13, 0x05, 0x05); */
+ break;
}
return gspca_dev->usb_err;
error:
@@ -4085,6 +4141,33 @@ static void mode_init_ov_sensor_regs(struct sd *sd)
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
break;
+ case SEN_OV9600: {
+ const struct ov_i2c_regvals *vals;
+ static const struct ov_i2c_regvals sxga_15[] = {
+ {0x11, 0x80}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75}
+ };
+ static const struct ov_i2c_regvals sxga_7_5[] = {
+ {0x11, 0x81}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75}
+ };
+ static const struct ov_i2c_regvals vga_30[] = {
+ {0x11, 0x81}, {0x14, 0x7e}, {0x24, 0x70}, {0x25, 0x60}
+ };
+ static const struct ov_i2c_regvals vga_15[] = {
+ {0x11, 0x83}, {0x14, 0x3e}, {0x24, 0x80}, {0x25, 0x70}
+ };
+
+ /* frame rates:
+ * 15fps / 7.5 fps for 1280x1024
+ * 30fps / 15fps for 640x480
+ */
+ i2c_w_mask(sd, 0x12, qvga ? 0x40 : 0x00, 0x40);
+ if (qvga)
+ vals = sd->frame_rate < 30 ? vga_15 : vga_30;
+ else
+ vals = sd->frame_rate < 15 ? sxga_7_5 : sxga_15;
+ write_i2c_regvals(sd, vals, ARRAY_SIZE(sxga_15));
+ return;
+ }
default:
return;
}
@@ -4120,6 +4203,7 @@ static void set_ov_sensor_window(struct sd *sd)
case SEN_OV2610AE:
case SEN_OV3610:
case SEN_OV7670:
+ case SEN_OV9600:
mode_init_ov_sensor_regs(sd);
return;
case SEN_OV7660:
@@ -4919,23 +5003,24 @@ static const struct sd_desc sd_desc = {
/* -- module initialisation -- */
static const struct usb_device_id device_table[] = {
{USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF },
- {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x041e, 0x4052),
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x041e, 0x4064),
- .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ {USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4067), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x041e, 0x4068),
+ {USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x045e, 0x028c),
.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
- {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x054c, 0x0155),
- .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 },
{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
- {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x05a9, 0x0519),
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ {USB_DEVICE(0x05a9, 0x0530),
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x05a9, 0x2800), .driver_info = BRIDGE_OVFX2 },
{USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 },
diff --git a/drivers/media/video/gspca/se401.c b/drivers/media/video/gspca/se401.c
new file mode 100644
index 00000000000..4c283c24c75
--- /dev/null
+++ b/drivers/media/video/gspca/se401.c
@@ -0,0 +1,774 @@
+/*
+ * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver
+ *
+ * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the v4l1 se401 driver which is:
+ *
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define MODULE_NAME "se401"
+
+#define BULK_SIZE 4096
+#define PACKET_SIZE 1024
+#define READ_REQ_SIZE 64
+#define MAX_MODES ((READ_REQ_SIZE - 6) / 4)
+/* The se401 compression algorithm uses a fixed quant factor, which
+ can be configured by setting the high nibble of the SE401_OPERATINGMODE
+ feature. This needs to exactly match what is in libv4l! */
+#define SE401_QUANT_FACT 8
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "gspca.h"
+#include "se401.h"
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Endpoints se401");
+MODULE_LICENSE("GPL");
+
+/* controls */
+enum e_ctrl {
+ BRIGHTNESS,
+ GAIN,
+ EXPOSURE,
+ FREQ,
+ NCTRL /* number of controls */
+};
+
+/* exposure change state machine states */
+enum {
+ EXPO_CHANGED,
