summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/ir-kbd-gpio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/ir-kbd-gpio.c')
-rw-r--r--drivers/media/video/ir-kbd-gpio.c444
1 files changed, 400 insertions, 44 deletions
diff --git a/drivers/media/video/ir-kbd-gpio.c b/drivers/media/video/ir-kbd-gpio.c
index cf292da8fdd..6345e29e495 100644
--- a/drivers/media/video/ir-kbd-gpio.c
+++ b/drivers/media/video/ir-kbd-gpio.c
@@ -156,24 +156,164 @@ static IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = {
/* ---------------------------------------------------------------------- */
+/* Ricardo Cerqueira <v4l@cerqueira.org> */
+/* Weird matching, since the remote has "uncommon" keys */
+
+static IR_KEYTAB_TYPE ir_codes_conceptronic[IR_KEYTAB_SIZE] = {
+
+ [ 30 ] = KEY_POWER, // power
+ [ 7 ] = KEY_MEDIA, // source
+ [ 28 ] = KEY_SEARCH, // scan
+
+/* FIXME: duplicate keycodes?
+ *
+ * These four keys seem to share the same GPIO as CH+, CH-, <<< and >>>
+ * The GPIO values are
+ * 6397fb for both "Scan <" and "CH -",
+ * 639ffb for "Scan >" and "CH+",
+ * 6384fb for "Tune <" and "<<<",
+ * 638cfb for "Tune >" and ">>>", regardless of the mask.
+ *
+ * [ 23 ] = KEY_BACK, // fm scan <<
+ * [ 31 ] = KEY_FORWARD, // fm scan >>
+ *
+ * [ 4 ] = KEY_LEFT, // fm tuning <
+ * [ 12 ] = KEY_RIGHT, // fm tuning >
+ *
+ * For now, these four keys are disabled. Pressing them will generate
+ * the CH+/CH-/<<</>>> events
+ */
+
+ [ 3 ] = KEY_TUNER, // TV/FM
+
+ [ 0 ] = KEY_RECORD,
+ [ 8 ] = KEY_STOP,
+ [ 17 ] = KEY_PLAY,
+
+ [ 26 ] = KEY_PLAYPAUSE, // freeze
+ [ 25 ] = KEY_ZOOM, // zoom
+ [ 15 ] = KEY_TEXT, // min
+
+ [ 1 ] = KEY_KP1,
+ [ 11 ] = KEY_KP2,
+ [ 27 ] = KEY_KP3,
+ [ 5 ] = KEY_KP4,
+ [ 9 ] = KEY_KP5,
+ [ 21 ] = KEY_KP6,
+ [ 6 ] = KEY_KP7,
+ [ 10 ] = KEY_KP8,
+ [ 18 ] = KEY_KP9,
+ [ 2 ] = KEY_KP0,
+ [ 16 ] = KEY_LAST, // +100
+ [ 19 ] = KEY_LIST, // recall
+
+ [ 31 ] = KEY_CHANNELUP, // chn down
+ [ 23 ] = KEY_CHANNELDOWN, // chn up
+ [ 22 ] = KEY_VOLUMEUP, // vol down
+ [ 20 ] = KEY_VOLUMEDOWN, // vol up
+
+ [ 4 ] = KEY_KPMINUS, // <<<
+ [ 14 ] = KEY_SETUP, // function
+ [ 12 ] = KEY_KPPLUS, // >>>
+
+ [ 13 ] = KEY_GOTO, // mts
+ [ 29 ] = KEY_REFRESH, // reset
+ [ 24 ] = KEY_MUTE // mute/unmute
+};
+
+static IR_KEYTAB_TYPE ir_codes_nebula[IR_KEYTAB_SIZE] = {
+ [0x00] = KEY_KP0,
+ [0x01] = KEY_KP1,
+ [0x02] = KEY_KP2,
+ [0x03] = KEY_KP3,
+ [0x04] = KEY_KP4,
+ [0x05] = KEY_KP5,
+ [0x06] = KEY_KP6,
+ [0x07] = KEY_KP7,
+ [0x08] = KEY_KP8,
+ [0x09] = KEY_KP9,
+ [0x0a] = KEY_TV,
+ [0x0b] = KEY_AUX,
+ [0x0c] = KEY_DVD,
+ [0x0d] = KEY_POWER,
+ [0x0e] = KEY_MHP, /* labelled 'Picture' */
+ [0x0f] = KEY_AUDIO,
+ [0x10] = KEY_INFO,
+ [0x11] = KEY_F13, /* 16:9 */
+ [0x12] = KEY_F14, /* 14:9 */
+ [0x13] = KEY_EPG,
+ [0x14] = KEY_EXIT,
+ [0x15] = KEY_MENU,
+ [0x16] = KEY_UP,
+ [0x17] = KEY_DOWN,
+ [0x18] = KEY_LEFT,
+ [0x19] = KEY_RIGHT,
+ [0x1a] = KEY_ENTER,
+ [0x1b] = KEY_CHANNELUP,
