1 files changed, 27 insertions, 56 deletions

diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c
index 3248ac80571..ba25e8e2ba4 100644
--- a/drivers/media/video/m5mols/m5mols_capture.c
+++ b/drivers/media/video/m5mols/m5mols_capture.c
@@ -1,3 +1,4 @@
+
 /*
  * The Capture code for Fujitsu M-5MOLS ISP
  *
@@ -25,26 +26,11 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-subdev.h>
 #include <media/m5mols.h>
+#include <media/s5p_fimc.h>
 
 #include "m5mols.h"
 #include "m5mols_reg.h"
 
-static int m5mols_capture_error_handler(struct m5mols_info *info,
-					int timeout)
-{
-	int ret;
-
-	/* Disable all interrupts and clear relevant interrupt staus bits */
-	ret = m5mols_write(&info->sd, SYSTEM_INT_ENABLE,
-			   info->interrupt & ~(REG_INT_CAPTURE));
-	if (ret)
-		return ret;
-
-	if (timeout == 0)
-		return -ETIMEDOUT;
-
-	return 0;
-}
 /**
  * m5mols_read_rational - I2C read of a rational number
  *
@@ -121,69 +107,54 @@ int m5mols_start_capture(struct m5mols_info *info)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	u8 resolution = info->resolution;
-	int timeout;
 	int ret;
 
 	/*
-	 * Preparing capture. Setting control & interrupt before entering
-	 * capture mode
-	 *
-	 * 1) change to MONITOR mode for operating control & interrupt
-	 * 2) set controls (considering v4l2_control value & lock 3A)
-	 * 3) set interrupt
-	 * 4) change to CAPTURE mode
+	 * Synchronize the controls, set the capture frame resolution and color
+	 * format. The frame capture is initiated during switching from Monitor
+	 * to Capture mode.
 	 */
 	ret = m5mols_mode(info, REG_MONITOR);
 	if (!ret)
-		ret = m5mols_sync_controls(info);
+		ret = m5mols_restore_controls(info);
 	if (!ret)
-		ret = m5mols_lock_3a(info, true);
+		ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, resolution);
 	if (!ret)
-		ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
+		ret = m5mols_lock_3a(info, true);
 	if (!ret)
 		ret = m5mols_mode(info, REG_CAPTURE);
-	if (!ret) {
-		/* Wait for capture interrupt, after changing capture mode */
-		timeout = wait_event_interruptible_timeout(info->irq_waitq,
-					   test_bit(ST_CAPT_IRQ, &info->flags),
-					   msecs_to_jiffies(2000));
-		if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags))
-			ret = m5mols_capture_error_handler(info, timeout);
-	}
+	if (!ret)
+		/* Wait until a frame is captured to ISP internal memory */
+		ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000);
 	if (!ret)
 		ret = m5mols_lock_3a(info, false);
 	if (ret)
 		return ret;
+
 	/*
-	 * Starting capture. Setting capture frame count and resolution and
-	 * the format(available format: JPEG, Bayer RAW, YUV).
-	 *
-	 * 1) select single or multi(enable to 25), format, size
-	 * 2) set interrupt
-	 * 3) start capture(for main image, now)
-	 * 4) get information
-	 * 5) notify file size to v4l2 device(e.g, to s5p-fimc v4l2 device)
+	 * Initiate the captured data transfer to a MIPI-CSI receiver.
 	 */
 	ret = m5mols_write(sd, CAPC_SEL_FRAME, 1);
 	if (!ret)
-		ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG);
-	if (!ret)
-		ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, resolution);
-	if (!ret)
-		ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
-	if (!ret)
 		ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN);
 	if (!ret) {
+		bool captured = false;
+		unsigned int size;
+
 		/* Wait for the capture completion interrupt */
-		timeout = wait_event_interruptible_timeout(info->irq_waitq,
-					   test_bit(ST_CAPT_IRQ, &info->flags),
-					   msecs_to_jiffies(2000));
-		if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags)) {
+		ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000);
+		if (!ret) {
+			captured = true;
 			ret = m5mols_capture_info(info);
-			if (!ret)
-				v4l2_subdev_notify(sd, 0, &info->cap.total);
 		}
+		size = captured ? info->cap.main : 0;
+		v4l2_dbg(1, m5mols_debug, sd, "%s: size: %d, thumb.: %d B\n",
+			 __func__, size, info->cap.thumb);
+
+		v4l2_subdev_notify(sd, S5P_FIMC_TX_END_NOTIFY, &size);
 	}
 
-	return m5mols_capture_error_handler(info, timeout);
+	return ret;
 }