+ EXPO_DROP_FRAME,
+ EXPO_NO_CHANGE,
+};
+
+/* specific webcam descriptor */
+struct sd {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+ struct gspca_ctrl ctrls[NCTRL];
+ struct v4l2_pix_format fmts[MAX_MODES];
+ int pixels_read;
+ int packet_read;
+ u8 packet[PACKET_SIZE];
+ u8 restart_stream;
+ u8 button_state;
+ u8 resetlevel;
+ u8 resetlevel_frame_count;
+ int resetlevel_adjust_dir;
+ int expo_change_state;
+};
+
+static void setbrightness(struct gspca_dev *gspca_dev);
+static void setgain(struct gspca_dev *gspca_dev);
+static void setexposure(struct gspca_dev *gspca_dev);
+
+static const struct ctrl sd_ctrls[NCTRL] = {
+[BRIGHTNESS] = {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = 15,
+ },
+ .set_control = setbrightness
+ },
+[GAIN] = {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = 50, /* Really 63 but > 50 is not pretty */
+ .step = 1,
+ .default_value = 25,
+ },
+ .set_control = setgain
+ },
+[EXPOSURE] = {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+ .maximum = 32767,
+ .step = 1,
+ .default_value = 15000,
+ },
+ .set_control = setexposure
+ },
+[FREQ] = {
+ {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Light frequency filter",
+ .minimum = 0,
+ .maximum = 2,
+ .step = 1,
+ .default_value = 0,
+ },
+ .set_control = setexposure
+ },
+};
+
+static void se401_write_req(struct gspca_dev *gspca_dev, u16 req, u16 value,
+ int silent)
+{
+ int err;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+
+ err = usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0), req,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, 0, NULL, 0, 1000);
+ if (err < 0) {
+ if (!silent)
+ err("write req failed req %#04x val %#04x error %d",
+ req, value, err);
+ gspca_dev->usb_err = err;
+ }
+}
+
+static void se401_read_req(struct gspca_dev *gspca_dev, u16 req, int silent)
+{
+ int err;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+
+ if (USB_BUF_SZ < READ_REQ_SIZE) {
+ err("USB_BUF_SZ too small!!");
+ gspca_dev->usb_err = -ENOBUFS;
+ return;
+ }
+
+ err = usb_control_msg(gspca_dev->dev,
+ usb_rcvctrlpipe(gspca_dev->dev, 0), req,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, gspca_dev->usb_buf, READ_REQ_SIZE, 1000);
+ if (err < 0) {
+ if (!silent)
+ err("read req failed req %#04x error %d", req, err);
+ gspca_dev->usb_err = err;
+ }
+}
+
+static void se401_set_feature(struct gspca_dev *gspca_dev,
+ u16 selector, u16 param)
+{
+ int err;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+
+ err = usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ SE401_REQ_SET_EXT_FEATURE,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ param, selector, NULL, 0, 1000);
+ if (err < 0) {
+ err("set feature failed sel %#04x param %#04x error %d",
+ selector, param, err);
+ gspca_dev->usb_err = err;
+ }
+}
+
+static int se401_get_feature(struct gspca_dev *gspca_dev, u16 selector)
+{
+ int err;
+
+ if (gspca_dev->usb_err < 0)
+ return gspca_dev->usb_err;
+
+ if (USB_BUF_SZ < 2) {
+ err("USB_BUF_SZ too small!!");
+ gspca_dev->usb_err = -ENOBUFS;
+ return gspca_dev->usb_err;
+ }
+
+ err = usb_control_msg(gspca_dev->dev,
+ usb_rcvctrlpipe(gspca_dev->dev, 0),
+ SE401_REQ_GET_EXT_FEATURE,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, selector, gspca_dev->usb_buf, 2, 1000);
+ if (err < 0) {
+ err("get feature failed sel %#04x error %d", selector, err);
+ gspca_dev->usb_err = err;
+ return err;
+ }
+ return gspca_dev->usb_buf[0] | (gspca_dev->usb_buf[1] << 8);
+}
+
+static void setbrightness(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS))
+ return;
+
+ /* HDG: this does not seem to do anything on my cam */