+ [0x1c] = KEY_CHANNELDOWN,
+ [0x1d] = KEY_VOLUMEUP,
+ [0x1e] = KEY_VOLUMEDOWN,
+ [0x1f] = KEY_RED,
+ [0x20] = KEY_GREEN,
+ [0x21] = KEY_YELLOW,
+ [0x22] = KEY_BLUE,
+ [0x23] = KEY_SUBTITLE,
+ [0x24] = KEY_F15, /* AD */
+ [0x25] = KEY_TEXT,
+ [0x26] = KEY_MUTE,
+ [0x27] = KEY_REWIND,
+ [0x28] = KEY_STOP,
+ [0x29] = KEY_PLAY,
+ [0x2a] = KEY_FASTFORWARD,
+ [0x2b] = KEY_F16, /* chapter */
+ [0x2c] = KEY_PAUSE,
+ [0x2d] = KEY_PLAY,
+ [0x2e] = KEY_RECORD,
+ [0x2f] = KEY_F17, /* picture in picture */
+ [0x30] = KEY_KPPLUS, /* zoom in */
+ [0x31] = KEY_KPMINUS, /* zoom out */
+ [0x32] = KEY_F18, /* capture */
+ [0x33] = KEY_F19, /* web */
+ [0x34] = KEY_EMAIL,
+ [0x35] = KEY_PHONE,
+ [0x36] = KEY_PC
+};
+
struct IR {
struct bttv_sub_device *sub;
- struct input_dev input;
+ struct input_dev *input;
struct ir_input_state ir;
char name[32];
char phys[32];
+
+ /* Usual gpio signalling */
+
u32 mask_keycode;
u32 mask_keydown;
u32 mask_keyup;
-
- int polling;
+ u32 polling;
u32 last_gpio;
struct work_struct work;
struct timer_list timer;
+
+ /* RC5 gpio */
+
+ u32 rc5_gpio;
+ struct timer_list timer_end; /* timer_end for code completion */
+ struct timer_list timer_keyup; /* timer_end for key release */
+ u32 last_rc5; /* last good rc5 code */
+ u32 last_bit; /* last raw bit seen */
+ u32 code; /* raw code under construction */
+ struct timeval base_time; /* time of last seen code */
+ int active; /* building raw code */
};
static int debug;
module_param(debug, int, 0644); /* debug level (0,1,2) */
+static int repeat_delay = 500;
+module_param(repeat_delay, int, 0644);
+static int repeat_period = 33;
+module_param(repeat_period, int, 0644);
#define DEVNAME "ir-kbd-gpio"
#define dprintk(fmt, arg...) if (debug) \
@@ -189,7 +329,7 @@ static struct bttv_sub_driver driver = {
.probe = ir_probe,
.remove = ir_remove,
},
- .gpio_irq = ir_irq,
+ .gpio_irq = ir_irq,
};
/* ---------------------------------------------------------------------- */
@@ -217,23 +357,23 @@ static void ir_handle_key(struct IR *ir)
if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown) {
- ir_input_keydown(&ir->input,&ir->ir,data,data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup)) {
- ir_input_keydown(&ir->input,&ir->ir,data,data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else {
/* can't disturgissh keydown/up :-/ */
- ir_input_keydown(&ir->input,&ir->ir,data,data);
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_nokey(ir->input, &ir->ir);
}
}
@@ -262,78 +402,270 @@ static void ir_work(void *data)
mod_timer(&ir->timer, timeout);
}
+/* ---------------------------------------------------------------*/
+
+static int rc5_remote_gap = 885;
+module_param(rc5_remote_gap, int, 0644);
+static int rc5_key_timeout = 200;
+module_param(rc5_key_timeout, int, 0644);
+
+#define RC5_START(x) (((x)>>12)&3)
+#define RC5_TOGGLE(x) (((x)>>11)&1)
+#define RC5_ADDR(x) (((x)>>6)&31)
+#define RC5_INSTR(x) ((x)&63)
+
+/* decode raw bit pattern to RC5 code */