+ se401_write_req(gspca_dev, SE401_REQ_SET_BRT,
+ sd->ctrls[BRIGHTNESS].val, 0);
+}
+
+static void setgain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u16 gain = 63 - sd->ctrls[GAIN].val;
+
+ /* red color gain */
+ se401_set_feature(gspca_dev, HV7131_REG_ARCG, gain);
+ /* green color gain */
+ se401_set_feature(gspca_dev, HV7131_REG_AGCG, gain);
+ /* blue color gain */
+ se401_set_feature(gspca_dev, HV7131_REG_ABCG, gain);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int integration = sd->ctrls[EXPOSURE].val << 6;
+ u8 expose_h, expose_m, expose_l;
+
+ /* Do this before the set_feature calls, for proper timing wrt
+ the interrupt driven pkt_scan. Note we may still race but that
+ is not a big issue, the expo change state machine is merely for
+ avoiding underexposed frames getting send out, if one sneaks
+ through so be it */
+ sd->expo_change_state = EXPO_CHANGED;
+
+ if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_50HZ)
+ integration = integration - integration % 106667;
+ if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_60HZ)
+ integration = integration - integration % 88889;
+
+ expose_h = (integration >> 16);
+ expose_m = (integration >> 8);
+ expose_l = integration;
+
+ /* integration time low */
+ se401_set_feature(gspca_dev, HV7131_REG_TITL, expose_l);
+ /* integration time mid */
+ se401_set_feature(gspca_dev, HV7131_REG_TITM, expose_m);
+ /* integration time high */
+ se401_set_feature(gspca_dev, HV7131_REG_TITU, expose_h);
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *)gspca_dev;
+ struct cam *cam = &gspca_dev->cam;
+ u8 *cd = gspca_dev->usb_buf;
+ int i, j, n;
+ int widths[MAX_MODES], heights[MAX_MODES];
+
+ /* Read the camera descriptor */
+ se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 1);
+ if (gspca_dev->usb_err) {
+ /* Sometimes after being idle for a while the se401 won't
+ respond and needs a good kicking */
+ usb_reset_device(gspca_dev->dev);
+ gspca_dev->usb_err = 0;
+ se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0);
+ }
+
+ /* Some cameras start with their LED on */
+ se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0);
+ if (gspca_dev->usb_err)
+ return gspca_dev->usb_err;
+
+ if (cd[1] != 0x41) {
+ err("Wrong descriptor type");
+ return -ENODEV;
+ }
+
+ if (!(cd[2] & SE401_FORMAT_BAYER)) {
+ err("Bayer format not supported!");
+ return -ENODEV;
+ }
+
+ if (cd[3])
+ info("ExtraFeatures: %d", cd[3]);
+
+ n = cd[4] | (cd[5] << 8);
+ if (n > MAX_MODES) {
+ err("Too many frame sizes");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < n ; i++) {
+ widths[i] = cd[6 + i * 4 + 0] | (cd[6 + i * 4 + 1] << 8);
+ heights[i] = cd[6 + i * 4 + 2] | (cd[6 + i * 4 + 3] << 8);
+ }
+
+ for (i = 0; i < n ; i++) {
+ sd->fmts[i].width = widths[i];
+ sd->fmts[i].height = heights[i];
+ sd->fmts[i].field = V4L2_FIELD_NONE;
+ sd->fmts[i].colorspace = V4L2_COLORSPACE_SRGB;
+ sd->fmts[i].priv = 1;
+
+ /* janggu compression only works for 1/4th or 1/16th res */
+ for (j = 0; j < n; j++) {
+ if (widths[j] / 2 == widths[i] &&
+ heights[j] / 2 == heights[i]) {
+ sd->fmts[i].priv = 2;
+ break;
+ }
+ }
+ /* 1/16th if available too is better then 1/4th, because
+ we then use a larger area of the sensor */
+ for (j = 0; j < n; j++) {
+ if (widths[j] / 4 == widths[i] &&
+ heights[j] / 4 == heights[i]) {
+ sd->fmts[i].priv = 4;
+ break;
+ }
+ }
+
+ if (sd->fmts[i].priv == 1) {
+ /* Not a 1/4th or 1/16th res, use bayer */
+ sd->fmts[i].pixelformat = V4L2_PIX_FMT_SBGGR8;
+ sd->fmts[i].bytesperline = widths[i];
+ sd->fmts[i].sizeimage = widths[i] * heights[i];
+ info("Frame size: %dx%d bayer", widths[i], heights[i]);
+ } else {
+ /* Found a match use janggu compression */
+ sd->fmts[i].pixelformat = V4L2_PIX_FMT_SE401;
+ sd->fmts[i].bytesperline = 0;
+ sd->fmts[i].sizeimage = widths[i] * heights[i] * 3;
+ info("Frame size: %dx%d 1/%dth janggu",
+ widths[i], heights[i],
+ sd->fmts[i].priv * sd->fmts[i].priv);
+ }
+ }
+
+ cam->cam_mode = sd->fmts;
+ cam->nmodes = n;
+ cam->bulk = 1;
+ cam->bulk_size = BULK_SIZE;
+ cam->bulk_nurbs = 4;
+ cam->ctrls = sd->ctrls;
+ gspca_dev->nbalt = 1; /* Ignore the bogus isoc alt settings */
+ sd->resetlevel = 0x2d; /* Set initial resetlevel */
+
+ /* See if the camera supports brightness */
+ se401_read_req(gspca_dev, SE401_REQ_GET_BRT, 1);
+ if (gspca_dev->usb_err) {
+ gspca_dev->ctrl_dis = (1 << BRIGHTNESS);
+ gspca_dev->usb_err = 0;
+ }
+
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ return 0;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *)gspca_dev;
+ int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+ int mode = 0;
+
+ se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 1);
+ if (gspca_dev->usb_err) {
+ /* Sometimes after being idle for a while the se401 won't
+ respond and needs a good kicking */
+ usb_reset_device(gspca_dev->dev);
+ gspca_dev->usb_err = 0;
+ se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 0);
+ }
+ se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 1, 0);
+
+ se401_set_feature(gspca_dev, HV7131_REG_MODE_B, 0x05);
+
+ /* set size + mode */
+ se401_write_req(gspca_dev, SE401_REQ_SET_WIDTH,
+ gspca_dev->width * mult, 0);
+ se401_write_req(gspca_dev, SE401_REQ_SET_HEIGHT,
+ gspca_dev->height * mult, 0);
+ /*
+ * HDG: disabled this as it does not seem to do anything
+ * se401_write_req(gspca_dev, SE401_REQ_SET_OUTPUT_MODE,
+ * SE401_FORMAT_BAYER, 0);
+ */
+
+ switch (mult) {
+ case 1: /* Raw bayer */
+ mode = 0x03; break;
+ case 2: /* 1/4th janggu */
+ mode = SE401_QUANT_FACT << 4; break;
+ case 4: /* 1/16th janggu */
+ mode = (SE401_QUANT_FACT << 4) | 0x02; break;
+ }
+ se401_set_feature(gspca_dev, SE401_OPERATINGMODE, mode);
+
+ setbrightness(gspca_dev);
+ setgain(gspca_dev);
+ setexposure(gspca_dev);
+ se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel);
+
+ sd->packet_read = 0;
+ sd->pixels_read = 0;
+ sd->restart_stream = 0;
+ sd->resetlevel_frame_count = 0;
+ sd->resetlevel_adjust_dir = 0;
+ sd->expo_change_state = EXPO_NO_CHANGE;
+
+ se401_write_req(gspca_dev, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, 0);
+
+ return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ se401_write_req(gspca_dev, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, 0);
+ se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0);
+ se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 0, 0);
+}
+
+static void sd_dq_callback(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *)gspca_dev;
+ unsigned int ahrc, alrc;
+ int oldreset, adjust_dir;
+
+ /* Restart the stream if requested do so by pkt_scan */
+ if (sd->restart_stream) {
+ sd_stopN(gspca_dev);
+ sd_start(gspca_dev);
+ sd->restart_stream = 0;
+ }
+
+ /* Automatically adjust sensor reset level
+ Hyundai have some really nice docs about this and other sensor
+ related stuff on their homepage: www.hei.co.kr */
+ sd->resetlevel_frame_count++;
+ if (sd->resetlevel_frame_count < 20)
+ return;
+
+ /* For some reason this normally read-only register doesn't get reset
+ to zero after reading them just once... */
+ se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH);
+ se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL);
+ se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH);