+static u32 rc5_decode(unsigned int code)
+{
+ unsigned int org_code = code;
+ unsigned int pair;
+ unsigned int rc5 = 0;
+ int i;
+
+ code = (code << 1) | 1;
+ for (i = 0; i < 14; ++i) {
+ pair = code & 0x3;
+ code >>= 2;
+
+ rc5 <<= 1;
+ switch (pair) {
+ case 0:
+ case 2:
+ break;
+ case 1:
+ rc5 |= 1;
+ break;
+ case 3:
+ dprintk("bad code: %x\n", org_code);
+ return 0;
+ }
+ }
+ dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+ "instr=%x\n", rc5, org_code, RC5_START(rc5),
+ RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+ return rc5;
+}
+
+static int ir_rc5_irq(struct bttv_sub_device *sub)
+{
+ struct IR *ir = dev_get_drvdata(&sub->dev);
+ struct timeval tv;
+ u32 gpio;
+ u32 gap;
+ unsigned long current_jiffies, timeout;
+
+ /* read gpio port */
+ gpio = bttv_gpio_read(ir->sub->core);
+
+ /* remote IRQ? */
+ if (!(gpio & 0x20))
+ return 0;
+
+ /* get time of bit */
+ current_jiffies = jiffies;
+ do_gettimeofday(&tv);
+
+ /* avoid overflow with gap >1s */
+ if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+ gap = 200000;
+ } else {
+ gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+ tv.tv_usec - ir->base_time.tv_usec;
+ }
+
+ /* active code => add bit */
+ if (ir->active) {
+ /* only if in the code (otherwise spurious IRQ or timer
+ late) */
+ if (ir->last_bit < 28) {
+ ir->last_bit = (gap - rc5_remote_gap / 2) /
+ rc5_remote_gap;
+ ir->code |= 1 << ir->last_bit;
+ }
+ /* starting new code */
+ } else {
+ ir->active = 1;
+ ir->code = 0;
+ ir->base_time = tv;
+ ir->last_bit = 0;
+
+ timeout = current_jiffies + (500 + 30 * HZ) / 1000;
+ mod_timer(&ir->timer_end, timeout);
+ }
+
+ /* toggle GPIO pin 4 to reset the irq */
+ bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4));
+ bttv_gpio_write(ir->sub->core, gpio | (1 << 4));
+ return 1;
+}
+
+static void ir_rc5_timer_end(unsigned long data)
+{
+ struct IR *ir = (struct IR *)data;
+ struct timeval tv;
+ unsigned long current_jiffies, timeout;
+ u32 gap;
+
+ /* get time */
+ current_jiffies = jiffies;
+ do_gettimeofday(&tv);
+
+ /* avoid overflow with gap >1s */
+ if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+ gap = 200000;
+ } else {
+ gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+ tv.tv_usec - ir->base_time.tv_usec;
+ }
+
+ /* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
+ if (gap < 28000) {
+ dprintk("spurious timer_end\n");
+ return;
+ }
+
+ ir->active = 0;
+ if (ir->last_bit < 20) {
+ /* ignore spurious codes (caused by light/other remotes) */
+ dprintk("short code: %x\n", ir->code);
+ } else {
+ u32 rc5 = rc5_decode(ir->code);
+
+ /* two start bits? */
+ if (RC5_START(rc5) != 3) {
+ dprintk("rc5 start bits invalid: %u\n", RC5_START(rc5));
+
+ /* right address? */
+ } else if (RC5_ADDR(rc5) == 0x0) {
+ u32 toggle = RC5_TOGGLE(rc5);
+ u32 instr = RC5_INSTR(rc5);
+
+ /* Good code, decide if repeat/repress */
+ if (toggle != RC5_TOGGLE(ir->last_rc5) ||