+ se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL);
+ ahrc = 256*se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH) +
+ se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL);
+ alrc = 256*se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH) +
+ se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL);
+
+ /* Not an exact science, but it seems to work pretty well... */
+ oldreset = sd->resetlevel;
+ if (alrc > 10) {
+ while (alrc >= 10 && sd->resetlevel < 63) {
+ sd->resetlevel++;
+ alrc /= 2;
+ }
+ } else if (ahrc > 20) {
+ while (ahrc >= 20 && sd->resetlevel > 0) {
+ sd->resetlevel--;
+ ahrc /= 2;
+ }
+ }
+ /* Detect ping-pong-ing and halve adjustment to avoid overshoot */
+ if (sd->resetlevel > oldreset)
+ adjust_dir = 1;
+ else
+ adjust_dir = -1;
+ if (sd->resetlevel_adjust_dir &&
+ sd->resetlevel_adjust_dir != adjust_dir)
+ sd->resetlevel = oldreset + (sd->resetlevel - oldreset) / 2;
+
+ if (sd->resetlevel != oldreset) {
+ sd->resetlevel_adjust_dir = adjust_dir;
+ se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel);
+ }
+
+ sd->resetlevel_frame_count = 0;
+}
+
+static void sd_complete_frame(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+ struct sd *sd = (struct sd *)gspca_dev;
+
+ switch (sd->expo_change_state) {
+ case EXPO_CHANGED:
+ /* The exposure was changed while this frame
+ was being send, so this frame is ok */
+ sd->expo_change_state = EXPO_DROP_FRAME;
+ break;
+ case EXPO_DROP_FRAME:
+ /* The exposure was changed while this frame
+ was being captured, drop it! */
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ sd->expo_change_state = EXPO_NO_CHANGE;
+ break;
+ case EXPO_NO_CHANGE:
+ break;
+ }
+ gspca_frame_add(gspca_dev, LAST_PACKET, data, len);
+}
+
+static void sd_pkt_scan_janggu(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+ struct sd *sd = (struct sd *)gspca_dev;
+ int imagesize = gspca_dev->width * gspca_dev->height;
+ int i, plen, bits, pixels, info, count;
+
+ if (sd->restart_stream)
+ return;
+
+ /* Sometimes a 1024 bytes garbage bulk packet is send between frames */
+ if (gspca_dev->last_packet_type == LAST_PACKET && len == 1024) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+
+ i = 0;
+ while (i < len) {
+ /* Read header if not already be present from prev bulk pkt */
+ if (sd->packet_read < 4) {
+ count = 4 - sd->packet_read;
+ if (count > len - i)
+ count = len - i;
+ memcpy(&sd->packet[sd->packet_read], &data[i], count);
+ sd->packet_read += count;
+ i += count;
+ if (sd->packet_read < 4)
+ break;
+ }
+ bits = sd->packet[3] + (sd->packet[2] << 8);
+ pixels = sd->packet[1] + ((sd->packet[0] & 0x3f) << 8);
+ info = (sd->packet[0] & 0xc0) >> 6;
+ plen = ((bits + 47) >> 4) << 1;
+ /* Sanity checks */
+ if (plen > 1024) {
+ err("invalid packet len %d restarting stream", plen);
+ goto error;
+ }
+ if (info == 3) {
+ err("unknown frame info value restarting stream");
+ goto error;
+ }
+
+ /* Read (remainder of) packet contents */
+ count = plen - sd->packet_read;
+ if (count > len - i)
+ count = len - i;
+ memcpy(&sd->packet[sd->packet_read], &data[i], count);
+ sd->packet_read += count;
+ i += count;
+ if (sd->packet_read < plen)
+ break;
+
+ sd->pixels_read += pixels;
+ sd->packet_read = 0;
+
+ switch (info) {
+ case 0: /* Frame data */
+ gspca_frame_add(gspca_dev, INTER_PACKET, sd->packet,
+ plen);
+ break;
+ case 1: /* EOF */
+ if (sd->pixels_read != imagesize) {
+ err("frame size %d expected %d",
+ sd->pixels_read, imagesize);
+ goto error;
+ }
+ sd_complete_frame(gspca_dev, sd->packet, plen);
+ return; /* Discard the rest of the bulk packet !! */