+ instr != RC5_INSTR(ir->last_rc5)) {
+ dprintk("instruction %x, toggle %x\n", instr,
+ toggle);
+ ir_input_nokey(ir->input, &ir->ir);
+ ir_input_keydown(ir->input, &ir->ir, instr,
+ instr);
+ }
+
+ /* Set/reset key-up timer */
+ timeout = current_jiffies + (500 + rc5_key_timeout
+ * HZ) / 1000;
+ mod_timer(&ir->timer_keyup, timeout);
+
+ /* Save code for repeat test */
+ ir->last_rc5 = rc5;
+ }
+ }
+}
+
+static void ir_rc5_timer_keyup(unsigned long data)
+{
+ struct IR *ir = (struct IR *)data;
+
+ dprintk("key released\n");
+ ir_input_nokey(ir->input, &ir->ir);
+}
+
/* ---------------------------------------------------------------------- */
static int ir_probe(struct device *dev)
{
struct bttv_sub_device *sub = to_bttv_sub_dev(dev);
struct IR *ir;
+ struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
int ir_type = IR_TYPE_OTHER;
- ir = kmalloc(sizeof(*ir),GFP_KERNEL);
- if (NULL == ir)
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ kfree(ir);
+ input_free_device(input_dev);
return -ENOMEM;
- memset(ir,0,sizeof(*ir));
+ }
/* detect & configure */
switch (sub->core->type) {
- case BTTV_AVERMEDIA:
- case BTTV_AVPHONE98:
- case BTTV_AVERMEDIA98:
+ case BTTV_BOARD_AVERMEDIA:
+ case BTTV_BOARD_AVPHONE98:
+ case BTTV_BOARD_AVERMEDIA98:
ir_codes = ir_codes_avermedia;
ir->mask_keycode = 0xf88000;
ir->mask_keydown = 0x010000;
ir->polling = 50; // ms
break;
- case BTTV_AVDVBT_761:
- case BTTV_AVDVBT_771:
+ case BTTV_BOARD_AVDVBT_761:
+ case BTTV_BOARD_AVDVBT_771:
ir_codes = ir_codes_avermedia_dvbt;
ir->mask_keycode = 0x0f00c0;
ir->mask_keydown = 0x000020;
ir->polling = 50; // ms
break;
- case BTTV_PXELVWPLTVPAK:
+ case BTTV_BOARD_PXELVWPLTVPAK:
ir_codes = ir_codes_pixelview;
ir->mask_keycode = 0x003e00;
ir->mask_keyup = 0x010000;
ir->polling = 50; // ms
- break;
- case BTTV_PV_BT878P_9B:
- case BTTV_PV_BT878P_PLUS:
+ break;
+ case BTTV_BOARD_PV_BT878P_9B:
+ case BTTV_BOARD_PV_BT878P_PLUS:
ir_codes = ir_codes_pixelview;
ir->mask_keycode = 0x001f00;
ir->mask_keyup = 0x008000;
ir->polling = 50; // ms
- break;
+ break;
- case BTTV_WINFAST2000:
+ case BTTV_BOARD_WINFAST2000:
ir_codes = ir_codes_winfast;
ir->mask_keycode = 0x1f8;
break;
- case BTTV_MAGICTVIEW061:
- case BTTV_MAGICTVIEW063:
+ case BTTV_BOARD_MAGICTVIEW061:
+ case BTTV_BOARD_MAGICTVIEW063:
ir_codes = ir_codes_winfast;
ir->mask_keycode = 0x0008e000;
ir->mask_keydown = 0x00200000;
break;
- case BTTV_APAC_VIEWCOMP:
+ case BTTV_BOARD_APAC_VIEWCOMP:
ir_codes = ir_codes_apac_viewcomp;
ir->mask_keycode = 0x001f00;
ir->mask_keyup = 0x008000;
ir->polling = 50; // ms
break;
+ case BTTV_BOARD_CONCEPTRONIC_CTVFMI2:
+ ir_codes = ir_codes_conceptronic;
+ ir->mask_keycode = 0x001F00;
+ ir->mask_keyup = 0x006000;
+ ir->polling = 50; // ms
+ break;
+ case BTTV_BOARD_NEBULA_DIGITV:
+ ir_codes = ir_codes_nebula;
+ driver.any_irq = ir_rc5_irq;
+ driver.gpio_irq = NULL;
+ ir->rc5_gpio = 1;
+ break;
}
if (NULL == ir_codes) {
kfree(ir);