+ case 2: /* SOF */
+ gspca_frame_add(gspca_dev, FIRST_PACKET, sd->packet,
+ plen);
+ sd->pixels_read = pixels;
+ break;
+ }
+ }
+ return;
+
+error:
+ sd->restart_stream = 1;
+ /* Give userspace a 0 bytes frame, so our dq callback gets
+ called and it can restart the stream */
+ gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
+}
+
+static void sd_pkt_scan_bayer(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+ struct cam *cam = &gspca_dev->cam;
+ int imagesize = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
+
+ if (gspca_dev->image_len == 0) {
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
+ return;
+ }
+
+ if (gspca_dev->image_len + len >= imagesize) {
+ sd_complete_frame(gspca_dev, data, len);
+ return;
+ }
+
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+ int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+
+ if (len == 0)
+ return;
+
+ if (mult == 1) /* mult == 1 means raw bayer */
+ sd_pkt_scan_bayer(gspca_dev, data, len);
+ else
+ sd_pkt_scan_janggu(gspca_dev, data, len);
+}
+
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+ struct v4l2_querymenu *menu)
+{
+ switch (menu->id) {
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ switch (menu->index) {
+ case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED:
+ strcpy((char *) menu->name, "NoFliker");
+ return 0;
+ case V4L2_CID_POWER_LINE_FREQUENCY_50HZ:
+ strcpy((char *) menu->name, "50 Hz");
+ return 0;
+ case V4L2_CID_POWER_LINE_FREQUENCY_60HZ:
+ strcpy((char *) menu->name, "60 Hz");
+ return 0;
+ }
+ break;
+ }
+ return -EINVAL;
+}
+
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+ struct sd *sd = (struct sd *)gspca_dev;
+ u8 state;
+
+ if (len != 2)
+ return -EINVAL;
+
+ switch (data[0]) {
+ case 0:
+ case 1:
+ state = data[0];
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (sd->button_state != state) {
+ input_report_key(gspca_dev->input_dev, KEY_CAMERA, state);
+ input_sync(gspca_dev->input_dev);
+ sd->button_state = state;
+ }
+
+ return 0;
+}
+#endif
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .dq_callback = sd_dq_callback,
+ .pkt_scan = sd_pkt_scan,
+ .querymenu = sd_querymenu,
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+ .int_pkt_scan = sd_int_pkt_scan,
+#endif
+};
+
+/* -- module initialisation -- */
+static const struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x03e8, 0x0004)}, /* Endpoints/Aox SE401 */
+ {USB_DEVICE(0x0471, 0x030b)}, /* Philips PCVC665K */
+ {USB_DEVICE(0x047d, 0x5001)}, /* Kensington 67014 */
+ {USB_DEVICE(0x047d, 0x5002)}, /* Kensington 6701(5/7) */
+ {USB_DEVICE(0x047d, 0x5003)}, /* Kensington 67016 */
+ {}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static int sd_pre_reset(struct usb_interface *intf)
+{
+ return 0;
+}
+
+static int sd_post_reset(struct usb_interface *intf)
+{
+ return 0;
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
+ .pre_reset = sd_pre_reset,
+ .post_reset = sd_post_reset,
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ return usb_register(&sd_driver);
+}
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/se401.h b/drivers/media/video/gspca/se401.h
new file mode 100644
index 00000000000..96d8ebf3cf5
--- /dev/null
+++ b/drivers/media/video/gspca/se401.h
@@ -0,0 +1,90 @@
+/*
+ * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver
+ *
+ * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the v4l1 se401 driver which is:
+ *
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define SE401_REQ_GET_CAMERA_DESCRIPTOR 0x06
+#define SE401_REQ_START_CONTINUOUS_CAPTURE 0x41
+#define SE401_REQ_STOP_CONTINUOUS_CAPTURE 0x42