+ input_free_device(input_dev);
return -ENODEV;
}
- /* init hardware-specific stuff */
- bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0);
- ir->sub = sub;
+ if (ir->rc5_gpio) {
+ u32 gpio;
+ /* enable remote irq */
+ bttv_gpio_inout(sub->core, (1 << 4), 1 << 4);
+ gpio = bttv_gpio_read(sub->core);
+ bttv_gpio_write(sub->core, gpio & ~(1 << 4));
+ bttv_gpio_write(sub->core, gpio | (1 << 4));
+ } else {
+ /* init hardware-specific stuff */
+ bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0);
+ }
/* init input device */
snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
@@ -341,19 +673,22 @@ static int ir_probe(struct device *dev)
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(sub->core->pci));
- ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes);
- ir->input.name = ir->name;
- ir->input.phys = ir->phys;
- ir->input.id.bustype = BUS_PCI;
- ir->input.id.version = 1;
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
if (sub->core->pci->subsystem_vendor) {
- ir->input.id.vendor = sub->core->pci->subsystem_vendor;
- ir->input.id.product = sub->core->pci->subsystem_device;
+ input_dev->id.vendor = sub->core->pci->subsystem_vendor;
+ input_dev->id.product = sub->core->pci->subsystem_device;
} else {
- ir->input.id.vendor = sub->core->pci->vendor;
- ir->input.id.product = sub->core->pci->device;
+ input_dev->id.vendor = sub->core->pci->vendor;
+ input_dev->id.product = sub->core->pci->device;
}
- ir->input.dev = &sub->core->pci->dev;
+ input_dev->cdev.dev = &sub->core->pci->dev;
+
+ ir->input = input_dev;
+ ir->sub = sub;
if (ir->polling) {
INIT_WORK(&ir->work, ir_work, ir);
@@ -361,12 +696,24 @@ static int ir_probe(struct device *dev)
ir->timer.function = ir_timer;
ir->timer.data = (unsigned long)ir;
schedule_work(&ir->work);
+ } else if (ir->rc5_gpio) {
+ /* set timer_end for code completion */
+ init_timer(&ir->timer_end);
+ ir->timer_end.function = ir_rc5_timer_end;
+ ir->timer_end.data = (unsigned long)ir;
+
+ init_timer(&ir->timer_keyup);
+ ir->timer_keyup.function = ir_rc5_timer_keyup;
+ ir->timer_keyup.data = (unsigned long)ir;
}
/* all done */
- dev_set_drvdata(dev,ir);
- input_register_device(&ir->input);
- printk(DEVNAME ": %s detected at %s\n",ir->input.name,ir->input.phys);
+ dev_set_drvdata(dev, ir);
+ input_register_device(ir->input);
+
+ /* the remote isn't as bouncy as a keyboard */
+ ir->input->rep[REP_DELAY] = repeat_delay;
+ ir->input->rep[REP_PERIOD] = repeat_period;
return 0;
}
@@ -379,8 +726,17 @@ static int ir_remove(struct device *dev)
del_timer(&ir->timer);
flush_scheduled_work();
}
+ if (ir->rc5_gpio) {
+ u32 gpio;
+
+ del_timer(&ir->timer_end);
+ flush_scheduled_work();
+
+ gpio = bttv_gpio_read(ir->sub->core);
+ bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4));
+ }
- input_unregister_device(&ir->input);
+ input_unregister_device(ir->input);
kfree(ir);
return 0;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-10 14:44:59 +0000