+#define SE401_REQ_CAPTURE_FRAME 0x43
+#define SE401_REQ_GET_BRT 0x44
+#define SE401_REQ_SET_BRT 0x45
+#define SE401_REQ_GET_WIDTH 0x4c
+#define SE401_REQ_SET_WIDTH 0x4d
+#define SE401_REQ_GET_HEIGHT 0x4e
+#define SE401_REQ_SET_HEIGHT 0x4f
+#define SE401_REQ_GET_OUTPUT_MODE 0x50
+#define SE401_REQ_SET_OUTPUT_MODE 0x51
+#define SE401_REQ_GET_EXT_FEATURE 0x52
+#define SE401_REQ_SET_EXT_FEATURE 0x53
+#define SE401_REQ_CAMERA_POWER 0x56
+#define SE401_REQ_LED_CONTROL 0x57
+#define SE401_REQ_BIOS 0xff
+
+#define SE401_BIOS_READ 0x07
+
+#define SE401_FORMAT_BAYER 0x40
+
+/* Hyundai hv7131b registers
+ 7121 and 7141 should be the same (haven't really checked...) */
+/* Mode registers: */
+#define HV7131_REG_MODE_A 0x00
+#define HV7131_REG_MODE_B 0x01
+#define HV7131_REG_MODE_C 0x02
+/* Frame registers: */
+#define HV7131_REG_FRSU 0x10
+#define HV7131_REG_FRSL 0x11
+#define HV7131_REG_FCSU 0x12
+#define HV7131_REG_FCSL 0x13
+#define HV7131_REG_FWHU 0x14
+#define HV7131_REG_FWHL 0x15
+#define HV7131_REG_FWWU 0x16
+#define HV7131_REG_FWWL 0x17
+/* Timing registers: */
+#define HV7131_REG_THBU 0x20
+#define HV7131_REG_THBL 0x21
+#define HV7131_REG_TVBU 0x22
+#define HV7131_REG_TVBL 0x23
+#define HV7131_REG_TITU 0x25
+#define HV7131_REG_TITM 0x26
+#define HV7131_REG_TITL 0x27
+#define HV7131_REG_TMCD 0x28
+/* Adjust Registers: */
+#define HV7131_REG_ARLV 0x30
+#define HV7131_REG_ARCG 0x31
+#define HV7131_REG_AGCG 0x32
+#define HV7131_REG_ABCG 0x33
+#define HV7131_REG_APBV 0x34
+#define HV7131_REG_ASLP 0x54
+/* Offset Registers: */
+#define HV7131_REG_OFSR 0x50
+#define HV7131_REG_OFSG 0x51
+#define HV7131_REG_OFSB 0x52
+/* REset level statistics registers: */
+#define HV7131_REG_LOREFNOH 0x57
+#define HV7131_REG_LOREFNOL 0x58
+#define HV7131_REG_HIREFNOH 0x59
+#define HV7131_REG_HIREFNOL 0x5a
+
+/* se401 registers */
+#define SE401_OPERATINGMODE 0x2000
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 81b8a600783..c477ad11f10 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -2386,7 +2386,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
reg_w1(gspca_dev, 0x01, 0x22);
msleep(100);
reg01 = SCL_SEL_OD | S_PDN_INV;
- reg17 &= MCK_SIZE_MASK;
+ reg17 &= ~MCK_SIZE_MASK;
reg17 |= 0x04; /* clock / 4 */
break;
}
@@ -2532,6 +2532,10 @@ static int sd_start(struct gspca_dev *gspca_dev)
if (!mode) { /* if 640x480 */
reg17 &= ~MCK_SIZE_MASK;
reg17 |= 0x04; /* clock / 4 */
+ } else {
+ reg01 &= ~SYS_SEL_48M; /* clk 24Mz */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x02; /* clock / 2 */
}
break;
case SENSOR_OV7630:
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index b089c0d3ee9..6ec23290218 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -247,7 +247,6 @@ static const struct cmd spca504A_clicksmart420_init_data[] = {
{0x30, 0x0004, 0x000a},
{0xb0, 0x0001, 0x0000},
-
{0xa1, 0x0080, 0x0001},
{0x30, 0x0049, 0x0000},
{0x30, 0x0060, 0x0005},
@@ -256,8 +255,6 @@ static const struct cmd spca504A_clicksmart420_init_data[] = {
{0x00, 0x0000, 0x2000},
{0x00, 0x0013, 0x2301},
{0x00, 0x0003, 0x2000},
- {0x00, 0x0000, 0x2000},
-
};
/* clicksmart 420 open data ? */
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 7e762d55109..d1d733b9359 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -1387,7 +1387,7 @@ static int sd_querymenu(struct gspca_dev *gspca_dev,
return 0;
case V4L2_CID_EFFECTS:
if ((unsigned) menu->index < ARRAY_SIZE(effects_control)) {
- strncpy((char *) menu->name,
+ strlcpy((char *) menu->name,
effects_control[menu->index],
sizeof menu->name);
return 0;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 08:42:31 +0000